Add a new line

I just made a new account for Verizon wireless and I am wanting to add the iphone to my plan, but it says my account is in hotline status. What does this mean?

Hi mzahn78,
As indicated by MarcusI (thanks) a hotline note on your account indicates some type of service suspension. I trust that you have contacted our customer service department at 1-800-922-0204 and this issue has been resolved by now. This is something we would need to review personally by phone. If you still need assistance please sent me a PM including an alternate call back number to call you and assist you further.
Please keep in mind that this is a peer to peer forum and while our Social Media Team monitors the activity on these forums, we offer more efficient ways to resolve hotline/suspension issues such as the one outlined on your post.
You can contact us on Twitter @VZWSupport Monday to Friday 7am - 10pm and Saturday 7am - 4pm CST.
You can also call us at 1-800-922-0204 for immediate assistance from 6am to 11pm CST any day of the week including Sunday. Please have your phone fully charged and available for troubleshooting when you call us.

Similar Messages

How to add a new line item to a Purchase Requisition number

Hello All,
Can anyone please provide me with some FM or BAPI to add a new line item to an existing Purchase Requisition number.
Can it be done using BAPI_REQUISITION_CHANGE; if yes, then how do I pass the parameters into the BAPI tables..?
Useful pointers would be appreciated...!!
Thanks & Regards,
Tarun Gambhir

@Gautham,
Thanks for the quick reply.
I want to update the table EBAN, so should I use the parameter table XEBAN to put in the new line item and then execute..
Also to fill up this table I need to pass certain value, so can I use BAPI_REQUISITON_GETDETAIL and pass the same details as found from the same BAPI and create a new line item...
Regards,
Tarun Gambhir

How do I add a new line to an already open but exhausted PO?

Hello,
I am looking for way(s) I can add a new line to an already open PO, (whose funds are exhausted) to accomodate unplanned expenses related to the same project/vendor. Is adding a new line to the original purshase requisition the right way to go?
Thank you
Fatima
Edited by: Fatima Imraan on Jul 4, 2008 8:05 PM

Hi Fatima,
For unplanned expenses we actually do not need additional line item.
In case the invoice from vendor shows other expenses then in MIRO there is a TAB for Unplanned Expenses and we can put such expenses there. These expenses should be with in the tolerances limits set. Now if the expenses cross the limit, depending on the settings you have made, the invoice is posted but blocked for payment. Then some one in the approval list should approve the same and the payment can be made.
This whole process also gets recorded as PO history and hence is very well documented as well
Normally once a PO is signed it is binding on both parties. So as a Business Process we should not try to add a line item when the PO is exsausted.
In such case i think it would be a good idea to either create a new PO.
Some times companies aslo use OPEN PO if it is a year round activity.
Hope my explanation is useful. assign points if yes.
Thanks
Anand

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

Add a new line at the begining of a string in a Xquery ALSB3.0

Has anyone figured out how to Add a new line at the begining of a string in a Xquery in ALSB3.0?
Thanks for your Help.

I believe this is related to BI Publisher. Any comments would be greatly appreciated.
Thanks,
Sinan

How to add a new Line in Labeltext of Ribbon button added in runtime ?

HI , i'm adding a new buuton ribbon to an existing Tab (Edit Tab) , i use the AliasTemplate "o1" , and this is my button :
The text "Mettre a jour la fiche a partir de la concept Note " is very long i want to add a new line after "a partir" so i will have two lines , this is what i tried but it dosent worked :
private string btnUpdateForm = @"<Button
Id=""Ribbon.Tab.GRP.ButtonUpdate""
Sequence=""17""
Image32by32=""/_layouts/images/Aidimpact.RibbonWorkflkow/export-icon.png""
Description=""""
Command=""Ribbon.Tab.GRP.ButtonUpdate.Click""
LabelText=""ValValUpdateLabel1
ValValUpdateLabel2""
TemplateAlias=""o1""/>";
private void AddBtnUpdate()
// Get the current instance of the ribbon on the page.
Microsoft.Web.CommandUI.Ribbon ribbon = SPRibbon.GetCurrent(this.Page);
// Prepare an XmlDocument object used to load the ribbon extensions.
XmlDocument ribbonExtensions = new XmlDocument();
// Load the contextual tab XML and register the ribbon extension.
int intLCID = System.Threading.Thread.CurrentThread.CurrentUICulture.LCID;
if (intLCID == 1036)
btnUpdateForm = btnUpdateForm.Replace("ValValUpdateLabel1", "Mettre à jour la fiche à partir");
btnUpdateForm = btnUpdateForm.Replace("ValValUpdateLabel2", "\n \r\n de la Concept Note");
else
btnUpdateForm = btnUpdateForm.Replace("ValValUpdateLabel", "Update the form from Concept Note");
ribbonExtensions.LoadXml(this.btnUpdateForm);
ribbon.RegisterDataExtension(ribbonExtensions.FirstChild, "Ribbon.ListForm.Edit.Actions.Controls._children");
Thanks for advance

Hi,
i replicated issue , and \n is not affective. So i guess what option you can try is to keep text small and use Alt to show full text.
Regards,
Milan Chauhan
LinkedIn
|
Twitter | Blog
| Email

How to add a new line in SMS(Line Break).

Hi All,
I need to send SMS from PL\SQL Procedure
The problem i have been facing is that the string being passed in as sms content is not parsing a newline character.
It shows all content in one line.
I need to break them in several lines.
Give me a direction how to add a new line in SMS.
Regards,
Raj.

Hi,
Sure, Here it is
CREATE OR REPLACE PROCEDURE APPS.AUTO_SMS_RTV_REPORT
IS
sender          VARCHAR2(1000);
recipient     VARCHAR2(1000);
message          VARCHAR2(4000);
sub          VARCHAR2(1000)     := 'HELLO';
dt1          varchar2(1000)     := to_char(sysdate,'DD-MON-YY');
mailhost     VARCHAR2(30) := '10.7.7.xxx';
mail_conn     UTL_SMTP.CONNECTION;
v_crlf VARCHAR2(2) := CHR(13)||CHR(10);
CURSOR cur_Rejection_Records IS
               SELECT DISTINCT
                    rt.VENDOR_SITE_ID               ,
                    pvs.email_address     VENDOR_MAIL_ID     ,
                    pvs.PHONE          vendor_contact_no ,
                    hre.EMAIL_ADDRESS     Employee_mail_id ,
                    hre.FULL_NAME
               FROM apps.rcv_transactions      rt,
                    apps.po_vendors           pv,
                    apps.po_vendor_sites_all     pvs,
                    apps.mtl_transaction_reasons mtr,
                    apps.fnd_user          fu,
                    apps.hr_employees          hre
               WHERE transaction_type = 'RETURN TO VENDOR'
               --AND        TRUNC(rt.transaction_date) = TRUNC(SYSDATE)
               AND     rt.vendor_id          = pv.vendor_id
               AND     rt.vendor_site_id     = pvs.vendor_site_id
               AND     rt.REASON_ID          = mtr.REASON_ID(+)
               AND fu.user_id          = rt.last_updated_by
               AND hre.EMPLOYEE_ID     = fu.EMPLOYEE_ID
               AND TRANSACTION_ID IN (
                              11902189,
                              11902253,
                              11902148)
BEGIN
     FOR rec_Rejection_Records IN cur_Rejection_Records
     LOOP
     Begin
          sender     := '<[email protected]>';
          recipient     := rec_Rejection_Records.vendor_contact_no || '@aaaa.com';
          mail_conn := utl_smtp.open_connection(mailhost, 8025);
          utl_smtp.helo(mail_conn, mailhost);
          utl_smtp.mail(mail_conn, sender);
          utl_smtp.rcpt(mail_conn, recipient);
          utl_smtp.DATA(     mail_conn,
                              'Date: ' || TO_CHAR(SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss') || utl_tcp.crlf ||
                              'From: ' || sender     || utl_tcp.crlf ||
                              'Subject: '|| sub     || utl_tcp.crlf ||
                              'To: ' || recipient || utl_tcp.crlf ||
                              utl_tcp.crlf ||
                              'Dear Supplier,'||CHR(10)|| utl_tcp.crlf ||'\\\0x0A'|| -- HERE I NEED LINE BREAK
                              'Please.'|| utl_tcp.crlf
          DBMS_OUTPUT.PUT_LINE('Yep !!! SMS Sent Sucessfully :) ');
          utl_smtp.quit(mail_conn);
     EXCEPTION
          WHEN UTL_SMTP.PERMANENT_ERROR THEN
                    dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
          WHEN OTHERS THEN
                    dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
     END;
     END LOOP;
END AUTO_SMS_RTV_REPORT;
/

Add a new line using an old verizon phone

want to add a new line to existing contract using a previously purchased Verizon smartphone.

currently have a newly purchased verizon smart phone that was given to me and i want to know if it is possible to activate this phone with a new line uner my pre exsisting contract so i dont have to buy another phone would just have to pay activation fee and upgrade my plan as well

How to add a new line item when i click on UPDATE in orderpage B2B webshop?

Hi Gurus,
I need to add a new line item based on some condition when i click on update in the order page in b2b web shop. Is there any way to pass some parameters to the BADI crm_isa_basket_items and create a new line item when i update? If so can you please tell the parameters that i need to pass to the badi.
Any help will be highly appreciated!!!!!
Thanks in advance,
Lakshman.

You can put condition when you call java script function while clicking on "update" button.
On order.jsp update button call "submit_refresh()" java script function. You can check your condition over here.
You can find this function in "orderTools.js" file.
And when you enter item in last line on order page and click on the update button it will automatically add new empty lines on your order page as per your selected new line items from drop down box.
Or may be you can call your custome action class when you click on update to check particular condition.
I hope it will help you.
Thanks and Regards.
eCommerce Developer

Long shot... Can an entry in Calendar add a new line in Numbers?

I am a photographer. I am setting up a very simple simple Job tracking spreadsheet. Column A is Job number, column B is Client, column C is Date, etc... One line per job type of thing.
When I get a job I am often not at the computer so I enter it on my iPhone in the Calendar app. Is there a way I can add some sort of flag in that entry which will then open my spreadsheet and add a new line with a new sequential job number and the Client and Date?
I realize that is probably asking for a lot but I thought I would at least ask, just in case...
Thank you for any help!
Bo

This is a proof-of-concept Applescript that logs events from Calendar into a Numbers spreadsheet. It expects a spreadsheet to be open, it doesn't put new events at the bottom of the table or add new rows if needed, it doesn't move the event from the Unlogged calendar to the Logged calendar. It doesn't do any error-checking (it would fail if you didn't have a calendar called "Unlogged Jobs"). But I think it has potential.
tell application "Calendar"
          set event_count to (count events of calendar "Unlogged Jobs")
          repeat with x from 1 to event_count
                    tell event x of calendar "Unlogged Jobs"
                              set {client, sdate, place} to {summary, start date, location}
                    end tell
                    tell application "Numbers"
                              tell document 1
                                        tell sheet 1
                                                  tell table 1
                                                            tell column 2 to set value of cell (x + 1) to sdate
                                                            tell column 3 to set value of cell (x + 1) to client
                                                            tell column 4 to set value of cell (x + 1) to place
                                                  end tell
                                        end tell
                              end tell
                    end tell
          end repeat

Add a New line to ALV Grid control

Hi experts,
   My requirement is after filling ALV grid, user will select a + button from the menu, I need to add a new line next to the selected ALV line (Like in a table control). Does it posible to do this? If can any body tell me how I can do this.
Regards,
Venkat.

Hi Venkat...
I have tried this and it worked...
Just copy paste this program...
Note : U will have to create a new PF status for this... and give the Function code as given in my program... then only it will work...
*& Report Z_ALV_TRAINING_LIST_EVENTS
REPORT Z_ALV_TRAINING_LIST_EVENTS.
Tables *************
TABLES : T001.
Type Pools Used **********
TYPE-POOLS : SLIS.
Types Declared **********
Internal Tables Declare ************
DATA : IT_company    TYPE STANDARD TABLE OF T001 INITIAL SIZE 0 WITH HEADER LINE,
       IT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
       it_alv_event type SLIS_T_EVENT.
Select Data ***********
start-of-selection.
SELECT * FROM T001 INTO TABLE IT_company.
Make Field Catalog ******
PERFORM MAKE_FIELD_CATALOG.
get evente *****
perform get_alv_events.
Display ALV *********
end-of-selection.
PERFORM DISPLAY_ALV_LIST.
*&      Form make_field_catalog
      text
--> p1        text
<-- p2        text
FORM MAKE_FIELD_CATALOG .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME               =
I_INTERNAL_TABNAME           =
   I_STRUCTURE_NAME             = 'T001'
I_CLIENT_NEVER_DISPLAY       = 'X'
I_INCLNAME                   =
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
CHANGING
    CT_FIELDCAT                  = it_field_cat
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " make_field_catalog
*&      Form display_alv_list
      text
--> p1        text
<-- p2        text
FORM DISPLAY_ALV_LIST .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
   I_CALLBACK_PROGRAM             = sy-repid
    I_CALLBACK_PF_STATUS_SET       = 'SET_MY_PF_STATUS'
I_CALLBACK_USER_COMMAND        = ' '
I_STRUCTURE_NAME               =
IS_LAYOUT                      = fl_layout
   IT_FIELDCAT                    = it_field_cat[]
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
   I_SAVE                         = 'X'
IS_VARIANT                     = '/TEST_VV'
    IT_EVENTS                      = it_alv_event
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = it_company
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_alv_list
*&      Form get_alv_events
      text
--> p1        text
<-- p2        text
FORM get_alv_events .
data : wa type slis_alv_event.
wa-name = 'USER_COMMAND'.
wa-form = 'SUB_MY_PF_EVENT'.
append wa to it_alv_event.
ENDFORM.                    " get_alv_events
*&      Form sub_my_pf_event
      text
--> p1        text
<-- p2        text
FORM sub_my_pf_event using p_comm type sy-ucomm p_sEL_FIELD TYPE SLIS_SELFIELD.
data : wa type t001.
case p_comm.
    when 'BACK'.
      leave program.
    when 'EXIT'.
      leave program.
    when 'NEW'.
      clear wa.
      insert wa into it_company[] index p_sel_field-tabindex.
      PERFORM DISPLAY_ALV_LIST.
endcase.
ENDFORM.                    " sub_my_pf_event
*&      Form SET_MY_PF_STATUS
      text
--> p1        text
<-- p2        text
FORM SET_MY_PF_STATUS USING    p_rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZALV_STATUS'.
ENDFORM.                    " SET_MY_PF_STATUS
Plz award points if this was helpful....

How do add a new line in the JavaScript Editor?

I have a script like this:
var n = this.getField("score").value;
if (n >= 0 && n < 5) {
event.value = "The WP 100% Bond\nThe WP 10% Stock / 90% Bond\nThe WP 20% Stock / 80% Bond";
I want to output that line like...
The WP 100% Bond
The WP 10% Stock / 90% Bond
The WP 20% Stock / 80% Bond
But it's not honoring the \n for a new line. How in the heck do you add a new line??? I've tried \r, \r\n, \n\n. All it does is add a character space, and looks like this...
The WP 100% Bond The WP 10% Stock / 90% Bond The WP 20% Stock / 80% Bond

You can use \n like you did to indicate a new line, or \r (carriage return). If it's not working, be sure to set the field to multiline on the Options tab of the field properties dialog.

Add a new line to get Iphone 4s instead of ETF?

Could I add a line to our family share plan to get the Iphone 4S, and after activation on the same day switch the Iphone to my current phone line # on the same plan, and then add an old non data phone to the new line added to buy the iphone? That way I get the Iphone at the 2 year price and not have to pay a early termination fee, plus I get to keep my current phone # and unlimited data? Will this work? Help please!

I would be buying this from a verizon store. I went tonight to buy the iphone 4s and I was told I couldn't because last May I decided to pay the difference for a new phone instead of getting the same phone they had replaced many times and I kept having issues with having poor reception quality. So I bought my current Droid X for $199.99 plus $20 more for the early upgrade fee, so I got no discount. I am told today that I used my upgrade in May so I have to wait until January of 2012 to upgrade to Iphone 4S or any other phone unless I pay retail price of $649.99. So my husband and I decided to see if it would be worth just adding a new line and switching the phones around. Do you see me getting any grief for doing this?

How to add a new line in pe51?

Hi Team,
I want to add anew field in pe51 form editor.
for that i want to add anew line in pe51 form
i went to pe51 tcode and selected background raidobutton.
but from ther i dont know how to add a line at the required position.
So please reply me on this as soon as possible.
Thanks & Regards,
Kranti.

Hi Kranti,
The reason, why you are not able to insert a new line in background could be that the maximum line size defined in attributes is already utilized. Thats why F7 doesn't work.
1- From main screen of PE51, select your pay slip, click on attributes and than click on change button.
2- Increase value in lines field and save changes.
3- Go to background and try to insert new line with F7 keyboard key.
I hope this is what you are looking for.
Regards,
Waqas Rashid

Cannot update phone/add a new line after updating plan

I updated my data plan to a shared family plan and now would like to upgrade one of the phones and also add a new phone but can't - it says 'order still pending".How long do I need to wait?

If you are trying to do this all online, it won't happen. The new shared plan probably won't go into effect until your next billing cycle. And the Verizon website is notorious for only being able to do one thing at a time. To upgrade the plan, add a line, and get new phones all at once is more than it can handle.
So, what you need to do is call Customer Service (800-922-0204) and complete the changes with a rep on the phone, or go into a store to do the transactions. Or wait for one change to take effect, then make another - but it could take a long time doing it that way.

REUSE_ALV_GRID_DISPLAY == How to add a new line?

Hello SDN community,
I'm using the "REUSE_ALV_GRID_DISPLAY" function with "i_save = 'X'". How can I solve the following problem: I want to insert a new line into the ALV and after a click on the SAVE Button, the internal table should have this new line too?
Best regards,
Marius Klaus
[click for an example picture|http://pic-hoster.net/upload/0a8b8c5c7a38434f4e0010ceb7f6fbe7.jpg]
Edited by: Marius Klaus on Nov 30, 2009 4:00 PM

on the click of add button(for adding an line in grid_display) write the following code.
t_user_input is the table to be displayed in ALV_GRID.
DATA : ob_ref_grid TYPE REF TO cl_gui_alv_grid.
READ TABLE t_user_input INTO e_user_input INDEX 1 .
          MODIFY e_user_input(as per user's requirement)
          APPEND e_user_input TO t_user_input.
      CALL METHOD ob_ref_grid->check_changed_data .
      CALL METHOD ob_ref_grid->refresh_table_display.
Regards,
Shekhar

Add a new line

Similar Messages

Maybe you are looking for