Add Accounting View to material

I am trying to add an accounting view to a material. The material type was UNBW so I used transaction MMAM to change to material type HALB.
Now I go to MM01 and the system does not give me the option to add the accounting view. I know that UNBW materials should not have an accounting view. It is as if the system does not see that the material was changed from UNBW to HALB.
Joel

Hi
to add additional view to the HALB material or any other material type use Tcode "mm50". try this
or
one more option is using tcode mmo1
giving your halb material number twice means in material number place and copy from material place
when you enter into material master screen there will be additional tabs of screens which are not filled when you select them it will ask view is not maintained would you like to maintain then add views. is the same way which are using to add accounting view.
Edited by: ppkk on Oct 1, 2008 10:04 PM

Similar Messages

Problem with Accounting view in Material Master

Hi,
One of the material master does not have the accounting view and the costing views attached to it. When trying to extend the views thru MM01, the system shows the following message -
Material already maintained for this Transaction/event
What we understood is that the views were already extended earlier but still does not show up.
Any help extended is highly appreciated.
Regards,
Mike
Edited by: Michael Gerard Leo on Mar 10, 2009 4:35 PM

Hi,
After we extended the accounting view in MM01 for a particular plant and saved it, we are not able to view it through MM02 or MM03.
Again, if we try to extend the view for the same plant in MM01, the system gives an error message that it is already extended.
Any reasons why the accounting views are not showing up in MM02 and MM03.
Regards,
Mike

Period change is not appearing in accounting view of material master

Hello SAP lovers
As we know once we close the period with MMPV, Latest perion appeared in material master --> Accounting view.
Now period open is March 2007 for a company code. It is expected that material created in all the plants assigned to same company code should display latest period in accounting view. This is happening for all thousands of material in system but i found 1 material which is displaying the period as Nov 2006.
I have doubled check that this material is created for the same plant which is assgned to the company code for which Mar2007 is open....
Anybody ......Any clue......
Best Regards
Avinash

Hello Mani
I have already checked all the open items.....
No sale order. No entry in table MSEG.
Only one PO without GR.....So that should not make any difference.
Br
Avinash

Add sales view in Material number

Hi,
We have a material, which don't have Sales View.
How can we add sales view in it.
But this should be done for only 1 Material. because through oms2 transaction, we can extend according to material type..
Plz. guide...

>
Anil.Sap wrote:
> We have a material xxxxxx in plant A without sales view (because we are using Production Resource Tools material type, and in our configuration we dont have sales view in it).
>
> so we want sales view only in 1 material number.
>
> and after add sales view, we have to extend that to plant B.
>
> plz guide, how to add sales view in 1 material.
You can only add a sales view to a material if the material type customizing allows sales views in general.
you certainly cannot create a sales view for a single material if the material type does not allow sales views.

Mass Change Standard Price in Accounting view of material master

Hi anybody,
I am maintaining more than 5000 records material master . Each time change material prices using MR21, but I don't want go MR21. need to develope one abap program for change material standard prices using BAPI or normal ABAP Program. how do I develope?
please give me sample program for that.
Thanks
S.Muthu

Hello Mani
I have already checked all the open items.....
No sale order. No entry in table MSEG.
Only one PO without GR.....So that should not make any difference.
Br
Avinash

Material Master add Accounting tab

Hi:
I have a problem with material master, I hope you could help me. I have create a material in a plant as copy of a existing material/plant. The old data has no accounting tab, but in new data, I need it.
Is it possible to add accounting tab in Material Master? Or is better delete material and create a new one?
Thanks in advance for your response.

Hi Mario,
Go to MM50 Trxn code and Give Maintenance Status as B and Created Date and execute. It will show you all the material created as per the said date and select your material and click on maintain materials and it will show you only accounting view.
Now give the Accounting data and save. Normally this process is used for Mass changes.
You can also use MM01 trxn code to extend.
Reg,
Ashok
Assign points if useful.

Total Stock in Accounting View for Non valuated material

Hi,
There is one plant 1050 which is non valuated (only Qty updation ).I maintained accounting view with value 0. I will do 501 movement.
It is showing me in MMBE tcode.
But when I go to check in accounting view it is zero.If it is non valuated whether stock gets updated in Accounting view of material master or not.
This problem we are facing at client location.
Please help me in understanding.
Regards
Raghavendra Pai

Hi,
It is not a problem, this is standard SAP, since the material is non valuated, you could not see the stock in Accounting view.
Normally for non valuated material, no need to maintain accounting view. Even if you maintain stock will not be reflected in that view.
Regards,
Prabu

Diff stock GL account for raw material

Hi,
We have raw material under 2 different location, one is under raw material warehouse, another one is under staging area which belongs to production. From time to time, we will issue stock from RM warehouse to staging area.
The stock GL account (either debit or credit) for the raw material is RM Stock (140001) when we do any movement.
But we do not want like this. We want that when there is any movement from raw material warehouse location, it will charge to GL account 140001 (RM Stock). And when the movement is from starging area location, it will charge to another GL account (140002 - production stock).
We want to seperate out the GL account for the raw material if they are under different storage location.
Can this be done?
Kindly please advise. Thank you.

Hi Sim
Valuation of Stock is done at Plant level and not Storage Location Level. Within a Plant, you can differentiate the G/L accounts based on the Valuation Class assigned in the Accounting view in Material Master.
The above settings enable automatic account determination at the time of GR. If you want different G/L accounts for different areas, there are 2 options:
1. Configure and Activate Split Valuation. This will enable you to give different Valuation Classes for different Storage Locations in Matl Master.
2. The better option is to make the 2 locations as 2 different plants and extend the materials to both these plants.
However, pls mention your purpose of differentiating the G/L accounts. If it is only to view the stocks in the 2 areas, there are many reports like MB52, etc.
Hope this clarifies.
Thanks

MM01 Error - Accounting View

Hi All
When i create a Raw Material in
Industry Sector : Mechanical Engineering
Material Type : Raw Material(ROH)
System throws an error " Please Enter Moving average for this material"
Please Suggest
Regards
Jagadish

Hi,
Enter Moving average price of material , if u have slected price control u201CVu201D and then save.
If u do not wnat accounting views for material creation, then do not select that views during selection of views after entering
Industry Sector : Mechanical Engineering
Material Type : Raw Material(ROH)
Note:
Generally Moving average price (price control u201CVu201D) is used for raw material & for semi finished and finished goods for Standard price procedure (price control u201CSu201D) as moving average price in case of external procurement and standard price for in house production. But its all depends on business requirements.
Regards,
Biju K

ACCOUNTING VIEW IN MAT-TYPE - NLAG & UNBW

Dear cons
can u tell me is there any accounting view in material type - NLAG aswell as UNBW. WAITING FOR YOUR EARLY RESPONSE. bOTH THE CASES VALUE ARE NOT UPDATED.

Hi
As NLAG means Non stock material but you want to have valuation then for this Accounting should be there.
And UNBW means Non valuated material means no accounting entry related to value then no accounting view.

Account view?

Gurus,
Accounting view in material master belongs to client specific or company code specific?
And aslo, in material master, how many total views are there?(starting from basic data1 view)

Hello,
Accounting view data in material master is valuation area specific.
Valuation area can be either plant or company code. But most of the cases valuation area will be plant level. You can check the same in T.Code OX14
If you are saying about the field selection, it depends on various factors as you can assign field selection for your industry sector / Plant / material type.
Regards

Current period in Accounting 1 view of Material Master

Dear Experts,
In Accounting 1 view of Material Master there is a current period, now it is 12 2009.
Is it possible to make it 11 2009, if yes how to do it.
Please help if you have solution. it is very crucial for me.
Thank you for your support.
Regards,
Zusen

Hi,
Please read the Solution part of note 487381. There is still a few things need to be carry out before you can proceed
with the initialization :
Bear in mind that the initialization of a posting period has the
following effects concerning the period stocks:
    o The initialization of the posting period to a previous or to any
       posting period may lead to the loss of the information of the
       inventory balances of the previous periods.The book value of the
       current posting period is taken as the basis also for values of
       the previous period in this case.
       If you want to continue working with this new posting period, in
       addition you should execute report Z_DEL_HIST_ENTRIES attached so
       that history entries greater or equal to the new posting period
       will be deleted.
    o If you have to briefly reset the posting period by one period
       (for example, postings must still be posted in a certain period)
       just to make a correction (and for a small number of postings),
       you should initialize the posting period back again to the old
       value so that the values of the previous period will not be lost
       (you should forbid postings when carrying out corrections).
       However, afterwards the values of the previous period or the
       history records (as of Release 4.5) of the materials posted in
       this case are inaccurate.
       You should NOT execute report Z_DEL_HIST_ENTRIES in this case.
    o However, if the posting period is generally reset again to a
       previous posting period and if postings were made during this
       time, all information on the inventory balance of the previous
       periods is lost.
       As of Release 4.5a, you should use the cited correction report
    Z_DEL_HIST_ENTRIES in order to delete history records that are
    more current than the current posting period.Otherwise, it can
    result in deviations (inconsistencies) for the update of the
    history records.
o Important! If there are open physical inventory documents that
    have status 'counted' or for which indicator 'Freeze inventory
    balance' has been set, you should reject these if they refer to a
    previous period or have been created in the former previous
    period.The inventory difference to be posted can be determined
    from the current book value of the previous period and the book
    quantity frozen in the physical inventory document (ISEG-BUCHM)
    and does not match the inventory balance of the previous period
    that is currently valid.

How to add new columns in materialized view

We are using Oracle 10g Release2.
We need to add new columns to a prebuilt fast refresh materialized view. We want to add 4 new columns in this table and make them part of select statement in the materialized view. We can drop the view but we cannot do complete refresh after that because the paymentsInfo table has a creation_timestamp column which is populated by before row insert trigger with systimestamp. If we did the complete refresh, all values in this column shall be changed.
CREATE MATERIALIZED VIEW paymentsInfo
ON PREBUILT TABLE
REFRESH FAST
ON DEMAND
START WITH SYSDATE
NEXT SYSDATE+5/1440
WITH PRIMARY KEY
DISABLE QUERY REWRITE AS
SELECT PAYMENT_ID,BATCH_REFERENCE, TRANSACTION_REFERENCE, NO_OF_TRANSACTIONS, DEBIT_ACC_NUM,... from payment@dblink
I want to know is there any other way to add new columns without losing any changes from the master table.
Thanks.

There is no way to add new Columns to Materialized view. To add new columns, it has to be dropped and re-built again.
Extract from Oracle Documentaion:
Use the ALTER MATERIALIZED VIEW statement to modify an existing materialized view in one or more of the following ways:
To change its storage characteristics
To change its refresh method, mode, or time
To alter its structure so that it is a different type of materialized view
To enable or disable query rewrite
If you have a problem of Complete refresh, then It may be beneficial to get the backup of the MView; Drop and re-create it with modified definition; Restore the backup data leaving the new columns untouched (assuming they are to be kept as fetched from the Master site).

Accounting 1 and Costing 1 View in Material Master

Hi SAP Gurus,
I noticed that we only have "Accounting" and "Costing" views activated in Material Master in our current SAP environment. I don't see "Accounting 1" and "Costing 1" views available. Could someone tell me how to activate these views?
Thanks,
Cassandra

Check this path out for adding views to material type:
Spro>Logistics-General>Material master>Basic Settings>Material types>Define attributes of material type, then click execute, then double click on material type you want to edit, here on right side you will see user departments, you need to get Accounting and costing view highlighted and click save
In MM01, you need to extend the view for accounting 1 and costing 1. Enter your material number and click enter, here when you see views, select accounting 1 and costing 1, maintain data in the said views and save the material, your material will be extended to the said views.
Edited by: Afshad Irani on Apr 22, 2010 10:56 PM

Material without Accounting views

Hi,
I created a new material without Accounting views and I assigned its material group to a valuation class in Tcode OMQW (and in OBYC I assigned the appropriate account to this valuation class)
Then I tried to create a PO with this material, the problem that is the system didn't determine the GL account automatically even though that the material group of the material is assigned to a valuation class
Please how to solve this ? must I create Accounting views for this material even that I worked with material group ?
Regards.

Hi
The purpose of Accountin views is not just to provide GL for accounting purposes, but also update the stock and its value upon GR
So, you would need to have Accounting views for sure...
Regards
Ajay M

Add Accounting View to material

Similar Messages

Maybe you are looking for