Add a new Row in detail form

Hello Everyone ,
I have add row Botton on details form to add row and save button to save data .
When I clicking to add row its creating new row but as i am saving it it says 1 row inserted but when i am accessing the same data the new added row was not showing there .
I am not getting any error .I have master detail form
Thanks in advance

I'm having the same issue.
However, I've noticed that the ROW in question is getting added to the database, but it's not populating the KEY column that links the sub table.
MASTER TABLE
MK_ID number
MK NAME varchar
SUB TABLE
SK_ID number
MK_ID number (should link to above)
SK_NAME varchar
I get the message that the row has been added in APEX, but then nothing shows on the web form.
Doing a quick query of the Sub Table, I can see the row (minus the Master Table key).
MASTER TABLE
MK_ID = 1
MK_NAME = KEN
SUB TABEL
SK_ID = 3
MK_ID is NULL !!
SK_NAME CHILD1
It "ALMOST" works.
I used the wizard to create this, and did NOT modify anything, so I assume this should be an open bug, and people shouldn't use it.
Cheers!
Edited by: Canucklehead on Nov 23, 2008 4:52 PM

Similar Messages

Add a new row in Detail form in MASTER DETAIL FORM

Hello Everyone,
I need help on the following.I have master detail form .In detail form i have Add Row button which adds a new row and i have save button to save the record .But now if i am adding a row its not adding a new row .It says it process but didn't show the new row .
Can somebody help me on this
thanks in advance

Hello,
How many records do you show in your detaii region and how many are there for that master? Maybe the new row is in the next set of records - or at the 'bottom' of the last set of records?
Did you check if the row is inserted in the database (and just didn't show up for one reason or another)?
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/

How to add a new row in Tabular Form based on a table

Hi
I have tabular form based on a table.
I want the table to have an empty row when there is no data
in the table so that I can enter data directly.
But right now whenever the page is launched, its showing a no data found message and I have to press the 'Add Row' button to enter data.
Can anyone help me out on this?
Thanks

Hi Leo
Your suggestion works fine in the APEX 2.1
But in 3.0.1 it gives this error :
Error in add row internal routine: ORA-01476: divisor is equal to zero
Error Unable to add rows.
I am not sure why this happens.

How to stop insert of new row in tabular form if it's also being deleted

Suppose you have a tabular form, and one of the fields is a not-null column. A user checks a button to "add additional row", which adds a new row to the form, defaulting that not-null column to null. Assume it's a name or something, so there is no reasonable non-null default value that can be entered here to keep it from being null.
Now suppose the user makes a series of changes on the page, but then decides they don't want that row they just added, so they mark it for deletion, then click on "Delete Checked Rows". The not-null column was left blank.
The page is constructed in such a way that the ApplyMRD process runs first, then the ApplyMRU process. (I do this so that the user doesn't lose all their updates if they want to delete a row. I've had a few people complain when they tried to combine both operations, and unexpectedly lost their updates when they hit delete instead of submit.)
What happens? The page errors out because the ApplyMRU process is trying to insert a row with a null value in a not-null column. The ApplyMRD process ran fine, but because the row marked for deletion didn't exist in the database to begin with, it effectively did nothing. But ApplyMRU still tries to add the row, even though it was marked for deletion.
Is there any way to prevent this scenario from happening, without requiring the user to Cancel instead of deleting the blank row, which would cause all other changes on the page to be lost? I'd also like to avoid losing the ApplyMRU process when the user clicks "Delete", since it's more effective to combine operations and this will address the UI complaints I'd received otherwise.
(This is on ApEx 4.0, if it matters.)
Thanks,
Keith

Thinking about this some more, doing the delete and update together may not be an easy thing to accomplish after all.
Consider the above scenario, but the user puts a dummy value like "ignore-me" into the not-null text field, so the error doesn't come up with ApplyMRU is fired. But if ApplyMRD runs before ApplyMRU, it still doesn't do anything because there is no row in the database with the value "ignore-me". Then ApplyMRU runs and it adds that row, even though it was marked for deletion.
So you probably need to always run ApplyMRU before ApplyMRD. But then you wind up inserting a row before you delete it, and that may have unintended side effects, if the user really never wanted to add it in the first place.
Right now, the only workaround I can think of is to:
1) put ApplyMRU before ApplyMRD
2) add a pre-commit validation that checks to see if a row is blank AND checked, and if so, put a dummy value into the not-null field
3) let that row get added and then deleted, and make sure there are no side effects from this (for example, there is an audit table that tracks updates to the base table -- I can add a trigger that does nothing if presented with this dummy value)
Hopefully, though, there is an easier and more "built-in" way to achieve what I'm aiming for.

Trying to automatically add a new row w/o mutating table error...

I'm using Oracle 10g express. I'm trying to automatically add a new row with the same e_ID, (RDD + 6 months) as the updated row when RC is updated. I'm fairly new to Oracle, so I need some help on creating a trigger. If you need more details let me know. Thanks in advance.
create table E
e_id number(6,0) not null,
constraint e_pk primary key(e_id)
create Table ER
e_Id Number(6,0) Not Null,
SC Date,
RDD Date,
RC Date,
Constraint ER_Fk Foreign Key(E_Id) References E(E_Id)
);

mookjais wrote:
I'm using Oracle 10g express. I'm trying to automatically add a new row with the same e_ID, (RDD + 6 months) as the updated row when RC is updated. I'm fairly new to Oracle, so I need some help on creating a trigger. If you need more details let me know. Thanks in advance.
create table E
e_id number(6,0) not null,
constraint e_pk primary key(e_id)
create Table ER
e_Id Number(6,0) Not Null,
SC Date,
RDD Date,
RC Date,
Constraint ER_Fk Foreign Key(E_Id) References E(E_Id)
);Do you mean following(example)?
create trigger after_insert_e
after
insert
on e /*This is table name*/
referencing new as new old as old
for each row
begin
insert into ER(e_Id,SC,rdd,rc)
values(:new.ed_id,sysdate,sysdate,sysdate);
end;

How do I add a new row to an AbstractTableModel?

I'm having an issue with adding new data to a table row. Every row I add contains the same data which is always the last data I grabbed from my database. I'm not sure if my issue has to do with how I set up the data to be passed or the table itself or both... Any help would be appreciated. It seems like the tablemodel is holding the memory spot ArrayList I'm passing. If I have to set up an arraylist of arraylists, to pass how do I do that?
My output is always:
1,4,Laser,10,120,100
1,4,Laser,10,120,100
1,4,Laser,10,120,100
1,4,Laser,10,120,100
Desired output:
1,1,Beam,10,99,100
1,2,Canon,10,120,100
1,3,Missile,10,66,100
1,4,Laser,10,120,100
     * Extract weaponIDs by hullType from weapon database
private void setWeapons(int hullType){
// equpModel is the tableModel
    equipModel.clearTable();
    Weapon tempWeapon = new Weapon();
    ArrayList newData = new ArrayList();
    for (Iterator <Weapon> i = dataBaseManager.weaponList.iterator(); i.hasNext(); ){
        tempWeapon = i.next();
        if (tempWeapon.weaponClass == hullType){
            newData.add(0,1);
            newData.add(1,tempWeapon.weaponID);
            newData.add(2,tempWeapon.weaponName);
            newData.add(3,tempWeapon.weaponCps);
            newData.add(4,tempWeapon.weaponMass);
            newData.add(5,tempWeapon.weaponCost);
            equipModel.insertRow(newData);
}Here is a snipet from the table class
public class GenTableModel extends AbstractTableModel {
private ArrayList data; // Holds the table data
private String[] columnNames; // Holds the column names.
   * Constructor: Initializes the table structure, including number of columns
   * and column headings. Also initializes table data with default values.
   * @param columnscolumns[] array of column titles.
   * @param defaultvdefaultv array of default value objects, for each column.
   * @param rowsrows number of rows initially.
public GenTableModel(String[] columns, Object[] defaultv, int rows) {
    // Initialize number of columns and column headings
    columnNames = new String[ columns.length ];
    for(int i = 0; i < columns.length; i++) {
      columnNames [ i ] = new String(columns [ i ]);
    // Instantiate Data ArrayList, and fill it up with default values
    data = new ArrayList();
    for(int i = 0; i < rows; i++) {
      ArrayList cols = new ArrayList();
      for(int j = 0; j < columns.length; j++) {
        cols.add(defaultv [ j ]);
      data.add(cols);
   * Adds a new row to the table.
   * @param newrowArrayList new row data
public void insertRow(ArrayList newrow) {
    data.add(newrow);
    super.fireTableDataChanged();
   * Clears the table data.
public void clearTable() {
    data = new ArrayList();
    super.fireTableDataChanged();
}

Hi thanks again for responding
Here is the Initialization, including the panel and scrollpane it sits on.
      // Table attempt
        JPanel tablePanel = new JPanel(new BorderLayout());
        tablePanel.setBounds(PANEL_X+2*PANEL_DISTANCE, PANEL_Y, PANEL_WIDTH+300, PANEL_HEIGHT);
        title = BorderFactory.createTitledBorder(blackLine, "Table List");
        tablePanel.setBorder(title);
// This is column tile plus one dummy initilization set.
        String[] columnNames = {"DB", "ID", "Name", "CPS", "Energy", "Mass", "Cost"};
        Object[] data = {new Integer(0),new Integer(0), "Empty", new Integer(0),
                    new Integer(0),new Integer(0),new Integer(0)};
// here is the GenTableModel creation
        equipModel = new GenTableModel(columnNames, data, 1);
        equipmentTable = new JTable(equipModel);
        equipmentTable.setRowSelectionAllowed(true);
        equipmentTable.setFillsViewportHeight(true);
        equipmentTable.setColumnSelectionAllowed(false);
        TableColumn column = null;
        column = equipmentTable.getColumnModel().getColumn(0);
        column.setPreferredWidth(20);
        column = equipmentTable.getColumnModel().getColumn(1);
        column.setPreferredWidth(20);
        JScrollPane scrollPane = new JScrollPane(equipmentTable);
        tablePanel.add(scrollPane);
        add(tablePanel);
    Here is the full code for GenTableModel. It is as you guessed.
public class GenTableModel extends AbstractTableModel {
private ArrayList data; // Holds the table data
private String[] columnNames; // Holds the column names.
public GenTableModel(String[] columns, Object[] defaultv, int rows) {
    // Initialize number of columns and column headings
    columnNames = new String[ columns.length ];
    for(int i = 0; i < columns.length; i++) {
      columnNames [ i ] = new String(columns [ i ]);
    // Instantiate Data ArrayList, and fill it up with default values
    data = new ArrayList();
    for(int i = 0; i < rows; i++) {
      ArrayList cols = new ArrayList();
      for(int j = 0; j < columns.length; j++) {
        cols.add(defaultv [ j ]);
      data.add(cols);
public int getColumnCount() {
    return columnNames.length;
public int getRowCount() {
    return data.size();
public String getColumnName(int col) {
    return columnNames [ col ];
public Object getValueAt(int row, int col) {
    ArrayList colArrayList = (ArrayList) data.get(row);
    return colArrayList.get(col);
public Class getColumnClass(int col) {
    // If value at given cell is null, return default class-String
    return getValueAt(0, col) == null ? String.class
                                      : getValueAt(0, col).getClass();
public void setValueAt(Object obj, int row, int col) {
    ArrayList colArrayList = (ArrayList) data.get(row);
    colArrayList.set(col, obj);
public void insertRow(ArrayList newrow) {
    data.add(newrow);
    super.fireTableDataChanged();
public void deleteRow(int row) {
    data.remove(row);
    super.fireTableDataChanged();
public void deleteAfterSelectedRow(int row) {
    int size = this.getRowCount();
    int n = size - (row + 1);
    for(int i = 1; i <= n; i++) {
      data.remove(row + 1);
    super.fireTableDataChanged();
public ArrayList getRow(int row) {
    return (ArrayList) data.get(row);
public void updateRow(ArrayList updatedRow, int row) {
    data.set(row, updatedRow);
    super.fireTableDataChanged();
public void clearTable() {
    data = new ArrayList();
    super.fireTableDataChanged();
}

Need to add a new row at the end of the table

Experts,
working jdev 11.1.1.3.0
i am adding row programetically, my requirement need to add the row at after last row.
i tried different ways.
Row newLastRow = getPWBBidLaneVO().last();
int lastRowIndex = getPWBBidLaneVO().getRangeIndexOf(newLastRow);
getPWBBidLaneVO().insertRowAtRangeIndex(lastRowIndex - 1,
laneRow);
this is giving --- java.lang.ArrayIndexOutOfBoundsException: 0
and
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html --- its giving index out of bound because vo.getRangeSize() is 25. We set this value at vo for performance improment suggestions.
is there a way to add a new row at the end of the table?

Add this to the view row impl class
       public void insertRow(Row row) {
           //go to the end of Rowset if it has rows
           Row lastRow = this.last();
           if (lastRow !=null){
                //insert new row at the end and make it current
               int indx = this.getRangeIndexOf(lastRow)+1;
               this.insertRowAtRangeIndex(indx,row);
               this.setCurrentRow(row);
           }else { // empty Rowset
           super.insertRow(row);
           }

Add a new row at the top of a table in GUI

Hi,
I am using JDev 11.1.1.1.0. I need to be able to let users add a new row at the top of a table and not anywhere else in the middle of table rows. I cannot seem to find a way to do it. note that it does not matter where a new row gets inserted in the db, i am only concerned about restricting the insert in the GUI to the topmost line/row.
Thanks,
AJ

Hi
Can you try with writing your custom create method in application module and calling same from UI on command button action like
public void createNewRow()
ViewObjectImpl vo = getVO1();
Row newRow= vo.createRow()
vo.insertRowAtRangeIndex(0, newRow);
Vikram

How can I add a new row in a JTable dynamically?

Dear Sir(s)
I want to add a new row in a Jtable as I press enter key the time focus is on the last cell of the row? pls help

TomDooley wrote:
Hello,
...I write directly to a cvs file ...my loop slows down to 0.2 Hz
Writing a series of 5 values to a file should not take so long. There is probably something wrong in the way you are saving your data. May be you should post a simplified version of your vi, so we could see how to improve your code.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to add a new row at the top of manual tabular form

I have a manual tablular form. I'm trying to add a row at the top of the form, instead of new row of being displayed at the bottom. any ideas are appreciated.
thanks,
Surya

This will depend on two things:
1. sorting of the columns - needs to be a some kind of a descending sorting on a hidden column, enabled within the Report Attributes and not in the SQL Query
2. Report Attributes => Layout and Pagination => Sort Nulls First
You will need to play with those settings a bit. One thing to consider is that you should sort your report on a hidden column and you shuldn't enable the sorting on visible columns, because it will mess up your row positioning.
See this example:
http://apex.oracle.com/pls/otn/f?p=31517:215
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Add multiple rows in detail form in master detail form

Hi,
I have a master detail form to enter survey responses. The master form captures the participant information and the detail form will carry the survey responses. After entering the master record, I need the detail rows to be populated with the survey questions stored in another table. The respondent will then update the response for each row in the detail form. Only after all the responses are filled out, clicking the save button should the detail records be committed.
Is there a good way to achieve this.
Thanks in advance
Gopal

Sorry, did not check OTN until this afternoon. Busy checking existing Apex pages on my project :)
Our region to populate the tabular form has the tabular form fields defined as Display As Text (saves state). Non-enterable fields are defined as "Display as Text (saves state)". A tabular form results from these definitions.
Because Apex won't generate code to handle multipe row tabluar form inserts we wrote our own as an After Submit PL/SQL process, something like
DECLARE
v_rows_found_n number;
BEGIN
--code for debugging
raise_application_error(-20000,'Hello World: '||
    apex_application.g_f03(12)||':'||
    apex_application.g_f04(12)||':'||
    apex_application.g_f05(12)||':'||
for i in 1..apex_application.g_f01.count loop
    BEGIN
      --attempt update first
      update whatever
         set field4 = apex_application.g_f05(i)
       where field1 = apex_application.g_f03(i)
         and field2 = apex_application.g_f04(i)
         and field3 = apex_application.g_f02(i);
      v_rows_found_n := SQL%rowcount;
    --if no rows were updated perform an insert
    if (v_rows_found_n = 0) then
       insert into oe_metric_values(
         field1,         --1
         field2,         --2
         field3,         --3
         field4          --4
      values(
        apex_application.g_f02(i), --1: field1
        apex_application.g_f03(i), --3: field2
        apex_application.g_f04(i), --2: field3
        apex_application.g_f05(i) --4: field4
    end if; --did update operate on any rows?
--exception
-- when others then
--    raise_application_error(-20000,'i'||':'||
--      apex_application.g_f03(i)||':'||
--      apex_application.g_f04(i)||':'||
--      apex_application.g_f05(i)||':'||
    END; --internal loop block
end loop; --loop through tabular form submit elements
end; --pl/sql blockI had to get the identities of the f01, f02 etc. identifiers by looking at the HTML code in the rendered form because Apex assigns those values as it will. Anytime the column display changes in any way i have to go through and make sure the identifers have not changed.
Hope this helps.

Dynamic Action on new row in Tabular Form

Hi Guys,
APEX version is 4.1
I created a dynamic action on change of a select list, if changed then disable the related fields on the same row.
This is working fine for all EXISTING rows on the tabular form.
However, if I click on ADD ROW button, a new row is added to the page, but the change event on select list is
not triggerred from the dynamic action.
Is there any thoughts or workaround on this interesting problem?
Thanks in advance,
Frank

I got it working by adding a onchange event which is triggering js function on the page.

Want to add one new column in Report form

Hi all,
I have searched in forum but not able to find the answer.
I want to add one new column in form 12KST1C. I have added one column PR commitment in left and saved the form, it is showing in form but when i am running the report again then pr commitment column which i have added in form is not coming in report.
How to activate this form or column?
Help me....in doing so...

If you are copying the 12KST1C to Z12KST1C and executing the s_alr_8701333 report, you will not see the new column added to Z12KST1C
With the new Form Z12KST1C, create a new Report Z12KST1C and assign a new TCODE. Also you have to select all rows and column of form Z12KST1C
TCODE CJE5
Select the form Z12KST1C
Extras--Drildown display --Select Rows and columns
Select the all colhmns by F9
Hope this helps.
Edited by: psconsultant on May 20, 2011 8:42 AM

How can I add a new row into an array bases on a1D array

Hello,
I build a FieldPoint application with LabView 7.1 RealTime. I've a measurement loop with 1Hz sample rate. I sample 5 channels and put them into a 1D array. Presently I write directly to a cvs file but this I've to cahnge because my loop slows down to 0.2 Hz.
I want to sample my data the hole day (86400 loops) and save them inside of an array. When the time is over I want write the hole array (table) to the file.
How I can do this or hoow I can add my 1D array to a new row in my 2D array?
Thanks
Thomas
Thomas

TomDooley wrote:
Hello,
...I write directly to a cvs file ...my loop slows down to 0.2 Hz
Writing a series of 5 values to a file should not take so long. There is probably something wrong in the way you are saving your data. May be you should post a simplified version of your vi, so we could see how to improve your code.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Add a new Row in detail form

Similar Messages

Maybe you are looking for