Add a new column into repository

hi
In BI11g, how to add a new column into repository?
Thanks
kavi

Hi kavitha,
If your adding a new column to the physical layer or BMM layer the process is same as 10g.
Steps:-
1) Right click table where you want to add the column.
2)Select new object >>physical column/BMM column
3) Enter your choice labelling and data type,if needed formula.
4) Click ok and you can see the column being added on to the table.
CHeers,
KK

Similar Messages

Add a new column to an "Insert Form" created by HTMLDB Wizard throws Error

Hi,
My table design has changed and I had to add 2 new columns.
The corresponding Insert Form/Report/Update Forms created by the HTMLDB should now reflect the new columns that have been added.
In report and update forms I did not have a problem but in the Insert form, under Edit Page Process I tried to change the sql and I get the below error
"Encountered the symbol "end-of-file" when expecting one of the following: begin case declare end exception exit for goto if loop mod null pragma raise return select update while with "
My Edit Page Process SQL is as below-(Last two columns are the NEW columns i.e CDPL and CDPLCA)
insert into "L2ENTRIES"
("AUTONUML2E",
"ROLLNO",
"AWARDCODE",
"ROLLCLASSCODE",
"SURNAME",
"FORENAME",
"SEX",
"DOB",
"PPSNO",
"M1",
"M2",
"M3",
"M4",
"M5",
"M6",
"M7",
"M8",
"M9",
"M10",
"M11",
"M12",
"M13",
"M14",
"M15",
"M16",
"FEES",
"CNULLS",
"CDUPPPS",
"CROLL",
"CAWARDS",
"CMODULES",
"CHECKCHAR",
"CHECKNO",
"VALIDPPS",
"VALIDPPSUK",
"PPSNOPAD",
"CDPL",
"CDPLCA")
values (
:P3_AUTONUML2E,
:P3_ROLLNO,
:P3_AWARDCODE,
:P3_ROLLCLASSCODE,
:P3_SURNAME,
:P3_FORENAME,
:P3_SEX,
:P3_DOB,
:P3_PPSNO,
:P3_M1,
:P3_M2,
:P3_M3,
:P3_M4,
:P3_M5,
:P3_M6,
:P3_M7,
:P3_M8,
:P3_M9,
:P3_M10,
:P3_M11,
:P3_M12,
:P3_M13,
:P3_M14,
:P3_M15,
:P3_M16,
:P3_FEES,
:P3_CNULLS,
:P3_CDUPPPS,
:P3_CROLL,
:P3_CAWARDS,
:P3_CMODULES,
:P3_CHECKCHAR,
:P3_CHECKNO,
:P3_VALIDPPS,
:P3_VALIDPPSUK,
:P3_PPSNOPAD,
:P3_CDPL,
:P3_CDPLCA)
It will be great if some one can assist me in this matter.
Thanks.

Resolved this by a simple ";" at the end of the insert sql.
I did not think a ";" will be necessary because when you edit the page process a ";" is not visible.

Add a new column for WBS description

Hi all
how to Add a new column for WBS description and derive the value as per the FS
anybody can provide document for this

Hi ,
In Table <b>PRPS</b>, alread you have short description field <b>POST1 and POSTU</b> for the WBS element, apart from that still if you want to include a feild for your own requirement , then create a structure and with the description field of your requirement and append that structure into PRPS table.
Hope This Info Helps YOU.
<i>Reward Points If It Helps YOU.</i>
Regards,
Raghav

Issue to Add one new column in search Page..

I have a JSP file of Service Form of Oracle Install Base . In this on select party Site page when search for any item it shows some result as a column. like address , name, country..
we have to add a new column in that search. means when we search for any Item then with address, Name and country it shows a new column also with that. I have the jsp file of that page "csifLOV.jsp". This is the generic LOV page for any database columns.
Can anybody please help where to add this new column definition.
this is code of "csifLOV.jsp".
<%--
+==========================================================================+
| Copyright (c) 2000 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+==========================================================================+
| FILENAME |
| csifLOV.jsp |
| DESCRIPTION |
| This is the generic LOV page for any database columns |
| NOTES |
| |
| DEPENDENCIES |
| |
| HISTORY |
| 23-Aug-2000 X. Li Created. |
| $Header: csifLOV.jsp 115.30 2004/06/14 21:05:05 anukal ship $
+==========================================================================+
--%>
<%@ include file="jtfincl.jsp" %>
<%@ include file="csifContextIncl.jsp" %>
<%
csiPageContext.setPermissionName("SupPer");
csiPageContext.setJspName("csifLOV.jsp");
csiPageContext.setFormName("LOVForm");
String jspName = csiPageContext.getJspName();
String csiFormName = csiPageContext.getFormName();
String formName = csiFormName;
appName = "CSI";
if (CsifutDebug.LOCAL_DEV_ENV)
Properties param = System.getProperties();
String prop = param.getProperty("JTFDBCFILE",
"E:\\myprojects\\dbcfiles\\crmdev04_SCCSIDV1.dbc");
param.put("JTFDBCFILE", prop);
prop = param.getProperty("service.Logging.common.filename",
"E:\\myprojects\\jtflogs\\ebppFW_log");
param.put("framework.Logging.system.filename", prop);
prop = param.getProperty("service.Logging.common.filename",
"E:\\myprojects\\ebppSys_log");
param.put("framework.Logging.system.filename",prop);
System.setProperties(param);
// this may have to change for other people
// ServletSessionManager.startStandAloneSession(appName,true,
// "csiuser","welcome");
     ServletSessionManager.startRequest(request,response,
appName,true,"csiuser","csiuser","Authenticator.system");
/* Push the logFileName into the cookie for future use */
oracle.apps.jtf.util.SystemCheck.setJTFCookie();
// Set cookies for menu rendering
MenuRenderer.setMenuCookies(request);
//Added HTML tag with language code for accessibility.
String CSI_HTML_LANG_CODE;
CSI_HTML_LANG_CODE = oracle.apps.jtf.util.HtmlUtil.getHtmlLanguageCode();
if (CSI_HTML_LANG_CODE == null)
CSI_HTML_LANG_CODE = "en-US";//Added HTML tag with language code for accessibility.
%>
<HTML lang="<%=CSI_HTML_LANG_CODE%>">
<%@ include file="csifStartReqIncl.jsp" %>
<%@ include file="csifExceptionHandleBegin.jsp" %>
<jsp:useBean id="lovBean" class="oracle.apps.csi.framework.pb.CsifpbLOVBean" scope="page" />
<%
lovBean.init(csiPageContext, request);
lovBean.process();
int pageMode = lovBean.getMode();
if (pageMode == CsifpbBasePageBean.LOVRETURN_MODE) //forward to the caller of the LOV
     if (CsifutDebug.DEBUG)
CsifutDebug.addMessage("forward URL=" + lovBean.getForwardToURL());
csiPageContext.setForwardToJSP(lovBean.getForwardToURL());
%>
<%@include file="csifForwardIncl.jsp" %>
<%
else
CsifcmException error = lovBean.getException();
String callerName = lovBean.getJspCallerName();
String labelSelect=null;
String labelEnterPartial=null;
String labelSearch=null;
String labelTitle=null;
int origAppID = csiPageContext.getPageAppId();
String origAppName = csiPageContext.getPageAppName();
csiPageContext.setPageAppId(542);
csiPageContext.setPageAppName("CSI");
Hashtable allLovPrompts = CsifutRegion.getPrompts(csiPageContext, "CSI_FRAMEWORK_LOV");
csiPageContext.setPageAppId(origAppID);
csiPageContext.setPageAppName(origAppName);
if (allLovPrompts != null)
labelSelect = (String)allLovPrompts.get("CSI_SELECT");
labelEnterPartial = (String)allLovPrompts.get("CSI_ENTER_PARTIAL");
labelSearch = (String)allLovPrompts.get("CSI_SEARCH");
labelTitle = (String)allLovPrompts.get("CSI_LOV_TITLE");
else
allLovPrompts = new Hashtable();
String cancelPrm = (String)allLovPrompts.get("CSIF_CANCEL");
%>
<head>
<title><%=labelTitle%></title>
<script language="JavaScript">
function newSearch()
document.<%=csiFormName%>.<%=CsifpbBasePageBean.PAGE_MODE_PARAM%>.value = '<%=CsifpbBasePageBean.QUERY_MODE%>';
document.<%=csiFormName%>.submit();
function returnToCaller()
// alert("Return to " + "<%=callerName%>" )
document.<%=formName%>.action = "<%=callerName%>";
document.<%=formName%>.submit();
function <%=lovBean.LOV_CANCEL_FUNC%>()
var LOVForm = document.forms['<%=csiFormName%>'];
var LOVFieldName = '<%=lovBean.getLOVFieldName()%>';
var LOVOrigValFieldName = LOVFieldName + '<%=lovBean.LOV_ORIG_VAL_FIELD%>';
LOVForm.elements[LOVFieldName].value = LOVForm.elements[LOVOrigValFieldName].value;
LOVForm.elements['<%=CsifpbBasePageBean.PAGE_MODE_PARAM%>'].value = '<%=CsifpbBasePageBean.LOVRETURN_MODE%>';
LOVForm.elements['<%=CsifpbBasePageBean.MODE_ACTION_PARAM%>'].value = '<%=CsifpbBasePageBean.ACTION_CANCELLED%>';
LOVForm.action = '<%=lovBean.getJspCallerName()%>';
LOVForm.submit();
function onPageLoad()
document.<%=csiFormName%>.<%=lovBean.getLOVFieldName()%>.focus();
</script>
<%=lovBean.renderLovReturnJS()%>
<%@ include file="jtfscss.jsp" %>
</head>
<%@ include file="csifBodyBeginIncl.jsp" %>
<%
//if (!CsifutDebug.LOCAL_DEV_ENV)
if (CsifutTimer.TIME)
CsifutTimer.start(CsifutTimer.JTF_MENU);
%>
<%@ include file="jtfdnbartop.jsp" %>
<table summary="" width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td>
<%
if (CsifutTimer.TIME)
CsifutTimer.stop(CsifutTimer.JTF_MENU);
} // end local_dev_env
%>
</td>
</tr>
<tr>
<td>
<form name="<%=csiPageContext.getFormName()%>" method="post" action="<%=jspName%>">
<table summary="" width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td valign="top">
<table summary="" width="100%">
<tr>
<td> </td>
<td class="pageTitle" colspan="4"><%=labelSelect%> <%=lovBean.getLOVPageTitle()%>
</td>
<td> </td>
</tr>
<%@ include file="csifDisplayException.jsp" %>
<tr>
<td width="5%"> </td>
<td width="22.5%"> </td>
<td width="22.5%"> </td>
<td width="22.5%"> </td>
<td width="22.5%"> </td>
<td width="5%"> </td>
</tr>
<tr>
<td> </td>
<td>
<div nowrap align="right" class="promptReadOnly"><%=labelEnterPartial%></div>
</td>
<td colspan="3">
<input type="text" name="<%=lovBean.getLOVFieldName()%>" id="<%=lovBean.getLOVFieldName()%>"
value="<%=HtmlWriter.preformat(lovBean.getLOVSearchPattern())%>" size="15">
<input type="button" name="SearchButton" id="SearchButton"
value="<%=labelSearch%>" onClick="javascript:newSearch()">
<input type="button" name="CancelButton" id="CancelButton"
value="<%=cancelPrm%>" onClick="javascript:<%=lovBean.LOV_CANCEL_FUNC%>()">
</td>
<td> </td>
</tr>
<tr>
<td> </td>
<td colspan="4">
<hr>
</td>
<td> </td>
</tr>
<tr>
<td> </td>
<td class="prompt" colspan="4">

<%
if (lovBean.getMode() != CsifpbBasePageBean.LOVRETURN_MODE)
out.print(lovBean.renderLOVValuesTable(labelSelect));
%>

</td>
<td> </td>
</tr>
<tr>
<td> </td>
<td colspan="4">
<input type="button" name="CancelButton" value="<%=cancelPrm%>"
onClick="javascript:<%=lovBean.LOV_CANCEL_FUNC%>()">
</td>
<td> </td>
</tr>
</table>

          </td>
     </tr>
     </table>

<input type="hidden" name="<%=CsifpbLOVBean.LOV_VALUE_SEL_PARAM%>" >
<%
if(csiPageContext.isAccessible())
%>
<label for="<%=lovBean.getLOVFieldName()%>" class='hidelabel'><%=labelEnterPartial%></label>

<%
%>
<%@ include file="csifHiddenFieldsIncl.jsp" %>
</form>
<%@ include file="csifBodyEndIncl.jsp" %>
</HTML>
<%
} // end of if (pageMode == CsifpbBasePageBean.LOVRETURN_MODE ) .. else {
%>
<%@ include file="csifExceptionHandleEnd.jsp" %>
<%@ include file="csifEndReqIncl.jsp" %> 
Thanks,

If you are copying the 12KST1C to Z12KST1C and executing the s_alr_8701333 report, you will not see the new column added to Z12KST1C
With the new Form Z12KST1C, create a new Report Z12KST1C and assign a new TCODE. Also you have to select all rows and column of form Z12KST1C
TCODE CJE5
Select the form Z12KST1C
Extras--Drildown display --Select Rows and columns
Select the all colhmns by F9
Hope this helps.
Edited by: psconsultant on May 20, 2011 8:42 AM

How to add a new column to a existing table and add data to this column?

I have a table with about 10 millions row and I want to add a new column to this table, then fill this new column with prepared data.
How to do it ?
Thank you

Can I use insert statement to add the data to new-added column?No.
07:19:37 oracle >create table test (x number);
Table created.
Elapsed: 00:00:03.05
07:19:53 oracle >
07:19:53 oracle >
07:19:53 oracle >insert into test values (1);
1 row created.
Elapsed: 00:00:00.00
07:20:01 oracle >insert into test values (2);
1 row created.
Elapsed: 00:00:00.00
07:20:10 oracle >insert into test values (3);
1 row created.
Elapsed: 00:00:00.00
07:20:12 oracle >
07:20:13 oracle >commit;
Commit complete.
Elapsed: 00:00:00.00
07:20:14 oracle >
07:20:19 oracle >select * from test;
         X
         1
         2
         3
Elapsed: 00:00:00.00
07:20:22 oracle >
07:20:36 oracle >alter table test add (y number);
Table altered.
Elapsed: 00:00:00.05
07:20:41 oracle >
07:20:41 oracle >
07:20:41 oracle >
07:20:41 oracle >select * from test;
         X          Y
         1
         2
         3
Elapsed: 00:00:00.00
07:20:43 oracle >
07:20:44 oracle >
07:20:44 oracle >update test set y=1;
3 rows updated.
Elapsed: 00:00:00.02
07:20:52 oracle >commit;
Commit complete.
Elapsed: 00:00:00.00
07:20:56 oracle >select * from test;
         X          Y
         1          1
         2          1
         3          1
Elapsed: 00:00:00.00
07:20:58 oracle >Anand

Need to add 2 new columns to the existing table control of C223 transaction

Hi ABAP Gurus,
I have to do a screen enhancement for transaction C223.
Below is the requirement:
need to add 2 new columns to the existing table control of C223 transaction.
there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
i have created an append structure for the 2 fields to the standard table MKAL.
Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
please sugest...
Thanks & Regards

Hi Santosh,
Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
IM_MKAL     Importing     Type     MKAL                                                                                Production Version
EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change . i dont think this can be used to add two new coloumns to C223 table control.
I am not sure thats why seeking your help/valuable sugestion on this.
Please provide your sugestion on this , so that i can come to conclusion on this issue.
Thanks & Regards
Siddhartha Mishra

How To Add a new column for ZPR0 price in open sales order report ??

HI,
my requirement is To Add a new column for ZPR0 price in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

k

To Add a new column for ZPR0 prce in open sales order report

HI,
my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

HI,
my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

How to add a new column (Project Number) in the action items table under NPD Module?

There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.

There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly

How can I add a new column in compress partition table.

I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
COMPRESS PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
Note :
When I create table with this clause it will allow me to add a column.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.

Hi Fahed,
I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
Topic : When to Use Table Compression
Bug
Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
BUG:<2421054>
Affects: RDBMS (9-A0)
NB: FIXED
Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
Details:
This is an enhancement to allow "ALTER TABLE" to ADD/DROP
columns for tables using the COMPRESS feature.
In 9i errors are reported for ADD/DROP but the text may
be misleading:
eg:
ADD column fails with "ORA-22856: cannot add columns to object tables"
DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
Note that a table which was previously marked as compress which has
now been altered to NOCOMPRESS also signals such errors as the
underlying table could still contain COMPRESS format datablocks.
As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
Best Regards,
Muhammad Waseem Haroon
[email protected]

How can I add a new column to Grid view under Tests tab

I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised.
How can I add a new column to Grid view under Tests tab? Thanks Katherine

I don't think this is possible.
Regards,
Jamie

How can I add a new column to an Attachments Table

How can I add a new column to an Attachments Table??
And I want to remove the usage column also!
Thanks!

I tried to remove the usage column doing this:
OAAttachmentTableBean attachTable = (OAAttachmentTableBean)webBean.findChildRecursive("attachTable");
if (attachTable != null)
attachTable.findChildRecursive("UsageTypeColumn").setRendered(false);
but I'm getting null pointer exception on "UsageTypeColumn"...
:(

How to add a new column as "Warehouse name" in Goods Receipt PO screen?

Hi, Experts
I hope to add a new column or just "display" warehouse name besides Whse column in Goods Receipt PO. How can I do?
Thanks

still not work.
Maybe I did something wrong in UDF definition. Please help to check. Thanks
I named UDF as WhseName, and set it as Alphanumeric and lengh is 20, structure is Regular. And all below check-boxes are not ticked.
And in Goods Receipt PO screen, I marked the UDF as Visible and Active.
Then I ALTSHIFF2 in the UDF fields, and FMS screen displayed.
Then I chose the 3rd one: Search in Existing User-defined value According to Saved Query
T05
Auto Refresh when field changes is not ticked.

Add a new column and the value

I want to add a new column to a table with a single value for all rows of this column. for example, add a new column called 'sid' with the value of 'dbp'. can I use this statement?
alter table ... add sid varchar(8) 'dbp';
or I have to add first then update?

SQL> alter table blah add (sid varchar2(8) default 'dbp');
Table altered.
SQL> select * from blah;
                COL1 SID
                   1 dbp
                   2 dbp
                   3 dbpMessage was edited by: SomeoneElse
(used OP's column name)

Add a new Components into SAP

Needs to Add a new Components into SAP. Is any SAP tool is available to do the same.....

Hi,
For add-on's you can use transaction SAINT.
I am sure this has been answered many times before.
Regards,
Vishnu.

Add a new column into repository

Similar Messages

Maybe you are looking for