Add Airport extreme to Time Capsule to boost Wifi

We currently use Time Capsule for Wifi throughout our house with one exception. Our family room is on the other side of a brick wall. We have an old Airport extreme and was wondering if we could somehow add it to the network to boost the wifi into the family room. Thanks.

Hello williards. Welcome to the Apple Discussions!
It is possible, but there are at least two things to consider before doing so:
1) Mixing "n" and "g" AirPorts will only allow you to extend the wireless range in a static WDS. This means two things: The overall bandwidth (speed) will be cut in half, and the other is that this type of WDS can only operate in the 802.11g mode ... effectively, eliminating the advantage of "n."
2) In order to extend the network wirelessly, the extending AirPort must have a sufficient signal from the AirPort it is extending. If wireless devices in the family room cannot get a good signal the old AirPort Extreme won't either and you will not be happy with the performance of the WDS.
A few options would be:
1) Connect the AirPorts via Ethernet.
2) If Ethernet is not possible, consider employing Powerline adapters. These adapter take advantage of your home's electrical circuit to create a hybrid Ethernet circuit between adapters. Note: It is important that the two adapters are on the same electrical circuit.

Similar Messages

  • How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

    How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?  I have an ISP provided wireless Router that has to remain as the base station.  I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

    One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

  • How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

    I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer.  So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only.  How to I make the connections?

    Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC.  I've had the Airport Extreme for a year or so.  The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems.  I was expecting the same with the TC.  But the instruction that came with TC say to connect the printer to the TC via USB...which I did.  And the print function worked perfectly but nothing else.  In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else.  I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way.  But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems.  I may try that again...and see if I can get all print functions with just the TC connected
    As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this.  Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
    Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
    After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup.  I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart.  But now I find that the connection only lasts for a short time.  If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
    So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
    So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct?  Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
    Thanks...

  • How can I tell if my computer (2x2.26 Quad Core Xeon MAC Pro) and my Airport Base station(Airport Extreme 1Tb Time Capsule) are Gigabit compatible?

    How can I tell if my computer (2x2.26 Quad Core Xeon
    c Pro) and my Airport Base station(Airport Extreme 1Tb Time Capsule) are Gigabit compatible?  I want to add a Cisco switch to the network.
    Thansk
    Tony Breuer

    All Mac Pro's ever made have shipped with gigabit ethernet.  The last non-gigabit tower desktop Apple made was the very first generation PowerMac G4's back in 1999.
    Similarly, all Time Capsules have been gigabit ethernet as well - never been one that was not.

  • What is the best long range wireless router, airport extreme or time capsule? Or?

    I need a wireless router that will reach 350--400 feet with a strong enough signal to use Netflix. This will be line of site in a rural area reaching from one trailer to another. Both trailers run on 12volt solar systems but trailer A has an inverter to convert to 120volts for a wireless router. Trailer B only has 12volt power so the Internet signal must come exclusively from the wireless router in Trailer A. There is no electricity available for booster wireless routers in between the two trailers.
    We don't need all of the bells and whistles like being able to connect to printers etc. This is just about sending out a strong enough signal to watch Netflix. Which is more powerful for this purpose? Airport Extreme or Time Capsule? If neither of those is strong enough, what is?
    Thanks,
    SV

    The issue you are really facing is the long distance (at the WiFi frequencies) you have to travel.  The Extreme has a radiated power of 23 dBm, nominal, which can reach 50-150 feet depending on you you are talking to...and that is measured in a closed test chamber at ideal air temperature and humidity, no obstructions.  In the real world that signal will be attenuated significantly just by the air alone, assuming completely obstacle free path, and subject to interference from other sources in the area, such as cell phones and cordless phones, and microwave ovens.
    The AirPort units have enclosed antennas that cannot be connected with an external gain antenna.  So you are stuck with what is in the box.
    Other products, commercial, do use external antennas so you may want to do some research in that area.
    Keep in mind that the 802.11n protocol uses two frequency bands, 2.4 GHz and 5 GHz.  Signal attenuation increases rapidly as a function of frequency.  You will get much less distance if you use the 5 GHz band, so it would be best to restrict operation to 2.4 GHz.
    Now, another aspect, at 2.4 GHz you are in the Ultra High Frequency portion of the spectrum...exposure to radio frequency energy at high power should not be considered a safe or desirable thing in the UHF range.  Most communication specialialists try to minimize exposure at these frequencies.  The reason for saying this is you will need significantly greater radiated power than the Extreme can deliver to reach 400 feet.  You might want to do some searches on health effects of the RF energy you will be transmitting.
    So, bottom-line, I have difficulty encouraging using wireless tranmission at the WiFi frequencies for the distance you need.

  • My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

    My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
    I am running OS 10.7.5
    Both the TC and AE are updated to 7.6.1
    The Seagate drive in formatted: Journaled HFS+
    I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
    "Next"

    It sounds like you may be confusing "mount" with "recognize".
    Connect the drive to the USB port on the AirPort Extreme
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Edit
    Click the Disks tab
    Does the AirPort Extreme "recognize" your hard drive?  If yes, it will be displayed in the window.
    See example below of a WD 500 GB drive connected to the AirPort Extreme.
    If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply.  The USB port on the AirPort Extreme and Time Capsule is under powered.
    Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Connecting to Airport Extreme w/ Time Capsule

    How can I connect a MacBook Pro to an Airport Extreme w/ Time Capsule?
    The computer does not have an ethernet connection.
    I would like to perform the first backup to Time Capsule with the computer physically connect to the Airport Extreme.

    You'll need Thunderbolt to Gigabit Ethernet Adapter - Apple Store (U.S.)

  • Cisco router RVS4000 with Airport extrem and Time capsule.

    Problem droping connection to internet when is Time capsule in extended wifi mode. When I turn off wifi on time capsule Airport extreme work fine.
    Airport extreme and Time capsule is conected via ETH.
    Any idea ?
    Thaks
    B.

    If you use ethernet to connect the AE and TC .. you must NOT extend wifi.. you use Create a wireless network. And setup with same name and security. You are using roaming network.. not extended wireless.. if you want to use extended wireless no ethernet
    see http://support.apple.com/kb/HT4260

  • Replacing older airport extreme with time capsule

    I am thinking of replacing my airport extreme with time capsule. I had a lot of problems setting up airport extreme a few years ago - now it is very reliable. I don't want to have the same issues with time capsule. Can I simply physically replace the airport extreme with time capsule using the same settings as previously
    Advice gratefully anticipated

    Welcome to the discussion area, pancuronium!
    You will use AirPort Utility on your Mac for this operation:
    (Macintosh HD > Applications > Utilities > AirPort Utility)
    Open AirPort Utility and click Manual Setup
    Click the File menu at the upper left corner of the screen near the Apple icon
    Click Export Configuration File
    Assign a name to the file and save it to a convenient location like the desktop
    When you are ready to install the Time Capsule....
    Open AirPort Utility and click Manual Setup
    Click the File Menu
    Select Import Configuration File
    Navigate to locate the file that you exported to import all the settings into a new configuration for the Time Capsule
    Message was edited by: Bob Timmons

  • Iphone printing via airport express, airport extreme or time capsule

    I see lots of info about air print. What I don't understand is why I cannot print something from my iphone via an airport express or time capsule connected printer.  Makes no sense.  What is the workaround here?  Is the only solution to buy an air print enabled printer?
    My current setup is time capsule--2 iphones, 2 Macbook Pros, 1 ipad. One airport express (extending the network of my TC) . The airport express has my printer connected to it.
    What the heck?  Couldnt Steve fix this before he went to the light?

    Hi,
    From my own experience - iPhone 3GS X2, iPad 2 all running iOS 4.3.5 to a MacMini running Snow Leopard 10.6.7 - AirPrint Activator works like a charm. It's awesome. But my shiny new iPhone 4S ( running iOS 5 ) refuses to see any printers. I have reinstalled AirPrint Acitvator ( as per their web site ), to no avail. I have tried connecting my printers directly to my AirPort Extreme to see if my 4S would see a network printer. But no joy. DONT UPGRADE TO iOS 5 if printing is important to you!!
    Steve

  • On a network with multiple airports (extreme, express, + time capsule), do they all have to be "guest" capable devices in order to offer guest networking?

    Here's the situation: I have three older devices:
    a1254 Time Capsule
    a1134 airport extreme
    a1264 express
    none of these support guest networking, according to Apple. If I add a newer Extreme (3rd gen or higher) that support guest networks, will that be possible to offer to guests within range of the Extreme, -OR- do I have to upgrade my entire network of Apple wifi devices? Help appreciated, esp if you have such a setup. thanks!

    The problem here is guest network only works if the Apple Router is indeed the main router.. you cannot setup guest network on a bridged router. Although it appears you can, it doesn't actually work.
    You could modify the network setup..
    Use one device dedicated to a secondary guest network. This would actually work better than using guest but you should have some way to prevent access to computers from guest.. that may be easy or hard depending on the modem you are using.

  • Airport Extreme and Time Capsule – A few questions

    Hey guys,
    I have a Belkin Modem/Router with a USB port for storage, but I just found out it only has 10/100 Ethernet, and can only mount 1 hard drive to that storage port. Other than that, it works fine and I am happy with it. Its stated wireless speed is 300mbps, and it supports 802.11n draft 2.0.
    I also just got a Mac, and was considering a Time Capsule for using Time Machine (Or, because am also considering a Drobo, just a straight Airport Extreme).
    So my questions are:
    1. Is there any point in keeping the Belkin to use as my modem if it’s got 10/100 Ethernet ports? Will that make the Time Capsule/APE (And hence the attached drives/devices) perform at the slower speed?
    2. I don’t know if I can just “turn off” the Belkins Router abilities anyway. Assuming I can’t, will having 2 routers on my network even be possible? (Mac’s software is infinitely more user friendly, and I’d want to use it for my network).
    3. Is there a limit to how many Hard Drives I can connect to an Airport Extreme/Time Capsule? (My Belkin can only share one, even via a USB Hub – it only sees the first drive.)
    4. For now, my storage drives are standard HDD’s from WD and Seagate, but I am considering a Drobo (Some form of RAID storage is happening in the next few months, for sure).
    In either case:
    a) Will Airport Extreme recognize my External Hard Drive as a Time Machine Backup Destination? (And as a Drive to store other media)
    b) Will Time Capsule recognize my external hard drive, in addition to itself (Since it’s also a Hard Drive?)
    5. This page: ((http://www.apple.com/airportextreme/features/harddrivesharing.html)  says: “You can set up password-protected accounts for everyone on the network or allow read-only access to certain files and folders.”
    Some folders, I don’t even want to allow read only access to. Can I require a password before they can be viewed, or modified/deleted? (If I go the time capsule rout, I would want to protect the drives attached to it, and probably not the HD on the capsule itself).
    6. Also, the rest of my computers are PC’s, and I was wondering if it’s possible (and safe) to set up time machine to backup to the time capsule for Mac, and allow the other PC’s to backup to it using their version of “Time Machine” too?
    I know this will leave less room for mac and PC backups, but it would free up room on my Drobo / HDD’s
    7. Can Time Machine backup wirelessly to other drives, such as http://shop.nextbyte.com.au/Script/MCH/Products/532195-NextByte-WDBACG0020HCHAES N-WD-My-Book-Live-2TB
    Thanks so much for your help.
    P.S. Can anyone recommend a good modem to use with the Airprort/Time Capsule?

    No help?

  • Set up advice needed and appreciated Airport Extreme and Time Capsule

    Hi all - bear with me on this
    I have an Airport Extreme attached to my modem in the living room - all is well
    This is attached via the house electrical mains to a Time Capsule in the office - which I use as a back up drive - which is wired to my main computer (iMac).
    All works well - but the range in the back - where the office is - isn't great (i struggle to go wireless in the garden) - would it be improved if I ticked the 'Allow this network to be extended' box?
    I am not 100% certain what this means - what it does and whether i should tinker (by and large the two airports are set up and working as they came out of the box)
    any help is appreciated
    best
    darren, lockerbie,uk

    The second part puzzles me - excuse me (but i honestly don't know) do both units give off a wifi signal of roughly equal 'amounts'?
    Yes. Since both are connected by "Ethernet" each base station is its own wireless network and you have a few options on how best to configure them.
    One of those options is to give both wireless networks the same Network Name (or SSID) so that you can, for example, "walk" a laptop from one to the other and stay connected. This is known as a roaming network.
    If this is something that you don't desire or have a requirement for, then leaving them as two separate wireless networks would work just as well.
    So what i am asking - i guess - is can i increase the distance the wifi signal reaches of the second unit (the time capsule - that is wired to the airport extreme)
    To extend the wireless range of the Time Capsule (TC) you would need another 802.11n AirPort, like the AirPort Express Base Station (AXn). This should get a stronger signal out to the garden. Of course, it would really depend on the distance from the TC to where you would like to place the AXn to get the best results.
    Let me know if you need help configuring the base stations.

  • Airport Extreme and Time Capsule

    Hey guys, I actually posted a few days ago  (https://discussions.apple.com/message/19406166#19406166)  but got no love. I think I've worked out a few of them myself from other sources, but of otherwise, the following remain unanswered. (Just copied and pasted from the above post) If anyone can answer a few questions for me, that'd be great.
    I have a Belkin Modem/Router with a USB port for storage, but I just found out it only has 10/100 Ethernet, and can only mount 1 hard drive to that storage port. Other than that, it works fine and I am happy with it. Its stated wireless speed is 300mbps, and it supports 802.11n draft 2.0.
    I also just got a Mac, and was considering a Time Capsule for using Time Machine (Or, because am also considering a Drobo, just a straight Airport Extreme).
    So my questions are:
    2. I don’t know if I can just “turn off” the Belkins Router abilities anyway. Assuming I can’t, will having 2 routers on my network even be possible? (Mac’s software is infinitely more user friendly, and I’d want to use it for my network).
    4. For now, my storage drives are standard HDD’s from WD and Seagate, but I am considering a Drobo (Some form of RAID storage is happening in the next few months, for sure).
    In either case:
    a) Will Airport Extreme recognize my External Hard Drive as a Time Machine Backup Destination? (And as a Drive to store other media)
    b) Will Time Capsule recognize my external hard drive, in addition to itself (Since it’s also a Hard Drive?)
    5. This page: ((http://www.apple.com/airportextreme/features/harddrivesharing.html)  says: “You can set up password-protected accounts for everyone on the network or allow read-only access to certain files and folders.”
    Some folders, I don’t even want to allow read only access to. Can I require a password before they can be viewed, or modified/deleted? (If I go the time capsule rout, I would want to protect the drives attached to it, and probably not the HD on the capsule itself).
    7. Can Time Machine backup wirelessly to other drives, such as http://shop.nextbyte.com.au/Script/MCH/Products/532195-NextByte-WDBACG0020HCHAES N-WD-My-Book-Live-2TB
    Thanks so much for your help.
    P.S. Can anyone recommend a good modem to use with the Airprort/Time Capsule?

    Ok, thanks for clarifying.
    Unfortunately, the "jury is still out" on this. Apple's last stance (ref: Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks) is that Time Machine (TM) does not support backups to AirPort Disk drives. However, others (ref: Time Machine now works with AirPort Extreme's AirDisk feature) have reported that this is now working with firmware v7.3.1 or later.

Maybe you are looking for