Add ASAP Implementation Roadmap v3.8 for SolMan
Hi Experts !
I want to add ASAP Implementation Roadmaps v3.8 in Solution Manager, and have access to the RMMAIN.
I have not found info, but I understand that it should be possible.
Someone could help me?
Thanks in advance
Hello Gustavo,
I hink that you are mistaken. SolMan 7.0 uses ST-ICO 150-700 as component. As far as I know there is no such 160-700. I think what you mean it is the LEVEL of that component wich is 15, 16 or 17. Probably the new roadmap ASAP Implementation is already available in STICO 150-700 level 16 or 17.
Can you please check the status of your components in your SolMan? Go to System->status and the press the "lupita" and check ST-ICO LEVEL.
Regards
Esteban
Similar Messages
-
ASAP Implementation Roadmap for SAP Exchange Infrastructure
Does anyone know if the "ASAP Implementation Roadmap for SAP Exchange Infrastructure" is still available somewhere?
I'm looking for templates for documenting XI flows.
thanks!hi,
try this link:
https://websmp109.sap-ag.de/~sapidb/011000358700004919702004E
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ -
Is there a link to download the complete latest XI ASAP Roadmap?
There's a link on the following page, however, the link no longer works:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/asap implementation roadmap for sap exchange infrastructure.htm
Thanks in advance,
MattMatt,
This is the working link:
http://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_XI/index.htm
for online roadmap, and the link below is downloadable:
http://service.sap.com/~sapidb/011000358700004874282004E
Best regards,
Alwin
Message was edited by: Alwin Piest -
ASAP Implementation using SOLMAN
HI All,
Can you please guide me if we can implement sap using ASAP methodology in SOLMAN?
In other words can solman be a substitue for ASAP tools and download from CD?Or there is no substitute to ASAP software?
Also guide me if solman can become a part of ASAP methodology if entire ASAP methodology is not possible using SOLMAN and in what phase of ASAP nethodology implementation SOLMAN comes in picture?
Thanks.Hello,
Solution Manager has the similar functionality as ASAP, though instead of CD based it is Server Based set of tools and it is modern, while ASAP is old.
You should look at SAP Methodologies at this link:
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000724820&_SCENARIO=01100035870000000202&
Also look at RUN SAP and notice you can use ASAP Roadmaps : https://websmp102.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
Here is a link to run SAP Roadmaps: https://websmp107.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
Additionally this issue has already been discussed in thread: Difference between Solution manager and ASAP
Regards,
Paul -
SAP ASUG Methodology rel 7.1 roadmap = Is it available for SolMan?
I was looking at SAP ASUG Methodology rel 7.1 roadmap; and was interested to know
a) Is it available for SolMan yet?
b) If yes, how do I download to our SolMan instance? I presume this is via the ST-ICO download; but just wish to check for confirmations
Many thanks in advance for your feedback.Look at this Deamen...
Re: Functional Specification Template in ASAP Methodology 7.0
Posted: Aug 16, 2010 12:39 AM in response to: Mohammad Mazher... Reply
You need to apply latest Solution Manager stacks (today 24) so that you will be able to have it in the transaction RMMAIN. The component where the new roadmap is delivered is the ST-ICO. You need to ask your basis guy to update your SolMan.
Regards
Esteban Hartzstein -
Hi
I tried to download the XI implementation roadmap from service marketplace. But the link doesn't seem to work. Can anybody who has that, forward it to my email please?
My email is [email protected]
Thanks a lot in advance
SudheerTry this
ASAP roadmaps for XI:
https://websmp102.sap-ag.de/roadmaps
Here select the 1 for XI
Regards,
Prateek -
Portal Implementation Roadmap not available
Hi all,
Can anybody let me know why the below link for Portal Implementation Roadmap is not available.
<a href="https://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_EP/Enterprise%20Portal/index.htm">https://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_EP/Enterprise%20Portal/index.htm</a>
kindly let me know the documents available for the SAP EP-ASAP.
eagerly waiting for replies.
Regards,
VenkatHi Rizwan,
The Roadmap which is available @ SMP you have download and save in your local PC. Then you can access the documentation by the start page inside one folder , which will be accessed on browser.
Again that is getting accessed form ur local system, u cant access over web.
Priyabrata -
How to add a new universe in population for Predictive Analysis
Post Author: izhar
CA Forum: Performance Management and Dashboards
Hi all members I am working on BOXI R2, SP2 I have to ask that, How to add a new universe in population for "Predictive Analysis". Currently i can only view universe of "Direct Customers and Direct Products"
Any member please help me hereRegards IzharHi Anne,
It really depends on how your portal is set up. And there are 101 ways this could have been done.
I've used the Home Page Framework as an easy to define and extend framework to show applications. I've used it both for ESS and MSS, Using the HPF requires that an application has an iView in the portal.
The main point to be made here is that this is not a Web Dynpro ABAP specific question - but rather one about MSS portal implementation - you would probably be better posting a question in either one of the ESS/MSS or Portal forums.
As it is not a WDA specific question, I'd ask that you kindly close this thread and reopen in another forum.
Thanks for your understanding, it would be nice to be able to answer all questions in all forums (perhaps with some sort of tagging system) but currently forum rules are that questions must be specific to the forum posted.
Thanks,
Chris -
Error while updating SP's for Solman
Hello ,
I am updating the SP's for Solman. and I have come across these 3 errors, how do I resolve them
1.Function RSDDTREX_INDEX_CHECK (RSDDTREX_CHECK 01) does not fit into the existing function group ((RSDDTREX 06))
2.Table RSBGUI_R_TEST is not in nametab.
3. Phase ADDON_CONFLICTS_?: Explanation of Errors
Conflicts were found between the Support Packages that you want to
import and the Add-Ons installed in the system. To guarantee the
consistency of your system, the import is interrupted until all Conflict
Resolution Transports (CRTs) for the listed Support Packages are
included in the queue.
To include the CRTs in the queue, proceed as follows:
#NAME?
- Leave this screen by choosing 'Cancel' (F12).
#NAME?
Service Marketplace or request them from your Add-On supplier.
#NAME?
#NAME?
the beginning.
If the problem involves an SAP Add-On, see SAP Note 53902, which tells
you which CRTs resolve the conflicts. Otherwise contact the supplier of
your Add-On for details on how to proceed.
The following contains a table of Support Packages for each Add-On for
which conflicts were detected. The column 'Information on the Conflict
Resolution' specifies how you can resolve a conflict. For more
information, select the corresponding 'Information for the Conflict
Resolution'.
Note:
You are importing the queue in the test scenario. As this scenario is
only used for performing analyses, you can skip the errors and continue
the import in the next phase.
In the standard scenario, however, note that the errors have to be
rectified before importing can be continued in the next phase.
Conflicts Between Add-On ST-SER 700_2006_1 and Support Packages
Component Release Support Package Information onConflict Resolution
ST 400 SAPKITL425 CRT: DUMMY
Thanks DruvaHi there,
Thank you cauz I did get some lead into the issue with your response.
I missed on some ST's which did give me a CRT error and I downloaded them and the problem is fixed now.
I have another question in my new post please have a look at it.
I am closing this thread.
Thank you
Druva -
Dear all,
I have to develop a BW Implementation Roadmap for a BI Project. Can anyone give me materials about it?
For example,
Preparation phase:
Purpose
Task1
Task2
Blueprint Phase:
Purpose
Task1
Task2
Thank you in advance.Hi check this link for useful BW implementation docs
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
hope it helps -
How to implement the Tax Data for Material Master IN MDM
Hello Experts,
The MDM 7.1 standard business content does not ship the content required for TAX data implementation. We need to include this however for Material/Vendor/Customer.
We have alraedy tried the approach of a multivalued lookup table for TAX fileds (Plant,Country,Tax Type, Tax Category, Tax Classfn) and linked it to the Sales DAta Qualified Table.
but this does not satisfy the interdependencies of SAP ERP i.e Sales Org-> Distribution Channel-> Plant-> Departure Country-> Tax Type-> Tax classification. We intend to implement this same relation in MDM.
Kindly guide as to what would be the right approach. Can a qulalified lookup for Tax data be helpful for this scenario?
Also can anyone secify the correct table or T-Code where we can find this entire dependency in ECC?
Thanks in advance,
Elizabeth.Hi Elizabeth, hi Shiv,
as long as you're using MDM for consolidation and harmonization only, you could add the tax information. As for customers (for example), you maintain tax indicators as a child of the sales area. This means for MDM that you need to include the tax indicators in the sales data tuple. As tax indicators are repeatable records, you need to create a nested tuple for that.
But as Shiv has correctly mentioned, the tax information itself is quite complex in regards to which tax information must be maintained depending on e.g. the country and/or sales area. In MDM it is hardly possible to predefine any mandatory values like it is possible in ERP. So if you plan a central creation of data, you'll most probably have to invest a lot into the correct validations to ensure that you create correct data. Still it needs to be closely investigated if you can do this with the MDM functionality or if you need some external API programming to do the job.
Best regards
Michael -
Revision: 10240
Author: [email protected]
Date: 2009-09-14 11:36:09 -0700 (Mon, 14 Sep 2009)
Log Message:
Add validateClient API to the MessageBroker for use in subclases
to filter clients. Add a noop implementation.
If validateClient throws an exception, return 403 Forbidden to
client for the request.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java -
How may implementations can we have for a BaDI?
How may implementations can we have for a BaDI?
if BADI check Multi-USE , then u can
Multiple-Use Business Add-Ins
You can differentiate between single-use and multiple use Business Add-Ins. The distinction is based on the procedure or event character of an enhancement. In the first case, the program waits for the enhancement to return something, usually a return code. A typical example could be a benefit calculation in HR. Depending on the implementation, alternative calculations can be executed. With multiple use add-ins, an event that may be of interest to other components is processed in program flow. Any number of components could use this event as a hook to hang their own additional actions on to.
In addition to importing parameters, you can also use changing parameters for multiple-use Business Add-Ins. There is no sequence control for multiple-use implementations of BadIs. Therefore, using changing parameters can cause problems. There is no guarantee that implementations will not overwrite the results of previous implementations. Sequence control is technically impossible, since at the time of the definition the interface does not know which implementations there will be and which parameters will be changed by implementations. It is not possible to have a decision as to which implementation should be executed before which other (future) implementation.
Example:
In a particular application, you want to be able to continue processing indexes after another component has saved data (in other words, the system should allow you to use an add-in after saving). Since this point in time can be useful for different purposes, you can create an enhancement here that can be used by multiple subscribers.
To create a multiple-use Business Add-In, proceed as follows:
1. Define an add-in and select the Multiple Use checkbox from the Administration tab.
2. Define an interface with the method OBJECT_SAVED'and the importing parameter OBJECTNAME.
Calling your enhancement in the application program:
program event.
data exit_obj type ref to if_ex_event.
call method cl_exithandler =>get_instance
changing instance = exit.
form save_object using obj_name type c.
update
call method exit_obj->object_saved
exporting objectname = obj_name.
endform.
For the caller it is irrelevant whether (and how many) subscribers use the event as a starting point for further actions. The active implementations are called in the adapter method.
more in http://help.sap.com/saphelp_nw04/helpdata/en/ee/a1d548892b11d295d60000e82de14a/content.htm
Regards
Prabhu -
I want to add items to the bookmarks toolbar. for example: the Zoom Toolbar addon. This works, but not only the favicons appear on the bookmarks toolbar, aswell as the underlined text. How to avoid this?
I only want the favicons from an addon to appear on the bookmarks toolbar, not with the underlined text. How to do this?
This problem doesn't happen with any other toolbar. And this problem didn't happen with an earlier version of firefox. Please Help!
Thanx, BassMann.If you only want the favicons and not the names of the bookmarks on the bookmarks toolbar, you can do that with the [https://addons.mozilla.org/en-US/firefox/addon/4072/ Smart Bookmarks Bar] add-on.
-
How do i add a gmail account to outlook for mac
how do i add a gmail account to outlook for mac
Routing gmail through Mail.app:
imap-http://mail.google.com/support/bin/answer.py?answer=81379&topic=12814
pop-http://mail.google.com/support/bin/answer.py?answer=13275&topic=12810
Maybe you are looking for
-
TS4036 what if i only want to restore my contact list from backup
what if i only want to restore my contact list from backup
-
Does time machine back up purchased iTunes items?
I just started to use a Mac and time machine. Does Time Machine back up even purchased items, or do I need to burn those to disk? Thanks, Dan
-
MSI Z97 Gaming 7-can't use integrated GPU alongside dedicated for quicksync OBS
Hello, I've encountered a problem with my new MSI motherboard (I hope). I can no longer select the option to use the secondary virtual display with the integrated GPU. This was not a problem with my old Gigabyte Z87-D3H motherboard. I have enabled th
-
Using Presenter 8, quiz manager question...
Im using Presenter 8 and when i am creating a quiz from scratch, i am able to use the quiz manager to select 'if passing grade, go to slide xyz' thats fine, however... after creating a few questions, as you normally would, i go to amend the 'if passi
-
ADF BC Support Distributed Transactions?
Hi , As my subject! I have two DataBase in my Fusion Application , ADF BC Support Distributed Transactions? How TO do this ? Can you give me any advice ? thanks!! Edited by: Shaowei.Zhang on 2010-9-2 下午8:23