Add a little button on beside the title of jtabbledPane

how can I add a little button on the top of the jtabbledPane, right beside of the string, so if the user click the button , the jtabbedPane which have an editor as Component will be closed?
thanks.

make an icon for your button, and use it in the addTab method. You can detect if they click on the tab by using getBoundsAt in a MouseListener.

Similar Messages

Compaq Laptop CQ60-615DX Little white light beside the dc jack blinking repeatedly non-stop

Compaq Laptop CQ60-615DX white light next to where you plug in the power cable keeps blinking. Never stops Blinking. Computer doesn't power on.
The DC jack is loose, took the laptop apart, pressed down on the dc jack to hold it in place, and stuck the power cable back in. Tried to wiggle the cable around to see if the jack is bad. But it feels pretty solid, it's just the housing holding the dc jack in place that's broken.
But I'm still getting the little white light beside the dc jack blinking repeatedly non-stop. No system power.
Question is.
1. Is the DC power jack bad and needs to be replaced or.
2. There is a short in the motherboard and the motherboard needs to be replaced.
I have check all over the internet for what the white light blinking means. I've found no answer.
Could someone please tell me what is wrong with this computer?

I already encouted this problem yesterday and I want to share this information on how I was able to fix this issue where in the dc jack blinking repeatedly and the laptop wont turn on. This issue is resulted due to overheat so laptop automatically shutdown and results to some kind of hibernation.
1. First you need to dissamble your laptop (compaq cq60). To clean the exhaust fan. I cleaned it because it was very dirty. I used my laptop for almost five years. If you dont know how to dissamble your laptop, you can check the tutorial from youtube. Just be very careful.
2. After Removing all the parts you can use a brush to remove all the dust inside your laptop. After cleaning all the dirt inside the laptop you need to let the motherboard cool for 1 to 1.5 hrs.
3. When you put the dc jack dont put the battery. So once you plugged the DC jack you can see if the light beside the jack still blinking or steady.
4. Once the light is steady., you can now power on your laptop. and a message will appear that your laptop overheated.
5. You can use cooling fan to prevent from heating.
6. Clean the parts inside your laptop every half year. to remove dust that cause the exhaust fan not to work properly.
Now I was able to use my laptop again.
Best Regards to All!
Algerico

Use that little button to engage the tab list There is a tiny little button, you may have been ignoring. It does something wonderful. It looks like a really sm

I am using Firefox Version 17. Previous versions had a triangle on the right end of the toolbar that would show a list of tabs open on the window. I no longer see it.
It was described in the "Help" instructions as follows:
There is a tiny little button, you may have been ignoring. It does something wonderful. It looks like a really small downward triangle. Use that little button to engage the tab list.

See also:
* Permanent List-all-tabs Button: https://addons.mozilla.org/firefox/addon/permanent-listalltabs/

Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox

Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox account, no password prompted and account is online and enabled... Thoughts?

Have you tried clicking on the lock to see it it will then ask for a passwored. Otherwise, try reblooting.

Add another mail login page besides the default mail login page

I want to add another mail login page besides the default mail login page(http://mail.mine.com). This should be accessed as:http://mail.mine.com/soo.htm.
I will keep the default page available too.
Is this possible? where to put this new page? How to config this?
Thanks!!!

If it works, then you have found it.
I make no claims to be a javascript programmer, nor do I claim to program html code.
If it doesn't work, you may need to remember that Messaging Express isn't really a web server, it's only a piece of one. . .

Why is the new ios7 alarm clock snooze button right beside the off botton? Seriously have we not been here before

New ios7 alarm snooze button right beside off button. This will cause me problems . Will hit off a often as I hit snooze. Taught this was sorted on ios6 .

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

One of my iTunes songs has an "!" beside the title and I can't play it; where did it go?

I just tried to play one of my iTunes songs, and it is showing up with either an "!" or an "i" beside it. I can see the title but it is in light gray and when I try clicking on it, it says it's not there.
I had this problem a while back, when the memory was really low on the computer, but that's not the problem today.
HELP!!!
Thanks so much!

Actually, I fixed it, but am not sure why it had the "!" in the first place.
I went to the external hard drive, Time Machine back up, and found it there.
Was able to play it from there, then just dragged it to the iTunes icon on my desktop.
As I said, I have no idea how this song got there. It's a case of having 2 of the same song, one with vocals and one with accompaniment. The accompaniment version was there, but the vocal is the one that was messed up.
Not sure if there are other songs in my iTunes with the same problem or not---sure hope not!
Thanks so much for your quick response, though!

A suggestion for the mouse setting through persistence via SkyDrive/OneDrive: Add a check button to let the user tell if the mouse settings should be "restored" every time the user logs in a "different" computer using the same Microsoft Account.

Every time I log in one of my 2 computers with Microsoft Account, I have to change the main button (left/right) setting, because the settings persistence via SkyDrive/OneDrive.
I have different main mouse button settings in the computers.
Those settings shouldn't be changed, if the account is not a new one, after all, if the user has different settings in old accounts, it means there must be a reason to do it (because of hardware and/or furniture restriction).
Thus, a check button in the mouse settings' window that let the user tell if it should be changed or not would be welcomed.

Every time I log in one of my 2 computers with Microsoft Account, I have to change the main button (left/right) setting, because the settings persistence via SkyDrive/OneDrive.
I have different main mouse button settings in the computers.
Those settings shouldn't be changed, if the account is not a new one, after all, if the user has different settings in old accounts, it means there must be a reason to do it (because of hardware and/or furniture restriction).
Thus, a check button in the mouse settings' window that let the user tell if it should be changed or not would be welcomed.

[All Platforms][Other] Add "Delete Account" button like all the other major services

Facebook, Twitter, you name it, they all have a delete accout link or button in the account settings. Spotify, what are you afraid of? Please add.

Updated: 2015-07-17Hi and thanks for your contribution! A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Account-Delete-your-account-from-Profile-Settings/idi-p/1149151
Add your kudos and comments there please!

How to add a mute button without using the default skin?

I want to use a mute/unmute button for my current project which does not use the default skin. I searched the web and found the following solution.
http://kb2.adobe.com/cps/163/2ed9f163.html
I followed the instruction and it works fine on single slide. The problem is that it does not carry through the whole project. If I mute the first slide, the audio is on again on the next slide. My mute/unmute setting doesn't go to the next slide.
Any one have a solution to this problem? Any help or tips are greatly appreciated.

Hi there
Did you pay close attention to step 4?
Click image to see larger...
Addtionally, your post reads as if you feel the mute button is only avaliable with the Default playback control set. Note that there are all sorts of options with the supplied playback controls that offer enabling a mute button.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

When I sync my iPhone 4 (iOS 7) with my computer, the iTunes does not show "iPhone" button right beside the "iTunes Store" button.

Also, iTunes does not detect any device connected to the computer.

Hi, Arthur330.
Thank you for the question. I am unsure if you are having the issue with your device not being recognized on a Windows or Mac computer so I will include the troubleshooting articles for both below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Jason H.

How do I add a FullScreen button to Project Playback Skin?

How do I add a fullscreen button to the project playback skin? I know how to load another skin (using Project -> Skin Editor) and how to add a custom playback skin (paste custom skin SWF into C:\Program Files\Adobe\Adobe Captivate 5\en_US\Gallery\Playbars) but I'm having a little trouble figuring out how to add a fullscreen button when editing the Flash AS3 so that it will show up in my custom playback skin when loaded into Captivate via Project->Skin Editor. Any ideas?

Hi there
I might assume that seeing as you were able to work the magick with the CC button it would be a simple task to pick apart the other elements and add the desired button without hijacking the CC button.
I mean, if you are that deep in Flash territory and all, it doesn't seem like much of a stretch to figure out how the buttons are added, no?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Add an excel button to a standard iview (MSS)

Hi all,
I'm working with MSS 6.0 EHP2.
I need to add an excel button for downloading the content from a table of a standard scenario of MSS.
Do you know if there is a way to do it??
I'm talking about ECM (compensation) scenarios.
Thanks in advance.
Juanjo

I don't know where you are getting these tutorials, but they sound like they are very, very old. Along with not using AS2, you shouldn't be using scenes. Scenes are a left over method from the very earliest versions of Flash.
The objective in preloading content is that you are loading in new content before the user needs it. If you are doing this loading well, the user will not know that the operation went on. Any sort of loading screen should only be seen if the user calls for content that has not loaded yet. Your design objective should be to show something to the user as quickly as possible when the user hits your site. Load in your additional content and then let the user experience your site.
If you create a button on the stage in the same frame as your preloader object and name that button "enter_btn", then the code that you've shown above should do what you want.
I haven't used AS2 in many years. I don't remember a lot about its syntax, but from what I read of your code, it looks like you are measuring the loading of the file that contains the preloader object. This methodology can lead to a problem. When Flash begins working, a certain amount of the movie has to load before anything is seen on the screen. This means that the loading telltale that you have set up in your code will never show "0%", and probably not even "50%".
Here's a good tutorial that uses AS3 and fully explains the code and how the loader operates: http://flashexplained.com/preloaders/basic-loading-bar-preloader/
Here's another: http://www.republicofcode.com/tutorials/flash/as3preloader/
And here's a third: http://flashexplained.com/preloaders/making-the-complete-internal-preloader-in-flash-8-wit h-a-loading-bar-and-mathematical-preloaders/
Take a look at those examples and compare and contrast their methods.

"Add media queries" button disabled

Hi,
I've downloaded the pack and everything else seems to work fine, but when I enter in the multiscreen preview window, the add media queries button is disabled (the viewport sizes is active) and I can't find any other way to bring up the menu for the css selection based on screen width.
Am I missing something? Or is there some incompatibility when using the pack in English while having the main software in Spanish?
Thanks.

The HTML5 Pack should work fine with the Spanish version of DW. What OS are you using? What language is your OS (English, Spanish)?
There is a known issue where the Add Media Queries button is sometimes disabled if you are in Live View and the URL in the Browser Navigation toolbar Address field starts with "http://". If you close the file and then re-open it a few times, the Add Media Queries button should eventually become enabled. It's kind of a random problem.
Please let us know if this helps or not to enable the Add Media Queries button.
Thanks,
David Alcala
Dreamweaver QE

Row Level PPR in Advanced Table with Add More Rows Button

<br>
I have programmatically fired PPR event on MessageChoice. But it is in Advanced Table with
Add More Rows Button. When the value is changed in MessageChoice I Show/Hide Custom LOV
through SPEL like this ${oa.BioEmployeePVO.EmpManagerRender} .
But it is <b>hiding the all the ROWS</b> not just the row where the value has been changed.
I even tried with this code and get NULL for rowReference.
String rowReference = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
In Processrequest()
String pageName = pageContext.getRootRegionCode();
     Hashtable params = new Hashtable (1);
     params.put ("param1", pageName);
     Hashtable paramsWithBinds = new Hashtable(1);
    paramsWithBinds.put ("param2",new OADataBoundValueFireActionURL (mcb, "{$AttendeeType}"));
    mcb.setFireActionForSubmit ("empPositionChange", params, paramsWithBinds,false, false);
In ProcessFormRequest() {
if ("empPositionChange".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
      String rowReference = pageContext.getParameter("param2");
    //    String rowReference = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
     Serializable[] parameters = { rowReference };
      am.invokeMethod("handlePositionChangeEvent", parameters);
<br>

HI Kumar,
Answer to your last post is "yes".
Now to your doubt regarding the code:
Hi Anna
I am trying to understand your code.
FireAction firePartialAction = new FirePartialAction("fireHideEvent"+(i/noOfTlaColSpan));
HideImgBean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR,firePartialAction);
1. What is this i/noOfTlaColSpan ?
:)Forget abt this in your case it should be the event name which u r firing and capturing the it in the PFR.
Like FireAction firePartialAction = new FirePartialAction("YOurEventName");
and in PFR u can capture tht as:
if("YOurEventName".equals(pageContext.getParameter(EVENT_PARAM)))
//your logic to invoke AM method
2. I believe this HideImgBean would be MessageChoice for me?
:)Yep ur right
3. This brcdOhInventoryViewUpdateVOImpl would be the Custom PVO(Extending Seeded Base VO)
I create by adding the transient attributes?
:)Yep ur right
4. I cannot understand this code. Could you explain.
:)Please look at my comments in some of the lines .I have explained wht i am doing
if(updateIter==null)
updateIter[0]= invViewVO.createRowSetIterator("updateIter");//This initViewVo should be ur custom VO object
if(cnt>0)
updateIter[0].setRangeStart(0);
updateIter[0].setRangeSize(cnt);
for(int i=0;i<cnt;i++)
row = (brcdOhInventoryViewUpdateVORowImpl)updateIter[0].getRowAtRangeIndex(i);
String selectFlag=(String)row.invokeMethod("getPartNumber");//This getPartNuber should be replaced by the Prim Key inoke methd of ur VO
if(RowID.equals(selectFlag))
//This is my logic to set the transient attributes based on the msgChoiceBean value ..u have to pass the value when u invoke this method
if(reserveMethod.equals("BINARY"))
System.out.println("In Binary");
Boolean bVal= new Boolean("false");
Serializable sr[]={bVal};
Class []methodParamTypes = { bVal.getClass() };
row.invokeMethod("setshowreservetxt",sr,methodParamTypes);
Boolean bVal1= new Boolean("true");
System.out.println("bVal1"+bVal1);
Serializable sr1[]={bVal1};
Class []methodParamTypes1 = { bVal1.getClass() };
row.invokeMethod("setShowreservemsgchoice",sr1,methodParamTypes1);
break;
In my AM I am doing this. Am i doing right?:)Yep u r right
BioPrescribersPVO is the custom VO(extending seeded base VO).
public void handlePositionChangeEvent(String param)
OAViewObject vo = (OAViewObject)findViewObject("BioPrescribersPVO");
OARow row = (OARow)findRowByRef(rowReference);
if (row != null)
String position = (String)row.getAttribute("AttendeeType");
if (("PRESCRIBER".equals(position)) )
// BioEmpManagerRender is the transient attribute in BioPrescribersPVO.
row.setAttribute("BioEmpManagerRender", Boolean.TRUE);
row.setAttribute("BioPresManagerRender", Boolean.FALSE);
else
row.setAttribute("BioEmpManagerRender", Boolean.FALSE);
row.setAttribute("BioPresManagerRender", Boolean.TRUE);
} // end handlePositionChangeEvent()
// Initializing the custom VO
/*No need to initialize the VO because this is not a PVO(Propeties View object)
U r just using the existing VO and tht vo shloud have a primary key.Tht way u can match the rowref u r getting with the actual row from the View object*/
public void init()
OAViewObject appPropsVO = (OAViewObject)getBioPrescribersPVO();
if (appPropsVO != null)
if (appPropsVO.getFetchedRowCount() == 0)
appPropsVO.setMaxFetchSize(0); appPropsVO.executeQuery();
appPropsVO.insertRow(appPropsVO.createRow());
OARow row = (OARow)appPropsVO.first();
row.setAttribute("RowKey", new Number(1));
handlePositionChangeEvent("");
} // end init()
Thanks
Anna

Add a little button on beside the title of jtabbledPane

Similar Messages

Maybe you are looking for