ADD approver when WS14000109 is active.

Hey,
I have a special requirement, to add an additional approver in the shopping cart.
WS14000109 is active and working fine.
The buttons ADD APPROVER & ADD REVIEWER are existing on the screen, but not enabled.
Tried changing the security settings (0/1/2/3/4) no luck..
I have read through the posts here ......nothing works.
Did anyone resolve this.
I donot want to implement N- Step BADI...workflow.
regs

Hi,
Work flow WS14000109 which is activated in your system is a work flow
"Approval n-step over Value Limit".
In this work flow no "Adhoc Anchor" step is configuared that is why ADD approval & Add reviewer functionality is missing .
If you analyze the Workflow WS10000031 which is two step approval standard workflow in workflow builder you will find that Adhoc Anchor step.
I hope this will clarify your doubt. Do remember to award points

Similar Messages

Add approver when the SC is in Awaiting approval

Hi SDN,
we are using SRM 5.5 system.
When the SC is created the in the BADI - BBP_WFL_APPROV_BADI we are finding the manger of the user and sending workflow to that mangaer.
Up to this eery thing is working fine.
But when the SC creater wants to chnage the Approver name in Approver Preview (Add approver) when the SC is in Awaiting approval.
System is allowing us to add APprover here but when i Save the SC system calling the BADI BBP_WFL_APPROV_BADI and over righting that manger name with the original manger not with added manger.
Please let me know.
Thanks
Naresh

Once i selected the add approver i can't see this value or capture in any badi.
Can any one know where can i get the added approver details before saving the shopping cart
that mean at run time.

Buyer not able to add Approver

Hi all,
I have an issue where buyers are not able to ADD APPROVER,When the completion workflow starts the cart is in buyer ,where the ADD APPROVER button is enabled, while clicking ADD approver button does not perform any action.Could anybody advice me in this regard?. Whats the technicality behind it while clicking ADD APPROVER button?
Thanks
sibi

Hi CK,
Thanks for your Reply. Where i need to check the status.Could you please explain me?.
My issue is ,Buyer Not able to ADD APPROVER during completion workflow(WS14000044).
ADD APPROVER button is enabled , but when i click add approver button no action performed,
I keep all the relevant task as general task in OOCU transaction.
Scenario 1 : Requestor can able to add approver before the cart moves to buyer.
Scenario 2 : After buyer assign the source of supply cart back to requestor,where once again
                  requestor able to add approver.
Scenario 3: Based on the approval matrix ,approver are listed in the approval workflow where all the
                 approvers can able to add approver.
My issue here is : During the completion workflow the cart is in buyer hand where he is not able to
                           add approver- but still add approver button is enabled.
Appreciate all form of advice.
Thanks,
sibi

How do you add a class in fluid grid navigation menu to change the background and link color when page is active?

When i try to add a class to the active page to have it distinguished when a visitor is on, in the class section it only has other options and not one for "active"

See this link:
Making a persistent page indicator on site wide CSS Menus
Nancy O.

Add Approver - applet performance when 'Add here' pressed

Hi -
We have recently upgraded to SRM 5.0 (classic) and are noticing that the Add hoc approver functionality is quite slow when using the graphical view.
Steps:
- for a sc to be approved, go to Approval Preview
- click 'Add Approver'
- on any of the 'Add here' entries, press
The perofmance problem is when the 'Add here' is pressed - for the graphical view, i.e. using the applet, the performance can take 15 sec. and sometimes longer. But, if in table view, the performance is o.k. at about 5 sec.
This leads me to believe that the problem is with the applet (as opposed to for example the agent assignment causing problems, as is the same agent assignment with both ways).
Just wondering if anyone is noticing the same issue - I have found nothing in OSS nor in this forum.
Thanks,
Keith

Keith,
We are also in the process of implmenting SRM5.5/EBP5.0.
Just throwing out some ideas...since the graphical view is using a Jave applet could cause be due tp the jre version? Parhaps upgrading ot he lates jre will solve the problem.
Thanks,
PS. Where in Canada are you?

Add Approver button disabled for PO in sap srm when GR and IR are already posted

Hello Gurus,
One of my user has edited an old PO for which the GR and IR has already been posted in backend. Now the reason for editing was to change the expected value for 3 item and he changed the value the approver is still blank as for old PO's there was no approval required but later on the whole scenario changed and based on total value the approvers are decided now. But for this PO still its not showing the appovers and also the add approver button is disabled. Is there any way to enable the Add approver button. Also please let me know whether addition of approver is allowed after the GR and IR are posted in backend.
Thanks
Gaurav Gautam

Solved.
In Control Actions -> Configure Control of Actions on Header Level, it's not neccessary put the subtype equal to 0.

Add approver/ reviewer-data not coming up.

Hi All
One more question-we are in SRM4.0
We managed to enable the add approver and add reviewer tabs under approval.
Now when we try to add approver or reviewer the system does not fetch any data. Do we need to maintain a separate table of approvers and reviewers and link a program so that when user clicks on the tab, the data is fetched from the table....or there is some other way out.
Regards
Ashish

Ashish,
I am having a similar kind of issue like what you had months back. The 'Add approver' and 'Add reviewer' buttons are disabled on the shopping cart status overview. I have the approval task TS10008126 as general task (Not general fowarding allowed). Also the SAP provided BADI SAP_CHNG_AGNT_ALLOW is active in the system. But for some reason the add approver/reviewer buttons are greyed out.
How did you resolve your issue? Appreciate your help
Thanks
Sridhar Jami

Cannot add approver / reviewer

Hi All
We are on SRM 5.0 SRM Server 5.5.
When we try to add approver or reviewer the add approver / add review icons are greyed out for both shopping carts and PO's.
When we change the BBP_WFL_SECURITY to any level in personalisation this has no effect.
am I missing some config / other settings?
thanks
Daniel

Hi,
See if the BADI BBP_CHNG_AGNT_ALLOW is implemented in SE18.If there is any active implementation for this BADI,deactivate it.
Also see the foll notes:
Note 888560 - Not able to add approvers in table approval preview
Note 990982 - Shopping cart ad approvers possible in display mode
Note 999528 - Adding Ad Hoc Approver fails due to comit error
BR,
Disha.
Do reward points for useful answers.

SRM 7.0 'Add Approver' button disabled after rejection

Hi Experts,
I'm working on SRM 7.0(BRF) RFx workflow. I have configured the process level schema and the acceptance by contact person in customizing. When any of the approver rejects the document, it comes back to the creator which is right. But i see the 'Add Approver' button as disabled. But while creating a new document it is showing the 'Add Approver' button, only after rejection, the creator is seeing the button as disabled. Is it the standard behaviour in SRM7.0 ?
Can you guys share your thoughts on this..
Thanks
Ram

Hi,
Please check the note 1378094.
https://service.sap.com/sap/support/notes/1378094
Regards,
Masa

Add Approver button disabled in SRM Shopping cart

Hello,
We have activated 2 level PC workflow. However we are facing issue that Add Approver button is not enabled.
Could anyone please advise.
Thank you
Ritesh

Hi Ritesh,
On the face of it,I have couple of points for you to check it out.
1.
Please check the agent assignment at the header level of the workflow.
Go to transaction PFTC -> Select workflow template -> 14000133 (or
whichever workflow you are using) -> Display -> Additional data ->
Agent Assignment -> Maintain -> Attributes -> Select radio button
'General Task' .. or instead of everybody being able to make changes
you can set the agent assignment of the workflow at role level.
Please also review note 581191.
2.Check if this button is not visible or not for all the roles.
3.Check any portal enhancements or Metadata config to make it display.
Thanks
Balaji

Add Approver / Reviewer Button

Hello Experts - I did search the forum before posting this note and only found information that I already knew about this. The add approver, add reviewer button is displayed and works in our QA region but not in Production.
I compared the source code by right clicking on a req and found difference's between the HTML in the two regions. Also, dev shows bbpsc01/99/saplbbp_1000.html and prod bbpsc02/99/saplbbp_2000.html shows BBP_CHNG_AGNT_ALLOW badi is not active in either region and yet add approver / add reviewer works in QA. I badi is in se18 in both regions, not se19.
I ran a compare of the code in both regions for bbpsc01/99/saplbbp_sc_ui_its_100, 1000, 110, 120, 150, 1000 and 2000. No difference's found between any of them
in the two regions. I have also compared the transports in the two regions.
Any ideas, suggestions would be appreciated. Thank you.

Hi Jolee,
Did u find a solution to the issue ? Please reply back.
Best regards,
Sambit

We are Not able to Add, approved A/P invoice - Error - Tax code Missing

Dear Experts,
In A/P -> A/P service Invoice
When We are going to Add Approved Invoice ,system can not allow . This
invoice is go through a approval process ,system can not allow to change any
of document row during approval process or after approval process.
we are unable to add tax or remove line item after approval.
We are Not able to Add, approved A/P invoice - Error - Tax code Missing
[A/p Invoice Row -Tax code] Line 3 [Message 3513-14]
I think ,It should allow the system to edit the row tax or amount after or during
approval process

Don't worry,AP invoice is not get posted,it will be saved as draft only,
Default tax code for purchase documents using tax code determination.
Create new ap invoice with tax code and send it for approval.
Orginator should ensure all mandatory fields in document are entered correctly before
sending it for approval.

Add Approver/ Rewiever error

Hi Gurus,
We have currently upgraded EBP 4.0 version from SP5 to SP11.
When clicking on the Add Approver button, getting pop up "No Possible Processor Found for approval task. Inform system admin" and not fetching any list of agents.
When clicking on the Add Reviewer, it is not bringing any pop up or other error/warning screen.
Please advice. Thanks in advance.
Regards,
Gopesh

Hi All,
This BADI deactivation started throwing other error message class BBP_WFL and no 038.
This problem has been resolved by changing the include LBBP_PDH_WFLF02 and function module BBP_PDH_WFL_APP_ASSIGNTYPE_GET.
Thanks everybody for your suggestions.
Regards,
Gopesh

Add Approver/Reviewer

Hi,
When we create SC in srm we get an option to add approver/ reviwer.
Please let me know to do so, do we need to activate any workflow as ad hoc approval workflow etc...
How the approver and reviewer gets selected in the approval flow based on which logic.
Thanks,
Manu

Hi,
if you want BY Default the add approver/reviewer in the SC itself then you have add the logic in the workflow based on the logic (for example if you getting the approver/reviewer from the Z table add the approver/reviewer there itself)
So when are creating the SC the approver /reviewer will appear in the workflow
The Basic function of ADD APPROVER/REVIEWER is an adhoc only .when you feel for this SC if you want to add an approver you can add the approver before the SC is saved. Incase of reviewer is only for information that the SC is created.
hope you understand the functionality of ADD APPROVER/REVIEWER
Regards
G.Ganesh Kumar

Add Approver restricted to Approvers only

We are using n step approval in ECS. I restricted approval task TS14508044 to no general forwarding allowed and asigned Approver Role.
But nevertheless when user during shopping cart creation want to add or change an approver they can assign any user. I would have expected that the approvers that can be added or changed would be restricted to the users that have the approver role.
Where can I restrict this
Rgds.
Dieter

Hi,
See solution in the foll threads:
Use of BAdi BBP_CHNG_AGNT_GET with N Step Item Based WF
Re: Shopping Cart Add Approver option
Re: Replacing approver
BR,
Disha

ADD approver when WS14000109 is active.

Similar Messages

Maybe you are looking for