Add another custom tab to sales crmd_bus2000115

Hello Gurus,
I cannot add another custom tab because it overwrites the old one. I've tried the transaction crmv_ssc but i think doesn't serves.
Any suggestions.
Thanks a lot.

Hi Pablo,
You shoudl be able to do it using Screen sequence control. I hope you are aware of possible issues of using CRMV_SSC.
Refer to the thread.
Re: Change of tabs in sales document layout
Thanks,
Surendar

Similar Messages

Add two customer tab in ME53N screen

Hi Experts,
We have added one customer tab in the (ME53N) Requisition screen using screen exit SAPLMEGUI (SUB0).
Is it possible to add another customer tab to that screen?
Regards,
Anirban

Hi Anirban,
We can achieve the target of adding a customer tab using the exit MEREQ001.
Go to Tcode SMOD , Enter the Enhancement as MEREQ001 , Click on 'Documentation' and SAP has given an excellent step by step procedure on how to add a tab at item level.
Hope it helps
Regards
Byju

Add a custom tab to include custom fields in Shipment Screen (VT03N)

Hello every one,
We have a requirement to add a custom tab to include custom fields in shipment header.
Can any one of you help me on this?
Thanks in advance !!!
Regards,
Ganga

Hi Ganga,
This is the question of customer exit....you will get very good links on the forum itself...but i can give you some hint:
1. fing out the package or program name for the transaction(by gng in the setting)
2. go to se84 and in the enhancement->customer exit tab...with the help of pkg name got above find out the various enhacement for this tcode.
3.find out the appropriate one by putting in the break point.
4. You can get an exit with a screen exit where you will create your own screen(with the custom field if.....then you have to append them in the table) or with the std fields.
5. there you will get the fm exit for PBO and PAI as well.
Hope this might help you in solving the problem.
Pooja

How to add a new tab to sales order header level

Hello Experts,
I have to add a new tab 'Billing Plan' at sales order header level.
As per my functional person, If I modify TVAK-FPART field with some value than tab will be come.
I tried to modify TVAK-FPART field in debug mode and was able to see the tab, BUT when I again came back to
VA03/VA03 transaction then that tab was not there.
Pls help me to resolve this problem..
Rocks!!

Hello Rock,
I have the similar requirement, to add a new tab at the sales order item level. there are already two customer tabs but i dont want to use them, instead i want to use a new tab to be created. i searched BADIs but the BADI BADI_SD_TAB_CUST_I is for SAP Internal use only.
Kindly suggest whay way you used to create a new tab. thanks in advance.
Reagrds
Sachin

Add Header Custom Tab to PO and Contract

Dear Gurus,
I need to add custom tab with WYT3 field to PO and Contract Header.
Could you please help me to understand how to do that?
Thank you in advance,
Fuffo

Hi Ganga,
This is the question of customer exit....you will get very good links on the forum itself...but i can give you some hint:
1. fing out the package or program name for the transaction(by gng in the setting)
2. go to se84 and in the enhancement->customer exit tab...with the help of pkg name got above find out the various enhacement for this tcode.
3.find out the appropriate one by putting in the break point.
4. You can get an exit with a screen exit where you will create your own screen(with the custom field if.....then you have to append them in the table) or with the std fields.
5. there you will get the fm exit for PBO and PAI as well.
Hope this might help you in solving the problem.
Pooja

Add new custom tab to SC item

Hi all,
I want to add a new custom tab to SC item.
I've created an enhancement point within the component /SAPSRM/WDC_UI_SC_DOFC_D1 and I've added the new tab.
The problem is that when I select this tab in the portal a message is displayed as following:
"The screen component is unknown. The navigation must be canceled"
By the moment the tab is empty, but I've tried to add a ViewContainerUI Element and I've added an embed view in the window, but the same message is still displayed...
Do you know what i need to do in order to add this new tab?
Thanks in advance.

now, i am getting the data with the following sentence:
DATA: lv_guid TYPE bbp_guid.
    DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
    lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
    lv_guid = lo_componentcontroller->mo_bom_sc->/sapsrm/if_cll_item_admin~get_lead_selection( ).
Then I can use the bapi BBP_PD_SC_ITEM_GETDETAIL in order to get the data.
Now, i want to SET this data with some modifications...
Any idea?

How to add new custom tab to WZR1/2/3 at line item level

Hi,
Please explain how I can add new tab with custom fields at item level in SAP transactions WZR1/2/3. I am trying to use BADI WLF_ENHANCE_SCREEN_EX but somehow its not working. Please explain how this can be done ?
Thanks
Ullas

Hi,
We are trying to copy a work flow objects from ECC6.0 to 4.6C...where we found the following Select statement.
*Determine Top WorkItem Instance
if im_top_wi_id is initial.
   select wi_id top_wi_id wi_rh_task into lw_top_id from sww_wi2obj
     up to 1 rows
     where wi_rh_task = im_wftask and
           catid      = 'BO'      and
           instid     = l_instid and
           typeid     = 'FIPP'.
   endselect.
   endif
As table sww_wi2obj can't be found in 4.6C, can any one help how to replace or implement the same logic as above statements.
Thank you....

Add new tab under 'Sales Area view/Data' of Customer Master TransactionXD01

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Adding custom field in sales tab of BP transaction

Hi Experts,
There is a requirement to add a custom field in sales tab of BP transaction in 'Sales area data', above the field 'Customer group 1'.
Is it possible with BDT,else any other method to handle the procedure.
I think it is not possible with EEWB to add field in this screen of BP. Please correct me if am wrong.
Thanking you in anticipation.
Regards,
Santosh

Hi Santosh,
Refer the link **************** - Step by step procedure to enhance the BP using BDT.
Thanks,
Ritu

Add new tab in Sales Order(VA01/02/03)

Hi All,
Additional Tab A and Tab B in Sales Order (header) are already used for other developments so I need to add a new tab in Sales Order header/item. (I have already updated the table VBAK/VBAP with the include structure).
Could anyone give the steps as to how I could proceed ?.
Thanks,
Kushi

Hi Kushi,
You can use screen 4459 or 4462 in program SAPMV45A which are the item additional data A or B tab to add your custom fields. In order to capture the data from this custom fields you can use user exit USEREXIT_SAVE_DOCUMENT_PREPARE OR USEREXIT_SAVE_DOCUMENT in program MV45AFZZ.
Please check this link for more information on sales order user exits.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Regards,
Ferry Lianto

Add custom tab in Asset Master

Dear Experts,
I would like to add a custom tab in asset master (AS01, AS02, AS03).
I have read through the documentation for enhancement AIST0002, but still don't know how to do it.
Can anyone please advise? Thanks a lot.

Hi,
If you have create a proj in CMOD and activated the screen the new tab should be avaliable if it is not it might need some customizing try like below:
Transaction AOLK>>Select your Asset class click on General Assignment of Layout
Go to transaction AOLA. Copy the tab layout u2018SAPu2019 to create another layout, say, ZSAP.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder u2018Tab page titlesu2019.
You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you.
Then, save and come out.
Now, go to tcode AOLK and assign tab layout ZSAP. for asset class 1000.
check now.
Regards,
Himanshu

The Custom Tab Width add-on doesn't work in Firefox 25

I use the add-on 'Custom Tab Width' (https://addons.mozilla.org/en-US/firefox/addon/custom-tab-width) so that my tabs can shrink infinitely, but after updating to Firefox 25, it no longer seems to work. Is this add-on incompatible with Firefox 25? In that case, is there any other way to make the tabs shrink infinitely?

Hi GAPa,
Thanks for visiting Mozilla Support!
This addon is indeed compatible with Fx25 as I have tested it. Try this. Press '''CTRL + SHIFT +A''' and click on '''Extensions''', then go into Options on '''Custom Tab Width''' then input '''1''' as MIN. Does that help?
If not, feel free to reply and we will try other things to get this resolved.

Add new tab for sales transaction

Hi,
I want to add a new tab in sales transaction for bank detail, the data of this tab should be get from BP master data, and save to crmd_order transaction table.
what method should I implement?
thanks
Gang

Hi Gang,
Use EEWB to enhance the order. The fields shall be added to CRMD_CUSTOMER_H table.
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/43/04bede807721ece10000000a155369/frameset.htm">EEWB</a>
for populating these fields based on BP master data, use BADI COM_PARTNER_BADI method COM_PARTNER_MERGE.
This BADI gets called when you enter partners (sold-to-party). In the mentioned badi method, read bank details from BP master and set this to your Z-fiedlss using FM CRM_CUSTOMER_H_MAINTAIN_OW.
Hope this helps.
Regards
Kaushal

SRM : Custom Tab in RFx Item Details

Hi ,
I have a requirement to add a custom tab to the Item Details Tab of the RFx which has some custom Input fields and Checkboxes.
For this i have created a Custom Tab in component /sapsrm/wdc_dofc_rfq_i_d1 through enhancement and used a separate z component to display the fields in custom tab. (declared zcomponent as used component in /sapsrm/wdc_dofc_rfq_i_d1).
I have instantiated my component usage in different methods of main component where other standard tabs were instantiated.
As per the settings I am able to display the custom tab when i run the application but when i toggle the tabs it is giving some errors.
Can anybody pls let me know some of the key points which I need to take care while adding the custom tab. How can I handle the standard SAVE and Edit Buttons in my components and also the processes which occur when I navigate from one tab to another???

Hi Kartic,
My requirements was a little bit different from yours...
For CTR my Z component is only for display data, so its not necessary to save any data.
For SC I had a table with some data and when I select a line is necessary to push a button to assign some values to the fields price, quantity, etc (standard fields)
The solution for the SC was a bit difficult. I haven't access to that system now and i don't remember all the details.
I'll try to explain to you what I did:
- Create an event as interface in your Z component, this event should be triggered when the user push somo button in your view.
- Create a method as event handler for this event in the standard component
- For update the standard fields you need to use the method:
wd_this->MO_DODM_RFQ_I_D1->/SAPSRM/IF_CLL_MAPPER~UPDATE( ).
- I needed to add an enhancement point in that method and pass the data with IMPORT/EXPORT TO/FROM MEMORY.
- For save the data I used the methods get_item_detail and update_item for the class /SAPSRM/IF_PDO_BO_* and the method submit_update for the class /SAPSRM/IF_PDO_BASE.
You need to investigate these classes, you can copy and use some standard code to do it.
I don't know if this help you and if exits other easiest way to do it. sorry.
Best Regards,

Ribbon Custom tab won't appear on custom list

Hi all! If anyone could be so kind and help me with the following.
I have created a custom list in Visual Studio 2012 and i am trying to add a custom tab to that list.
Below is the content of the elements file for the custom tab and respective controls:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction
Id="MyCustomRibbonTab"
Location="CommandUI.Ribbon"
RegistrationId="10000"
RegistrationType="List">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition
Location="Ribbon.Tabs._children">
<Tab
Id="Ribbon.AnnualLeaveTab"
Title="Annual Leave"
Description="Annual LEave requests!"
Sequence="301">
<Scaling
Id="Ribbon.AnnualLeaveTab.Scaling">
<MaxSize
Id="Ribbon.AnnualLeaveTab.MaxSize"
GroupId="Ribbon.AnnualLeaveTab.CustomGroupExample"
Size="OneLargeTwoMedium"/>
<Scale
Id="Ribbon.AnnualLeaveTab.Scaling.CustomTabScaling"
GroupId="Ribbon.AnnualLeaveTab.CustomGroupExample"
Size="OneLargeTwoMedium" />
</Scaling>
<Groups Id="Ribbon.AnnualLeaveTab.Groups">
<Group
Id="Ribbon.AnnualLeaveTab.CustomGroupExample"
Description="This is the Annual Leave request custom group!"
Title="Annual Leave Request"
Sequence="52"
Template="Ribbon.Templates.CustomTemplateExample">
<Controls Id="Ribbon.AnnualLeaveTab.CustomGroupExample.Controls">
<Button
Id="Ribbon.AnnualLeaveTab.CustomGroupExample.New"
Command="AnnualLeaveTab.New"
Sequence="15"
Image16by16="/_layouts/15/1033/images/formatmap16x16.png"
Image32by32="/_layouts/15/1033/images/formatmap32x32.png"
Image32by32Class="CSS Class Selector"
Image32by32Top="-205"
Image32by32Left="-341"
Description="Create new Annual Leave Request"
LabelText="Create New"
TemplateAlias="cust1"/>
<Button
Id="Ribbon.AnnualLeaveTab.CustomGroupExample.Approve"
Command="AnnualLeaveTab.Approve"
Sequence="17"
Image16by16="/_layouts/15/1033/images/formatmap16x16.png"
Image32by32="/_layouts/15/1033/images/formatmap32x32.png"
Image16by16Class="CSS Class Selector"
Image16by16Top="-198"
Image16by16Left="-290"
Description="Approve selected request"
LabelText="Approve"
TemplateAlias="cust2"/>
<Button
Id="Ribbon.AnnualLeaveTab.CustomGroupExample.Reject"
Command="AnnualLeaveTab.Reject"
Sequence="19"
Image16by16="/_layouts/15/1033/images/formatmap16x16.png"
Image32by32="/_layouts/15/1033/images/formatmap32x32.png"
Image16by16Class="CSS Class Selector"
Image16by16Top="-181"
Image16by16Left="-290"
Description="Reject selected Request"
LabelText="Reject"
TemplateAlias="cust3"/>
</Controls>
</Group>
</Groups>
</Tab>
</CommandUIDefinition>
<CommandUIDefinition Location="Ribbon.Templates._children">
<GroupTemplate Id="Ribbon.Templates.CustomTemplateExample">
<Layout
Title="OneLargeTwoMedium"
LayoutTitle="OneLargeTwoMedium">
<Section Alignment="Top" Type="OneRow">
<Row>
<ControlRef DisplayMode="Large" TemplateAlias="cust1" />
</Row>
</Section>
<Section Alignment="Top" Type="TwoRow">
<Row>
<ControlRef DisplayMode="Medium" TemplateAlias="cust2" />
</Row>
<Row>
<ControlRef DisplayMode="Medium" TemplateAlias="cust3" />
</Row>
</Section>
</Layout>
</GroupTemplate>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler
Command="AnnualLeaveTab.New"
CommandAction="javascript:SP.UI.ModalDialog.ShowPopupDialog('/SitePages/Leave%20Request.aspx?isDlg=1','_blank');" />
<CommandUIHandler
Command="AnnualLeaveTab.Approve"
CommandAction="javascript:alert('Approved');" />
<CommandUIHandler
Command="AnnualLeaveTab.Reject"
CommandAction="javascript:alert('Rejected');" />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>
The contents of the element file for the list is as below:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ListTemplate
Name="IFX_Leave"
Type="10000"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="IFX_Leave"
Description="My List Definition"
Image="/_layouts/15/images/itgen.png"/>
</Elements>
As seen, the RegistrationID and list Type ID are the same so in theory this should work. Also, for other lists deployed through the same solution with the same Type ID, the ribbon tab and controls render perfectly fine.
Any ideas what may be the issue here?
Appreciate your input!

Hi,
According to your post, my understanding is that you had an issue about the custom tab for list.
As you had said, the other tabs for other lists in the same solution worked well, the code would have no issues.
I recommend you create a new clean project with only one list and the tab to check whether it works.
What’s more, you can also change the list template type ID(such as 100), then check whether it works.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Add another custom tab to sales crmd_bus2000115

Similar Messages

Maybe you are looking for