Add application to "My Own" folder

Hey Peeps,
I've just bought a new microSD card and the previous card had a few applications in the "my own" folder. One is a *.swf file and i would like to add them back into that folder so i can run them from this folder.
This is using a Nokia 5500 Sport phone
Any ideas?
Regards
AdamMessage Edited by viperpurple on 15-May-200711:42 PM

Try the File Manager in PC Suite or any card reader that supports micro-sd's.
All those who believe in psychokinesis raise my hand.

Similar Messages

I have asked this question several times, and keep getting shunted back, about not being able to add a bookmark to a folder in the bookmarks menu

I made a folder to hold bookmarks of one type. when i tried to add another bookmark to this folder the folder will not show up so i can add this bookmark, the box only extends down a short distance, none of the folders are in the order they are supposed to be, and the one i need i can not access.

I have Stumble Upon and it is not affecting my Bookmarks links. DO you have any add-ons that are Bookmark related add-ons? Maybe one of them took over and you can find your folders in that add-on application?

How to add all music inside a folder to a playlist...

Hi,
I have Nokia e63. There is a simple thing I wanted to ask. I wish to add all songs in a folder to a playlist. How to do that? When I select all songs in a folder inside the Memory Card, there is no option to add music to playlist.
I basically add music folders from my computer to phone's memory card. Now each of these folder contains music of different types. In windows I can easily music files to playlist by selecting all music files and putting them to a playlist.
When I refresh the music player in my phone, all sound files get accumulated in the "All songs" group, including recorded conversations and all songs genres, which is very frustrating.
Is there a way out?

Hello, I also need the answer of this exact question. I have nokia 5130 Express Music but the answer to the original poster will also apply to me. The link provided in the previous post doesn't answer the question of the original asker. Let me ask it again:
I want to create playlists out of the folders not by selecting them one by one and adding them to the desired playlist. Please do not suggest OVI Music player because that piece of junk just doesn't detect my phone no matter what mode I connect my phone with. It is detected fine in the PC suite though. Is there any harder way of doing that? By harder way I mean what playlist formats are supported by 5130 ? and is there any third party application that can create a (.pla) extension playlist. I need help. Thanks is advance.

How can we move the 'application data\apple computers' folder to another location

We use roaming profiles and the Application Data folder is stored on a network drive with restricted space (500MB). This has not been a problem in the past but since we've been rolling out iPad's & iPhones, this restriction is becoming a problem as iTunes download's ios updates and stores device backups in 'application data\apple computers' folder (and not in the media library).
Does anyone know how we can move this 'application data\apple computers' folder to another location or force iTunes to store the downloads/updates in the media library (which can be moved)?
Thanks very much in advance for any help.

Move the iTunes Library elsewhere, launch iTunes with the Shift key held down, and point it there.
(60614)

Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

How do I get iPhoto to not copy photos into its own folder, read originals?

I was wondering how you could get iPhoto 6 to 'read' photos from it's original file.
I normally keep my photos in their own folder, separate from the iPhoto file. Now I kind of want to have them all organized nicely in the iPhoto file so I don't have duplicates floating around. I wiped the iPhoto Library (they were duplicates) and as I import them, they copy right back into an 'iPhoto Library' file. I want them to stay in my own folder 'My Photos'.
Is this possible? =S

Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*However, you need to be aware of a number of potential pitfalls using this system.*
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, *I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.*
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, there are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Your choice, obviously, but best to be aware of all the ramifications. By all means post back if you require more info.
Regards
TD

Can't add file to baggage files folder

Hi,
I have a javascript file I'm trying to add to the baggage
files folder. However, for some reason, I can't add it. I'm using
robohelp 6 and roboosource control 3.0. When I try to add the file,
nothing is added to the folder. I was able to add the same JS file
to another project that was created in X5. So I'm unsure what the
prolem is.
I manually added the javascript file to the rhbag.apj file
but it still doesn't seem to recognize that this file is added to
the baggage files folder or project. I'm still getting a javascript
error as if the file is not in the project.
Strangely enough, when I tried to add the javascript file
from the other project's folder, it asked me if I wanted to
overwrite the js file. But it still doesn't appear in the baggage
files folder or in source control.
Any help is appreciated.
thanks
--Brad

Hi Rick
Sorry--I guess my previous response wasn’t clear. I did
physically copy the JS file to the local project folder first. I
didn’t think it would magically appear.
In terms of the .apj file, I edited it—adding
the code for the script from another project’s apj where the
same script is working—and saved it. But it’s still not
adding the js file to the baggage files folder or to source
control. When I view the apj file that’s in source control,
it has the js code in there.
I then tried overwriting the apj with the apj from a project
where the script is working (that’s what I meant by
replacing), but that didn’t work either. To add another
twist, the script runs without errors in preview mode, but not in
the compiled html help.
I’m unsure what’s wrong with this project as this
script is successfully working in other projects and visibly
appears in the other projects’ baggage files folders. I hope
this was a little clearer.
I’m open to any other suggestions.
Any questions, let me know.
Thanks
Brad

Forgot to tick - Add files to itunes media folder

Hi, im new to itunes and have recently downloaded my cd collection to itunes ( 7000 odd tracks worth)
Ive just realised that i never had the "add files to itunes media folder when adding to library" box ticked.
I would like to know if im am still able to add all my music to the itunes media folder now that they are already downloaded and in my library?
I would like to know this because i would like to use some songs in windows movie maker and when i search for the music using wmm, i can find the itunes media folder but there is no music inside.
Can anyone help on this matter ,
Thanks scott

In iTunes parlance a file is consolidated if it is located inside the iTunes Media folder, and by extension unconsolidated if outside the media folder. The option you refer to, if enabled, ensures that all tracks added to the library thereafter are consolidated, though it won't affect tracks that are already part of the library when you make the change.
Having the files consolidated means that iTunes can, if you wish, also update the file and folder names to reflect changes that you make to tags. A fully consolidated library where the media folder is a subfolder of the main iTunes library folder is also portable making it much easier to backup, restore, move or migrate.
You can consolidate your entire library with File > Library > Organise Library > Consoldiate files, or selected files by right-clicking on them and clicking Consolidate files.
tt2

Can't Change, Add or Remove Outlook Contacts Folder in Desktop Software

I’m using version 7.1.0.41 of the BlackBerry Desktop Software. I recently created a new updated PST file in Outlook 2010. When I looked at the BlackBerry Desktop Software Contacts Configuration by going to Organizer, then Contacts – Microsoft Outlook: Configure…, Advanced Options: Advanced: Folders, I saw that the Desktop Software had defaulted to the default Contacts folder in my new Outlook profile. This wasn’t the Contacts Folder I had been using with my BlackBerry Curve 9320, so I chose “Select different contacts to sync”, double-clicked on my new Outlook Profile at the Root Level then selected the Contacts Folder I had used previously.
I found I could not use the Green Add button to add this folder and I couldn’t use the Red Remove button to delete the existing Main Contacts file. If I double-clicked on the Contacts folder which I wanted to use, the correct file path showed under “Select different contacts to sync”. However once I clicked OK and then returned to the Advanced Options, I found that it had reverted back to the original default settings.
I did notice that Outlook’s main Contacts file which I don’t want to use has a “Contacts” icon while the contacts Folder I want to use has only a generic folder icon. Under “My Contacts” in Outlook, however, all my Contacts files have the same icon. If I try to sync now, the Desktop Software wants to add all the contacts from my main Contacts group to my BlackBerry, which I don’t want. This all worked just fine before I updated my Outlook PST file.
Thanks for your help with this.
Solved!
Go to Solution.

I've now resolved the problem. I had an email folder name "Mobile Contacts" which was causing me to use the wrong path. I needed to open the folder with the Contacts icon to get to the next level down where the Contacts folder I wanted to use was.
I couldn't add, remove or delete the folder I was attempting to use because it was actually an email folder, not a contacts folder.

What 'item type' do I use to add action to SCHEDULER CHAIN folder?

I am using SQL Developer version 3.1.06.82
I would like to add a User Defined Extension to a Scheduler CHAIN. I am looking through the Namespace for Version 3.1 at: http://www.oracle.com/webfolder/technetwork/sqldeveloper/3_1/dialogs/index.html. Under the COMMON OBJECT TYPES, I do not see any of the Scheduler items. I was able to use <item type="SCHEDULER"> to add an action to the SCHEDULER folder, but what I really want to do is add an action to a CHAIN.
Does anyone know what type name to use??
Has the Namespace been updated and published somewhere else?
If you have an example, it would be greatly appreciated.
Edited by: 975201 on Feb 28, 2013 8:24 PM

>
I would like to add a User Defined Extension to a Scheduler CHAIN. I am looking through the Namespace for Version 3.1 at: http://www.oracle.com/webfolder/technetwork/sqldeveloper/3_1/dialogs/index.html. Under the COMMON OBJECT TYPES, I do not see any of the Scheduler items. I was able to use <item type="SCHEDULER"> to add an action to the SCHEDULER folder, but what I really want to do is add an action to a CHAIN.
>
Those COMMON OBJECT TYPES are database schema objects so SCHEDULER or CHAIN would not be in those lists.
Did you try "CHAIN" or "SCHEDULER CHAIN"?
I suggest you change your thread subject to match your question and maybe one of the developer team members will notice it.
For example: What 'item type' do I use to add action to SCHEDULER CHAIN folder?

When I updated to Lion, a folder named RamdiskFixer appeared in my Applications folder. What do the applications contained in this folder do?

When I updated to Lion, a folder named RamdiskFixer appeared in my Applications folder. What do the applications contained in this folder do?

Thanks. I am sure you are correct, although I don't recall installing it and I only discovered it after the update to Lion. That is why I thought there was some connection. Anyway, I have deleted the folder and its applications. Thanks again for setting me straight.

Installing Creative Cloud applications from shared windows folder.

Hello.
I got new laptop for work use and I am installing creative cloud on it. However laptop ain't that fast and I am wondering that would it be possible to install creative cloud applications from shared windows folder, since I have downloaded and installed all creative cloud applications on my desktop machine already and laptop is intented for working while not at home.rpr
This would increase installing speed since all those needed files would be available from Local Area Network, which is faster and my broadband and it also would allow hard drive to focus on installing files instead of current simulataneous reading and writing to same hard drive.

Hello.
I got new laptop for work use and I am installing creative cloud on it. However laptop ain't that fast and I am wondering that would it be possible to install creative cloud applications from shared windows folder, since I have downloaded and installed all creative cloud applications on my desktop machine already and laptop is intented for working while not at home.rpr
This would increase installing speed since all those needed files would be available from Local Area Network, which is faster and my broadband and it also would allow hard drive to focus on installing files instead of current simulataneous reading and writing to same hard drive.

How to add applications of Agent-managed-Device

Hello,
we just can´t get the Application-Monitoring get to work. We followed dozens of guides and read hundreds of forum-posts about it but nobody seems to have our problem.
So here´s the thing:
We downloaded/installed the "Application Monitoring" MP.
Klicking on the "Applications" view in this MP, there is no data shown.
We sure know that you first HAVE TO add Applications, but
HOW?
There is no option in Authoring or Administration.
You can´t even select which devices OM should scan for Applications.
Before I forget: We do NOT want to monitor local processes.
First, we got that to work and second, it´s pointless anyway(you can see with your bare eyes if a process is running or not...)
Thanks in advance for your help guys! We are really lost here.
P.S. We´re from Germany, so please excuse spelling-mistakes etc.

Hi,
What sort of monitoring do you want for your application?
APM integrated to SCOM 2012 is only for managed applications (.NET and Java), and it also suits well (and actually is intended for this purpose) for your custom apps monitoring, not only for Microsoft apps as you wrote. But these should be .NET/Java-stack
based apps.
Except of APM SCOM provides more other monitoring capabilities, some of which could be used to monitor third-party unmanaged apps:
- Web Application Availability Monitoring
http://technet.microsoft.com/en-us/library/hh881883.aspx
- Web Application Transaction Monitoring
http://technet.microsoft.com/en-us/library/hh457553.aspx
- GSM Monitoring
http://blogs.technet.com/b/momteam/archive/2012/06/19/global-service-monitor-for-system-center-2012-observing-application-availability-from-an-outside-in-perspective.aspx
- Windows Service Monitoring
http://technet.microsoft.com/en-us/library/hh457595.aspx
- Process Monitoring
http://technet.microsoft.com/en-us/library/hh457551.aspx
- Monitoring capabilities provided by specific MPs (for example, SharePoint 2010 MP, BizTalk MP, etc)
http://unofficialsystemcentercatalog.wordpress.com/2012/12/27/operations-manager-is-there-a-management-pack-for/
- etc
As you see SCOM brings much, but APM, the current forum branch is dedicated to, is only for managed code apps, because it works as profiling wrapping the calls of your application. The profiling is not applicable to unmanaged (for example, plain C++)
code.
Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/)

How can i add form of my own to "SAPM07DR"

i been asked to add form develop by me to the standart program "SAPM07DR" .
this task came from the need of the implementation
of the "material management" , assign forms and program.
now i get the output "ZWE4" ,
and i want to assign form of my own ,
i tried to add smart form but i get message
"Errors occurred while processing output"
so I want to try layout with standard program "SAPM07DR" .
how can i add form of my own to this program

First, you must copy this program to your own program with "ZSAPM07DR" then copy the include program where the routine pass through the program
example: entry_we03 -> from include M07DRENT and M07DRAUS
         change this include to ZM07DRENT and ZM07DRAUS
The next step is binding your form in the program.
what forms do you use ? Sapscript or Smartforms ?
in this Program already used Sapscript. You can See there is Open_Form Function in that Program.
I suggest you to Bind Smartforms.
IF you use smartforms, Remark All Statement from
"PERFORM open_form_sammel." to "PERFORM close_form." before endform
that perform including in M07DRAUS -> FORM lesen_wes USING objky lgortsplit.
after that put this program to replace the remark :
data : FMNAME type RS38L_FNAM.
DATA: ls_control_param      TYPE ssfctrlop.
set preview parameters
      MOVE 'X' TO ls_control_param-no_dialog.
      MOVE 'X' TO ls_control_param-preview.
      MOVE 'PRINTER' TO ls_control_param-device.
*break-point.
*****Print SmartForms
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          FORMNAME           = TNAPR-SFORM
        IMPORTING
          FM_NAME            = FMNAME
        EXCEPTIONS
          NO_FORM            = 1
          NO_FUNCTION_MODULE = 2
          OTHERS             = 3.
     CALL FUNCTION FMNAME
     EXPORTING
         control_parameters   = ls_control_param
     TABLES
         traptab           = traptab
     EXCEPTIONS
         formatting_error = 1
         internal_error   = 2
         send_error       = 3.
     if sy-subrc NE 0.
*******message 'Error' type 'S'.
     endif.
*******End Smartforms
Hope This Help...

Moving original files when you use your own folder structure

I currently maintain my own folder structure (on the HDD) for Aperture to read files from (rather than allow it to create its own complicated structure). Based on what i have seen so far, I understand that Aperture links its project with the HDD folder from where you import images.
In an instance, where I moved my file from the HDD folder structure, the image still appears in Aperture, but with a yellow question mark, and it does not allow me to edit it. Here I am assuming that since i moved the file from its HDD folder, Aperture is no longer able to locate it. Hence, I have the following queries about moving/ deleting files from my HDD:
Q1: If I want to move a file from one HDD folder to another, how do I do so without losing its link in Aperture
Q2: How do I completely delete a file from my HDD using Aperture? Assume here that I have imported it into Aperture but haven't made any changes to it, which means that I have only one version, the master version. Currently, when I delete it in Aperture using 'Delete version', I notice that the file still exists in the HDD folder). Is it that the only way to delete a file is to do so first from Aperture and then use Finder to delete it from the HDD folder? If not, whats the best way.
Q3: There is another scenario for Q2 - If I have made changes to a file after importing it in Aperture, there are now two versions, master version and edited version. If I want to delete both these files, whats the best way to do so.

OK let's take a step back here. In your previous post you wrote asking how to move a file from one folder on your HD to another so that Aperture wouldn't loose track of it. And for that we answered to use File->Relocate Masters. The last two questions concerned deleting images from both Aperture and the HD. And we covered that.
Now you write:
f i want to move my master and version files from one project to another (and the corresponding master files too), i should first move the master files using File> Relocate master and then drag-drop the versions from within Aperture. (I usually maintain similar names for my HDD folders and corresponding projects in Aperture, hence if i move the master, then it makes sense to move the versions too).
Now you're bringing in moving images in Aperture from one project to another. What you are saying is correct but bear in mind:
The library structure inside Aperture is totally independent of the file structure you use to store referenced masters on the HD outside of Aperture.
Now It is possible to have one mimic the other as you seem to be doing but for all intents and purposes Aperture doesn't care at all how the external file structure appears as long as Aperture knows were the masters are.
So if you want to move masters INSIDE of Aperture from one project to another you can simply drag the visible image from the source project to the destination project. All versions will come along, versions are coupled to their masters and as such can't be moved independently. Any versions in Albums will continue to point to the master they came from.
Now if you want to move the master files EXTERNAL to Aperture you need to use the File->Relocate Master command so that Aperture will know were the files are.
Note: there is another command File->Locate Referenced Files that is used to connect Aperture to its referenced masters if the connection between the two is somehow broken. As for example what would happen if you moved the referenced masters using the finder rather then the Aperture command.
So you should be good to go, just remember that the two structures, Aperture library and referenced files, are independent and don't really need to be kept in sync. And by doing this you're making extra work for yourself that isn't really necessary.
regards

Add application to "My Own" folder

Similar Messages

Maybe you are looking for