Add another local domain but not sending

dear all,
i have OCS R2 i am able to send email form local domain (ocsmail.x.com) to the same domain and extarnaly to hotmail.
i had to add another mail domain (mail.xyz.com) now i am not able to send emai from mail.xyz.com to ocsmail.test.com while i am able to send emials outside to hotmail, what configration should i do to let it send emails localy but to other domails.

Hi
Havic,
>>When I try those setting, I cannot logon locally with this new account (good). I can remove it from the domain (good). I cannot add it back. I'm getting a:
"The join operation was not successful. This could be because an existing computer account having the name was previously created using a different set of credentials..."
According to your error message, it is limited by access is denied.
So to solve the problem, please add the complete set of permission to allow the appropriate users to rejoin the computer accounts in Active Directory.
During my test, these permissions are necessary:
     Create Computer objects
    Delete Computer objects
     Reset Password
     Read and write Account Restrictions
     Validated write to DNS host name
     Validated write to service principal name
Here is the link for how to do: https://support.microsoft.com/en-us/kb/932455
Best Regards
Mary Dong

Similar Messages

Permissions to add workstation to domain but not login locally

I've found several posts describing how to setup an account that can be used to add a machine to AD Domain. But after trying it I found that account could also be used to login to that same machine locally. If I try to deny logon locally permission
to the account I create it can not longer add the machine to the domain.
So my question it: Is it possible to setup a AD user account that can add a machine to a Domain, that can re-add a machine to a domain (which I think needs some delete permissions to remove the old machine account), and can not log on locally to this
or any workstation in the domain?
In case it matters I'm still using an AD in a Server 2008R2 domain.
Thanks

Hi
Havic,
>>When I try those setting, I cannot logon locally with this new account (good). I can remove it from the domain (good). I cannot add it back. I'm getting a:
"The join operation was not successful. This could be because an existing computer account having the name was previously created using a different set of credentials..."
According to your error message, it is limited by access is denied.
So to solve the problem, please add the complete set of permission to allow the appropriate users to rejoin the computer accounts in Active Directory.
During my test, these permissions are necessary:
     Create Computer objects
    Delete Computer objects
     Reset Password
     Read and write Account Restrictions
     Validated write to DNS host name
     Validated write to service principal name
Here is the link for how to do: https://support.microsoft.com/en-us/kb/932455
Best Regards
Mary Dong

I've set up email on my iPad (talk mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this

I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Can't sent emails after iPhone 5S upgrade to 7.1.1. Receive works but not send.

My wife’s iPhone stopped sending emails after upgrading to iOS 7.1.1. She can receive emails but not send. I compared the email settings on my 5s with 7.1 (and no issues) to hers and they are identical (both are road runner accounts with the same domain name). If I delete her email account and then re-add the account, send email works for a while but will eventually fail. I’ve also been able to get send emails to work on her phone after sending an email from the same account via MS Outlook on my PC. Everything else on the phone is working and her email account also works fine from MS outlook on my PC and on her MacBook Pro. I called Verizon and they said they have had similar complaints from others after an iOS 7.1.1 upgrade. They had me delete/add the account then reset the wifi settings but that didn’t fix the issue. They suggested contacting road runner. Any thoughts on what the problem and resolution would be?

OK so apparently it's some kind of corrupt backup. I checked my backup list and there's one from a year ago and then a few from this morning. Anytime I try to restore to the ones this morning, I have this problem. I was able to successfully restore from the one from a year ago.
Now trying to get everything organized the way I like it. Ughh!!!

Receive, But Not Send Mail

I recently purchased a new iMac and bought ProCare to bring all of my important documents from the old iMac to the new iMac. Since bringing home the new computer, I can only receive e-mail. Here are a few of the specifics:
We use comcast and have a wireless router in the house. I have tried connecting directly to the modem and wirelessly. I have tried using no authentication and authentication. I have tried using SSL. I have made sure the ports are correct for each of these settings. I have deleted the outgoing servers and reentered them. I have added a new account. That cannot send mail either. I also have an 14" iBook. I can send and receive mail from all accounts on that computer. To add to the confusion, I configured Entourage to send and receive e-mail today and it works with out any problems.
I am worried a corrupted e-mail came from the old computer?!? Is that possible? I think I have narrowed it down to the Mail application itself. Is there a pref file I should trash? I am confused as to why I can receive but not send? Another detail. When I hit send, it simply puts the file in the drafts folder. It is not as though the server is busy and puts the file in the Outbox.
Any help would be great. It is hard to get to the store for the genius to trouble shoot the issue.
Thanks in advance,
Debbie

When I hit send, it simply puts the file in the drafts folder.
What do you mean? The message is already in Drafts when you compose it, isn’t it? Does clicking the Send button actually do anything? Is it enabled at all or is it grayed out? Can you type the content of the message normally?
Proceed as follows:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that Console displays the contents of both system.log and console.log.
3. Try to reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result. They may provide some clues.

Additional email address will receive but not send

My .mac email address works fine, sending and rerceiving in "Mail" I have another email address with virgin.net. which will receive but not send. I get a pop-up window saying "cannot send using smpt mac.com" (this is the server selected for my .mac address account) I have tried selecting the virgin smpt server but that doesn't work either. What should I do?
Thanks for all suggestions
Rob
imac G5 isight Mac OS X (10.4.2)

Most, if not all ISPs block the use of SMTP servers that are outside of their network (or not provided by the ISP) on Port 25. Some ISPs allow the use of an authenticated SMTP server only (such as the .Mac SMTP server) that is outside of the network on Port 25 but some block its use regardless.
Sounds like BT Broadband allows the use of an authenticated SMTP server that is outside of their network on Port 25 and the virgin.net SMTP server must not be authenticated.
Are you accessing an email account and SMTP server provided by BT Broadband with the Mail.app?
Something to try.
Go to Mail > Preferences > Accounts and under the Account Information tab for the virgin.net account preferences at the SMTP server selection, select the Server Settings button below.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If this doesn't resolve the problem and you are accessing an email account and SMTP server provided by BT Broadband in Mail, select/use BT Broadband's SMTP server to send mail with your virgin.net account which is invisible to all recipients.
These SMTP server restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.

Why can I receive but not send messages through Mail?

I recently installed a wireless router (linksys). I can send mail at the local coffee shop, yet here at home I can't. I know it's something very simple, but I'm giving up...and asking for help in fear of tweaking the settings beyond my knowledge. I get a popup that tells me I can't use the listed server for outgoing mail. I have a couple choices...1) lynksys 2)stmp.mac.com:tugboater.
I wish I could get it set up...Its annoying to have to use mt yahoo address.
Heelllppp!

Help! I have read through this string, but not found an answer. I too, can receive emails but not send them. The problem started last week - I've been successfully using my mail account for 2 years and then last week, stuff I send just disappears - no error messages. I didn't change any settings or do any updates. All sent messages show in my "sent" folder, as well. I have tried everything, including restoring my hard drive from a backup copy made before I was having difficulty.
I used suggestions in the online help, including using the "ping" function to see if I was communicating with my outgoing mail server. Trying to ping mail.mac.com I get the error message:
"PING mail.mac.com (17.250.248.152): 56 data bytes
--- mail.mac.com ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
I am using mail and .mac mail through a cable DSL line and Airport wireless connection.
I tried changing my outgoing port to 110 and to 25 without help.
Any thoughts?

Mac mail 7.3 receiving but not sending

Hello everyone,
I have been stuggling with this problem for three days now. I set up a new e-mail account (for a new job) and the new account will receive fine but not send. Here is the general set of steps that I followed:
* Used IMAP unsecured - smtp port 25. Failed due to port blocking
* Used IMAP unsecured - smtp port 587. Works on other servers but this one not.
* Used IMAP and smtp secured with SSL - smtp port 465. Failed.
The last one is what I believe I should be using. I get the standard "Could not connect to this SMTP server..." message on connection doctor, and all I get from the log is:
INITIATING CONNECTION Jun 10 11:04:13.633 host:vps2955.inmotionhosting.com -- port:465 -- socket:0x0 -- thread:0x608002468c00
CONNECTED Jun 10 11:04:14.278 [kCFStreamSocketSecurityLevelNone] -- host:vps2955.inmotionhosting.com -- port:465 -- socket:0x600000ad8d40 -- thread:0x608002468c00
With no "READ" or "WROTE" messages or anything else. The "kCFStreamSocketSecurityLevelNone" seems odd, but I've seen that elsewhere. I've also tried:
* Turning off SSL and using 465 - failed
* Deleting all related keychain items - no effect (after accepting the cert)
* Running keychain first aid - no problems
I contact inmotion hosting and they said my settings all look right. They can probe further, but I need to coordinate with my boss to get permissions for them to do that (maybe later today).
One additional thing - using network utility I am able to see port 465 on this server as expected.
I'm at a loss. I've set up many, many e-mail accounts in the past and this is the first time I have ever had these sorts of problems. Help!!!

Under no circumstances should you ever change the trust settings of any SSL certificate, unless you created it yourself. That's just about the most dangerous thing you can do with a computer.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
 ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 3
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
When using this certificate: Use System Defaults
Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings.Never again change any of those settings.
Step 4
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 5
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 6
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Step 7
Restart the computer, empty the Trash, and test.

Yahoo Mail issue, able to recieve but not send.

I sold my friend my Macbookpro running 10.5.3 and he is able to receive emails but not send them even though the MBP makes the sound like the email was sent. Yahoo says they are not reaching their server. I told him to repair disk permissions which may be a long shot and if that did not work to add a new user account and re setup the email account over again and see if they go out from there. Any other suggestions would be appreciated. I know I have had this issue before but it was just because my outgoing mail server was not typed in properly.
He says everything is correct. Could it be a port issue?

Please see if the Apple mail troubleshooting support article resolves this misbehavior.
Sending is the SMTP path, which is the one that nobody new to mail can find — mail uses POP or IMAP for receiving, and SMTP for sending, and there are separate settings, servers and login credentials for each. To get to the SMTP settings, Mail > Preferences > Accounts > select the failing account > Account Information > select Outgoing Mail Server (SMTP) to Edit Mail Server List > select the SMTP account > verify the settings for the server, that SSL/TLS is enabled (usually) or not (rare), and that your username and password are correct. Like the POP or IMAP settings, these SMTP settings and credentials are also specific to your mail ISP, which means I don't know exactly what the required settings are here.
With the way that mail pops up that infernal "do you want to cause yourself grief by changing your password?" dialog box on transient network errors, it's very easy to get an incorrect password set, too.
I'm not sure why you've listed web server, Linux, Apache and PHP in your posting.

Can recieve emails but not send

hi,
yet another question I'm afraid.....
I can recieve incomming emails to my ipod touch but not send them and as a bit of a duffer when it comes to pc stuff was wondering what the cause/problem may be? any help would be great

You'd probably get a quicker answer to this if you post it in the iPod Touch forum. You'll find it here: Discussions - iPod Touch

I can receive mail on my iPad but not send it; tried deleting and adding email account, I can receive mail on my iPad but not send it; tried deleting and adding email account

I can receive mail on my iPad but not send it; tried deleting and adding email account, I can receive mail on my iPad but not send it; tried deleting and adding email account.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Mail recieving but not sending on Yahoo account!

Hi,
I have had my Yahoo email set up and running fine through Mail for the last year or so. However for the last couple of days I can receive email's but not send them.
I have three yahoo accounts and it's the same on all three. I've tested the connection settings and they're all fine. I've even deleted the accounts from Mail and set them up again from scratch.
I get the following error:
*'Sending the message content to the server failed.*
*Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be delivered.'*
Anyone else getting this problem?
Thanks in advance for your help.
Steve

In order to prevent spam and address spoofing, some mail systems are now being set to disallow 'relay'
That is, sending to another host via an intermediate account.
Example: Your mail account is [email protected]
You are popping mail from [email protected] You get a message at your yahoo address from [email protected]
When you try to reply to the yahoo message from your host.com account, you are trying to use host.com as an intermediate to yahoo.com, which will in turn send the reply to [email protected]
you are thus asking host.com to relay a message from [email protected] to [email protected]
In reality, host.com has no idea who [email protected] is.
So it refuses to allow an unknown user from a foreign system to use it's mail server to send to a 3rd mail server. This is considered relay, and it's a favorite tactic for spammers.
That may be why you are told to "select a different outgoing server"

TS4268 My phone will receive but not send iMessages?

Lately, I have been able to receive iMessages but not send any, any ideas on how to fix this? Thanks :3

One thing you might want to do is search on google to see if they are reporting any issues with mail client usage.
Also, another option would be to reboot your Mac. Sometimes all you need to do to fix an odd problem with a computer is to reboot.

Add another local domain but not sending

Similar Messages

Maybe you are looking for