Add Air Port Express to existing wired Linksys router? Or..

Should I buy a new, non-mac wireless router to connect a new MacBook (wireless) and an existing PC (wired). Air tunes is not a priority.
I'm primarily interested in what would be the best setup, but if adding Air Port Express to an existing Lynksys is a major pain, that would factor into my decision.
Thanks!

Welcome to the discussions!
I use a Netgear WGR614 with my 2 PCs and 2 Macs and it works very nicely. It is going for $39 at Best Buy right now.
Since the network is already set up, just swap the Linksys for the Netgear and add your WPA key to secure the wireless and you are set.

Similar Messages

  • HT4259 We decided to set the Air Port Express in a room using only the power outlet and relying on the existing wifi signal...we have a verizon modem and didn't want to mess with connecting the Air port express directly to the verizon device.  It didn't w

    I bought a Air Port Express device from Apple yesterday.  We decided to set the Air port device in a room near the router to use as a wifi extender to areas of the house where the signal is weak.  In our discussion with Josh, the Apple Rep.  he explained how it can either be connector to the router or use in another room relying on the existing wifi signal to extend it further into the house.  We have verizon DSL.  Our town is very small...no cable provided so we are lucky to have what we have...some areas of our town can't even get what we have.  We, didn't want to connect it directly to the Verizon device (router)....we followed the directions from Josh as well as the explicit directions provided by Apple support...it didn't work. We keep getting an error message.  Does anyone have any advice ?  Any help would be greatly appreciated.  Please speak in "Laymen's terms"  I am not technically savy....but..am determined to get this set up.  Thanks to anyone, in advance!
    Signed,
    MEAbeep

    In our discussion with Josh, the Apple Rep.  he explained how it can either be connector to the router or use in another room relying on the existing wifi signal to extend it further into the house.
    Unfortunately, it appears that Josh was not aware that the AirPort Express can only "extend" a wireless signal from another Apple router.
    From Apple's literature:
    Extend an existing Wi-Fi network’s range.
    If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.
    The AirPort Express is not compatible with a Verizon product for this purpose.
    Your might want to have another conversation with Josh to ask his advice on how best to proceed at this point.
    If you do decide to keep the AirPort Express, it will be necessary to connect it to your Verizon router using a wired Ethernet cable connection if you want the Express to provide more wireless signal coverage.

  • HT1515 Can I use Air Port express as a signal extender for SKY Broadband router in UK?

    Can I use Air Port express as a signal extender for SKY Broadband router in UK?

    You are going to have to turn OFF Wifi on the Sky router device so its just a modem.
    String an Ethernet cable off of the Sky router to an Apple Airport/Time Capsule device and have that create a stable WiFi network.
    Using WDS protocols you can now add additional Apple Airport expresses as needs be to extend the Wifi signal area.
    In theory you should able to extend an existing network however inter-operability between differing manufacturers is flaky at best.
    Caveat using extenders Will degrade the performance of your network.
    So its going to be more expensive - Need Two Airport devices and you my need support in creating the network (you may have to log in to the Sky provided routers advanced settings in the Java Control Panel and from a web browser to turn off features such as Wifi and IP addressing)
    You may be better contacting Sky as they may actually have a compatible network extender (BT certainly do for their Home Broadband routers) available.

  • Add air port to time capsule

    add air port to time capsule

    Which AirPort model will you be adding to the Time Capsule network?
    Do you plan to add the AirPort by connecting it using a wired Ethernet connection to the Time Capsule?
    or
    Do you plan to add the AirPort by connecting it wirelessly to the Time Capsule?
    What operating system are you running on your Mac?

  • Changing the base station from Air Port Express to the Time Machine

    Some years ago I bought an Air Port Express. I set it up to connect iTunes to my home stereo but it never worked very well and after a few months I gave up and put it in a draw.
    Last year I bought a Time Machine and succesfully set it up. I also established a wireless network which connects to my PC and Blackberry.
    Recently, I've been encouraged to try to set up the Air Port Express again. I had assumed that the Time Machine had been established as my base station and that I would now use the Airport Express as a wireless extender and try again to use it to connect to my home stereo.
    However, in setting it up it become clear that my Air Port Express has the status of a base station with its own wireless network (which I don't want to use).
    I can't figure out how to change the Time Machine so that IT is the base station and the Air Port Express is a secondary point connecting to wireless network created through the Time Machine.
    Thank you in advance for any help or advice that you might have.
    LS

    Thanks for the info. Unfortunately, this older "g" device is really going to drag down the performance of your Time Capsule.
    You'll need to use a WDS type configuration, which is an older "g" technology. The setup for this type of configuration is complex and difficult for most users. If you get the configuration right, there are still unfortunately going to be two big negatives with this type of setup.
    1) Since WDS is an older "g" technology, everything on your faster "n" Time Capsule will drop down to "g" level speeds. That's a huge loss.
    2) When you add the Express to the network, the bandwidth will drop by 50%
    Bottom line...you would wind up with an older "g" wireless network throughout that would be operating at one half of it's capability.
    If your budget allows, a new AirPort Express 802.11"n" would provide far better performance and would be much easier to configure for your network.
    Message was edited by: Bob Timmons

  • I have Verizon FIOS and I am trying to connect an Air Port Express to my Directv

    I have Verizon FIOS and I am trying to connect my Air Port Express to my DirecTV.  My iMac does not see the airport express, even though the light is a solid green and connected to my HD-DVR.  Any ideas?

    Assuming your modem is wireless use Airport Utility to configure the AEX to extend an existing network. The modem's wireless router should be configured to allow its network to be extended.

  • Using an Air Port Express for stereo

    Hi, my Air Port Extreme Base Station recently broke. It was the old flying saucer model. I also have an old Air Port Express in another room connected to my stereo. Do I have to get a new Air Port Extreme base station to connect to my Express for the wireless speakers, or can I just get a cheaper Linksys "N" router? So to sum up, will a linksys wireless N router connect to my older Air Port Express? Thanks.

    Your older AirPort Express (AX) should be able to join the Linksys wireless network, but since the AX is a "b/g" device, you will need to configure the Linksys to broadcast a "g" compatible signal so the AX can connect.

  • HT4145 is it possible to use a sngle air port express both for streaming music to an audio system AND as a wireless base station

    is it possible to use a single air port express both for streaming music to an audio system AND as a wireless base station

    Yes you can - if it is your only router or it is after another Apple router - if you have a non-Apple router then it would have to be hard wired to create its' own wireless network.

  • What do I need to connect my new Yamaha RX-V671 receiver wirelessly to my Air Port Express?

    I have just received my new Yamaha RX-V671 receiver and the only connection I have for the internet is by a network cable or by a USB slot.  I would like to hook this up wirelessly to my Air Port Express, I just need to know what I need to get so I can stream my itunes to this receiver.  My receive is roughly about 50 feet from my Air Port Express. 

    but what I was hoping to do is hook up my receiver wirelessly
    Sorry, but if the receiver only has an Ethernet connection or USB...as you say....then you are going to have to use some kind of wireless-to-Ethernet adapter....like the AirPort Express that I suggested....or another similar product to accomplish your goal of providing a network connection to the receiver.
    It would be wireless from your "main" AirPort Express to the second AirPort Express, with a short Ethernet cable from the second Express to the receiver.

  • I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

    I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
    I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

    If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal.  In this type of setup, each Express communicates directly to the Time Capsule.
    How did you setup the AirPort Express devices?
    What version of the Mac operating system are you using on your MacBook?   Or, do you have AirPort Utility installed on your iPad?

  • I have air port express 802.11n and imac ver 10.7.5.  When I try to set up my wifi I get error message 'that the version mac os x is not supported' Help?

    I am trying to set up wifi using air port express 802.11n version 1.3 on my imac os x ver 10.7.5.  Get error message Air port can't be installed on this disk that the ver of mac not supported - Help????

    Please check the model number on the side of the AirPort Express in the faint print. It will start with an "A" followed by four numbers, as in A x x x x.
    Post back with your findings.

  • Air port express and ipad, iphone, apple tv

    i have my audio speakers plgged into my 3 air port express for 3 rooms in my house. when i use my old apple tv, i can play my music on all 3. however, on my ipad, itouch and mac computers, i can only do one at a time. Why?

    The iPod Touch does not have the "Multiple" speakers function.
    You only get one choice.
    I have 3 Airport Express units and this is just the way Apple has it setup for the iPod Touch.
    You should be able to choose all 3 on your Mac.
    Look at the bottom right of your iTunes window and you should be able to choose multiple speakers.

  • Just got 5s, where is icon to play music on Air Port Express?  did with iphone4s before

    Just got Iphone 5s, where is icon to play music on AIr Port Express?  Did with iphone4s before

    In iOS 7, go the the Home screen (tap the Home button) and swipe up from the bottom to reveal the AirPlay icon.

  • HT4667 why can't i get the download to install on my macbook pro for the air port express

    why can't i get the download to install on my macbook pro for the air port express ? 

    If you are running OS X 10.7.2 then you will be able to use AirPort Utility 5.6.
    Leopard, Snow Leopard: AirPort Utility 5.5.3.
    Tiger: AirPort Utility 5.3.2
    Panther: AirPort 4.2

  • Air Port Express Configuration

    Hi   I am sure that this is a dumb question but hopefully someone will be able to assist me.
    At my home I have three Air Port Express adaptors  - one as a base station, the others as repeaters to extend the range of the signal.  These have been configured to use the IP range 10.0.0.x and have been working OK.    The base station adaptor is both connected via a ethernet cable to my ADSL router, and is set to manage DHCP.
    Over the weekend I have occasion to look at the settings for my ADSL router, I am about to repace it and wanted to get all the settings for the new router. 
    I noticed that I have, as expected a dedicated IP address from my ISP, but that the internal IP range of the ADSL router was set to 192.168.0.x range. 
    Surely this is wrong, and it should be set to the same range as my Air Port Express units shouldn't it, and if so I am not quite sure how the network has worked all this time.
    Many thanks for any assistance
    A

    I noticed that I have, as expected a dedicated IP address from my ISP, but that the internal IP range of the ADSL router was set to 192.168.0.x range.
    Surely this is wrong, and it should be set to the same range as my Air Port Express units shouldn't it, and if so I am not quite sure how the network has worked all this time.
    In your current network configuration, you have two routers in series, each with their DHCP server service enabled. Most non-Apple routers typically provide DHCP clients with IP addresses in the 192.168.n.n range and is exactly what your current ADSL router is doing.
    Since you have the first AirPort Express Base Station (AX) directly connected to this ADSL router, it will receive an IP address on its WAN port in this 192.1689.n.n range, but since it too has DHCP server service active, any wireless clients connected to it would receive IP address in the 10.0.n.n range.
    You would also have a "double NAT" condition. In itself this is not necessarily a bad thing, but does tend to introduce other issues, especially if you wish to share resources between clients connected to either router. In most cases, where you have routers in series, you would want to reconfigure the downstream router as a bridge.

Maybe you are looking for