Add alarm in LMS 4.0

Hi,
I would like add an alarm to LMS when a power supply of some device goes down. For instance, when the power supply fails LMS send an email or something like that. How can do it?
Thanks in advance

Hi,
Go to Admin > Network > Notification and Action Settings > Fault Notification Customization, and check the boxes for StateNotNormal and OutOfRange. Then configure a Notification Group for that Event Set. That should provide you notifications for events relating to failing hardware such as Power supply, but it will also capture things relating to high temperatures as well.
I hope this will help..
Thanks
Afroj

Similar Messages

How delete Songs in Clock Add Alarm Sound?

In ios 7 under Clock<Add Alarm<Sound, there's a section at the top named 'Songs,' which I don't recall seeing before. There are 3 songs there from my iTunes, and I don't recall ever adding them there. How do I delete them? There's no Edit button there, and the songs are not listed under General Settings<Sound<Ringtones.
Thank you,
William

I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
Thank you very much!
Regarding the Alarmed app, doesn't it have to be running to actually remind you?
-Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

Add alarms to accepted ics invites in iCal?

I found several discussions regarding editing .ics invitations in iCal but all were several years old. Here's hoping that there is something more recent.
Most of the time, I simply want to add an alarm to the invited event. I cannot: drag the event to the desktop, as suggested in one answer, because "only the organizer can edit this event"; duplicate the event without sending notifications to everyone else invited; and of course, there is no 'edit' button available.
Is there any solution out there that is quicker and simpler than creating a dummy event for just adding a separate alarm?

Hi John,
I never expected to get the developer on here!
Here's how I've got it set up...
General tab
I've got the Sync Address Book dates to iCal checked.
For Birthday events and Anniversary events I've got the text "Birthdays and Anniversaries" so that they both go into the same calendar.
I've left only sync for group blank as I want it for all.
Titles tab
For both Birthday and Anniversary I've got the the same fields, set to...
First name | Last name | : | type | age
Alarms tab
In this tab I've got
Email: 5 days before at 08:00 ticked for Birthdays and Anniversaries
Message: 4 days before at 10:00 ticked for Birthdays and Anniversaries
I've got no other alarms set.
I've got the email set to my personal email address.
The path for the alarms to my Home folder
Sound for alarms as Basso
When I then close Dates 2 iCal it creates the events in iCal, but not the alarms.
One further query, I've just done a reinstall of my system and since reinstalling Dates 2 iCal the Buy/Register button is greyed out, so I'm unable to reregister it, I purchased it a good while back as I've found it a really useful tool.
Many thanks
Steve

Cisco Prime modify/add alarm categories

Hello all,
I'm using prime to manage the failed authentication attempts for a 802.1x environment. I changed the notification severity level to Major so that it would show up in alarms. However, i realized that the alarm category is listed as client and in E-mail notifications for alarms the "Client" category is not listed. Can i modify the list to include the client category ?

Hi,
Same problem here.
I am using Cisco Prime Infrastructure 2.0 (evaluation version for 60 days). I want to deploy port monitoring for my trunk ports between switches and some other important ports e.g. servers. Basically I want to get alarms when these ports are down, there are errors on ports and etc.
So in Design>Port Grouping I created User Defined group with important ports. In Deploy>Monitoring Deployment I selected Interface Health (default)>Deploy selected Port Groups and when selected port group I created.
Now the rule shows Deployed: Yes and Status: Active. After that I just pulled out one port which was in monitored group, waited 5min as it is set in Interface Health (default) template, and nothing happened, and worse, alarms started to show up of other ports where regular users are connected (computers was turned off), which I do not want to see at all. I tried redeploy template, I even created my own template but still no desired result.
Any suggestions how to make port monitoring work?

Add alarms to multiple events

Hi,
I've imported a number of events into my iCal calendar for anniversaries and birthdays, using Dates to iCal 2. This is supposed to set up alarms when selected, which I did. However, it didn't set up the alarms.
As I've got probably over 100 events which I want to have alarms on I don't want to go in to each event individually to set them up if at all possible. I'd really like to shortcut this if at all possible as all of the alarms will be set to the same time frames, ie 5 days before - send email. 4 days before - pop up message.
Is there a way to set the alarm for multiple events at once, be it in iCal, through Automator or AppleScript for example?
Many thanks

Hi John,
I never expected to get the developer on here!
Here's how I've got it set up...
General tab
I've got the Sync Address Book dates to iCal checked.
For Birthday events and Anniversary events I've got the text "Birthdays and Anniversaries" so that they both go into the same calendar.
I've left only sync for group blank as I want it for all.
Titles tab
For both Birthday and Anniversary I've got the the same fields, set to...
First name | Last name | : | type | age
Alarms tab
In this tab I've got
Email: 5 days before at 08:00 ticked for Birthdays and Anniversaries
Message: 4 days before at 10:00 ticked for Birthdays and Anniversaries
I've got no other alarms set.
I've got the email set to my personal email address.
The path for the alarms to my Home folder
Sound for alarms as Basso
When I then close Dates 2 iCal it creates the events in iCal, but not the alarms.
One further query, I've just done a reinstall of my system and since reinstalling Dates 2 iCal the Buy/Register button is greyed out, so I'm unable to reregister it, I purchased it a good while back as I've found it a really useful tool.
Many thanks
Steve

LMS --Auto Script to Add devices

Hello Experts,
I am new to LMS
Is there any script which can add devices in LMS (v3.2) in one go.
I have large number of devices which needs to add & everyone has different set of snmp string.
Also can you advise url which can give information about various jobs which can set using LMS
I may need for jobs.
1.       Daily backup
2.       Auto –write on devices on weekly basis
3.       Memory / CPU / Link utilization alerts
4.       Interface error alerts
5.       BGP session alerts
Regards
Yogesh

LMS supports a bulk import feature from CSV or XML under Common Services > Device and Credentials > Device Management. This might be easiest for you. You can do an export first to see the file format, or you can consult on the context sensitive online help in the Device Management screen.
You can also script individual device additions using the NMSROOT/bin/dcrcli utility. This utility is documented in the Common Services online help within LMS.

Upgrading to LMS 4.0.1

After the installation LMS 4.0 I make Upgrading on LMS4.0.1. The process remains stand with the message "File Copy in progress..." during several hours. After the Reboot of the server it points me Cisco Works again with LMS 4.0 starts.
OS Version: Windows 2008 R2

Hi
Does any one know how to setup the Lms 4.0 i have loaded LMS 4.0 and also configured all basic settings, i am able to figure out how to add the device and check the verison treee etc,,
after adding the device and try to veiw the device the below error message getting.,,
The device is not available in the device credentials repository or you are not authorized to view the device details.
i am using admin account to do this job.
can some one help me on how to add device into lms 4.0 and check the config .
SS

Can't set an alarm

I can't set an alarm in ical. When I go to the 'Alarm' option it is light grey and the drop down says either add alarm or remove alarm. There is no email address or other alarm option. My home card in address book is fillled out correctly.

Brian,
Do you have an event of to do selected, from an editable calendar (vs a subscribed to calendar or the birthday calendar)?

LMS 4.1 Credential Verification Report

Hi,
when running Credential Verification Report, I get following notification: "None of the devices have credential verification data".
I have made different Default Device Credential sets that I'm using when I add devices to LMS. I been looking at the forums here, but I could not see wether this is bug in LMS 4.1 or if I have to do this a different way?
Regards,

I'd suggest doublechecking your work by following the "Update the credentials" procedure on page 8 of this handy intro guide posted in the documents section of this forum.
Hope this helps.

Creating plug in for LMS

Hi,
1.Can we write plug-ins/ add on to LMS components? If yes please let me know how? any links would be helpful.
2.Does LMS support discovery based on LLDP? If no, can we write our own plugin to take care of device discovery?
Regards,
ram

The EnergyWise "plug-in" for LMS consists of two updates: RME 4.3.1 and HUM 1.2.1. The RME piece is mainly for provisioning while the HUM piece is purely for monitoring.
Once the updates are installed, you will see each application offers features for EnergyWise management (e.g. reports, tasks, pollers, etc.).

How to import .my to LMS 3.2

Hi all,
I need to import a .my file downloaded from Cisco in order to monitor Digital Signage Manager notifications (snmp)
1st .my file is ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-DIGITAL-MEDIA-SYSTEMS-CAPABILITY.my and 2nd one is ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-DIGITAL-MEDIA-SYSTEMS-MIB.my
Thank you

LMS does not provide a general purpose trap receiver into which you can load MIBs. You can, however, load this MIB into the Health and Utilization Monitor add-on to LMS. Just put the file in NMSROOT/hum/mibmanager/mibcompiler/mibs along with the INET-ADDRESS-MIB.my and SNMP-FRAMEWORK.my. Then go to HUM > Admin > Load MIB, and load the CISCO-DIGITAL-MEDIA-SYSTEMS-MIB.my file.
HUM will only allow you to poll objects from this MIB, though. You will still not be able to view notifications (e.g. traps) from these digital signage devices.

Can I chose my alarm tone with Siri?

While I love setting an alarm using Siri, I don't love the default alarm tone. I've noticed that you set the tone of choice when you manually set the alarm. Is there any way to create a new default tone so that alarms set with Siri use that one?

I just went into the clock app, selected alarm at the bottom, then tapped the + symbol on the top right. That takes you to add alarm. I selected sound and choose an alarm tone I liked (one that doesn't cause a heart attack when I am peacefully sleeping). I hit save. It set an alarm for the time I began the process but I just turned that off. After that, whether I set an alarm manually or with siri, the same tone resulted.

Setup Approver List in LMS 3.1

Hi All, Has anyone setup approval feature in LMS3.1. I want it to setup for my customer. Customer wants that helpdesk will create a job and then it should come to Network Manager for approval and without approval job should not be executed.
Can anyone explain me how does it work and what is the requirement to achieve this and what are the step involve in it.

Help desk users typically don't create jobs. This task usually falls to Network Operators. They would create a job, then before the job could run, it would require approval from someone on the approval list. That approver need not have any other access to LMS except to approve jobs (i.e. they would only be given the Approver role). If the job is not approved by the time it is scheduled to run, then it will be canceled.
To setup an approver list, you need to first add users to LMS with the Approver role. Then go to RME > Admin > Approval > Create/Edit Approver Lists, and create a list. You can assign an approver list to a various job-based task under the Assign Approver Lists TOC task. Finally, go to Approval Policies to enable the approver feature for a given job-based task.
I highly recommend you first review the context sensitive online help in RME so that you fully understand the flow of maker (the job creator) and checker (the job approver).

Cannot properly set alarm

My biggest problem with Mail.app (which I want to love) in Leopard is the setting of an alarm in the To-Do section. I make a To-Do, I set its due date and priority and then go to set an alarm. Here's the problem: Every item I change causes the To-Do bubble to disappear. So, for example, I want to set an alarm for Message, 5 days before at 2:15 PM. I click "Add Alarm" and the default values are Message, 15 minutes before at 11:45 am. I go to change the 15, I delete the one and the alarm prompt vanishes. I click the edit button again, and go to change minutes to day, once that is done the bubble disappears. I click the edit again and change AM to PM... disappears, you get the idea. I can fix this by quitting the app and restarting it, but then it happens again when I make a new To-Do. No one has ever been able to confirm/deny this and it drives me nuts! Thank you if you can help me, and I hope to hear from you soon.

I get the same thing. I found this post that should help you:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/87679d43-04d5-4894-b35b-f37a6f5558cb/solved-how-to-take-ownership-and-change-permissions-for-blocked-files-and-folders-in-powershell
Scroll down to one of the last posts, a long one by barnabya, I tested it and it works. Note that you do not have to execute the bits at the very end to take ownership of the file if the account you're using is already the owner, but you DO need to
run all three bits to establish SeBackupPrivilege, SeRestorePrivilege, and SeTakeOwnershipPrivilege before running the get-acl | set-acl command.
I hope this post has helped!

Snooze on Alarm Clock

Is anyone else having issues with the snooze button not working on the stock clock app?
I used to have my alarm set to snooze every five minutes up to 3 times and ever since I got the froyo update, if I hit snooze it doesn't work and go off.
And before anyone says to do a "soft reset" and take out the battery, that does not fix the issue at all.
This froyo update has been more of a pain then helpful!

Sorry for the problems you have experienced with the alarm clock feature of your Fascinate. After some research, I found the following as a fix for the issue:
1. Go to desk clock and then to Alarm tab.
2. Then on Alarm screen click setting button(==)which is next right to home screen, where you get three options Add Alarm,Delete and Settings
3. Click settings, where you can see 4 options.
4. Select Side Button Behavior(Set the desired behavior of the side buttons when pressed during alarm).
5. Once you click that setting you will now get three options A. None(if you click side button during alarm nothing happens) B. Snooze(The alarm will go to snooze if you click any side button during alarm) and C. Dismiss(The alarm will dismiss if you click any side button during alarm).
Choose option B to snooze the alarm.
If this does not solve the problem, please let us know and we will be able to troubleshoot further with you.
Thanks!

Add alarm in LMS 4.0

Similar Messages

Maybe you are looking for