Add approver/ reviewer-data not coming up.

Hi All
One more question-we are in SRM4.0
We managed to enable the add approver and add reviewer tabs under approval.
Now when we try to add approver or reviewer the system does not fetch any data. Do we need to maintain a separate table of approvers and reviewers and link a program so that when user clicks on the tab, the data is fetched from the table....or there is some other way out.
Regards
Ashish

Ashish,
I am having a similar kind of issue like what you had months back. The 'Add approver' and 'Add reviewer' buttons are disabled on the shopping cart status overview. I have the approval task TS10008126 as general task (Not general fowarding allowed). Also the SAP provided BADI SAP_CHNG_AGNT_ALLOW is active in the system. But for some reason the add approver/reviewer buttons are greyed out.
How did you resolve your issue? Appreciate your help
Thanks
Sridhar Jami

Similar Messages

SLED date not coming automatically

hi,
As per my client requirement they will enter the production date only in goods receipt and SLED date have to come automatically at GR time. I already maintain the Total shelf life and minimum remaining shelf life in material master.i activated SLED for plant and movement type but SLED date not coming automatically.
If i l enter SLED date more than my Total shelf life period , then system automatically updating the total shelf life period in batch master record. how to avoid this issue? i want whatever shelf life entered in GR should have to recorded not system calculated based on master data(Total-shelf life)
Thanks
Muthuraman.D

Dear all,
i am using internal batch numbers at the time of goods receipt provide me some solution for above issue?.....
Thanks
Muthuraman.D
Edited by: muthuraman d on Nov 7, 2011 12:18 AM

Add Approver/Reviewer

Hi,
When we create SC in srm we get an option to add approver/ reviwer.
Please let me know to do so, do we need to activate any workflow as ad hoc approval workflow etc...
How the approver and reviewer gets selected in the approval flow based on which logic.
Thanks,
Manu

Hi,
if you want BY Default the add approver/reviewer in the SC itself then you have add the logic in the workflow based on the logic (for example if you getting the approver/reviewer from the Z table add the approver/reviewer there itself)
So when are creating the SC the approver /reviewer will appear in the workflow
The Basic function of ADD APPROVER/REVIEWER is an adhoc only .when you feel for this SC if you want to add an approver you can add the approver before the SC is saved. Incase of reviewer is only for information that the SC is created.
hope you understand the functionality of ADD APPROVER/REVIEWER
Regards
G.Ganesh Kumar

Add Approver / Reviewer Button

Hello Experts - I did search the forum before posting this note and only found information that I already knew about this. The add approver, add reviewer button is displayed and works in our QA region but not in Production.
I compared the source code by right clicking on a req and found difference's between the HTML in the two regions. Also, dev shows bbpsc01/99/saplbbp_1000.html and prod bbpsc02/99/saplbbp_2000.html shows BBP_CHNG_AGNT_ALLOW badi is not active in either region and yet add approver / add reviewer works in QA. I badi is in se18 in both regions, not se19.
I ran a compare of the code in both regions for bbpsc01/99/saplbbp_sc_ui_its_100, 1000, 110, 120, 150, 1000 and 2000. No difference's found between any of them
in the two regions. I have also compared the transports in the two regions.
Any ideas, suggestions would be appreciated. Thank you.

Hi Jolee,
Did u find a solution to the issue ? Please reply back.
Best regards,
Sambit

Cannot add approver / reviewer

Hi All
We are on SRM 5.0 SRM Server 5.5.
When we try to add approver or reviewer the add approver / add review icons are greyed out for both shopping carts and PO's.
When we change the BBP_WFL_SECURITY to any level in personalisation this has no effect.
am I missing some config / other settings?
thanks
Daniel

Hi,
See if the BADI BBP_CHNG_AGNT_ALLOW is implemented in SE18.If there is any active implementation for this BADI,deactivate it.
Also see the foll notes:
Note 888560 - Not able to add approvers in table approval preview
Note 990982 - Shopping cart ad approvers possible in display mode
Note 999528 - Adding Ad Hoc Approver fails due to comit error
BR,
Disha.
Do reward points for useful answers.

Data not coming in cube...

Hi,
I have loaded data in ODS but when loading the data from this ODS to cube it is not fetching any data in the cube. I have created the DTP to transfer data from ODS. but no data is coming in cube.
Any mistake I have to correct? or any setting I have to check?
Please let me know.
Thanks,
Jeetu

Hi Ravi,
I presed execute button from DTP in schedule tab.
It is showing DTP as green , no error is there.
But no records are loaded from ODS through DTP.
Thanks,
jeetu

Data not coming from DOE to Mobile After defining Rule for device attribute

Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
Abhishek

Hi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w

Data Not coming From DSO to Cube

Hi All,
I have data in DSO. When i run the DTP , request status is green.
Now when i go to cube and see the data the request has came but data has not transferred .....
The Request Status is green in cube but data is not cuming....
No transferred data.
How can bring data in cube..??
Regards,
Rohit

Hi,
When you loaded the DSO......after that are you loading the cube for the first time?If so .....and still data is not coming..then check if the last loaded request somehow got deleted from the DSO....
If after loading the DSO....you have already loaded the cube...and this is the second time you are loading the cube.........then obviously it will pick 0 records...........since delta DTP always picks the fresh new request..........if there is no new request in the source .......then it will pick 0 records.......
Also both the cased are not working.........then check the End routine or Start routine.if any.......
Thanks and Regards,
Debjani.......

Date not coming in proper format after applying formula in Update Rules

Hi All,
I have two time characteristics "Goods Issue date" and "Goods Return date" and One key figure "No. of days elapsed".
The key figure "number of days elapsed" is being calculated by taking difference of "goods issue date" from "goods return date", but the format for that is not coming proper for example:-
Goods Issue Date is 21.06.2006
Goods Return Date is 22.08.2006
According to formula No. of days elapsed shud be 62
but it is coming as 04.03.0001.
Please help as it is a urgent requirement.
Much Appreciated,
Sunil Morwal.

Dear Sunil,
Kindly check if creating 2 new KeyFigures (DATE) will be of help by assigning the said "two time characteristics" values.
From these 2 new KYFs, apply your formula..
Hope this helps..
Thanks.
Message was edited by: Arnold Padiernos

Data not coming to BW from SAP system from last 7 days....please help

Hi Experts,
I am monitoring the process chain from last 7-8 days but no data is coming to BW from SAP R/3 . then i checked in SAP R/3 system in RSA7 there weree no queues it was empty. then i checked LBWQ and some MCEX03,MCEX11,MCEX13,MCEX04 were there and i double clicked on one of them then i saw the status in queue as NOSEND . we have used QUEUED DELTA as update mode in LBWE. now i want to bring data for last 7-8 days in BW system. please can anyone provide me the detail steps for this as it is our PRODUCTION system. please provide the steps...!!!!

Hi,
Go to SM37 in your R/3 environment and check if there are any jobs starting with LIS* in released status. This is the job which would push the entries from LBWQ to RSA7 for specific applications. If there are no jobs, this is the reason for your problem.
If you do find any job there, then double click on them to check their frequency. Generally it should be hourly.
If there is no such job, then go to LBWE. For each of your applications, click on Job Control and maintain the job scheduling. In the start date, maintain it as periodic job. Then simply schedule teh jobs. Once the jobs are scheduled, after every run of them, LBWQ would get cleared.
Then it would get picked from RSA7 by the BI job.
Edited by: Rahul K Rai on Dec 8, 2010 4:00 PM

Data not coming in proper tabular format - BICS

Hi friends,
I tried connecting Xcelsius with BW(BEX query) where I succeeded to connect both system and was able to see objects coming through BEX query into Xcelsius connection defination TAB. When I go to its output values, it contains "cross-tab Data". I clicked on it and map it in excel. My BEX query has only two things one is Material (Char) and other is Amount(Key Figure). So I mapped it with two colums of excel of Xelsius and finally mapped those two colums with Spreadsheet component of Xcelsius to view the things precisely as it is coming.
But the problem is when I see the output, though it is showing the data but the header of the spreadsheet is bit scattered.As in,
it should display like:
Material.....|...Amount..|
Mat1..........| 5000........|
Mat2..........| 2000........|
But it is showing something like
Key Figures...|...Amount....|
Material.........................|...........................
Mat1..............................| 5000........|
Mat2..............................| 2000........|
Overall Result...............|..7000.......|
You can see the second table contains data which is really different from the format I am looking for. What could be the reason for this? Anybody can guide me..
Thanks alot!!

Hi kgaurav2k1, if you don´t want to see the "Overall Result" you need to change the query definition to not show total (from Bex Query Designer). Regarding the header, I´ve never could change it, and decided to use the data from the 3rd row. It is the format for a cross-tab header.
Hope I help.
Regards,
Liliana

Data not coming in web report

Hi,
I have created a multiprovider based on two cubes...have done neccessary identification and selection as well. But the query->web report is not displaying data from one cube. It only displays data for char n kf for one cube and the char n kf for other cube dosent show any data. Also, there are no filters set in the query and data is also available in both the cubes.
Can anyone please suggest what must be going wrong. Your help will be surely rewarded.
Regards,
Minal

but check if there are any global filters or hidden filters in query used for web reporting
i donot want any reward

Data not coming in AFRU table for 21.05.10 for sometime

Could you please tell me that why does this happen?
For a particular date i.e. for 21.05.10, in the afru table the data was not there, it was saying "No Entries for that date" (in se16). Actually there is a z-report which was not showing the per ton draw calculation for that particular date. But for the other dates, it was showing fine.
Infact, when in the afru table it was showing "No Table Entries found for that particular date", parallely in the z-report it was showing a Default value "341" for all items for 21.05.10.
But just after 10 mins. the data got updated and its showing fine.
What can be the problem? Coz its happenning often, and we the abapers are getting tight scold. But the program is correct. I have checked.
Please Suggest.
Saheli

Saheli,
You need to let us know how you program is designed, if the data is fetched from AFRU table and in AFRU table there were no entries for a posting date, how can you get a value in your custom report?
Please explain what your report does, so that we can i think and suggest as what might be going wrong.
Regards,
Prasobh

Messages/Data not coming to Quality XI System

Dear Xi experts,
Scenario : RFC to IDOC
When i execute the RFC program in SAP system based on the variant, i am not getting any data in my Quality XI system.
I checked the connections (RFC Parameters) from SAP and XI quality...looks it's working fine.
Regards,
Ramana Kumar. A

Hi,
Never delete the messages in SMQ2 - this will not sort out your problem.
If your messages are reaching the queue in the application system (ie. can be seen in SMQ2) your problem is the QIN scheduler is not running. This transfers the messages from the application queue to the XI system.
This is something Basis can help you with.
Kind regards
Colin.

DATA not coming properly

Hi ,
I have a customized report which uses the logical databse PSJ. It has project, wbs element(prps-posid) in the selection screen. When I give input to the project , the output is coming properly with the field(WBS element), but when I give the output WBS element as input in the field , it is retrieving some more data . I went into debugging and found that while retrieving posid from prps table , it is retrieving the value '############' due to which the output has more than the records that should be . Anyone has come across this scenario, please reply .
Thanks in advance.

I assume that the change is present in the PSA. If so is it just one field that is changing or multiple fields. ?
Also make sure the PSA is empty before loading.
Asif

Add approver/ reviewer-data not coming up.

Similar Messages

Maybe you are looking for