Add a new personalized softkey to my phone

I want to add a new softkey to my phone to have access to all my spedd dials. Someone say me that it is possible. I want to do that to my Cisco IP phone 7912 beacause I only have direct access to 4 of my speed dials.
Thanks, Carlos.

you cannot create a softKey to add more speedDials.
a speed dial is a physical line on the phone associated with a DN button.
you may be talking about your FastDials and wanting a single softKey to get to those...is this what you want?
see the following link for creating softKey templates:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803ed6f5.html

Similar Messages

I need to add a new 2811 MGCP

I have a clouster 4.1.2 and need to add a new office (external)which has a independient numeric plan.
Some body can refresh me the rigth flow to configurate, becouse I was think:
1.- Add Gateway to CCM clouster
2.- Add a new translation patern to offices phones
3.- Route patterns to external office
4.- Route patterns to international and long distance calls
5.- Superviability
bud I don't know if I need a route group, a route list or create a zone
Thank

IF you point a route pattern to the gateway directly, you cannot add that gateway into a route group. You will have to
a. either delete all route patterns that are pointed to the gateway in question
b. create route group, add gateway to route group
c. add route group to route list
d. add route patterns and point them to the route list.
OR
a. add a dummy h323 gateway.
b. repoint all route patterns to this h323 gateway. (temporary)
c. add a route group and add the mgcp gateway in question to the route group, and add route group to a route list.
d. repoint all route patterns to the route list
e. delete h323 gateway.
On the issue with calls not going out, I would check
a. sh isdn status
b. see if gateway is registered to callmanager
c. sh ccm-manager
d. debug isdn q931 - to see whats the cause code for calls not going out.
e. if route patterns have any partitions configured, then that partition need to be accessible in the CSS configured on the phone.
HTH
Sankar
PS: please remember to rate posts!

When I add a new song to an existing playlist, will it automatically sync to my iPod once connected to my computer?

When I add a song to an existing playlist on iTunes, will it sync to my iPod once connected?
I'd rather not have to remember each specific playlist I add songs too to sync it to my iPod.
I do have automatic sync set up, starting today because I got tired of constantly manually adding music.
ALSO, if I deleted songs in iTunes, will it delete them in my iPod as well once connected to my computer?

PsychedelicWonders wrote:
When I add a new contact to my actual phone, will it sync, back up and make a file for the new contact in outlook?
iPhoneUser guide, page 8:
"Contacts and calendars are synced
both ways between your computer and iPhone. New entries or changes you make
on iPhone are synced to your computer, and vice versa."
So basically, do they keep each other updated automatically?
Yes, your data will be updated every time you sync.
Or do I have to enable something?
iPhone User guide, page 9:
"The Info pane lets you configure the sync settings for your contacts, calendars, email
accounts, and web browser"
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

Why can't I add a new contact from the phone app?

I am trying to add a new contact from a call I got this am. I get to the contact screen but I can add anything - ie no keyboard pops up to type anything in. I also can not use the copy function to copy the number into the contacts app.
This is TERRIBLE!! As a person who is on the phone for a living, I need to capture numbers as I get those calls!!
Has anyone found a solution to this problem with IOS 7?
I will probably go to the genius bar this afternoon....
Thanks

Try resetting your phone:
Hold the home button + the lock button for about 10-12 seconds until the Apple logo appears. You will not lose any data or current settings.

Do I have to add a new contact for each new phone number?

I just got my phone and I'm adding in my contact manually. I don't see multiple spots for multiple phone numbers for one person? Do I have add a new contact for each phone number a person has? (I.e. One for their home number, one for their work number, one for their cell number).
Thanks!

No.
There is no reason to have a default number of phone number entries that may not all be used and the same for email addresses.
When manually entering contact info, after entering the first number for a contact, a new phone number entry is made available directly below.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How do i add a new phone to my itunes account and load my backup

how do i add a new phone to my itunes account and load my backup

The bottom section (iTunes part) gives instructions. The first few panels discuss backing up the old phone but then it gets into restoring to the new phone: http://support.apple.com/kb/HT2109

How do I add a new number to my iMessage? I have tried resting my phone signing in and out of apple ID and turned it on an off what do it do?

How do I add a new number to my iMessage? I have tried resting my phone signing in and out of apple ID and turned it on an off what do it do?

It won't allow me to do it, only says I can add an email I've search all over here for ways to do it and not one way has worked.

Can I add a new phone user to my itunes account without overriding my phone data?, can I add a new phone user to my itunes account without overriding my phone data?

Can I add a new phone user to my itunes account without overriding my phone data?

Read this
http://support.apple.com/kb/HT1495

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

The 4G/iOS 6 does not have an Activation Lock. That started with iOS 7.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

Cannot update phone/add a new line after updating plan

I updated my data plan to a shared family plan and now would like to upgrade one of the phones and also add a new phone but can't - it says 'order still pending".How long do I need to wait?

If you are trying to do this all online, it won't happen. The new shared plan probably won't go into effect until your next billing cycle. And the Verizon website is notorious for only being able to do one thing at a time. To upgrade the plan, add a line, and get new phones all at once is more than it can handle.
So, what you need to do is call Customer Service (800-922-0204) and complete the changes with a rep on the phone, or go into a store to do the transactions. Or wait for one change to take effect, then make another - but it could take a long time doing it that way.

Cannot add a new reminider. I am using and Iphone5, version 6.0.2. When I press the reminder app on the phone there is no "+" sign to input a reminder. When I use Siri it says "sorry I wasnt able to create reminder".

Cannot add a new reminider. I am using and Iphone5, version 6.0.2. When I press the reminder app on the phone there is no "+" sign to input a reminder. When I use Siri it says "sorry I wasnt able to create reminder".

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Add a new line using an old verizon phone

want to add a new line to existing contract using a previously purchased Verizon smartphone.

currently have a newly purchased verizon smart phone that was given to me and i want to know if it is possible to activate this phone with a new line uner my pre exsisting contract so i dont have to buy another phone would just have to pay activation fee and upgrade my plan as well

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

Jennymbell, never fear help is here!
Have you tried contacting your IT department for assistance? You can visit http://bit.ly/QECbGh for steps on how to enterprise activation.
Keep me posted if you need further assistance.
John B
Follow us on Twitter @VZWSupport

When i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

when i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Add a new personalized softkey to my phone

Similar Messages

Maybe you are looking for