Add an in-line notes panel and some kind of notification.

It would improve our workflow if my designer could see In-line notes as they are added to the document, and get some sort of pop-up notification when a new in-line note is added. Our current process is to have the designer search through the document periodically and is in-efficient. We used a plug-in for CS4 that was provided by a vendor, but they have not updated for CS5 yet.

sorry the site's Ui was really laggy that day
I found this cool chrome extension called Cisco Dialer.
It works wonderfully with a simple setup (just put in the phone's IP address) hover over a gmail contact's number and a little phone pops up on the right hand side - click it and it automatically dials it through your cisco phone. I just wish this extension was chrome wide, not just for gmail contacts.

Similar Messages

Some of my songs from iTunes are AAC (m4a not protected) and some are AAC (m4p Protected). Why is this???

Some of my songs from iTunes are AAC (m4a not protected) and some are AAC (m4p Protected). Why is this???
Any insights would be much appreciated.

Because you purchased some of the songs when they were sold as DRM ( protected ) - pre itunes plus, and you bought some of the songs when they were sold as non-drm - itunes plus.
You can check quick links in the itunes store to see if you have itunes plus upgrades available for purchases.

Finger sensor not working and some time iphone 6 screen also hang/pause for few seconds

In my iphone6 finger sensor not working and some time iphone 6 screen also hang/pause for few seconds.

Try cleaning the sensor, remove all fingerprints from the settings, and the start over in recognizing prints. There are a number of things that make prints hard to read, sweat, lotion, dirty hands, etc.

Why do some users see a document information panel and some do not?

I asked this in the MS Office forum and haven't received an answer that explains why some users can see the data some cannot.
We have customers that connect to our online multitenant SharePoint application. They use MS Office 2010. Some of the users can see the actual document properties metadata in the Excel application and some can not. All the users see the DIP, it just
some of them do not see the data. If they go into the document properties of the documents in the library they can see the data, just not in Excel. Why would some users be able to see the data in the DIP and others cannot?
Thanks,
Paul
Paul

Check ipermission difference for these users. If permissions are same then check exact office versions (including any hotfix, patch) of these users
Update us with your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

When I open fire fox and open uther lings I'm geting masage that fire fox is not resonding and some time loads after a while and some time not.

When I open fire fox and start opening tabs it tell me that fire fox is not responding and after a while some time will open and some time not. What can I do to correct this. If I need to reload the fire fox let me know how I don't wont to loose all my book marks. Thank you for your help.

Try to update to Firefox 24 (just been released).
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Apps not showing and some not opening.

using a torch 9800, upgraded my app world and it disappeared but when i want to download snother one it says its alresdy there, have tryd to replace but still doesnt show. and some apps dnt open they jst say " error loading module, application cnt load too many apps running"... help on what to do or i should jst get a new handset.

Hello daliwillz,
Welcome to the forums.
Have a look at this article which may help you with your issue.
BlackBerry App World icon is missing
Hope this helps. Have a good day.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

SPA 303 and some kind of Click to Call?

I recently purchased the a single SPA 303 configured to an anveo.com acount - no thrills just one line easy setup for my home office.
I was trying to find some kind of solution so I could click on a phone number on the web and it would automatically dial out from my SPA 303.
Hopefully there's just some program I can install on my computer that can communicate with the SPA 303 without the need for a server.
I saw some stuff regarding CUCME but that seems like an overkill for what I'm trying to do. Also saw some stuff like Call Ctrl which has vanished from the internet (company went bust?).
some users on dslreports forums recommended a script which performs something akin to anveo web call, which places the call to the destination and then to my SPA phone - but frankly that's not what I want.
Thanks in advance!

sorry the site's Ui was really laggy that day
I found this cool chrome extension called Cisco Dialer.
It works wonderfully with a simple setup (just put in the phone's IP address) hover over a gmail contact's number and a little phone pops up on the right hand side - click it and it automatically dials it through your cisco phone. I just wish this extension was chrome wide, not just for gmail contacts.

N8 and some kind of debug

Hi, i was trying to reboot my phone because it was not responding. After using some times the lock/unlock button at the phone side i tried to keep hold the upper button for some seconds, the phone has done some vibration and nothing it seemed to be happened. When i rebooted the phone i seen some new blu number in the upper right corner of the phone. I think to have activated some kind of debug and now i'm not able to disable it, how can i remove these numbers from the display? In the attachment a picture where is possible to see these blu numbers, i've made a red circle around them.
Attachments:
CIMG0002.jpg ‏185 KB

If you are sure that it started with some change in settings ( keying of buttons..) and nothing else, then try a Factory Reset..
Refer Pg. 111 of the User Guide..
http://nds1.nokia.com/phones/files/guides/Nokia_N8-00_UG_en.pdf
Just for safety.. back-up your data before going for it..

How can I remove version 3.5 from my computer... the add/remove programs will not work, I have 3.6 installed and 3.5 is taking up over 2 gigabytes of disk space according to the add/remove in the control panel and nothing I do will remove 3.5

I have been trying to make room on my C drive and have been removing stuff I don't use. I have version 3.6 Firefox but my settings show I also have 3.5 which shows over 2,000 megabytes of disc space being used. I try to remove it but nothing happens, nor can I find it when searching "my computer" to try and kill it. Why would any program use up 2 gig of space?
== This happened ==
Every time Firefox opened
== I was trying to find a way to clear up space on my C drive

If you need to consider removing 30MB folders to create space then I imagine your hdd is seriously short of space. Normally I think it is often suggested a minimum of 20-25% free space be left on a Windows machine hdd. How much free space % wise have you at present.
You probably have already thought of these, a lack of space could slow things down and may even contribute to crash problems.
*Not using the Hibernate feature will release one largish chunk.
*Not keeping video files on the HDD unnecessarily is also likely to save space.

How to add selection tool? (NOT selection-and-text-edit tool)

I need to add the selection tool to my Acrobat XI interface.
The icon for this tool is an arrow.
I do NOT want the tool whose icon is an arrow along with a text-edit cursor. I already have that, and it doesn't serve all my selection needs. For example, I can't use it to "window" to select several objects at once.
How can I add this tool to my toolbars / to my interface?

The problem with this is that the tool doesn't appear in the tools pane. I can't find the tool anywhere, but I know that it exists, because at some point I did somehow manage to see it either in the tools pane or in the Quick Tools area. It does exist in Acrobat XI, right? If so, please tell me how to find it.

Imac G3 clock not working - and some other questions

This iMac is starting to act slow, especially browsing with FireFox. Also, the clock will not hold its time. Won't browse at all with IE or Safari. Well, Safari will sorta work - but for some reason automatically downloads FAD messages on desktop.
Does this computer just need a new battery for the clock? Also, will that battery also improve the general sluggishness?
What battery does it need and how can I replace it?
Also, regarding browsing - there are less and less browsers that work with this computer. I'd like to upgrade (currently using 10.2.8) but not sure if it can handle an upgrade. Will it actually start handling even slower because an upgraded OS is wearing it down? Any suggestions? More computer info listed below:
Proc. 500 MHZ PowerPC Gc
iMac version 22.14
Mem 348 MB
OS Version 10.2.8
Thanks for any feedback/suggestions on both the clock issue and improving browsing sluggishness.

You can run the top command in the terminal to get an idea about system and memory usage.
Macintosh-HD -> Applications -> Utilities -> Terminal
type
top -u
then press enter and you will some memory stats. The display is hard to digest, but if you watch for awhile (days) you will get some hints.
Look for this line. The number in yours will be different.
PhysMem: 58.8M wired, 101M active, 271M inactive, 431M used, 336M free
so
wired + active + inactive = used
used + free = installed memory (768 off by a meg )
336M free means total unused memory. I have lots of free memory.
The next line
VM: 4.22G + 118M 22499(0) pageins, 0(0) pageouts
VM is virtual memory.
You notice I have 0(0) pageouts which says that I am not using my harddrive for extra memory space. 0 is the total (0) is this time period
Hence, I would not benefit from more memory.
You could post your number here for comments.
Mac OS 10.2 doesn't do the best job of cleaning up after itself. Perhaps a little housekeeping would help.
Here is what Apple says, "Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode."
http://docs.info.apple.com/article.html?artnum=107388
Perhaps you should try running the periodic jobs. These jobs are run daily weekly monthly to do general system maintenance. These jobs will clean up the logs.
Macintosh-HD -> Applications -> Utilities -> Terminal
sudo periodic daily weekly monthly
Note: Enter your logon password. You need to be logoned on with an administrator id.
Maybe you should try one of these general clean up programs. You might backup your system before pounding too hard. I'd repair permissions as suggested earlier.
Yasu is a “Universal Binary” Macintosh utility that performs maintenance routines and clears the many cache files used by OS X. Yasu was designed to be a simple, first line of attack for a workstation that has started “acting up.” More often than not, a thorough purge of the cache files of a Mac will bring its behavior back into line.
http://jimmitchell.org/projects/yasu/
OnyX allows you to run misc tasks of system maintenance, to configure certain hidden parameters of the Finder, Dock, Safari, Dashboard, Expose, Disk Utility... to delete cache, to remove a certain number of files and folders that may become cumbersome, to see the detailed info of your configuration, to preview the different logs and CrashReporter reports, and more.
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
Robert

Having a problem with Add-ons I did not install and now can't uninstall.

Lately I have experienced problems with re-directing and other issues with Mozilla. I looked in my add-ons list and there are several things there that i did not add manually. (I have been having much trouble with ITunes and noticed a plug in in mozilla and want to know if it is necessary.) Is there a way to keep this from happening? I have been using mozilla for years and liked it when I could do a basic install without any add-ons that I did not request. Here is a list of the things that are troubling me - I am sure a few may be necessary. I would appreciate any help anyone can give me with this?
PLUG-INS-
Java Deployment Toolkit 6.0.200.2 NPRuntime Script Plug-in Library for Java(TM) Deploy
Java (TM) Platform SE 6 U20 6.0.200.2 Next Generation Java Plug-in 1.6..0_20 for Mozilla Browsers
Mozilla Default Plug In
(THESE LAST THREE ALL CAME UP AS UNIDENTIFIED PLUG-IN ON MOZILLA PLUG IN CHECK SITE)
Itunes Application Detector 1.0.1.1
Itunes Detector Plug-In
Wacom Dynamic Link Library 1.1.0.3
Wacom Dynamic Link Library
Windows Presentation Foundation 3.5.30729.1
Windows presentation foundation (WPF) plug-in for Mozilla Browsers
EXTENSIONS_ Java Console 6.0.23
Java Console 6.0.20
(Just curious with these two Java consoles - which by the way I am unable to uninstall - the uninstall button is grayed out. and I can only disable.)
Really frustrated with this, I have already uninstalled Firefox and re-installed it - losing all my bookmarks and these add-ons were there after the re-install. PLEASE HELP!

For camera problem try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
I do not understand what you mean about your update problem

"Add to Cart" is not working and not showing up?

In "PartsListBlock.ascx" I have got a row:
<asp:TemplateColumn HeaderText="www" Visible="True">
                        <ItemStyle HorizontalAlign="center"></ItemStyle>
                        <ItemTemplate >
                         <asp:HyperLink id="lnkAddToCart" runat="server" ImageUrl="~/assets/common/themes/balticpolo/addtocart.gif"
                                NavigateUrl="../../commerce/cart.aspx?AddPartNo=" visible="True">In den Einkaufskorb.</asp:HyperLink>
                        </ItemTemplate>
                    </asp:TemplateColumn>
But this row is not visible.
I need to provide the opportunity to add an item right from PartList Block to the shopping cart..
Any idea ?
[Edit you can see the shop here: <a href="http://195.226.73.238/catalog/partlist.aspx?CategoryID=9&serverid=balticpolo">clicky</a>
Message was edited by:
        Bjoern Kaiser

Thanks Stephen,
I got one step further =)
Now there is at least an output from the codeblock.
But:
<asp:HyperLink id="lnkAddToCart" runat="server" ImageUrl="../../assets/common/icons/addtocart.gif"
                                NavigateUrl="../../commerce/cart.aspx?AddPartNo=">Add To Cart.</asp:HyperLink>
shows the "Search" Button, which leads to the detail site.
But I didnt declared it nor wanted it to pop up there (http://195.226.73.238/catalog/partlist.aspx?CategoryID=9&serverid=balticpolo)
I use the original partlistblock, only with changes in style and order.
Is the order important ?!
I tried to make the code readable:
<asp:TemplateColumn>
                        <ItemStyle VerticalAlign="top" CssClass="catDetail" ></ItemStyle>
                        <ItemTemplate >
                             <h2 class="catDetailPartName">
                                <asp:Literal id=ltlPartName runat="server" Text='<%# DataBinder.Eval(Container, "DataItem.PartName") %>'>
                                </asp:Literal>
                            </h2>
                             <p >
                                <asp:Literal id=ltlPartDescription runat="server" Text='<%# DataBinder.Eval(Container, "DataItem.Description") %>'>
                                </asp:Literal><br /><br />
                                Preis: <asp:Literal id="ltlPartPrice" runat="server" Text="N/A"></asp:Literal>
                            </p>
                            <asp:HyperLink id="lnkImage" runat="server" NavigateUrl="../partdetail.aspx?partno=" Text='<%# DataBinder.Eval(Container, "DataItem.PartName") %>'>
                            </asp:HyperLink>
                            <br clear="all" />
                             <asp:HyperLink id="lnkAddToCart" runat="server" ImageUrl="../../assets/common/icons/addtocart.gif"
                                NavigateUrl="../../commerce/cart.aspx?AddPartNo=">Add To Cart.</asp:HyperLink>
                        </ItemTemplate>
                    </asp:TemplateColumn>
is this totally wrong ?

Issues with Advance Table Add Row New Row not work in some scenarios.

Hi,
Wondering if there's any issue with Advanced Tables where it does not create any rows. I don't know if anyone tried this or not. I have one OA Page with Advanced Table and a button that when clicked open a new OA Page in a POP-UP Window. The pop-up page conatins one textbox where u enter a data and this gets saved in one of the VO's transient attribute. Now on the ase page if you don't click a button to open a pop-up page you can Add New Rows in the Advanced Table by clicking Add Row Button. But as soon as you open a popup window and close it Add New Rows button doesn't work and is not creating any new rows. Basically page stops working. Both the POP-UP and the base page share the same AM but have different controllers.
POP-UP page is a custom page that I open giving the Destination URI value in the button item and target frame _blank.
I even tried creating rows programmatically for Advance Table but this too doesn't work once u open a pop-up. Also I have used pageContext.putTransactionValue in the pop-up page and am checking and removing this in the base page.
Any help is appreciated.
Thanks

anyone

I have just done a c drive clean and now i have a problem with wed site, the background will not load and some web i get error massages

Im using explorer to ask this question
here a screen shot of ninemsn web site
[http://example.com http://imageshack.us/photo/my-images/830/screenshot019ez.jpg/]
one of the error massage i get,
File not found
Firefox can't find the file at http://www.raafsquad.com/welcome.htm.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Add an in-line notes panel and some kind of notification.

Similar Messages

Maybe you are looking for