Add another port to router

Is there anyway to add another port to a router, so i can still be able to use all 5 wired ports in my house?

Buy a standard ethernet switch to extend your wired network.

Similar Messages

Can I add another output port?

I would like to know if I can add another audio output port, other than the headphones port, either trough a USB or FireWire cable or adaptor - so then I can have 2 audio output port.
Does somebody know a way?
Thanks.

Hi JP,
I don't know if there is such USB devices; but probably that the cheapest solution will be to bought a splitter for your audio cable. It could be either a RCA or a 1/8" splitter depending of your cable setup.
If this is to plug two audio system with audio cable, this will probably be simpler than have to manage an USB audio output through some software. But again, I'm not familiar with this kind of device if there is any.

Port based routing?

Hi,
My Mac connects to Internet through ADSL router, and to a PPTP-VPN host through this connection.
And I want to FORCE all my http/https connections(that use destination port 80, 443, and perhaps some more) to use the VPN, while keep anything else go through the ADSL router directly.
Is this possible?

Did you find any solution?
I'm trying to find a way to do this too.. on linux port based routing can be done with iptables. Mac OS X uses ipfw but:
The fwd action does not change the contents of the packet at all.
In particular, the destination address remains unmodified, so
packets forwarded to another system will usually be rejected by
that system unless there is a matching rule on that system to
capture them.
Then there is natd? I'm not sure if this can be used..
And another one is /etc/pf.conf which has this openbsd guide but fails with "PF ERROR! No ALTQ support in kernel. ALTQ related functions disabled".

Add another listener to database

Hi expert
I have EBS v 11.5.10.2 with Database 9.2.0.6 and on this database I have one listener and all employees connect throw this listener with 1521 port , I am thinking to add another listener with 1531 port in database .
How can the application see the both listener in the same time.
Regards
Mohammed

Mohammed,
If you are asking about load balancing, the following documents should be helpful.
Note: 217368.1 - Advanced Configurations and Topologies for Enterprise Deployments of E-Business Suite 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217368.1
Note: 306653.1 - Installing and Configuring Web Cache 10.1.2 and Oracle E-Business Suite 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=306653.1
For PCP, refer to:
Note: 388495.1 - How to Set Up Parallel Concurrent Processing (PCP) in Apps 11i?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388495.1
Regards,
Hussein

Add another dept. to Address Book?

The top of the listings in Address Book don't have enough lines available. I want to enter a sub-department under the listing for "Department," and I can't. I have gone to Address Book's Template, but it won't let me add another "department." Is this part of the address modifiable?

Hi Christian,
Interestingly, I found a pointer that might address the first problem you cited. There's a method that might get your secondary user's shared contacts into your addressbook after all...
http://www.slipstick.com/outlook/contacts/display-other-contacts-in-address-book
Check the instructions out, maybe you can make that work for your scenario.
If you want to go the Public Folders route, the intermediary step (after you create the folder) is to add the folder to your Public Folder Favorites. Browse, find the folder, right click the contacts folder and choose Add To Favorites. Once you
add to your favorites you should see the option to show the folder as an email addressbook.
Good luck,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

HT4913 Unable to add another device to Icloud-Match

When I attempt to add another IOS device (my IPAD) to Itunes Match, why does it say that I'm currently not subscribed and directs me back to my computer?
I Have an I-Cloud acct and I bought I-match.

Hi,
Its actually mentioned in some old Command References. Though while I checked the same command for other software versions it doesnt list the thing anymore even though I presume it applies still
Heres the section that mentions about the use of "deny" in NAT related ACLs. See the section mentioning the "access-list"
nat
Associate a network with a pool of global IP addresses.
[no] nat [(local_interface)] id local_ip [mask [dns] [outside | [norandomseq] [max_conns [emb_limit]]]]
[no] nat [(local_interface)] id access-list acl_name [dns] [outside | [norandomseq] [max_conns [emb_limit]]]
[no] nat [(local_interface)] 0 access-list acl_name [outside]
clear nat
show nat
Syntax Description
access-list
Lets you identify local traffic for network address translation (NAT) by specifying the local and destination addresses (or ports). This feature is known as policy NAT.
Note Use NAT exemption (nat 0 access-list) with the ACL deny statement but not with policy NAT. Use port selectors with policy NAT but not with NAT Excemption.
You can only include permit statements in the access list.
Local traffic is matched to the first matching policy NAT statement. See the "Order of NAT Commands Used to Match Local Addresses" section for more information.
Source:
http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/mr.html#wp1032129
And its "he" not "she"
- Jouni

E3200: add extra ports to forward

Hi,Is it possible to add more than 20 rules for port forwarding? The "Single port forwarding" tab allows only 20 rules. The router is used in office and we have a few virtual machines behind NAT. That VMs we need to acess from outside LAN and moreover, we need to forward not just one port to each VM but at least 3 ports to at least 7 VMs. The limit of 15 custom rules and 5 fixed rules is not enough. Kind regards,Laredo

Hi Laredo. I guess there's no option for you add more than 20 rules since it's a product design, but you may get some ideas from this link: Add more port forwarding slots? WRT300N V1.1

Cisco Connect - Add another Printer.

I need to download cisco connect.I have the disk but it tells me I am already set-up and should use cisco connect to add another printer.I do not have cisco connrct on my computer,
Mod Note:Title edited and Post moved to start a new thread.

Welcome to the Cisco Home Community.
You can go here to download Cisco Connect. Type your router model, click on the download tab and choose your router version. Cisco Connect will be available from there. Do post updates if this does not resolve your issue.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Add another 'Gen. Valn Class' .

Hi Guys,
I always appreciate your help.
I just wonder how i do setting to add another 'Gen. Valn Class' .
Basically, i controled some IMG menu like below.
Financial Supply > Treasury and Risk Manager > Transaction Manager > General Setting > Accounting > .
Financial Supply > Treasury and Risk Manager > Transaction Manager > General Setting > Money market > .
But, i couldn't find the menu to put another kind of 'Gen. Valn Class' on second tab 'Administr' in TM_53.
Could you get me any specific commend?

This has been disucuss in detail in other places and we are getting pretty sure it has nothing to do with the router and has more to do with your AirPort firmware.
Apple should be able to fix it with an update - so don't worry about your brand new SRX 400 - it should we working great with your Mac soon: it isn't even the problem.

[Newb] P67A-GD65 - Cant add another SSD

Ok, I am a total newbie when it comes to hardware. Here is the problem.
My current setup is a MSI Mobo (p67a-gd65). Has 8 SATA ports, 1,2,7,8 are white 6gb ones, 3,4,5,6 are black 3gb ones.
Right now SATA 1 has a 120gb OZC SSD which is the boot drive with windows 7. SATA 2 has a 1TB Normal Samsung drive. SATA 5 has the dvd player.
Was gonna add another Corsair SSD and plugged it into SATA 8.
But when I plug that in the bios only wants to boot from that. In the bios setup I can only find the Corsair SSD, Samsung and DVD. The OSZ bootdrive is gone. If I pull out the power it boots normally.
I am missing something but what?

Yes, but when I plug the power in. The old drive vanishes totally. Not even visible from bios. Can only chose the new Corsair SSD or the Samsung storage.

Add another listener entry

In oracle 11g, we have the database running with listener port 1521. We would like to cretae another database using the same oracle home and add the new listener entry with different port. Please advise how to add another listener entry in existing listener. thanks

CKPT wrote:
Please do not provide such stupid advice.Thinking can cause stupid, so kill the stupidity.
The number of listeners required per server is ONE! Not 2,not 100, but ONE.
Also different ports are not required. No gain is made by setting up different listeners on different ports.
The listener is a BROKER only, there is NO PERMANENT contact.oracle@ckpt-oracle:> ps -ef|grep tns
root 197 2 0 May21 ? 00:00:00 [netns]
oracle 14266 1 0 Jun16 ? 00:09:35 /oracle/app/oracle/product/10.2.0/db_1/bin/tnslsnr <listener1> -inherit
oracle 24777 1 0 Jun16 ? 00:00:09 /oracle/app/oracle/product/10.2.0/db_1/bin/tnslsnr <listener2> -inherit
oracle 40665 10111 0 03:51 pts/2 00:00:00 grep tns
oracle 46615 1 0 May21 ? 00:01:05 /oracle/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN1 -inherit
oracle@ckpt-oracle:>
Then how the two listeners are running of the same home?
They obviously can run from the same home. What they can't do is run on the same port.
OP question.
We would like to cretae another database using the same oracle home and add the new listener entry with different portTell that it is not suggestable, ok, Here question of OP is Can it be done or not?And if he had asked how to put diesel fuel in his gasoline powered auto?
Sometimes (far too often in this forum) the responsible thing to do is not to give the OP what they asked for, but to try to explain to them why they are asking for the wrong thing.

I have an ipod touch already linked to computer, i want to add another using same email details. i have set up new ipod and it has excatly same music etc as 1st ipod how can i use 1 account but 2 differnt ipods? many thanks.

i have an ipod touch linked to laptop, i now want to add another ipod touch how do i do it using same email etc, but dont want the same apps etc as the first ipod. as it is now i have exactly the same stuff on both ipods. please help.

It's a snap. Each device has its own name. If iTunes does not assign unique names for the two iPods, change one of the names yourself. You can see both my iPad and my iPod simultaneously on my iTunes because I sync wirelessly.
Simply configure the sync characteristics for each device separately. The iTunes software will know the one with which it's communicating.

Is there a way to automatically add another of the same page while a form is being filled?

Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TG

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

When I want to add an album onto my iphone using itunes, I am successful in putting one album on my phone but when I want to add another album it deletes the first album I put on my phone. How can I add more albums without some albums disappearing?

I am having a problem with importing cds onto my iPhone. I have successfully added a playlist or album to my phone but when I want to add another album/artist, the first album that was on there has all of a sudden disappeared. Its like I can only have one album on my phone. This is my first time dealing with anything Apple because I have been using android phones. Any help would be appreciated as I don't fully understand iTunes.

You can delete photos from individual albums but not from the camera roll. If you try to delete a photo from camera roll it will be deleted from all other albums ("locations") that contain the photo. This is because the actual photo is in the camera roll (the albums only contain links to the photo in camera roll, not the actual photo).

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

Add another port to router

Similar Messages

Maybe you are looking for