Add Act GI date in VL06O

Dear All,
How to add field "Actual GI date" in output Report VL06O
Would you like help me please
Best regards
Imron

>
Muhammad Nur Imron wrote:
> Dear All,
>
> How to add field "Actual GI date" in output Report VL06O
> Would you like help me please
>
> Best regards
> Imron
You will have to change the structure LIPOVZ and include the field WADAT_IST to include the actual goods issue date. You will require abap rights for this purpose.
Once the change is made and transported, run the report BALVBUFDEL in SE38. This will update the screen layout tab.
You will now be able to change the new field.
Check sap note 128150 for this.
Regards,
Aroop

Similar Messages

How do I add to my data plan on the iPad once I have run out of time and no longer have an internet connection?

How do I add to my data plan on the iPad once I have run out and no longer have an internet connection? I am working out of the country and got a message that I was running low,followed immediatly by a you're out message.

Should you not be asking your carrier? They are the people supplying your data plan.

Automatically add a current date at the end of the comments

Hi,
I have a form on a table with 5 fields... on one the field I am asking my users to enter comments...
I am looking for a functionality to automatically add a current date at the end of the comments, only when they are updated or newly filled in...
Please advice how can I do it... I am anticipating some sort of a trigger on column (when the data is modified)...
Thanks

automatically add a current date at the end of the comments, only when they are updated or newly filled inDo you want to add the date to the page item itself and hence show it to the end user as and when its changed, thn
Assuming comments item is named '*P1_COMMENTS* , add the following to the "execute on load"
$('P1_COMMENTS').change( function(){
var d = new Date();
$s('P1_COMMENTS', $v('P1_COMMENTS')+ d.toUTCString() );
});If its to be done only when updating ie in the PLSQL block
UPDATE <table name>
SET <comments _column> = ( SELECT DECODE( NVL(<comments _column>,'')
                                                                      ,NVL(:P1_COMMENTS,'')
                                                                      ,<comments _column>
                                                                      ,:P1_COMMENTS||TOCHAR(SYSDATE,'DD-MON-YYY')
                                              FROM DUAL
WHERE <condition>

How to add a new data type of oracle to SIM(7.0)

Hi........
I need to add a new data type(CLOB) to SIM of oracle .can anyone tell me how to modify or add this new data type.
Any pointers to this will be highly appriciated.......
thax in advance...

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

List and table controls -> listbox..is that what you are thinking of?
The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
MTO
Attachments:
Listbox_example.vi ‏34 KB

HT201401 I can't add a contact or edit contacts the little + sign is no longer on my phone...same thing on my iCalendar. I can no longer add events or dates. how do I fix this?

I can't add a contact or edit contacts the little + sign is no longer on my phone...same thing on my iCalendar. I can no longer add events or dates. how do I fix this?

Reset your phone, hold the home and off button down until the apple symbol comes up. If that doesnt fix it then you need to restore your phone in itunes, Connect to itunes, right click on your phones name to the left, then click restore from backup. That providing you have backed up your phone recently.

How do I add the capture date and time to the bottom corner of a photo?

How do I add the capture date and time to the bottom corner of a photo?

Not to the bottom, that I'm aware of, but to the top right or left in Grid view or to the top left in Loupe view. It is in the View Options.

How to add more summary data in the MIP of Compensation workbench

Hi all,
In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
How to implement it?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How do I get numbers to automatically add the next date down a column in numbers?

How do I get numbers to automatically add the next date down a column in numbers?

Hi Dd,
If you want the next date automaitcally filled in when you add a row to the bottom of the table, you can use a formula.
Here's an example, done in Numbers 2.3 (Numbers '09). The method is basically the same in Numbers 3.
Formulas in row 3:
B3: =B2+1
C3: =C2+7
D3: =D2+14
These have been filled down to the last row of the table.
The same table is shown below after three rows have been added by dragging the Row control handle (below the tab for row 7) down. No changes other than adding thse three rows were made by the user.
Note that rows 1 and 2 are header rows, and that row 2 contains the starting date for the seraies of date in each column. In the formula, the number at the end tells Numbers how many days to add to the previous date to get the next date.
Autofill of the formula requires that every non-header cell located above the cell into which the formula is to be filled contains the same formula.
Regards,
Barry

I want to add image in column is it possible then how to add image in data base what data type we need to do

I want to add image in column is it possible then how to add image in data base what data type we need to give we required any casting please show me one example
jitendra

Hi again,
Several points that can help more:
1. If you are working with Dot.Net, then I highly recommend read the first link that you got! This is nice and simple coding. Another option is this link which is even better in my opinion:
http://www.dotnetgallery.com/kb/resource21-How-to-store-and-retrieve-images-from-SQL-server-database-using-aspnet.aspx
2. As i mention above both link use the column's type image. There are several other option of working with Files. In most of my applications architecture I find that it is better to use a column which let us use any type of file and not an image column.
In choosing the right column's type for your needs basically your fist question should be if if you want to store your data inside relational database environment or outside relational environment. It is a good idea to look for blogs on this issue. Next
if you chose to store your data inside then you need to chose the right column type according to your server version. I highly recommend to look for blogs on the differences between those column's types: IMAGE,
Check those links:
To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
http://research.microsoft.com/apps/pubs/default.aspx?id=64525
FILESTREAM feature of SQL Server 2008
http://msdn.microsoft.com/library/hh461480
FileTables feature of SQL Server 2012
http://technet.microsoft.com/en-us/library/ff929144.aspx
Compare Options for Storing Blobs (SQL Server)
http://technet.microsoft.com/en-us/library/hh403405.aspx
Binary Large Object (Blob) Data (SQL Server)
http://technet.microsoft.com/en-us/library/bb895234.aspx
Managing BLOBs using SQL Server FileStream via EF and WCF streaming
* Very nice tutorial!
http://petermeinl.wordpress.com/2012/02/20/managing-blobs-using-sql-server-filestream-via-ef-and-wcf-streaming/
[Personal Site] [Blog] [Facebook]

Standard Documentation for Add-on and Add-on's Data Base?

Hi!
I'd like to know if there is a stantard to create documentation for Add-On and Add-On's Data Base to get the Add-On's Certification.
Thanks!
William

> When applying add-on images to our base the primary MSI's install just
> fine but none of the MST's and MSP's do not apply.
I meant to say that none of the MST's and MSP's apply. Sorry about that.

Can Verizon add the pay date to the e-mail that is sent for billing reminder.

Can Verizon add the pay date to the e-mail that is sent for billing reminder.
Then you would have to sign on to look that up.
Your current bill
for your account ending in 4609-00001 is now available online in My Verizon
Total Balance Due:
$261.11
Keep in mind that
payments and/or adjustments made to your account after your bill was
generated will not be reflected in the amount shown above.

The email is quite direct. Log on to my verizon at www.verizonwireless.com and on the front page it tells you your due date.
as a rule unless you requested paperless billing, you will get a paper invoice in the mail as well.
it is due before or on your account closing date. My service runs from the 5th. of the month until the 4th. of the next month so the bill must be paid on the 4th. at the latest. (if paying on line)
if you pay by check you have to mail it at least five days in order for it to reach the payment processing center, or you can pay at any verizon wireless corporate store via check, credit card or bank debit card.

This is how to add extra Exif data to Aperture :-)

Folks
Often I need additional Exif data in Aperture - which is not available in the standard install.
For example - exactly which lens did I use - not just a focal lenght - which might be any one of various lenses I have.
Or - which focus point was used?
The list is endless...
If you are interested - go to this thread in dpreview
http://forums.dpreview.com/forums/read.asp?forum=1017&message=22939488
A neat combination of an AppleScript and ExifTool
Go for it
Brian

Hi,
I'm the "author", if you can call it that, since most of the script is, as someone earlier mentioned, Brett Gross' work. I was the one that glued exiftool to it and got it working with my Aperture setup. I am looking at the various problems that have popped up on dpreview and with personal correspondence and trying to find solutions.
But it isn't easy. As Charles said, the Aperture dictionary isn't helpful in that regard. And with the flexibility that Aperture provides in naming is the curse here. And all the variables with versions, external edits, etc. It gets very complicated. But if you look at the thread on dpreview, someone has possibly found a way to query the SQL database to make it all work smoothly.
It is very easy to do this stuff at import. I am just putting the finishing touches on an Automator action to import the files and add the EXIF data (it will even query GeoNames and add the city, state & country IPTC data if there is GPS data present in the file).

CWB: how to add more summary data in the summary section

HI All,
We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
under the worksheet, there is a link:
Personalize Dynamic Columns
But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

Add Act GI date in VL06O

Similar Messages

Maybe you are looking for