Add an external computer to a test system

currently we are using a PXI-8150B but the applications are too slow due to the low resources, ram, procesor speed,ect

Hi,
You can use an external computer by replacing your PXI-8150B with a MXI-3 controller.
this link should prove helpfull:-
http://sine.ni.com/apps/we/nioc.vp?cid=10359〈=US
hope this helps,
Nick

Similar Messages

Trying to back up to external hard drive (iomega). Instructions say to erase hard drive. Won't entirely erase. Can't enter iomega in Time Machine. Computer is minimac, operating system is OSx 10.6.8.

Trying to back up to external hard drive (iomega). Instructions say to erase hard drive. Won't entirely erase. Can't enter iomega in Time Machine. Computer is minimac, operating system is OSx 10.6.8.

All you need to upgrade the iBook for Tiger is another 128 MBs of RAM. It has both Firewire and USB ports. You do want to upgrade it for what you plan to do. The problem you may continue to have, however, may be due to the fact that the age of the computer is such the disk controller does not support hard drive volumes larger than 128 GBs, which is probably the reason the drive won't mount.
The reason you get DU errors is likely because the drive was formatted using the Intel Tiger version of DU, while you were using the Jaguar version. That's a definite no-no.

Can I add a 21"computer Monitor to an iPad as a peripheral? I would like to create a more permanent larger system when iPad s not in portable use.

Can I add a 21"computer Monitor to an iPad as a peripheral? I would like to create a more permanent larger system when iPad s not in portable use.

Apple sells adapters from either 30-pin or Lightning connectors to either HDMI or VGA. Check them out in the Apple Store at http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks or your national equivalent "iPad Cables & Docks" store page.
Be sure to read the comments on whichever adapter is appropriate to your iPad model and your monitor model. Not every user has found satisfaction using them (though many have).

Data protection in test system.

Hi,
A question that I suppose that most of you have seen before...
We've external developers and consultants that access our SAP development and test systems everyday. Normally they are not allowed to work in our production system due security constraints. The problem is that our test system is an homogeneous copy of our production, so access to the test system is also a security threat.
Is there any way to add enough noise to the test system to not show real data and still be functional ? Of course it must be a repeatable process because we refresh the test database every month.
Is there any solution/software about this ??
Regards,
Joan B. Altadill
CELSA SAP Admin

Hallo Joan
You may want to consider the excellent product DSM/ERP from EPI-USE Systems <i>: Data Sync Manager/ERP is a modular product that enables the transfer and integration of Human Resources, Accounting and Logistics data between R/3 systems within a SAP system landscape</i> : <a href="http://www.epiuse.co.uk/products/datasyncmanagererp">www.epiuse.co.uk/products/datasyncmanagererp</a>
Regards
Jan

Test System Engineer / LabVIEW Developer

As a member of the Nexjen Systems team, the Test System Engineer / LabVIEW Developer performs engineering design, software development and hardware specification for custom test & measurement systems.
Nexjen Systems offers a challenging environment where you can:
Develop your Engineering, Design and Software Development skills.
Refine your communication skills through direct client interaction.
Take responsibility for highly technical projects, with mentoring from experienced engineers.
Add significant value to clients’ product development and engineering efforts.
Nexjen Systems is a premier integrator of LabVIEW-based, automated test & measurement systems. We pride ourselves on providing a very high level of technical value to our clients through a range of services focused on test system engineering, construction and deployment. Nexjen Systems is located in Charlotte, our clients are located around the world. Learn more at www.nexjen.com .
Position Requirements
Engineering Degree (Electrical, Computer or Mechanical preferably).
3-5 Years LabVIEW and/or TestStand Development Experience.
3-5 Years Automated Test Equipment Design or Test Engineering Experience.
Desire to grow as an Engineer/Developer in a challenging technical environment.
PLEASE EMAIL RESUME' TO [email protected]

It would appear at their headquarters in Charlotte, North Carolina, USA
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

SCCM 2012 R2 - Add new AD Computer

Hey there,
i am pretty new in the SCCM World. I currently try to discover new created Computer Objects in the AD to the SCCM - the SCCM find the new Computer Object during the discovery but will not add it as an Device. I also got an Error Message:
ERROR: System TEST-SYSTEM is a unsupported operating system, unsupported version, or malformed AD entry. Reported system type is: ().
Before I see that the Property Operating System, OperatingSystemVersion and dNSHostName is not set - what is clear because it is a brand new created.
But i need the Object to make it available in the Collection and Terminate what Programs will be installed in the Deployment Task sequence.
Is there a way to discover brand new AD Computer Objects to the SCCM Database without having that Properties set?
Regards,
Daniel

Thanks for your replay Torsten - but how the Unkown Computer knows what Operating System needs to be deployed?
On my installation that will be done by membership in some Device Collections. The Membership on Device Collections will be based on the Distinguished Name of the AD Object. So without AD Object - if i understood the structure of SCCM correct - no Membership
in my Device Collections and therefore no decision what operating System will be installed.
Or will the SCCM check before if an AD Object is already created and create then a Device in my Device Collections?
Thank a lot
Daniel

How do I add a new computer to the canning fuction on my

How do I add a new computer to the scanning function on my PIXMA MX870? I can send print jobs to it from the new computer, but it tells me to "Set the PC to start scanning" when I try to scan to it. The old computer still accepts scanned images when it is turned on.

Hi, Illiniboy67!
So that the Community can help you better, we will need to know exactly which operating system is running on the computer you're trying to connect to the scanner, and how it's connected (USB, ethernet, or wi-fi). That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

The internal hard drive on my early 2009 24" iMac is nearly full. How do I add an external drive so that it functions just like the internal drive on the iMac?

The internal hard drive on my early 2009 24" iMac is nearly full. I have already worked to free as much space on the HD as possible. How do I add an external HD and have the iMac read it as though it was part of the internal HD. I know about external HD for additional storage and I do have an external HD, but, it is so much easier to search the drive when it is internal than having to perform a search on the internal drive and then a search on the external drives. And, it is easier to save files to an internal drive so that I don't have to decide which external drive to use to save files. In other words, I want to add an external HD and have it function as though I had purchased a larger internal HD.

That is simply not possible. Every drive is a separate device. It cannot be used to extend an internal drive as though you had a seamlessly larger drive.
What you can do is to create a striped RAID array using the internal drive and an external drive. However, doing this will erase the internal drive and you will lose everything on the internal drive. Furthermore, installing Lion or Mountain Lion becomes a bit of a problem because you cannot create a Recovery HD on a RAID and this tends to make the installer choke. However, you can clone an existing Lion or Mountain Lion system to the RAID and designate the RAID as a startup volume.
I would not recommend the RAID solution, personally, but there are many who do. I prefer the basic solution of spending the money on a larger internal hard drive instead of an external hard drive.
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server: Hardware and Service Comparison.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons. Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

I have a TC for my backups but now I want to add an external hard drive

I have a TC for my backups but now I want to add an external hard drive to my TC and share what is on it within my own network. I can see the hard drive from airport Configurator but I cant acces it. What should i do?

Hard drive getting full or near full?
Here are some of my tips for deleting or archiving data off of your internal hard drive.
Do a search for and downlaod and install OmniDisk Sweeper and OnyX.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive older emails you want to save to disc, Flash drive/s or to ext. hard drive.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, Flash drive or ext. hard drive and/or delete any old documents you no longer use or immediately need.
Uninstall apps that you no longer use. If the app has a dedicated uninstaller, use it to completely uninstall the app. If the app has no uninstaller, then just drag it to the OS X Trash icon and empty the Trash.
Also, if you save old downloaded .dmg application installer files, you can either archive and delete these or just delete the ones you think you'll never install, again.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its thing initially, then go to the cleaning and maintenance tabs and run all of the processes in the tabs. Let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
If you have any other large folders of personal data or projects, these should be thinned out, moved, also, to the external hard drive and then either archived to disc, Flash drive or ext. hard drive and/or deleted off your internal hard drive.
Good Luck!

How do i add an external hard drive to my network

how do i add an external hard drive to my network

If your external HDD has a USB interface and is formatted in either HFS+ or FAT32, you can connect it directly to the USB port on your 802.11n AirPort Extreme Base Station (AEBSn). You would then use the AirPort Utility to configure the AEBSn to share out the HDD over the network.
Please see the following Apple Support article on how to mount the HDD on your computer.

Strange problem in report Execution in test system

Hi,
As something strange going on my program in test system.
1) Executing the program in Development system using SE38->program name->F8. the program executes and display selection screen fraction of seconds.
issue:
When i am doing same process in TEST System(using SE38->program name->F8) the execution process is min 1 or 2 min , then i am gettign the Selection screen.
I have checked other programs in TEST System but it doesnu2019t happen to any other programs on TEST system.
Program functionality--
i am using 2 table and MARA and Z table, Using Selection screen i am extracting the data into output screen and excel download
Dispaly
1)if user select the Radio button output to screen in selection screen
Display data into screen using some color formatted
2)if user select the Radio button output to file in selection screen
I am using OLE Automation Controller to get the Output excel download some color formatted data
please let me know how to rsolve this type of isssue in Test system...
plz respond when you find the time.
Regards,
AS
Moderator Message: Urgency downgraded.
Edited by: kishan P on Apr 13, 2011 11:59 AM

Yes ..
INITIALIZATION. Event i have written code like free the objects ans clear Work Area and Refresh the Internal tables
And
*-to highlight the comments on selection-screen
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'RM1'.
      SCREEN-INTENSIFIED = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Add entries to get the search help values
PERFORM SEARCHELP_REGION.
PERFORM SEARCHELP_COUNTRY.
At selection screen event i am getting the search help for the region and country
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_REGN-LOW.
*Search help for Region
PERFORM SEARCHHELP_REGN_F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CTRY-LOW.
*Search help for Country
   PERFORM SEARCHHELP_CTRY_F4.
using FM :*FM for F4 help for returning the value to be displayed
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
Please let me know is it couse problem in TEST System....
so how to resolve the issue...
Regards,
SR

How do CVI7.0 runtime engine and TestStand3.0 runtime engine work in a test system?

I developed code modules from CVI 7.0, and test sequence from TestStand 3.0. Now I want to deploy all to a test system. Should I create distribution kits for CVI and TestStand, and install to a target PC? Do each kit include the RTE? How do the runtime engine work in a system?

hp7550,
I saw your post earlier entitled "what is a run-time engine?". It looks like this post is addressing the same issue.
To answer your questions, it is not necessary to create a distribution kit for your CVI code modules. You can simply install the CVI Run-time Engine, which you can find if you go to www.ni.com and click on the Drivers and Updates link on the left-hand side.
Then you will need to deploy your TestStand system using Tools >> Deploy TestStand System in the Sequence Editor. That tool will go out and gather all the CVI code modules your sequence calls - unless you are calling a DLL or something dynamically inside of a code module; in which case, you need to add that dynamically called DLL (or code module) to your TestStand workspace.
To install the TestStand Run-time Engine, make sure the Install TestStand Engine option is checked on the Installer Options tab of the deployment utility. You can customize what gets installed with the engine by clicking on the Engine Options.
For more information on deployment, see Chapter 14 of the TestStand Reference manual (Help >> Search the TestStand Bookshelf...).
To answer your last question a run-time engine simply gives you access to the compiled code that corresponds to the functions you used from the CVI or TestStand libraries during development.
I hope that helps.
Best Regards,
Matt P.
Applications Engineer
National Instruments

Exit Fm is not to CMOD project but transported to test system

Hi.
I have a enhancement MWMIDO08 with contains function module EXIT_SAPLLMDE_002 and which incldes program ZXLIDU10.
I made my necessary changes in the include program and transported to test system, without creating any CMOD project.
But my changes are working fine in test test.
Can you please suggest me, what to do now? if i want create a CMOD project now and add the function exit into it. and resend the new request to test system.
Does it create any problem.

This sort of thing can happen if someone has assigned a CMOD project to the enhancement containing the user exit before.
First check in SE16, table MODACT with MODACT-MEMBER = 'MWMIDO08', then MODACT-NAME will give you the existing project that is already assigned to enhancement MWMIDO08
If there is no entry in MODACT then you can safely create another project and assign the enhancement to it, activate and transport.
If already there is an entry in MODACT, you need to check if the same entry exists in your QA and Prod systems, to verify if someone already transported it. If it is not transported you need to deactivate / activate the project and transport that project again.
No this should not cause any problem and I can tell from experience having done same thing before.
Best regards,
Vishnu Tallapragada

How to instal/set UWL in order to test WF functionality also on test system

I am replacing colleague who is on hollydays.
I am pritty new in EP area. We have integrated ESS functionality with some approval workflows.
WF guy told me I have to maintain the UWL on test system as this one can not communicate with test backend system.
So far I created iviews with SAP transactions(and one with URL), page workset and a test role on an brand new system enironment consisting of an ides ecc on an freshly installed EP system.
On old test EP I am very confused (maybe because of ESS package). Other confusing thing is that on this EP system I can not add e.g an i.view(there I can not as "No templates to display. You are not assigned to any existing templates.").
So my question would be :
1.How to instal/set UWL (so that workflows can be tested on test environment i.e. old test system with ESS package in connection with backend
2.How could I get reed of "No templates to display. You are not assigned to any existing templates." message(espetially if this has any impact on qustion 1.)
Thank you in advance for your imout

few settings in java were wrong

Sap test system needed / sap test system gebraucht

Hi,
maybe somebody of you could give some hint where I can find a test system for sap in a downloadable version 4.5 upwards. I have an sap mini basis system (mbs) in the version 4.6 (c) , but no valid license key on hand due to the fact that the old one has expired and there would not be any new license key available from sap company itself because of already having done the steps up to the latest version.
If somebody could also advise where to find sap test versions in between 4.5/4.6 and the latest it would fantastic to get to know - I need an test environment for abap programming in the first place.
Thanks in advance to you...!
Best regards and wishes !!!
Hallo,
vielleicht gibt es jemand, der mir sagen kann wie oder wo ich ein Testsystem für die ABAP-Entwicklung bekommen kann.
Ich habe für Windows bereits ein MiniSAP-System in der Version 4.6 (c), bei der der Lizenzkey aber nicht mehr funktioniert, da abgelaufen.
Falls mir jemand einen Lizenzkey für diese Version zur Verfügung stellen kann, wäre mir vorerst sehr damit geholfen.
Aber nichtsdestotrotz würde mich eine neuere Test-Version von SAP sehr interessieren. Falls mir jemand hiervon eine Kopie geben kann oder einen Hinweis darüber wo gebührenfrei oder kostengünstig eine solche zur Verfügung steht oder gestellt wird, wäre ich sehr froh darüber, da sich sicherlich seit 4.6 schon ein wenig geändert haben wird, in Menüs u.a. .
Danke im Voraus für eine Antwort auf meine Frage!!
Viele Grüße!!

Hi again,
during installation the java installation folder needs to be selected. After having chosen this the installation aborts by showing a message with the options retry, view log, stop.
This message is generated:
An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AntiVirSchedulerService' does not exist on the 'localhost' host.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Programme/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
Also some message about my anti-virus software came up saying that there is a problem with with localhost. I have now deinstalled all java from my computer to plainly install the version needed: version jre 1.4.2.x, but I can't find this version in the internet, I mean not in the way that it is obviously the right version. Some description says j2se and other more even though I was googleing for jre 1.4.2 download.
Is there anybody who can advise?
Thanks for any hint.
Best regards
Guido
Edited by: Guido Messer on Aug 5, 2009 3:31 PM

Add an external computer to a test system

Similar Messages

Maybe you are looking for