Add Attrib to Master data

Hi,
I have to add a new attrib to the Master data object, the question is:
- will the Aggr have any effect without data or with data
- if this Attrib is not needed in the Aggr, do i still need to rebuild those Aggr
Thanks
raf

adding an attribute will not affect aggr
also if u do not need this new attribute in the aggr, no need to rebuild it
Regards,
Rathy

Similar Messages

FI-AP Add field of master data vendor for reporting of vendor

Hi,
I have to add the field LFA1-BRSCH (industry) into layout output reports for suppliers:
S_ALR_87012082
S_ALR_87012093
S_ALR_87012103
I have already read the note 984305 - Line Item: Definition of special fields (T021S), but does not help me because it does not allow to enter fields of master data vendor
But I 've found the extension RFKRRANZ, but I do not know what to enter as a code.
Has anyone ever used or even if it is used on your systems could send me the code?
Any assistance would be greatly appreciated.
Eric

Hi,
if someone can affect, the answer SAP such enhancement is not possible for teh reports:
S_ALR_87012082
S_ALR_87012093
S_ALR_87012103
But only transactions: FBL1N/FBL3N/FBL5N or, as of ERP2004, FAGLL03.
Best Regards.
Eric

Nav attrib in master data

Hello,
i can't see any values for sales dist which is nav attrib of 0sold_to. All my r/3 transactions capture cutomer values in 0sold_to object.
0sold_to is created with reference 0customer.
0customer also has sales dist as nav attrib.
My reports and cubes don't show any values for sales dist. i want sales dist to be picked up from customer master data and displyed in reports.
i have loaded 0customer master data and it(master data for 0customer) shows values for sales dist.
i have not loaded 0sold_to seperately(as it is reference to 0customer).
Please suggest....
thanks

Hello A.H.P,
thanks a lot. i could also assign points to the earlier post today. there seemed to be a problem in assigning yesterday.
anyways, can u please elaborate on the need to run attribute change run? also do we need to select the infoObjects(which ones) in the attrib change run screen or do i need to run it for all objects availble?
also how do i use transaction rsrv? i have never used it before!!
thanks

How to add activation of master data

Hi,
1. Is it possible to add activation of Info Object master data in Process chain ??
2. should it be before attribute change run ????
Regards,
Viren.

Hi
Attribute change run is activation of master data. It is recommended that after loading the master data, you have to run Apply attribute/ hierarchy change run. It will activate master data and arrange all your attributes and hierarchies.
Regards
rak

Adding new attribute to Master data - Not present in ECC

Hi,
We want to add a new field in the master data object 0plant. the new field is not present in the R/3 side. So we are planning to maintain it manually.
Is it feasible? Can someone explain how to approach the situation?
Since it is not going to come in Process chain or any of the mappings below InfoObject will the process chains work properly?
Regards

Hi
if you cant impliment any logic you cam maintani it mannually.
First add attribute to master data object and activate.
Do master data load if required.
Then right click on materdata addtribute and manage -> content tab -> Content
display complete data and you can maintain attribute values individually for all ercords one by one (will be pain even for 100 records).
another alternative is of doing file upload for this attribute.
Regards
Sudeep

Process Chain - Master data Reorganizing and Realignment

Hello Experts,
1) Could you provide me the best practice on using the Re-organizing the master data for Time independant and time dependant attributes/texts.
2) In addition to attribute change run for Master data attr/hier/texts, how significantly it would help by adding Re-organizing the master data process step to the master data load process chains ? Is it mandatory to have this step at all ?
3) Is it sufficient to run the realignment for attributes alone or you have to run it again after loading the hierarchies ?
4) Advice whether to add Re-organize master data step for every single attribute and texts since it cant be grouped like other process types such as attribute realignment run!
Look forward for your updates!
Thank you, Vijay

Hallo
Please have allok at the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Probably it is not mandatory but if your masterdata is a mess than it would be better on performance
Mike

How to avoid user creation popup window in Employee Master Data Creation in SAP B1 9.0

Hi Experts,
I have to create employee master data.When I am creating Employee Master Data it is asking crete new user,If I was not provied user code.
Is there any standerd setting to avoid this?
Please suggest
Thnaks and Regards
DEV

Hi Dev,
The Pop up you are getting is Standard Behavior in 9.0
System is asking whether you want to assign any User Code to this Employee or not.
If you want to add any User Code to this New Employee Master then Press "OK" else Press "NO" to Add New Employee Master Data.
Hope this helps
Regards::::
Atul CHakraborty

Master data into ODS

HI,
How do we load from master data infosource into an ODS , using datamart concept. can any one give me step by step details..
When i try to assign infosource to the ODS in the update rules...it says " INFO OBJECT 0recordmode missing from the infosource"
Thanks in advance
Message was edited by:

Hi Harshi,
Add 0recordmode in master data infosource and ROCANCEL in tranfer structure
also check this info,
Message RSAU128 'InfoObject 0recordmode missing is an information message, you can activate the update rules even without 0RECORDMODE. The field is required for the delta method of InfoSources with connected DataSources from an SAP R/3 system. For FlatFile DataSources or external DataSources InfoObject 0RECORDMODE does not need to be contained in the transfer structure of the InfoSource, or it does not need to be filled separately in the transfer rules. In the transfer rules when maintaining the transfer structure, the delta method for flat files or external DataSources is determined by field Update mode. In InfoSources that get their data exclusively from flat files or external does not need to be contained in the you can ignore the above-mentioned message when creation update rules."
Hope this helps,
Sudhakar.

Adding fexible updated Master Data as characteristics to an InfoCube

hi there,
is it possible to add fexible updated Master Data (in InfoProvider section: InfoCubes, ODS etc.) as characteristics to an InfoCube?
Thanks
Hiza

Hi,
Yup, I does not really matter how do you load data to this InfoObject flexible / non flexible.
hope it helps
Regards
Vikash

Mulit-level linking to master data via navig attribs: A saga in two parts

The Saga, Part 1
I have a requirement to provide access to a hierarchy belonging to a characteristic that is not contained in an infocube. At first I thought I was going to have to add this characteristic to the cube, but then I realized the characteristic is a navigational attribute of another characteristic that is contained in the cube.
The Question, Part 1
Will users be able to use this navigational attribute as a selection criterion on reports, and will they be able to activate and use the display hierarchy associated with this characteristic? (I'm anticipating the answer to this question will be yes.)
The Saga, Part 2
Assuming the answer to the above is yes, let's carry this one step further. The navigational attribute described above (let's call it the "local" navigational attribute) also possesses navigational attributes, one of which users want to be able to use as a selection criterion on the same report (let's call this one the "remote" navigational attribute). They also want to be able to use the display hierarchy on this remote attribute.
The Question, Part 2
I know this is a long shot, but can a navigational attribute of a navigational attribute be accessed in BEx? Can that remote navigational attribute be used as a selection criterion? Can its hierarchy be used in a query? The scenario would look something like the following:
BASIC CHAR (contained in infocube)
|
   --> LOCAL NAVIG ATTRIB
          |
           --> REMOTE NAVIG ATTRIB (hierarchy needed in report)
I'm anticipating the answer to Question #2 will be no, but I just wanted to be sure. I'm guessing I'll have no choice but to add at least one of these characteristics to the cube.
Thanks
P.S. We're running BW 3.1, BI Content 3.3.

<b>The Question, Part 1
Will users be able to use this navigational attribute as a selection criterion on reports, and will they be able to activate and use the display hierarchy associated with this characteristic? (I'm anticipating the answer to this question will be yes.)</b>
The answer is yes. It helps not to have the IO in the cube and still use it in the front end.
<b>The Question, Part 2
I know this is a long shot, but can a navigational attribute of a navigational attribute be accessed in BEx? Can that remote navigational attribute be used as a selection criterion? Can its hierarchy be used in a query? The scenario would look something like the following:
BASIC CHAR (contained in infocube)
   --> LOCAL NAVIG ATTRIB
     REMOTE NAVIG ATTRIB (hierarchy needed in report)</b>
When read this thread, I was curious to see if it works or not. I did try to do this on coorder, plant and plant category. Guess what, it didnt work. I even flagged it NAVIGATIONAL ATTRIBUTE INFOPROVIDER in the IO maintenance to see it reflects on the cubes navigational attributes
No this scenario wont work.
So in the infocube maintenance you need to see something like this basic char__local navig__remote nav to make the scenario work. Which is obviously unavailable in the cube maintenance.
I would love to see some one make this work. Reduces lot of effort to realign data in the cube if there is a problem in the master data.

How to add a role so user can do Export, Copy & paste Master Data?

How to add a role so user can do Export, Copy & paste Master Data? Thanks!

Add S_GUI to the user role.

Error while trying to add Master Data in S&OP

Hi,
I am getting the below error while trying to add new Master Data entries in S&OP. Can anyone help here please? I have added new items in the past, but did not get any error before.
code: MASTER_DATA_OPERATION_EXCEPTION
severity: INFO
description: Error during Stage 02 of Data Integration
log id: 08f6b26e-5981-4e21-ad65-17df697fdc62
I have also attached the screenshot and the new data i am trying to add.
Thanks,
Thahir Masdook

Hi Vivek,
I have added Master Data in the past as well. Recently this system (Z45) was upgraded and the planning area was re-activated by my Project Lead. After the re-activation i am unable to add any Master Data and Save.
Thanks,
Thahir Masdook

Master Data is in Revised Version while transporting a request to add an attribute in existing master data infoobject

Hi Experts,
I am facing short dump when trying to send a request to add an attribute in Master Data Infoobject from DEV to QA.
Although the attribute is getting added to main Master data Info object but main master Info object is in Revised Version.
I have been searching the solution in SCN from couple of days and tried every single solution but none of them works for us.
When I check in se09 I am getting the following message
Program terminated (job: RDDEXECL, no.: 09445401)
   Execution of programs after import (XPRA)
End date and time : 20150420094559
Ended with return code: ===> 12 <===
When checking in ST22 IN QA I am getting the following message
The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSDD_DS====================CP' has to be
terminated.
When I checked in ST22 in QA I am getting following dump
   31         RAISE EXCEPTION TYPE cx_rs_program_error
   32           EXPORTING
   33             text = 'Invalid DSO subtype'.                   "#EC NOTEXT
   34     ENDCASE.
   35
   36 *   get table name from DDIC
   37     CALL METHOD cl_rsd_odso=>get_tablnm
   38       EXPORTING
   39         i_odsobject = n_infoprov
   40         i_tabt      = l_tab
   41       IMPORTING
   42         e_tablnm    = l_tablnm
   43       EXCEPTIONS
   44         OTHERS      = 1.
   45
   46     IF sy-subrc <> 0.
   47       RAISE EXCEPTION TYPE cx_rs_program_error
   48         EXPORTING
   49           text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
   50     ENDIF.
   51
   52     CALL FUNCTION 'DDIF_NAMETAB_GET'
   53       EXPORTING
   54         tabname   = l_tablnm
   55       TABLES
   56         dfies_tab = l_t_comp
   57       EXCEPTIONS
   58         not_found = 1
   59         OTHERS    = 2.
   60     IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
   62         EXPORTING
   63           text = 'Error in DDIF_NAMETAB_GET'.        "#EC NOTEXT
   64     ENDIF.
I have attached the short dump
Thanks In Advance
Rashid

Hi Tom
Thanks for your reply.
I am not sure what do you mean by Manually activated in Dev or QA . If you mean Dev then i did and also maintain the infoobject related tables using transaction SE14 but still same error.
But if you mean in QA then QA is lock for manual activation but i tried though program RSDG_IOBJ_ACTIVATE but again failed. I also maintain the infoobject related tables using transaction SE14 but still same error.
Regards
Rashid

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

Master Data Services Add-in for Excel Issue

I am trying to configure MDS in the Production server. I am running into isssues.
(I was able to do the whole process successfuly in my local system - Versions are same in the local and server - Only difference is local machine is windows 7 server is Windows 2008 R2)
I have installed SQL server 2012 Enterprise Version SP1. I am able to browse the MDS URL. User has got full permissions. When I try to access the MDS via Excel I get the below error.
Can any one help me please I have spent days on this withou any joy.
Error message
TITLE: Master Data Services Add-in for Excel
An error occurred while receiving the HTTP response to
http://MYIPADDRESS/mds/service/service.svc/bhb. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See
server logs for more details.
ADDITIONAL INFORMATION:
The underlying connection was closed: An unexpected error occurred on a receive. (System)
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
An existing connection was forcibly closed by the remote host (System)
BUTTONS:
OK
Bn

I have finally found a solution for this problem! Every time I opened Excel (unless I ran as administrator) I would have to activate the MDS add-in; this was time-consuming and annoying. It seems like there was no solution posted online anywhere! Well
after much aggravation, I have finally found a solution:
Fixing the Microsoft MDS Excel Add-In so it Stays Enabled
Press the Start button (Windows button)
In the search bar type “REGEDIT”
Open regedit.exe
A pop-up will ask permission for the Registry Editor to make changes to the computer, select Yes.
In the Registry Editor expand HKEY_CURRENT_USER
In the HKEY_CURRENT_USER folder, expand in the following order: Software -> Microsoft -> Office -> Excel -> Addins
Select Microsoft.MasterDataServices.ExcelAddIn
Double-click on LoadBehavior in the right panel
In the Edit Value popup, change the value to
Press OK
Exit the Registry Editor
The excel add-in should now be active anytime you open Excel. If multiple errors occur while using the add-in, the Load Behavior may change back to 0. If that occurs simply follow these steps so the add-in will be active when Excel starts up.
I hope this helps some of you avoid the long hours of trying to find a solution to this silly problem.
Cheers!
Tony

Add Attrib to Master data

Similar Messages

Maybe you are looking for