Add a new directory with hyphen (-) in the domain name

Dear All,
I'm trying to add a new directory with hyphen (-) in the domain name (default domain *.onmicrosoft.com). As a result I keep getting a validation error: "The domain is not unique". I've tried several
combinations with really awkward words and a hyphen. Such domain names must be unique. I think that the error message is misleading.
Is it a well known behavior? Is it possible to use a hyphen in the domain name?
Thank you for your help,
Artem

Dear Arvind,
Thank you for your effort and time in validating the described behavior.
According to the
Regexp for subdomain question on SO, 'Each subdomain part may contain hyphens (dashes), but may not begin or end with a hyphen'. That been said, the validation error, on your screenshot is appropriate. On the other hand, the validation error
with a hyphen (dash) in the middle is misleading.
It's not a big deal, since people most likely use a custom DNS name anyway.
Kind regards,
Artem

Similar Messages

  • I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

    I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

    Also, if you can't get them to work, what is the error message you are getting?
    Baron Samedi

  • I have changed settings on my email account with my provider, but in order to activate the address they instructed me to delete my account and add a new account with the same email address. Will this delete my all my email history? Any advise please?

    I have an OS X 10.6.8 and have had problems with my mail. I have changed my account settings with my mail provider, but they suggest I now delete my account and add a new account with the same email address. Will this delete my email history? Can anyone please advise?

    I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?

  • How to add a new column (Project Number) in the action items table under NPD Module?

    There are two projects with same name and created by same person in NPD.
    So when it is displayed in "Action Items" table, It looks similar.
    To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
    So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
    Please do the needful.

    There is no out of the box configuration available to add columns to NPD action items.   As always we welcome enhancement requests. 
    Thanks
    Kelly

  • Need to add a new View With ITS Link in it

    Hello All ,
      I am Working on SAP CRM 7.0 in Marketing here in marketing We do have an Account Work Center here in account we have three views Search , Create and Report .I want to add a new view with name "XYZ" in this view i want have Logical links . This logical link is ITS (Transaction Launcher ). Can any one Tell me the Procedure for this . Thanks in Advance
    regards,
    KiranPosanapalli

    Solved by myself

  • I would like to add a new Canon camera profile to the RAW interface

    Hi,  I would like to add a new Canon camera profile to the RAW interface.
    I have recently installed the new camera profile 'Studio Portrait' which i download from here:
    http://www.canon.co.jp/imaging/picturestyle/file/studio-portrait.html
    When I open up a RAW files in Camera RAW, go to 'Camera Calibration', click on the drop down list called
    'Camera Profile'  I only see  'Adobe Standard, Faithful etc etc'.
    My questions are, can i add the same camera profile i put in my camera, into a folder with in photoshop?
    Or is photoshop reading the raw file and only seeing the default camera profiles?
    If I could see the new camera profile listed it would help with work flow.
    Best
    JL-B
    Please help, ive not had a good time waiting on the phone and trying to explain this to a live chat, hours have been wasted. Once i know the answer I can get back to the commission.

    Are you following this
    Apply a camera profile
    To apply a camera profile, select it from the Camera Profile pop-up menu in the Camera Calibration tab of the Camera Raw dialog box. The Adobe Standard profile for a camera is named Adobe Standard. Camera Matching profiles include the prefix Camera in the profile name. The Camera Profile pop-up menu displays only profiles for your camera.
    If the only profile in the Camera Profilemenu is Embedded, it means that you have selected a TIFF or JPEG image. Adobe Standard and Camera Matching profiles work only with raw images.
    Note:  If you have selected a raw file and Adobe Standardand Camera Matching profiles do not appear in the Camera Profilepop-up menu, download the latest Camera Raw update. 

  • A few years ago I bought music from Itunes.  Recently I deactivated all computers in order to add a new computer.  Most of the music I purchased came through, but I am still missing about 30% of it.  How can I download all the music I have purchased from

    A few years ago I bought music from Itunes.  Recently I deactivated all computers in order to add a new computer.  Most of the music I purchased came through, but I am still missing about 30% of it.  How can I download all the music I have purchased from Itunes?

    Might have luck with that here >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store.
    Make sure and use the same Apple ID that was used for the original purchases.

  • How to add a new table or view in the view object

    hello,every one.
    I wanna add a new table or view in the view object's query statement.
    when the table or view not in the where clause,the query statement is working fine.
    If they in the where clause,I got the "java.lang.NullPointerException".
    who can help me
    thank you very much

    thank you for your reply
    I wanna extend the VO
    oracle.apps.pay.selfservice.payslip.US.server.PayPayslipGetPersonDetail
    the original sql is:
    SELECT ppf.person_id,
    FROM per_people_f ppf,
    per_assignments_f paf,
    pay_assignment_actions paa
    where paa.assignment_action_id = :1 AND paf.assignment_id = paa.assignment_id AND SYSDATE BETWEEN paf.effective_start_date AND paf.effective_end_date AND paf.person_id = ppf.person_id
    I wanna extend:
    SELECT ppf.person_id, pay_v.element_name,pay_v.assignment_action_id
    FROM per_people_f ppf,
    per_assignments_f paf,
    pay_assignment_actions paa,
    pay_run_results_v pay_v
    where paa.assignment_action_id = :1 AND paf.assignment_id = paa.assignment_id AND SYSDATE BETWEEN paf.effective_start_date AND paf.effective_end_date AND paf.person_id = ppf.person_id
    pay_v.assignment_action_id =paa.assignment_action_id
    if the pay.v in the where clause. I will got the exception. whereas,it's works fine.

  • Relative path for Download directory folder.I created a firefox profile and i wanted to use this profile in multiple machines.I wanted to use a relative path for download directory with respect to the profile folder.I need this on Linux machines

    I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
    I need to have a relative path to my download directory with respect to the profile folder.
    Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??

    That is not a practically empty xinitrc - that file only needs one line: exec WM.  Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
    Is slim involved?  Probably.  That is the source of many problems.  But to start narrowing this down, I have 3 suggestions:
    1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
    2) at a tty in runlevel 3 use "xinit" instead of "startx".  Startx is fine most of the time, but it is essentially just a complex wrapper for xinit.  That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult.  So for now just use a vanilla 'xinit'.
    3) remove dbus-launch from your exec line in xinitrc.  This is done by console-kit so it is redundant and potentially problematic.  Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them.  Just make that line "exec openbox-session"
    Edit: adding one more:
    4) temporarily switch out openbox-session for openbox.  I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
    Last edited by Trilby (2012-10-03 17:30:36)

  • The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

    Hi,
    I have created on windows service to fetch sharepoint list ad update the list items.
    when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
    The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
    Code snippet
    SPSite sharepointSite = null;
                SPWeb rootWeb = null;
                try
                    //SPList current = null, previous = null;
                    string colmId = ConfigurationManager.AppSettings[ID_COLM];
                    List<TaskEntity> list = new List<TaskEntity>();
                    sharepointSite = new SPSite(URL);
                    rootWeb = sharepointSite.OpenWeb();
                    SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                    WriteEventLog("current" + current.Items.Count.ToString());
                catch (Exception ex)
                    ExceptionMethod(ex);
                finally
                    sharepointSite = null;
                    rootWeb = null;
    I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

    Hi mallela1,
    I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
    You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
    SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
    So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
    I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
    Regards,
    Nandini

  • I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this.  Can anyone help?

    I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this.  Can anyone help?

        Jennymbell, never fear help is here!
    Have you tried contacting your IT department for assistance? You can visit http://bit.ly/QECbGh for steps on how to enterprise activation.
    Keep me posted if you need further assistance.
    John B
    Follow us on Twitter @VZWSupport

  • HT1386 I cannot find how to keep previous photo albums loaded on Ipad when syncing new ones with iTunes. The old ones are wiped out every single time

    I cannot find how to keep previous photo albums loaded on Ipad when syncing new ones with iTunes. The old ones are wiped out every single time

    If it's not too late, see Recovering your iTunes library from your iPod or iOS device. As long as you have a backup of the device when the device still held your photos you should stand a chance of recovering them using a tool such as iPhone Backup Extractor.
    tt2

  • How do I know if I have new Ipad with retina display the model says MC706B/A

    How do I know if I have new Ipad with retina display the model says MC706B/A

    You have a 3rd generation iPad. And yes it is a Retina model.
    Introduced     March 2012
    Discontinued     October 2012
    Model Identifier     iPad3,1
    Model Number     A1416
    Order Number     MC705LL/A (16 GB Black) MD328LL/A (16 GB White) MC706LL/A (32 GB Black) MD329LL/A (32 GB White) MC707LL/A (64 GB Black) MD330LL/A (64 GB White)

  • What Is The Domain Name System for Active Directory on My Computer a Mac OS X

    When I try to bind my mac to an active directory domain I get the error message (“An invalid Domain and Forest combination was specified.  You should enter a fully qualified DNS name for the domain and forest”). I have tried so many things,nothing works
    Any suggestions?

    In general, the domain name you use must be correctly looked up (both backward AND forward) by the Domain Name Server you are using or using Active Directory or Open Directory will not work properly.
    In general, the first-listed DNS Address for each workstation must be one that contains the Active Directory or Open Directory names.
    You can use Network Utility "Lookup" function to test whether the names and the IP Addresses are looked up correctly. Both symbolic (e.g., mydomain.com) and numeric (e.g., 192.168.2.22) addresses of the Active directory server MUST lookup to the other.
    In MacOS X Server installations with private, non-Internet-visible Domain names, this problem can be solved by providing a local DNS Server, and populating the DNS Server with the Active Directory or Open Directory names and IP Addresses set for forward and reverse lookup.
    If the above is gibberish to you, you will need to contact your Active Directory Administrator for guidance.

  • I cannot open files in excel with error message "The file name or path contains invalid characters

    I cannot open files in excel with error message "The file name or path contains invalid characters

    Found the solution. The hardrive name was changed to "/" which is not a recognised file path character. So I changed the name to "Mac" then I was able to already open all files in excel and word

Maybe you are looking for