Add a second chapter menu page when using individual movie clips

Hello!
I have imported about 20 short movie clips in iDVD and want them to be displayed in a chapter menu. But if I create a submenu as a chapter menu, I can't find a way to add a second page to this particular chapter menu. Of course I can add a new submenu with chapter menu styles, but then I get an ugly folder button (i'm using the white reflection style) and not a rightwards arrow on the submenu page that links to the second submenu page. If I add a Movie with 20 chapters, I get several submenu pages with left and rightwards arrows to navigate through them. Is there a way to get this effect with seperate clips? I don't want to join the 20 clips to one with chapters, because I want iDVD to return to the menu after playing each clip.
Thanks in advance!
Florian
Mac OS X (10.4.8)

How long is your longest of the 20 or so movies you want to put in? One trick you might be able to use is to add a lot of chapters to that one movie to create a couple/few "scene selection" pages in iDVD. Add that movie to iDVD and the pages will be created.
Now add your other shorts. You can cut and paste between menus, so cut them from the main menu and drop them into the scene selection menus.
The chapters from your long movie can be selected and deleted, leaving only the short movies on those pages. Keep in mind that you are only removing the chapters from the menus. Those chapters will still exist in the movie itself so when someone is playing the movie and hit the chapter forward or back button on the remote, it will jump to the next chapter. But that might be fine.
Patrick

Similar Messages

How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID

Hy experts
How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID?? lets say 500 ?? because my display table it may contain in some cases 10.000 and evidently I can t see all of them..
I have a button in my toolbar witch triggers this event
(display 500 records ) but I don t have the logic to do this only with methods of CL_GUI_ALV_GRID.
can you tell me a standard method of CL_GUI_ALV_GRID witch can help me do this?? any hint will be good..
Till now I was used to add a column to my structure witch represents a flag that is a number corresponding to every 500 records (a batch containing 500 records )
first       500 - flag -> 1
second 500 - flag -> 2
etc..but I m convinced that exists a way of doing this more easy..without damaging my structure..
thanx in advance..don t be shy..reply if you have any hints..

Hi,
if method SET_FILTER_CRITERIA doesn´t help, I think that you must work with 2 internal tables, a counter and a loop for filtering the records to be displayed:
case counter.
when 1.
     loop at int_table1 from 1 to 500.      "<-- your table with all records
       move int_table1 to int_table2
    endloop.
when 2.
     loop at int_table1 from 501 to 1000.
       move int_table1 to int_table2
    endloop.
etc, etc.
Call grid-->SET_TABLE_FOR_FIRST_DISPLAY
   exporting
     IT_OUTTAB = int_table2                "<-- instead of your currently table int_table1

Track Changes in Pages when using Voiceover

Has anyone successfully used theTrack Changes feature in Pages when using Voiceover? I can find out how many changes there are and navigate to them, but it's not good at telling me what the change is so I can decide to accept or reject. Has anyone got any tips for using this feature? I'm using Pages 5.2.

TC,
You might enjoy reading Chapter 4 of the Pages User Guide PDF. You can download it from the help menu.
Jerry

How to add interface to customlize MXML Component when use Flex Builder 3?

How to add interface to customlize MXML Component when use
Flex Builder 3?

David,
I don't believe you can add the interface via the creation
dialog in FlexBuilder 3. You can always manually add the
"implements" property to your MXML Component root tag. Something
like this: <mx:VBox implements="com.mycorp.IMyInterface">
If you want autogeneration of the interface, then create an
ActionScript class with that interface and then copy the generated
functions and setter/getters into the script block of your MXML
component.

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Photoshop CS6 shuts downs when using the move tool

Photoshop CS6 shuts downs when using the move tool. It seemas to run fine until i try and use the move tool. PS worked fine just a few weeks ago and now it has this issue. What can i do to resole this issue?
Thnaks,
System Specs
Windows XP Home SP3
AMD Atholon 64 X2 Dual
2GB RAM
Video Cards
Radeon 7200
NVIDIA GeForce 8400GS

Two displays are OK on one adapter, Two displays adapters are not OK. http://helpx.adobe.com/photoshop/kb/gpu-opengl-support-photoshop-cs4.html
7. If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems when OpenGL and Photoshop use the GPU. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Also make sure that they both support the same versions of OpenGL and Shader Model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.

When using the move tool and or crop tool my whole screen goes black

When using the move tool and or crop tool my whole screen goes black and reappears when I go to another tool???

Hi 25Z4P,
Could you please take a screenshot of the problem you're encountering. I'm sure it is a black screen like you're describing, but it would be helpful to assess what is happening.
Thank you.

Menu Transitions when using scripting

I have a need to have a script run when the user selects "Next Menu" or "Prev. Menu" (to set a value in a GPRM). The script sets a value and then jumps to a button on the next menu.
The problem is that the transition set for the menu does not work correctly. EG A cube transition rotates to black (should see the next menu) and the screen is black for a few seconds and then the menu suddenly pops up. If I set the target to the next menu directly (without using the script to jump to the menu, it works OK.
What gives here???
Thanks

The reason why is that when using a script, the player must go to another domain on the disc, where the script is sitting.
Really no way to get around this in DVDSP. Avoid using scripts and transition unless you can live with black screen.

HP LaserJet 400 MFP M425dn does not print 1/4" of the page when using the feeder

Hello,
When using the feeder to make a copy I lose about 1/4" of my copy along one side.
We copy a lot of full page sheets with little or no margins.
Any suggestions on how to correct this?
Thank you

Most (if not all) commonly available laser printers have 'unprintable margins' on each edge.
On most LaserJet printers, these margins are about 4 mm (0.167"), although on some devices I believe that smaller unprintable area margins (of about 2 mm) can be selected when printing (although possibly not when copying).
When printing with PCL5 drivers, there is also the minimum logical page margin to be taken into account - this is about 6 mm (0.24") by default, although the printing options mentioned above (on some models) can reduce this slightly.
See also http://h30434.www3.hp.com/t5/Other-Printing-Questions/printable-area-cm6030/m-p/4863083/

Pages-when using template for envelopes can you import names/address from address book

When using templates for envelopes can you import names/address from the address book?

Drag the VCard from Address Book onto the open envelope template.
If you want mutiple addresses make a Group of those in Address Book and drag the Group icon onto the Pages template.
Peter

Photosmart 7660 printing blank page when using Microsoft word 2007

I have a Hp photsmart 7660.It will print a Test page ok-it will print some of the text in an email.That is the heading and the end, but not the message in the middle of the email. When I write a document in Microsoft Word or Works the printer will go through the motions of printing but all I get is a blank page.
I have uninstalled and reinstalled using original disk and also tried the same using Hp software download all to no avail.
The utility diagnostic says there is no problem everything is working well,but of course it is not. Can anyone help me to resolve this problem please.

I tried this but didnt work for mr. Can you help? How did you PDFed??
It works for me in Word 2010 (or later) using Save As PDF. It did not work in Word 2007 using the Adobe Acrobat PDF printer nor using Word 2007's save as pdf utility. (The hyperlink showed up but was not active.) It did work using the Acrobat tab in Word
2007 (this requires Adobe Acrobat).
I did this by:
first creating the text box with the hyperlink in the body of the document and moving it into the footer area (but still not in the footer itself).
Then I used the Format tab of Text Box Tools and the Postion button (More Layout Options).
I gave it an absolute vertical position relative to the page.
Then I cut the text box, went into the footer, and pasted it there.
It might have worked to just create the text box in the footer itself.
I personally prefer it that the header and footer are not part of the active page when I am typing. This hyperlink is not clickable in Word without going into the header/footer view and I'm fine with that. The QAT workaround is just fine.
Charles Kenyon Madison, WI

Why does Safari refresh the page when using the back button?

Safari didn't use to do this.
Even on these forums, when you hit the back button to go back exactly where you were at, if there are new posts, the entire page may have changed. I knew exactly the next post I wanted to look at before the page was refreshed. Now, I can't even find the post I wanted to read unless I scroll through the entire list again.
I need to be able to go back to the page I was just on and not have it refresh.
I need to go back exactly where I was.
Safari can't even go back properly as it wants to go back near the top of the last page I was on.
I need it to go back exactly where I was at.
I have no idea what the engineers are thinking about this one.
FireFox works properly when going back to the prior page.
I have long lists on pages I work with.
For example:
1. through 1,000.
If I am on reference number 500 on the previous page, when I hit back, it goes all the way back up to around 20 in the list.
I have to then scroll manually page down to 500 where I was at.
This is tedious, cumbersome and unnessesary.
Safari was much better before it was updated to this horrible behavior.
I don't know of any preferences you can change to change this odd behavior.
Anyone know of anyway to stop this horrible behavior in Safari?
This is like reading a book, but when you go back a page, the entire page may have changed and I have no idea where I was at.
Pretty $iss poor in my opinion.

Yes, that is correct.
However, you can also use the mouse or trackpad to swipe back a page and it still refreshes the last page.
Safari never did this back in Snow Leopard and maybe some versions of Safari in Lion.
However, Safari in Mountain Lion always does this.
It is very cumbersome using the "open link in new window" or "open link in new tab".
It was much better just being able to click the back button or swiping to get back exactly where you were on the prior page.
Hopefully more people will send Apple feedback on this.
Thanks for sharing.

Safari 5.1 reloads page when using back button or gesture

Safari has the strange behavior of reloading pages "navigated to" using the back button or gesture. Most other browsers I've worked with pull from cache when using the back button. I don't think this behavior is compliant with standards - defacto as they may be.
An example of why this is wrong is the navigation of this forum. I just loaded Lion and need to use the forum for support. When navigating back from a particular post to the list of posts the page will reload. Needless to say several hundred posts have been entered since last looking at the list and I subsequently lose the context of what I read last. The list of posts from cache which I orginally looked at should be returned - not the latest updated one. Let me choose when to refresh a page from the cache.
I downloaded Google Chrome to compare behaviors. Chrome does not reload pages navigated to using the back button - it pulls the pages from cache.
I've looked at the configuration of Safari and see no options to configure this behavior.

Switch from one finger swipe to two finger swipe
ok, since i do not have a trackpad, i used my magic mouse. I changed my swipe between pages from one finger to two and my pages no longer re-loaded. Changing that option back to one finger swipe then set my pages to re-load our setting are slightly differnt, but were looking for the same outcome. Lood for a "Swipe between pages option. Then look for a drop down triangle. now change your swipe left or right with two fingers to one. this should re-load your pages now ;-)

HT3737 I need to find out why Izoom in on a page when using my mouse and how do I zoom out?Any help?

Were can I find the info on what cause my mouse to zoom in on a page when viewing Safari. How do I zoom out?

Also check, System Preferences > Accessibility > Zoom > uncheck enable access...

IWeb movie pages, when published -- no movies

my iWeb movie pages, when published, came up lame, no movies, only areas where the movies should have been, all with faint Q's with question marks inside them
LONG STORY SHORT, MAKE SURE YOUR MOVIES (as well as being located in your MAC HD and its proper MOVIE sidebar, that you CUT AND PASTE all your MEDIA YOU'RE USING IN YOUR iWeb SITE,
CUT AND PASTE PHOTOS, MOVIES in dupe form right into your desktop where you've published your iWEB site folder.......that way, any browser, a .mac or outside web host, can locate your media better so that you don't get GHOST MEDIA PUBLISHING LIKE I DID...hopefully this will help both of us
ALSO, in any iWeb website (named SITE in your desktop, or iDisc, or whatever or wherever you publish it, or even if you can find where on earth on your HD it is published, remember, if you have any MEDIA at all, NOTE IN MY CASE MEDIA MEANS MOVIES (not photos, so I'm not speaking to the photo blogs people, only iWeb MOVIE folks) anyway, all the compressed poetry video clips are right there, in a separate folder called MEDIA, that is every iWeb site, when published to .mac or a folder, which contains movies in .mp4 format or .mov format, all these will appear right in your site's MEDIA FOLDER....
this is important as a concept....
also, if you're using an outside web host like me (so that all my movies will LOAD QUICKLY), don't forget when FTP'ing (file transfer protocol'ing) your iWeb changes to your web host from your original MAC HD folder....remember to also send to the FTP/outside web host your MEDIA folder inside your SITE
(which i only realized a couple hours ago, and which totally was a revelation, so i'm passing it along to you guys)....
if you'd like to know exactly what i do here in nyc, i video the poetry scene, now for 20 years, and create educational poetry DVDs.... and my website is today's equivalant of operating a virtual business.....
....oh-oh, since I video poetry in NYC and go direct into a standalone DVD recorder to make single tracks of each poem...and then through Popcorn's mp4 program, I can make a movie file
then..through QuickTime Pro's streaming compression system, reduce that file size to under 5 MBs,
well, after lots of headaches, i am able to have 200 streaming video clips on an iWeb site, which apple itself said was impossible, that iWeb was only geared for less ambitious projects
okay, so that is cool..until yesterday, when i began the whole process again with completely new poetry video clips....
first, the iWeb pages were designed correctly...that took time....then i published the new pages to .mac, and only some of the movies showed up on the published pages, some had a big bright Q (which means the browser identifies the movie and will within 20 seconds load that movie), but what wracked my brain all day and night yesterday, why were there areas where the browser only showed the faint Q/Question mark inside (meaning the browser cannot find the movie)
so what the.....!
also i'm going from an iWed Folder to an FTP so I can use an outside web host and bypass THE MUCH SLOWER .mac browser (too slow when using movie clips for visitor to your site having to wait valuable seconds for **** movie to appear...with outside web host process almost immediate)
.....any similar experiences?

I am having the same problem.
Now I am using iWeb 2.03. So when I uploaded the site to my server I see the Media folder you were talking about, and the videos are there. But when I go to the website I still get the faint Q with the question mark.
Here is my site. http://mnorland.dadeschools.net
The videos are supposed to be in the Athletics page, then go to football highlights.
Any help would be appreciated.

Add a second chapter menu page when using individual movie clips

Similar Messages

Maybe you are looking for