Add Azure VM to the Perfmon

Hi,
I have a Azure VM in VNET say VNETVM1. I have perfmon on VNETVM1. There is one Azure VM which is not in VNET say SimpleVM. I want to add SimpleVM in the PerfMon which is on VNETVM1. Is it possible?
Thanks,
Vallari

I do not get your answer exactly , but you mean "That is a much bigger issue from a security perspective." this is dangerous to expose SQL server connection port to the Internet ?
Application uses named SQL instance , so it needs UDP 1434 port to connect to SQL server.
Exposing any server to a network is dangerous.  Exposing a server to the public internet is more risky than connecting to a private network. You cannot eliminate risk but it can be mitigated.
An inherent risk with exposing the SQL Server port is that any client with network connectivity can then try to compromise security, commonly with a dictionary attack.  A malicious user can then gain access to the database limited only by
the compromised account security context.
There are several steps you can take to mitigate this risk. To name a few, allow only trusted IP addresses through the firewall. Run only those services actually needed. Expose only those ports needed. Rename the sa login.
Assign strong passwords to all accounts. Keep all software up-to-date with security patches. Use a service layer to access database services instead of directly from front-end clients.
In your case, you can hard-code the named instance port in connection strings instead of using the SQL Browser service.  Your connection strings do not need to specify the instance name with this technique and UDP 1434 is not needed for connectivity.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Similar Messages

Azure powershell gives the error :Your credentials have expired Please use Add-AzureAccount to login again.

Azure powershell gives the error :Your credentials have expired Please use Add-AzureAccount to login again.
Keep receiving the same error even after logging in again and again.
I want to create credentials for my storage account and want to take backup of a database on azure storage account.
Please help.

I had the same error and it was caused by the newest versions of Azure PowerShell. I had to install back to version 8.14 (February 2015) in order for it to work.
http://az412849.vo.msecnd.net/downloads04/azure-powershell.0.8.14.msi

Can't add azure ad connect health to azure

Hi,
I purchased Azure AD Premium for my PAYG Azure subscription. The license on Azure even states Premium, however, when I try to add Azure
AD Premium (logged in as a global admin) to my subscription (in the new portal) I get this error:
You are required to have Azure Active Directory Premium license to be able to create and use Azure Active
Directory Connect Health
This is contradictory. Please advise how to get around this.

Hi,
I purchased Azure AD Conect Health for my PAYG Azure subscription, having purchased Azure AD Premium. The license on Azure AD states Premium, however, when I try to add Azure AD Premium to my subscription (in the new portal) I get this error:
AZURE ACTIVE DIRECTORY LICENSE
Premium
<svg class="msportalfx-svg-placeholder" focusable="false" role="img" viewBox="0 0 16 16"><g><path d="M10.8,8H5.2V6.1c0-0.8,0.3-1.8,0.7-2.3C6.4,3.4,7.4,3.1,8,3.1c0.6,0,1.6,0.3,2.1,0.8s0.7,1.2,0.7,2V8h2.4V6
c0-1.3-0.5-2.6-1.3-3.5C11.1,1.6,9.3,1,8,1S4.9,1.6,4.1,2.5C3.3,3.4,2.8,4.6,2.8,6v2h0C1.6,8,1.2,8.7,1.2,9.6v4.8 c0,0.8,0.5,1.6,1.4,1.6h10.8c1,0,1.4-0.8,1.4-1.6V9.6c0-0.8-0.3-1.6-1.6-1.6h0H10.8z"></path></g></svg>
You are required to have Azure Active Directory Premium license to be able to create and use Azure Active Directory Connect Health.
Please advise?

How do I add my app to the "Device Family" of iPad

I want to add my app to the "Device Family" of iPad as well - http://www.screencast.com/t/VlfuptLU
Can someone please let me know how I can do this so when people search for my app on their iPad they can find it as well.
Thanks

Developer forums are here:
https://discussions.apple.com/community/developer_forums
Please post development related questions there.

Is there a way to add two windows in the same window?

is there a way to add two windows in the same window?

what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

How to add an image in the header? Pages 5.0

I don't believe I have to use Microsoft Word! I can't, no way, add an image in the header. This is unbelievable!
**** time I updated to Mavericks!
Please, does anyone know the solution?
I'm losing a great deal in my company.

Do you still have Pages 4.3 installed. If so, use that.

How do I add web part in the event receiver after the site is provisioned in SP 2010?

How do I add web part in the event receiver after the site is provisioned in SP 2010?

You try the below steps:
1. Use long operation to provision the site, so that it does not time out in process.
2. After provisioning, you can add a page or add the web part directly to landing page of site.
For each of the above steps you can find the sample code pieces.
if you couldn't get that, let me know. I will share with you.
Thanks, Ashish If my response has helped you, please mark as answer.

Can not add a picture to the JFrame from an ActionListener class

As topic says, I can not add a picture to the JFrame from an ActionListener class which is a class inside the JFrame class.
I have a Map.java class where I load an image with ImageIcon chosen with JFileChooser.
I my window class (main class), I have following:
class OpenImage_Listener implements ActionListener
     public void actionPerformed(ActionEvent e)
          int ans = open.showOpenDialog(MainProgram.this);     // "open" is the JFileChooser reference
          if(ans == open.APPROVE_OPTION)
               File file = open.getSelectedFile();
               MainProgram.this.add(new Map(file.getName()), BorderLayout.CENTER);     // this line does not work - it does not add the choosen picture on the window,
                        //but if I add the picture outside this listener class and inside the MainProgram constructor, the picture apperas, but then I cannot use the JFileChooser.
                        showMessageDialog(MainProgram.this, fil.getName() ,"It works", INFORMATION_MESSAGE); // this popup works, and thereby the ActionListener also works.
}So why can�t I add a picture to the window from the above listener class?

The SSCCE:
Ok, I think I solved it with the picture, but now I cannot add new components after adding the picture.
Look at the comment in the actionlistener class:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
public class Test extends JFrame{
     JButton b = new JButton("Open");
     JFileChooser jfc = new JFileChooser(System.getProperty("user.dir"));
     Picture pane;
     Test(){
          super("Main Program");
          setLayout(new BorderLayout());
          JPanel north = new JPanel();
          add(north, BorderLayout.NORTH);
          north.add(b);
          b.addActionListener(new Listener());
          setVisible(true);
          setSize(500,500);
          pane = new Picture("");
          add(pane, BorderLayout.CENTER);
     class Listener implements ActionListener {
          public void actionPerformed(ActionEvent e){
               int ans = jfc.showOpenDialog(Test.this);
               if(ans == jfc.APPROVE_OPTION)
                    File file = jfc.getSelectedFile();
                    Test.this.add(new Picture(file.getName()), BorderLayout.CENTER);
                    pane.add(new JButton("NEW BUTTON")); // Why does this button not appear on the window???
                    pane.repaint();
                    pane.revalidate();
     public static void main(String[] args)
          Test t = new Test();
class Picture extends JPanel
     Image pic;
     String filename;
     Picture(String filename)
          setLayout(null);
          this.filename = filename;
          pic = Toolkit.getDefaultToolkit().getImage(filename);
        protected void paintComponent(Graphics g)
            super.paintComponent(g);
            g.drawImage(pic,0,0,getWidth(),getHeight(),this);
            revalidate();
}

How do I add a bookmark to the Bookmark toolbar permanently and delete it from the Recntly Bookmarked list?

It seems to me that in a previous version of Firefox that one could add a bookmark to the Bookmarks Toolbar and have it stay there.
I like to keep things neat and tidy. Now when I delete this bookmark from the Recently Bookmarked list (or the Unsorted Bookmarks list), Firefox insists only deleting it from the Bookmarks Toolbar as well.
How do I add a bookmark to the Bookmarks toolbar and keep it there? Am I required to keep it in the Recently Bookmarked and/or Unsorted Bookmarks list in order to have it remain on the Bookmarks Toolbar?

* "Most Visited" and "Recently Bookmarked" and "Recent Tags" are examples of so called [[Smart Bookmarks folders|Smart Bookmarks folders]] and are not real existing folders.
* Smart folders show a list created by a query of the places.sqlite database that stores bookmarks and history in Firefox.
* Smart folder lists show a maximum of 10 entries by default.
* Bookmarks and history items that show up in a smart folder list are stored elsewhere in another folder and any changes made are applied to the real bookmark or history item.
* If you remove an entry then the list is shifted up and a new entry that wasn't shown previously is added to show 10 entries.
* If you add a new bookmark or visit a website then a new item is added at the top and the entry at the bottom disappears from that list.

I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I have a backup from about 4-5 months ago avaiable. Can I add/update contacts from the back up rather than restore which i assume will literally delete any new contacts added...?

I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I recently sold my macbook air and also my mac book pro, so have no recent backups avaiable. I have a backup from about 4-5 months ago available on an external hdd as a time machine backup. Can I add/update contacts from the back up rather than restore? The reason i wish to do this is because in the update i didnt lose any messages, so all of the people i have met and networked with since that last update those many months ago, i have in my messages listings. They are all unidentified numbers at present but over time i will be able to work through the messages and based on the conversation recall who each was with. Also, yesterday, some two weeks after the update had left my contacts list entirely empty... a vast majority just reappeard, though all of them are without any phone numbers, all just emails or facebook contacts. This is the work of facebook not mac/ios6 isnt it...? Any help here would be greatly apprecaited. I am about 2 days from flying to canada and having those contacts would make life a lot easier.

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

How to add existing warehouse to the existing item in OITW

Hi,
Could somebody help me to resolve this problem:
I try to add via SDK (using ItemWarehouseInfo object) existing item to existing warehouse - OITW table (our SBO v.2004 configured to not open automatically all warehouses for all items). - like via Item card user adds manually warehouse code in the stock tab. There is code i use:
if oItems.GetByKey("ItemCode")
    oItems.WhsInfo.WarehouseCode = "WarehouseCode"
    oItems.WhsInfo.Add()
    oItems.Update()
endif
but SDK instead of add new record to the OITW replaces existing record with other warehouse code (like update).
What have i do to resolve this issue ?

Oleg,
new records are not added in OITW when you add existing items to existing warehouses. OITW will have new records only when you create new warehouse through UI or SDK. in all transaction that follow, the respective warehouse quantity in OITW will be updated. how about using StockTransfer object? it does what you want.
regards,
Binita Joshi

I wnat to add new fieldtext in the alv list output plz tell me

hi,
i whant add new fieldtext in the list output, plz tell me where can i modify it.
CORRECTIONS
DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
09.03.2001 L9CK045451 0388404 XSC    Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                     Pchbegda and pchendda.
22.04.2004 S6BK024775 730486 PS     Too many selection parameters in
                                     header
19.06.2006 S6BK035494 956731 JF     No sorting by qualification
REPORT RHPK_FIND_PERS_WITH_EXPIRED_QU MESSAGE-ID PQ.
DATA AUFRUF(8).
TABLES : OBJEC, GDSET.
DATA LIST.
DATA MARKFIELD(1) TYPE C.
ALV_POOL
TYPE-POOLS SLIS.
INCLUDES
INCLUDE .
INCLUDE RHPEINI0.
TABLES
DATA: orgeh_BUFFER like hrobject OCCURS 1 WITH HEADER LINE.
DATA: OBJECTS    LIKE HRSOBID    OCCURS 1 WITH HEADER LINE.
DATA: h_OBJEC    LIKE objec    OCCURS 0 WITH HEADER LINE.
DATA: pers_objects LIKE HRSOBID    OCCURS 1 WITH HEADER LINE.
DATA: QUALI_TAB LIKE QUALI_PROF OCCURS 1 WITH HEADER LINE.
DATA: PERSONS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: H_PERSONS LIKE HRPE_PROFL OCCURS 1 WITH HEADER LINE.
DATA: LIST_OUTPUT LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: BOOK_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: PLAN_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA H_SUITED LIKE DYNP_PCRIT-SUITED.
DATA: O_COLOR LIKE STREEATTR-COLOR.
DATA: O_INTENSIV LIKE STREEATTR-INTENSIV.
DATA SHOW_KEY.
DATA EVENT.
DATA: HTEXT LIKE P1000-STEXT.
DATA: EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: COLLECTED_EVENTS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: SUBTY_TAB LIKE HRPE_OTYPE_SUBTY OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF HIDE_STRU,
        PERSTYPE LIKE HROTYPE-OTYPE,
        PERSOBID LIKE HRSOBID-SOBID,
        PERSTXT LIKE PERSQ_PROF-STEXT,
        SCALE_ID LIKE HRPE_PROFQ-SCALE_ID,
        TRAININGTYPE LIKE HRP1000-OTYPE,
        TRAININGID   LIKE HRP1000-OBJID,
        TRAININGSTXT LIKE HRP1000-STEXT,
        QUALID LIKE QUALI_PROF-QUALID,
        QUALTEXT LIKE QUALI_PROF-QUALSTXT,
      END OF HIDE_STRU.
DATA: BEGIN OF EXTAB OCCURS 10,
         FCODE LIKE RSMPE-FUNC,
      END OF EXTAB.
DATA: CURRENT_QUALID LIKE QUALI_PROF-QUALID.
DATA: CURRENT_TRAININGSID LIKE HRP1000-OBJID.
DATA: CURRENT_TRAININGTYPE LIKE HRP1000-OTYPE.
DATA: SUBRC LIKE SY-SUBRC.
VARIABLES
DATA: OBJID LIKE P1000-OBJID.
DATA: H_LINE_COUNT TYPE I.
DATA: H_TABIX1 LIKE SY-TABIX.
ALV-Variables
DATA: alv_events_line    TYPE slis_alv_event.         "header line
DATA ALV_EVENTS TYPE SLIS_T_EVENT.
DATA GT_ALV_LIST_TOP_OF_LIST TYPE SLIS_T_LISTHEADER.
DATA: gt_events TYPE SLIS_T_EVENT.
DATA G_REPID LIKE SY-REPID.
DATA G_VARIANT LIKE DISVARIANT.
DATA ALV_USERCOMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA G_USERCOMMAND_FOR_RANKINGLIST TYPE SLIS_FORMNAME VALUE
'USER_COMMAND_FOR_RANKINGLIST'.
DATA ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: ALV_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
DATA: Help_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
begin of Dynpro 5020 - POPUP: WEITER
DATA: OK_CODE_5020   LIKE SY-UCOMM.
DATA: NO_ORG.                          "if no org selected
DATA: H_TABIX LIKE SY-TABIX.
begin of Dynpro 20nn - Header
TABLES: DYNP_RHPP.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-005.
PARAMETERS:
   H_EVENTS LIKE DYNP_RHPP-GEN_TRAIN, "with training sugg
   H_QUAL   LIKE DYNP_RHPP-EXPIRED_QUAL. "with Qual
SELECTION-SCREEN END OF BLOCK B3.
INITIALIZATION
INITIALIZATION.
PERFORM READ_T77S0_PARAMETERS_FOR_PE.
get user parameters/Planvariante und Beginndatum setzen:
PCHOTYPE = $ORGEH.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
       EXPORTING
            FILL_IF_INITIAL = 'X'
       IMPORTING
            PLVAR           = PCHPLVAR
            BEGDA           = PCHBEGDA
            endda           = Pchendda    "Correction 0410219
            WITH_KEY        = SHOW_KEY
          SUBSTITUTE      =
          ESSENTIAL       = only_essential
            ORG_UNIT        = PCHOBJID-LOW
      EXCEPTIONS
            OTHERS     = 0.
PCHBEGDA = LOW_DATE.   "Correction note: 0410219 / AL0K023393
get menu text for key on/off
PERFORM USER_MENU_TEXT_KEY(SAPLRHP0) USING G_MENU_TEXT_KEY.
start-of-selection
START-OF-SELECTION.
terminate the selection if objid isn't given
READ TABLE PCHOBJID INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0
AND PCHOBJID IS INITIAL.
    PCHOBJID-SIGN   = 'I'.
    PCHOBJID-OPTION = 'EQ'.
    PCHOBJID-LOW    = '00000001'.
    APPEND PCHOBJID.
    NO_ORG = TRUE.
ELSE.
    NO_ORG = FALSE.
ENDIF.
GET OBJEC.
terminate the selection if objid isn't given
IF NO_ORG = TRUE.
    EXIT.
ENDIF.
OBJECTS-PLVAR = PCHPLVAR.
OBJECTS-OTYPE = PCHOTYPE.
OBJECTS-SOBID = OBJEC-REALO.
APPEND OBJECTS.
Für das lesen der Organisationseinheit
h_OBJEC-PLVAR = OBJEC-PLVAR.
h_OBJEC-OTYPE = OBJEC-OTYPE.
h_OBJEC-OBJID = OBJEC-objid.
append h_objec.
Read table h_objec index 1 transporting no fields.
if sy-subrc = 0.
Fill Buffer
    orgeh_BUFFER = h_OBJEC.
    orgeh_BUFFER[] = h_OBJEC[].
    CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
      TABLES
        OBJECTS = orgeh_BUFFER.
    Loop at h_OBJEC.
      H_TABIX = SY-TABIX.
Read text of organisation
      CALL FUNCTION 'RH_READ_OBJECT'
           EXPORTING
                PLVAR     = h_OBJEC-plvar
                OTYPE     = h_OBJEC-otype
                OBJID     = h_OBJEC-OBJID
           IMPORTING
              OBEG      = h_objec-begda
              OEND      = h_objec-endda
               SHORT     = short
                STEXT     = h_OBJEC-stext
          EXCEPTIONS
                NOT_FOUND = 1
                OTHERS    = 2.
      IF SY-SUBRC = 0.
        modify h_OBJEC index H_TABIX.
      ENDIF.
    endloop.
endif.
end-of-selection
END-OF-SELECTION.
read objects of the organizational unit
OBJID = OBJECTS-SOBID.
CALL FUNCTION 'RHPH_PICK_UP_PERSONS'
      EXPORTING
           BEGDA      = PCHBEGDA    "Correction 0410219
           ENDDA      = PCHENDDA    "Correction 0410219
         STATUS     = '1'
           WITH_STEXT = 'X'
       TABLES
            OBJECTS    = OBJECTS
            PERSONS    = H_PERSONS
      EXCEPTIONS
           UNDEFINED = 1
           OTHERS     = 2.
IF SY-SUBRC = 0.
prepare objects !
    objects-otype = h_persons-ttype.
    objects-sobid = h_persons-tobid.
    append objects.
ELSE.
    EXIT.
ENDIF.
CLEAR OBJECTS. REFRESH OBJECTS.
prepare sel_objects !
pers_objects-PLVAR = PCHPLVAR.
LOOP AT H_PERSONS.
    pers_objects-OTYPE = H_PERSONS-TTYPE.
    pers_objects-SOBID = H_PERSONS-TOBID.
    APPEND pers_objects.
ENDLOOP.
sort objects and delete adjacent duplicates
SORT Pers_OBJECTS BY PLVAR OTYPE SOBID.
DELETE ADJACENT DUPLICATES FROM Pers_OBJECTS COMPARING PLVAR OTYPE
SOBID.
CALL FUNCTION 'RHPK_FIND_PERS_WITH_EXPIRED_Q'
       EXPORTING
           PLVAR            = PCHPLVAR
           CHECK_BEGDA      = PCHBEGDA
           CHECK_ENDDA      = PCHENDDA
           SUBTY            = $ownsb                        "'B032'
         only_essential   =
         target_otype     =
         target_ap_iea    =
       TABLES
            IMP_PER_TAB     = pers_objects
            QUALI_TAB       = QUALI_TAB
            PERSONS         = LIST_OUTPUT
        altq_tab          =
      EXCEPTIONS
           NO_QUALIFICATION = 1
           NO_PERSON_FOUND = 2
           OTHERS           = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
100% case
READ TABLE pers_objects INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC = 0.
    sort pers_objects by otype sobid.
check the selected persons: if org.unit was selected !
    Loop at pers_objects.
      H_TABIX = SY-TABIX.
      READ TABLE LIST_OUTPUT WITH KEY OTYPE = pers_objects-OTYPE
                                       SOBID = pers_objects-SOBID
                                       BINARY SEARCH.
      IF SY-SUBRC <> 0.
      person doesn't belong to the selected org.unit
      DELETE LIST_OUTPUT INDEX H_TABIX.
      ENDIF.
    ENDLOOP.
ENDIF.                               "org.unit check needed ?
end-of-selection.
sort h_objec by otype objid.
sort list_output by otype sobid.
sort h_persons by ttype tobid.
ALV-Liste aufbauen
loop at h_objec.
    loop at h_persons where otype = h_objec-otype     "XSC
                      and   sobid = h_objec-objid.    "XSC
      Read table list_output with key
                             otype = h_persons-ttype
                             sobid = h_persons-tobid
                             binary search.
      if sy-subrc = 0.
        h_tabix1 = sy-tabix.
        while sy-subrc = 0.
          clear alv_output.                            "XSC
          ALV_OUTPUT-otype    = h_objec-otype.
          ALV_OUTPUT-sobid    = h_objec-objid.
          ALV_OUTPUT-stext    = h_objec-stext.
          ALV_OUTPUT-Ptype    = LIST_OUTPUT-otype.
          ALV_OUTPUT-pobid    = LIST_OUTPUT-sobid.
          ALV_OUTPUT-pshort   = LIST_OUTPUT-short.
          ALV_OUTPUT-ptext    = LIST_OUTPUT-stext.
          ALV_OUTPUT-qualid   = LIST_OUTPUT-qualid.
          ALV_OUTPUT-qualstxt = LIST_OUTPUT-qualstxt.
          ALV_OUTPUT-expbegda = LIST_OUTPUT-vbegda.
          ALV_OUTPUT-expendda = LIST_OUTPUT-vendda.
      PERFORM FIND_TRAINING TABLES QUALI_TAB EVENT_TAB COLLECTED_EVENTS
                USING $PLVAR $GDATE H_EVENTS H_QUAL.
          IF NOT EVENT_TAB[] IS INITIAL.
            READ TABLE COLLECTED_EVENTS WITH KEY
                                 QUALID = LIST_OUTPUT-QUALID.
            IF SY-SUBRC = 0.
              ALV_OUTPUT-ICON_S_EVENTS = ICON_BOOKEVENT.
            endif.
          ENDIF.
          Append ALV_OUTPUT.
          h_tabix1 = h_tabix1 + 1.
          READ TABLE list_output INDEX h_tabix1
                     COMPARING otype sobid.
        endwhile.
      endif.
    endloop.
endloop.
check if indicator for qualification view is set
IF h_qual = 'X'.                                          "note 956731
    SORT alv_output by qualid OTYPE SOBID ptype pobid       "note 956731
    expbegda expendda.                                      "note 956731
ELSE.                                                     "note 956731
    SORT alv_output by OTYPE SOBID ptype pobid qualid expbegda expendda.
ENDIF.                                                    "note 956731
DELETE ADJACENT DUPLICATES FROM ALV_OUTPUT COMPARING OTYPE SOBID ptype
    pobid qualid expbegda expendda.
stext_AQ und icon-Feld noch nicht gefüllt
    perform PREPARE_TOP_OF_LIST.
    perform Build_FIELDCAT using GT_FIELDCAT[] H_EVENTS.
    perform ALV_LAYOUT USING alv_layout.
    G_REPID          = SY-REPID.
    G_VARIANT-REPORT = G_REPID.
    PERFORM EVENTTAB_BUILD USING GT_EVENTS.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
    I_INTERFACE_CHECK        = 'X'
        I_CALLBACK_PROGRAM       = G_REPID
    I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
        I_CALLBACK_USER_COMMAND = ALV_USERCOMMAND
        I_STRUCTURE_NAME         = 'HRPDV_EXPIRED_Q'
        IS_LAYOUT                = ALV_LAYOUT
        IT_FIELDCAT              = GT_FIELDCAT[]
    IT_EXCLUDING             =
    IT_SPECIAL_GROUPS        =
    IT_SORT                  =
    IT_FILTER                =
    IS_SEL_HIDE              =
        I_DEFAULT                = 'X'
        I_SAVE                   = 'A'
        IS_VARIANT               = G_VARIANT
        IT_EVENTS                = GT_EVENTS
    IT_EVENT_EXIT            =
    IS_PRINT                 =
    IS_REPREP_ID             =
    I_SCREEN_START_COLUMN    = 0
    I_SCREEN_START_LINE      = 0
    I_SCREEN_END_COLUMN      = 0
    I_SCREEN_END_LINE        = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER =
      ES_EXIT_CAUSED_BY_USER   =
      TABLES
        T_OUTTAB                 = ALV_OUTPUT
      EXCEPTIONS
          PROGRAM_ERROR            = 1
          OTHERS                   = 2 .
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
*&      Form FIND_TRAINING
      text
     -->P_QUALI_TAB text
     -->P_EVENT_TAB text
     -->P_$PLVAR text
     -->P_GDATE text
     -->P_H_EVENT text
     -->P_H_QUAL text
FORM FIND_TRAINING TABLES P_QUALI_TAB STRUCTURE QUALI_TAB
                           P_EVENT_TAB STRUCTURE EVENT_TAB
                           P_COLLECTED_EVENTS STRUCTURE COLLECTED_EVENTS
                   USING   VALUE(P_$PLVAR) LIKE P1000-PLVAR
                           VALUE(P_GDATE) LIKE P1000-GDATE
                           VALUE(P_H_EVENT) TYPE ANY
                           VALUE(P_H_QUAL) TYPE ANY.
IF NOT P_H_EVENT IS INITIAL.
    READ TABLE EVENT_TAB INDEX 1 TRANSPORTING NO FIELDS.
    IF SY-SUBRC <> 0.
      CLEAR P_EVENT_TAB. REFRESH EVENT_TAB.
      CLEAR P_COLLECTED_EVENTS. REFRESH P_COLLECTED_EVENTS.
      IF EVENT = FALSE.
        EVENT = TRUE.
      ELSE.
        EVENT = FALSE.
      ENDIF.
      CALL FUNCTION 'RHPH_FIND_TRAINING_FOR_QUAL'
           EXPORTING
                PLVAR            = PCHPLVAR
                GDATE            = SY-DATUM
              GET_NAME         = 'X'
           TABLES
                QUALI_TAB        = QUALI_TAB
                TO_Q_TAB         = EVENT_TAB
          EXCEPTIONS
               NO_QUALIFICATION = 1
               NO_OBJECT_FOUND = 2
               TECHNICAL_ERROR = 3
               OTHERS           = 4.
      IF SY-SUBRC = 0.
the found qualifications are picked up into table event_tab
      ENDIF.
      IF SY-SUBRC = 1.
        MESSAGE S015.   "Zu den Eingaben wurden keine Daten gefunden
      ENDIF.
      IF SY-SUBRC > 2.
        EXIT.
      ENDIF.
collect events when there are double.
Veranstaltungen kollektieren, Können mehrfach auftauchen, da
verschiedenen Qualifikationen von gleichen Veranstaltungen vermittelt
      LOOP AT P_EVENT_TAB INTO P_COLLECTED_EVENTS.
        APPEND P_COLLECTED_EVENTS.
      ENDLOOP.
      SORT P_COLLECTED_EVENTS BY QUALID STEXT.
    ENDIF.
ENDIF.
ENDFORM.                               " FIND_TRAINING
*&      Form PREPARE_TOP_OF_LIST
      text
--> p1        text
<-- p2        text
FORM PREPARE_TOP_OF_LIST.
DATA ALV_TOP_OF_LIST TYPE SLIS_LISTHEADER. "typ, key, info
DATA STEXT LIKE HRPDV_SUCCESSOR_VIEW-TTEXT.
DATA P_SUBRC LIKE SY-SUBRC.
DATA P_STEXT LIKE T777O-OTEXT.
DATA l_tabix like sy-tabix value 0.
DATA: h_counter TYPE i.                             "note 730486
ALV_TOP_OF_LIST-TYP = 'H'.
ALV_TOP_OF_LIST-INFO = TEXT-REQ.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
Organisationseinheit
ALV_TOP_OF_LIST-typ = 'S'.
Read text for organisationunit
PERFORM READ_TEXT_OTYPE_T777O(SAPLRHP0) USING SY-LANGU $ORGEH
                                                P_STEXT P_SUBRC.
ALV_TOP_OF_LIST-key = P_STEXT.
fill buffer for read organisation-text
CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
     EXPORTING
          CHECK_STRU_AUTH = 'X'
          WITH_EXTINT     = ' '
       TABLES
            OBJECTS         = OBJECTS.
loop at objects for multipleselection
clear h_counter.                          "note 730486
LOOP AT OBJECTS.
    $OBJID = OBJECTS-SOBID.
    CALL FUNCTION 'RH_READ_OBJECT'
         EXPORTING
            PLVAR           = OBJECTS-PLVAR
            OTYPE           = OBJECTS-OTYPE
            OBJID           = $OBJID
         IMPORTING
          SHORT           = short
            STEXT           = STEXT
         EXCEPTIONS
            NOT_FOUND       = 1
            OTHERS          = 2.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF h_counter >= 15.                               "note 730486
      MOVE '( ... )' TO ALV_TOP_OF_LIST-INFO.         "note 730486
      APPEND ALV_TOP_OF_LIST TO gt_alv_list_top_of_list.
      "note 730486
      EXIT.                                           "note 730486
    ENDIF.                                            "note 730486
    CONCATENATE $ORGEH OBJECTS-SOBID STEXT INTO
    ALV_TOP_OF_LIST-INFO SEPARATED BY SPACE.
    APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
    CLEAR ALV_TOP_OF_LIST.
    ALV_TOP_OF_LIST-typ = 'S'.
    l_tabix = l_tabix + 1.
    ADD 1 TO h_counter.                         "note 730486
ENDLOOP.
CLEAR ALV_TOP_OF_LIST.
ALV_TOP_OF_LIST-TYP = 'S'.
ALV_TOP_OF_LIST-key = TEXT-003.
WRITE PCHBEGDA TO ALV_TOP_OF_LIST-INFO.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
clear ALV_TOP_OF_LIST-INFO.
ALV_TOP_OF_LIST-key = TEXT-004.
WRITE PCHENDDA TO ALV_TOP_OF_LIST-INFO.
Append ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
ENDFORM.                               " PREPARE_TOP_OF_LIST
*&      Form BUILD_FIELDCAT
      text
     -->P_GT_FIELDCAT[] text
FORM BUILD_FIELDCAT USING P_GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
                           P_H_EVENTS.
DATA: WA_FIELDCAT LIKE LINE OF P_GT_FIELDCAT.
DATA: P_REPNAME LIKE SY-REPID,
        L_TABIX LIKE SY-TABIX.         "local variable for sy-tabix.
P_REPNAME = SY-REPID.
Erstellen des Feldkataloges
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
     EXPORTING
           I_PROGRAM_NAME         = P_REPNAME
           I_INTERNAL_TABNAME     =
           I_STRUCTURE_NAME       = 'HRPDV_EXPIRED_Q'
           I_CLIENT_NEVER_DISPLAY = 'X'
           I_INCLNAME             = PRONAME
     CHANGING
           CT_FIELDCAT            = P_GT_FIELDCAT
     EXCEPTIONS
           INCONSISTENT_INTERFACE = 0
           PROGRAM_ERROR          = 0
           OTHERS                 = 0.
LOOP AT P_GT_FIELDCAT INTO WA_FIELDCAT.
    l_tabix = sy-tabix.
    CASE WA_FIELDCAT-FIELDNAME.
      when 'OTYPE'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'SOBID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'STEXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'PTYPE'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'POBID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'PSHORT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'PTEXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'QUALID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'QUALSTXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'EXPBEGDA'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'EXPENDDA'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'ICON_S_EVENTS'.
        IF P_H_EVENTS IS INITIAL.
          WA_FIELDCAT-NO_OUT = 'X'.
        else.
          WA_FIELDCAT-DDICTXT = 'X'.
        endif.
    ENDCASE.
    MODIFY P_GT_FIELDCAT FROM WA_FIELDCAT INDEX l_tabix.
ENDLOOP.
ENDFORM.                               " BUILD_FIELDCAT
*&      Form ALV_LAYOUT
      text
     -->P_L_ALV_LAYOUT text
FORM ALV_LAYOUT USING    P_ALV_LAYOUT TYPE slis_layout_alv.
build layout
P_LAYOUT-BOX_FIELDNAME = 'MARK_X'.   "fieldname for checkbox
P_ALV_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
P_ALV_LAYOUT-BOX_TABNAME   = ALV_OUTPUT.   "tabname for checkbox
p_ALV_layout-info_fieldname = 'ALV_COLOR'.
ENDFORM.                               " ALV_LAYOUT
FORM eventtab_build USING
FORM EVENTTAB_BUILD USING RT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
APPEND LS_EVENT TO RT_EVENTS.
ENDFORM.                    "EVENTTAB_BUILD
*FORM TOP_OF_PAGE
FORM TOP_OF_PAGE.                                           "#EC CALLED
NEW-PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = GT_ALV_LIST_TOP_OF_LIST[].
ENDFORM.                    "TOP_OF_PAGE
      FORM USER_COMMAND                                             *
USER_COMMAND for the list of successor view                         *
--> r_ucomm                                                       *
--> rs_selfield                                                   *
FORM USER_COMMAND USING ALV_UCOMM LIKE SY-UCOMM
      RS_SELFIELD TYPE SLIS_SELFIELD.                       "#EC CALLED
DATA: SELECTED_LINE LIKE HRPDV_expired_q.
DATA: SOBID_QUA LIKE P1000-OBJID.
DATA: LT_PERS_TAB LIKE HRSOBID OCCURS 0 WITH HEADER LINE.
CASE ALV_UCOMM.
    WHEN '&IC1'.                       "per Doppelklick auswählen
      READ TABLE ALV_OUTPUT INDEX
      RS_SELFIELD-TABINDEX INTO SELECTED_LINE.
      CASE RS_SELFIELD-FIELDNAME.
        WHEN 'POTYPE' or 'POBID' or 'PTEXT' or 'OTYPE' or 'SOBID' or
'STEXT' or 'QUALID' or 'QUALSTXT' or 'EXPBEGDA' or 'EXPENDDA'.
          READ TABLE ALV_OUTPUT INDEX RS_SELFIELD-TABINDEX INTO
                Help_output.
          IF SY-SUBRC <> 0.
            MESSAGE S027.               "Bitte gültige Zeile auswählen
            EXIT.
          Endif.
     IF ALV_OUTPUT-SOBID IS INITIAL.
       MESSAGE S015. "Zu den Eingaben wurden keine Daten gefunden
     ELSE.
     converte the variable because of the different types
     SOBID_QUA = SELECTED_LINE-SOBID_QUA.
          CALL FUNCTION 'RHPP_SHOW_PROFILE'
            EXPORTING
              PLVAR        = pchplvar
              OTYPE        = SELECTED_LINE-PTYPE       "XSC
              OBJID        = SELECTED_LINE-POBID       "XSC
              BEGDA        = PCHBEGDA
              ENDDA        = PCHENDDA
              MAINTAIN     = ' '
            EXCEPTIONS
              NO_AUTHORITY = 1
              NOT_FOUND    = 2
              OTHERS       = 3.
          CASE SY-SUBRC.
            WHEN 0.
            All right.
            WHEN 1.
              MESSAGE S015.
            Zu Ihren Eingaben konnten keine Daten gefunden werden!
            WHEN 2.
              MESSAGE E000.
            Dazu haben sie keine berechtigung!
            WHEN OTHERS.
              MESSAGE E008.
            Es ist ein unvorhergesehener Fehler aufgetreten.
          ENDCASE.                     "sy-subrc.
          CLEAR ALV_OUTPUT.
   ENDIF.    "IF ALV_OUTPUT-SOBID IS INITIAL.
   CLEAR ALV_OUTPUT-SOBID.
        when 'ICON_S_EVENTS'.
          IF SELECTED_LINE-ICON_S_EVENTS IS INITIAL.
            MESSAGE S027.              "Bitte gültige Zeile auswählen
            EXIT.
          ENDIF.
          CLEAR LT_PERS_TAB.
          REFRESH LT_PERS_TAB.
          LT_PERS_TAB-PLVAR = pchPLVAR.
          LT_PERS_TAB-OTYPE = SELECTED_LINE-PTYPE.          "XSC
          LT_PERS_TAB-SOBID = SELECTED_LINE-POBID.          "XSC
          APPEND LT_PERS_TAB.
          SOBID_QUA = SELECTED_LINE-QUALID.
          CALL FUNCTION 'RHPP_SHOW_SUGGEST_EVENTS'
          EXPORTING
            P_PLVAR      = pchPLVAR
            P_SOBID_QUA = SOBID_QUA
          P_PROFCY_REQ = SELECTED_LINE-RATING_REQ
            P_GDATE      = sy-datum
          TABLES
          EVENT_TAB    =
            PERS_TAB     = LT_PERS_TAB.
      endcase.
      CLEAR SELECTED_LINE.
ENDCASE.                             "case sy-ucomm
CLEAR SY-UCOMM.
ENDFORM.                    "USER_COMMAND

Pls be more specific in your question. If you want to include an extra field in your alv output, then read the field catalog table you created through "Reuse_alv_fieldcatalog_merge" and then add an extra entry in it giving the details of the field you want to add.. and then call the "resuse_alv_grid_display",
Hope this helps. To be able to help you in a better way, kindly revert with any specific issue.
Reward if helpful,
Karan

How do I get an Apple License to add Mac functions to the keyboard my company manufactures?

I'm writing to inquire about the process for obtaining a VID license to add mac functions to the keyboard my company manufactures. I've called serveral numbers (Apple Support, Apple Software Licensing, Apple Legal, Apple Corporate, Apple Developers, etc as well as emailed all these departments and more) with no response or instructions on how to move forward. Is what we're hoping for even possible???
The mac functions we want to add to our keyboard are: the ability to touch one key to open the dashboard, same for the expose feature- rather than needing to press two keys- fn plus the F1-F12 key needed (this is a mac function that can be set up in the control panel on any mac). We would like our keyboards to be work in this manner, just as a mac keyboard would.
We do not need to use the Dashboard or expose keycap images (I already know there are no current licenses for those), just the functions.
Does anyone know the process for obtaining this sort of license? The cost? Any information would be helpful. I've been put on hold for over two hours, on several occassions, lead to empty voicemail systems that lead to no-one, and written over a dozen emails with only automated responses- none of which applicable to our question.
I just want to know if this is possible ! Please help!
Thank you in advanced.

"...you don't have to press two keys to do any of that on a Mac keyboard." That is our goal, we are not a mac keyboard, but manufacture PC and Mac compatible keyboards.... since we are not an apple product, to utilize those hot and media keys we've had to press fn first...
we want our next keyboard release to do as mac keyboards do and by that only press one button for those functions. We are advised to first recieve apple permissions to manufacture a keyboard like this.
Also, I have been all over the site linked above, I've emailed and called these guys several times (from the link):
Apple Inc.
Software Licensing Dept
12545 Riata Vista Circle
MS:198-3SWL
Austin, TX 78727
(also their phone is 512.674.2645)
No one there has been able to answer my question, or be able to offer any help regarding this type of license (contrary to the department name).
Thanks for responding, but unfortunately it doesn't really help us answer our question.

How do you "Add a Device" from the iOS remote app multiple times?

Anyone know a way to trigger the "Add a device" feature in the iOS remote app after you've already added one?
I have multiple Apple TVs scattered around the house and multiple people who would like to use them. I have home sharing set up through my Apple ID so this works great for me. For everyone else, I'd rather not sign my account in on their devices, even if its just for home sharing. They can "Add a device" in the remote app to connect to one of the Apple TVs, but only one.
I'm using iOS 8, iPhone 5s and 6, Apple TVs 2nd and 3rd Gen

I would rather not sign my account into other people's devices.
As I mentioned, I already have my own devices signed into home sharing.
Alternatively, is there a way to get an Apple TV attached to multiple home sharing accounts?
If there is, I could have each of the people in my household set up home sharing on their own accounts.

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

Add Azure VM to the Perfmon

Similar Messages

Maybe you are looking for