Add audio files and automatically convert

How to set up automatic conversion in MP3 128kb/s audio when I add music to itunes.
The problem is that I have to constantly convert all I add. This creates a duplicate and I have to look for them and delete them. This is not very convenient

Thanks. I have upgraded and used the new conversion to Flash for the mp3 and
it works well. The look of the player isn't the greatest but it suits my
needs. Thanks again.

Similar Messages

Add audio files and control play in pdf

Hi, newbie here. I have a set of large text documents in Word and corresponding mp3 audio files. I am trying to create pdf's with the audio files embedded at specific points in the text. I can put audio in and play it, but there is no controls for the audio. I have seen a pdf file with a play-pause-stopbar that works, but cannot figure out how to do it. Any and all help is greatly appreciated. Using Acrobat Pro7 (can upgrade if needed). Thanks
Just another thought, is there a small flash player that can be mbedded into a pdf?

Thanks. I have upgraded and used the new conversion to Flash for the mp3 and
it works well. The look of the player isn't the greatest but it suits my
needs. Thanks again.

Hello! I have some my violin recorded audio files and want them to be converted to printable notation throw "audio to score"from Factory. But do not have a normal result. Could someone help me, please. .

I have some my violin recorded audio files and want them to be converted to printable notation throw "audio to score"from Factory. But do not have a normal result. Could someone help me, please. .

seeren wrote:
Normal result is on the sloppy side of inaccurate.
Wish I'd started this topic so I could give you a green star!
Great description.

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

Jayhawk
I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
ATR

I need to copy audio files and projects from logic to an external hard as my MBPis nearly full and my external hard drive has packed up with all my files on it, any suggestions on how do I copy 200GB from my MBP to a new external HD

I Use logic and back my audio file and projects on an external HD ,this has now packed up . I have all the files in the MBP , but need to copy them to a new external HD, I have only 10GB left on my machine , how do I copy 200GB from my machine to a new External HD.
any helpful full advice would be appreciated.
angus

Yes, just drag and drop them into the drive..
How long will it take? Hard to say without knowing the type and speed of the drives in question.. and even then it's hard to estimate... but does time really matter?
The fact you only have 10 Gigs left will/may slow the process down but it wont/shouldn't stop it...
If needed.. just drag and drop some of the files at a time.. not all of them.
Remember that copying files doesn't delete them from the original drive... You will still need to delete them yourself after they are copied over and empty the trash....
However....
When you saved these projects in Logic (Pro X?) did you save them using the include audio files option?
If not, then when you move the audio files used in these projects... Logic will not know where they are to reload them........ and that will cause you issues.
So.. if you didn't...
I would use this method instead...
Logic Pro X: Move, copy, and convert audio files

Audio files and voice recordings have no sound in iMovie after a while, help?

I was editing and I was putting audio files and recording my voice fine then all of a sudden, audio files and voice recordings I were adding had no sound. The ones already put on had sound but when I tried to drag more audio files or record my voice, nothing. No sound. I tried restarting my Mac, didn't work. I changed the MP3 name to AIFF, didn't work. I'm using iMovie '11.

Hi PK - welcome to the forum!
Increasingly, people with digital still cameras want to import their short movie clips created with that camera. BUT the catch is that these movies are NOT in .dv format. They are MPEGs, and if they are MPEG1 or MPEG2 then they must be converted to DV before they will import into iMovie with the audio able to play.
This conversion usually can be done with a free app. called MPEG StreamClip, but may also need another piece of software called the Apple MPEG2 Playback Component (which costs about $20)..
A search in this forum for those, will give you several threads on the issue!
Look here, for example, for more about the method required:
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
NOTE that iMovie was designed for DV use (a high-quality editing format), not the much lower quality MPEG footage.

Can't add audio files (PSE 5)

PSE 5 won't allow students to add audio files(WAV or MP3) to slide shows. Error message is as follows. "...system does not have required compressor/decompressor (codec) installed."
I'm working in a lab situation. Only 2 of the 24 computers are having this issue. Help!

Try importing all those music files into organizer and see if it can play those files. If organizer is able to play these files, you can add these files to slide shows.
Else install some quick time codecs and try including these music files again.
Regards.

How to make a movie from an audio file and 1 static image?

Hi,
I want to make a movie that it is basically an 8 minutes audio file and I want to have a background picture that is static and stays there during the whole 8 minutes of my audio.
How can I do that?
I'm able to add the audio and the picture, however I can't stretch the picture to 8 minutes.
My iMovie version is 5.0.2
Thanks,
Martin

Hi mcanovas - Simply duplicate the picture as many times as needed. In the Photos pane you can extend the pic to 30 seconds, so duplicate that 16 times and there you go!
I hope the audience will stay focused

How to add audio files.

I'm using Premiere Elements 11 on my iMac. I can't for the life of me figure out how to add music files to the 8 or so that come with the program. Anybody else having this problem or am I just dumber than most?

Comstar 11 wrote:
As I put in my original post I might be dumber than most and that's still a possibility. I also tried the "Use Smartsound" same feeling that I didn't like the add on that just took me to another site to sell me music. I couldn't find the "Project Assets" box after looking almost everywhere. But..... I was in the "Quick" mode. Knowing I was a rank beginner I avoided the "Expert" tab. But after looking everywhere else I opened that tab and "It's A Miracle" there it was. Still stumbling through the learning process so thanks for your kind help. If I hit the wall again I'll make another post looking for help. Thanks Again.
I tried the Quick mode. When I did 'add media' in the upper left corner, video files went straigt to the project box. Then I tried an audio file and it went below the video in the project box. So, I see where in 'Quick' the 'Project Assets' box and step are skipped. Sorry about misleading you.
Either way, audio files get to the project box when you pick them up as a file on your computer.
There are two great sources to speed the learning process. lynda.com has courses that are like a personal demo of everything PrE does with a great coach explaining it. http://www.lynda.com/Premiere-Elements-tutorials/Up-Running-Premiere-Elements-11/109763-2. html A few if the chapters are free as a trial. The fee is $25 for a month of access. One month is more than enough if all you want is the one course.
If you prefere owning a course on a disk, video2brain is an alternative, but I don't think it is as thorough.
Bill
Bill

Trying to import .mov audio file and burn as MP3

Can someone point me to a thread, or be kind enough to post answer, about how I might successfully import a .mov audio file and wind up burning it as an MP3. I've been dinking around with this for too long. I can import it and end up with it in the format: MPEG-1, Layer 3. But when I burn it to CD and play it on a Sony boom box, I hear nothing. I tried playing it in another iMac and hear nothing.
Thanks.

I was hoping someone in this forum could point me in the right direction to a web site that is designed specifically for Garage Band users that need sound effects.
Check out:
http://www.macjams.com/
http://www.thegaragedoor.com/
These both are GarageBand-oriented.
Also, check out:
http://www.loops4free.net/
Maybe you'll find something useful at one of them.

Table Widget. Inserting text, audio file and pdf file.

Hi everyone,
I have a client [Church organization] They want to put all their Sermon audio in their website. Similar to this: http://www.calvarysj.org/?page_id=1310
They have a lot audio files and I think I need to sort it by year or per book but going to back to my question does anyone know how to do it or what kind of widget should I use?
Thanks,
Debs

You use the table widget here :
http://musewidgets.com/collections/all/products/table-maker
Additionally for adding audio files ;
https://forums.adobe.com/message/6429361
https://forums.adobe.com/message/6276219
Thanks,
Sanjit

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

24/96 audio files and Apple TV

Can Apple TV support 24/96 audio files that are in iTunes? Or, does Apple TV only support 24/96?

mwheelerk wrote:
So if I send the ATV a 24/96 audio file and output it via the digital optical output it to a DAC which accepts 24/96 and then to my audio system I should be good?
No, for some reason stereo audio is downconverted to CD quality 16/44.1 for playback, even over optical/HDMI.
It's been discussed a few times.
Here's one example with link to further discussion:
http://discussions.apple.com/thread.jspa?messageID=11251178&#11251178

Open an audio file and get sampled data

Hello,
there is a way to open an audio file and get an array with sampled data in Java?
I need to perform an fft of my audio file.
Best Regard
Manuel

Dear Mr Thompson,
this is my first post on this topic.
I have already tried various way to get samples from audio file, in particular I focused my attention on this:
http://jvalentino2.tripod.com/dft/index.html
I have implemented the code illustrated in the tutorial but the result is unsatisfactory. If I try to plot the samples of obtained from a pure tone the result is not the expected waveform but something very different, a Fourier analysis of this data is completely useless. Hence I am looking for a way to read data in a similar manner to the matlab's function auread (http://www.mathworks.com/access/helpdesk_r13/help/techdoc/ref/auread.html).
Fft is not really hard to implement but I'm using a scientific library (http://www.ee.ucl.ac.uk/~mflanaga/java/) for obtain values in frequency space.
I apologize for the inaccuracies.
Regards

Why I cannot add audio file to slide show because of decompressor code

I cannot add audio file to slide show because of compressor or decompressor needed in the system. Anyway to do this

If using MP3 files it sometimes helps to delete album art from the track.
http://kb2.adobe.com/cps/332/332125.html

Add audio files and automatically convert

Similar Messages

Maybe you are looking for