Add a watermark logo only on the second copy

Hi there , I got an invoice smartform that need to be printed in 2 different copies and only in the second i need to put a watermark logo with the "COPY" writing beside... how can I do this ??
than you

ok thanks for this (i already know it) but how I have to create the graphic ??
I mean I create an image with the COPY writing but if I create the graphic element on the page's window of the SF the writing COVER all the other elements

Similar Messages

Ipad 2 can not restart, apple logo only appears 2 seconds after that recharge logo appears for 2 minutes continuously while on the charger

ipad 2 can not restart, apple logo only appears 2 seconds after that recharge logo appears for 2 minutes continuously while on the charger,pls help me

Try a reset; hope it'll force it into Recovery Mode
Hold the Sleep and Home button down until you see the Apple logo.

In SharePoint 2013 navigation, is it possible to add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

If I want to add a custom link to the left-hand navigation menu In a SharePoint 2013 sub-site, it can be done by visiting
Site Settings à Navigation section and adding the link under
Structural Navigation: Editing and Sorting section. However, this will automatically add a matching link to the top menu as a dropdown.
(Note that Global Navigation is set to “Display the same navigation items as the parent site” where “Parent is using Structural Navigation.” and Current Navigation is set to “Structural Navigation:
Display only the navigation items below the current site”)
Is there a way to just add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

Hi Asanka,
Please refer the below link which may help you to resolve your problem.
http://blog.navantis.com/configuring-sharepoint-2013-navigation-to-span-site-collections/
If its not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

iframe link to #anchor only works the second time

I am exploring a way of delivering a local HTML file into a Web Content frame in such a way that it starts at a specific HTML anchor rather than the top of the HTML page.
Now, since DPS's Web Content overlay does not support the URL+anchor string format (e.g. myfile.html#myanchor), I thought I might achieve the desired result by loading a little HTML file into the Web Content overlay that points to the intended HTML file and its named anchor in an <iframe> tag.
Here's where it gets annoying. The solution works... but only on the second and subsequent times you call up the Web Content overlay (normally hidden in a MSO).
The first time I call up the Web Content overlay in my DPS article on the iPad, however, the HTML page displays but not at the specificed anchor point, nor indeed at the top of the HTML page - instead, it seems to start a little bit further down from the anchor. If I dismiss the Web Content overlay (in my case, switch to a different Object State) and return to it, the HTML reloads starting at anchor position, exactly as intended. I can close the folio, re-open it and still the behaviour is correct. It was only the first time that it fails to do the right thing.
I am very happy that my solution works on the second, third and all subsequent occasions, but it's pretty important that readers see it working first time.
I have tried delaying the autoplay of the Web Content but this does not make any difference. The anchor is designated using the 'id' tag.
Any ideas?

Thanks, Neil. But you can ask your guys to stand down. Someone got me a strong coffee this evening and I realised I was tackling this from the wrong angle. I have since seen this issue of HTML pages requiring a refresh before displaying correctly in other circumstances, even in Chrome on my computer, so I doubt it is a specific DPS problem - possibly it's something in webkit.
Anyway, the coffee made me realise that I don't need an iframe to load another HTML file at an anchor. All I need is to pop a little GoToAnchor script in the <head> tag and a call at the beginning of the <body> tag.
One day, if someone fixes Adobe's utterly broken Cookbooks site, I'll upload a bunch of these recipes.

DoFilter() method is being called only at the second request

Hi,
I have implemented a simple Filter class
Here is the code
public class BasicFilter implements Filter
FilterConfig config;
public void init(FilterConfig config)
System.out.println("Filter Initialised");
this.config = config;
public void doFilter(ServletRequest request,ServletResponse response,FilterChain chain) throws ServletException,
IOException
System.out.println("In The doFilter() method");
ServletContext sc = config.getServletContext();
sc.setAttribute("Hello","Hell");
chain.doFilter(request,response);
public void destroy()
System.out.println("In the destroy method");
and a simple servlet
public class FilteredServlet extends HttpServlet
public void doGet(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<HTML>");
out.println("<HEAD><TITLE>Filter Demo</TITLE></HEAD>");
out.println("<BODY>");
out.println(getServletContext().getAttribute("Hello"));
out.println("</BODY>");
out.println("</HTML>");
Now when i start the server (Tomcat 4.0) i find that the filter's init() method is being called which is fine. But when i request the servlet (FilteredServlet) the doFilter() method is not called and only when i "refresh" it or call it a second time that the doFilter() method is actually called. What could be the reason for this.
Help will be greatly appreciated.
Thank You,
Phani Kanuri

Hi jleech,
Thanks for the reply. But deleting all the temporary internet files as also the history files does not seem to have an effect. the doFilter is being called only at the second request. or did i miss anything??
Please help. unable to complete the assignment because of this.
Thank You,
Phani Kanuri

Button action only from the second click on

Hello, everybody!
I´m facing a weird problem on my application. I have a button that
takes action only from the second click on. My vi has several buttons,
all of them have the same type, and all of them work properly(since the
first click) except one.
I gave up a few minutes ago...any ideas?
Thank you,
Luanna

Hi
Well this sounds quite strange. The best way to help you is to comment your vi. I think a picture is not enough, as we have to see the behaviour.
So - is it possible for you to post the vi here?
Using LV8.0
Don't be afraid to rate a good answer...

Hi all, how to check the second copy in the smartform

HI all,
 I must print the text 'Duplicate Copy' in the second time printing document in the smarrform, i how can i check whether the pages that are given for printing and which one is the first copy of printing and which one is the second copy of printing.
Can any one give the answer for this.
Thanks,
Ravi Kumar

Hi Ravi,
 You have to make use of Alternative node. Keeping your window name selected, right click, Create -> Flow Logic -> Alternative.
%CONDITION will be created under the window. In this %CONDITION, General Attributes tab, give

Field Name Comparison Value
SFSY-COPYCOUNT = 2

Under %CONDITION1, under True, create a text (%text1) node, in that write Duplicate Copy. This text Duplicate Copy will only be printed if you take the printout for the second time.
Hope it helps!
Regards,
Abdul
P.S: Reward points, if useful!

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

The computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

I'm not sure if I'm in the right forum for this question, but I don't know where else to ask about installing on cross platforms. So, the computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

Which Adobe product exactly?
Cloud: yes.
Creative Suite: no.

Create the second copy, delete and the first copy serial (Archive Deletion)

Hi Experts,
I am new to DB2 and i want to enable "-cds" Option (Create the second copy, delete and the first copy serial) while performing online backups. Though this option is available in "Oracle" and we can schedule the same in DB13 itself.
If you can please guide to enable this feature in DB2 via DB13 ?
Regards,
JAI

Hello JAI,
which tool you´re using to create the online backups?
The command to prune could be as followed:
db2 prune history and delete
It will be helpful if you monitor your db2diag.log during this to see whats happened.
Regards
Olaf

Narative view can only download the second report

All,
I have created two account reports. In the first report I added a narrative view and embedded the second report. They work fine. However, the users will need to download both reports to Excel and only the second report embedded in the narrative view has the download link displayed at the bottom.
Is there a way to get the download link to appear after the main report?
Many thanks in advance,
Dan

Dan,
Why dont you add both the reports as part of narrative section in a third report?

How do I fix syncing issues between my iTouch and iTunes? My iTouch shows I have two copies of one song but on iTunes it shows I have one copy. I only purchased one copy too so where did the second copy come from?

Yesterday I purchased a few albums and CDs from iTunes to my iTouch. After charging my iTouch, I noticed some of the songs weren't there. So I checked my iTunes and they were still downloading so I synced them up to each other. For the 1st hour, there was only one copy of the song. Later on, when I hooked up my iTouch to see if my info corresponded to iTunes, I saw that there was additional copies of the same song on a few albums and some copies of individual songs. I didn't purchase them twice either. Now I have two copies on my iTouch but not my iTunes so I can't delete the additional copy.

Right now, I tried deleting all of the music and resyncing it from my iTunes directly to my iTouch. Hopefully this will solve the problem.

Button catches the Event only on the second click

Hi Experts,
I am new to adobe forms and facing a very strange problem. I have 2 buttons on my interactive form "SUBMIT" & "APPROVE" , now the problem is whenever i load my application(Webdynpro ABAP) for the first time and click any of the 2 buttons the event
ONSUBMIT of the ui element Interactive form is not caught(control doesnt reach the event) , but when i click any of these buttons from the second time the control reaches the breakpoint successfully.
I donot understand where i am going wrong , is there some java script that needs to be written in the initialise event of the buttons to make them trigger the event from the first click itself.
Thanks In Advance,
Chaitanya.

Hi Chintan,
Thanks for your replies, there wasnt any specific reason for using check field buttons was just experimenting with the component.
Script in the Click event for button 1:
// DO NOT MODIFY THE CODE BEYOND THIS POINT - 802.20071213024549.437972.422152 - SubmitToSAP.xfo
                      ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
                      // END OF DO NOT MODIFY
Script in the Click event for button 2:(i am setting a flag when it is clicked)
                    var ref3 = xfa.resolveNode("xfa.record.APPROVE");
                    var ref2 = xfa.resolveNode("xfa.record.APPROVE").value;
                       ref3.value = "X";
                      // DO NOT MODIFY THE CODE BEYOND THIS POINT - 802.20071213024549.437972.422152 - CheckFields.xfo
                      ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
                      // END OF DO NOT MODIFY
Version of ALD : 8.1
Adobe Reader : 8.
Should there be some code written in the initialize event of the button ?
Thank you for your help so far,
Chaitanya.

HT1539 Why do I only get the SD copy of a digital download when I bought the blu-ray HD film?

Just bought the 3D Blu-ray version of Prometheus and was pleased to see it came with a digital copy, however on redemption in the iTunes store it only downloads the SD version. Is this standard practice? Why don't they give you the HD version of the film if you buy the blu-ray HD version?!

When I put my redemption code in, I immediately got three downloads: HD 1080p, SD and iTunes Extras.
Is your device compatible with HD (because if not it will default to the SD version)?
If so, have you selected a preferred HD format in both the Playback and Store tabs in iTunes Preferences?
If you visit the Prometheus product page in the iTunes store, do you have the option to purchase a HD version? If there is, it should say "(Downloading [format])", where [format] is what you have selected in Preferences.
See here for more information.
If your computer ticks all the boxes, I suggest sending Apple a support ticket.

HT201229 I received an unsolicited message from a phone number which I now learn is a trap. I deleted the message and the second copy of the same without replying - there is a suggestion that you ca stop it by replying STOP but messages on the web say thi

Hello
I received an unsolicited message from a phone number. I deleted it.
A second copy arrived and I deleted that too.
The message says send STOP as a reply and it will be stopped but the web says this is a way to give the sender access to your account and they will charge you £3 every time.
Did i do right to delete it?
How can I block a number? The system on my iPhone iiOS 8 and Mac Yosemite will not allow it.
How can I change my status (as I do on Skype) to stop these messages safely?
Anythoughts?
"Applemany"

Why not using ASP?
If on your webpage you have some buttons that runs at server, the server can create a web Client and using your IP address retrieved from the cession, communicate with your application (that will act as web Server).
then the web client on the web server can send request to your VB application and read a stream as response.
This web client being control by the buttons on the web page, gives you complete control over what and when the data is sent
This way you will have a complete control over the VB application from the web page.
I am not saying that the way you want to do it cannot work, ... but it seems more complicated

Add a watermark logo only on the second copy

Similar Messages

Maybe you are looking for