Add BUS2009 to generic object services

Hi Experts,
We have header level release strategy to PR approval. We are using BUS2105 delegated to ZBUS2105.
There is another custom workflow has been defined, using BUS2009 delegated to ZBUS2009.
in ME53n, Generic object services I can only see ZBUS2105 Workflows.
Is there any method I can add show both the workflows there.
Your help is much appreciated.
Thanks,
Gaurav

Ya Arghdip, please elaborate how to instantiate the object inside the workflow design using GenericInstantiate Method of SYSTEM Business Object.
in my case I am getting required entries in table but even thn I am not able to see workflow overview from Generic Object Services.
Please help.
Regards
Nitin

Similar Messages

Show originally filename in attachment list (generic object services)

Hello everybody,
does anybody know, if it is possible to show the originally filename of a document in the attachment list of generic object services?
If I add more than one document for the same document type in generic object services, I'm not able to distinguish the documents.
When I want to save an attachment to local PC, SAP offers me the originally filename as default. Therefore, the filename has to be saved somewhere...
Thanks for any help or ideas in advance,
Peter

Richard,
Your using the wrong object, I don't have access to an SAP system right now, so I can't tell you what the correct object is, but when it's configured correctly in OAC3 it will not be grey out. Best thing to do it see what the object the program is publishing. This is what GOS is looking for. IFARCH21 is not the answer, unless your using workflow

Adding Generic Object Services attachments to PRA trans O3U_DO3

I would like to add the generic object services attachment menu that is found in vf02 - invoice create to the production and revenue accounting module transaction O3U_DO2/O3U_DO3 Maintain/Display DOI Owners. I need the ability to attach external documents through archive link to this transaction. If not possible with generic object services, any other suggestions on how to attach the documents is greatly appreciated.

Hi,
Welcome to the SDN Forums!!!
You need to supply the PC file extension in the container element 'DOCUMENTTYPE'.
swc_set_element lt_message_container 'DOCUMENTTYPE' p_msgtyp.
In your case change the above statement as below:
swc_set_element lt_message_container 'DOCUMENTTYPE' 'pdf'.
<b>OR</b> change the default value of p_msgtyp to 'PDF'.
Cheers,
Ramki Maley.
Please reward points if the answer is helpful.
For info on awarding points click on this link: https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.htm
Message was edited by: Ramki Maley

Events available in Generic Object Services (GOS)?

Hello everybody
Searched around in SDN and also tried to find something useful in our system (SWO1) but can't find useful information on GOS events so I guess it probably doesn't exist?
I'm searching a way to catch GOS events when someone adds, changes or deletes an attachment (URL) in the generic object services of an object, e.g. for a material master (BUS1001006). I'd like to create a change document for this and based on that to trigger some further processing for one of our interfaces.
Anybody out there knowing how to achieve this?
TIA and best regards,
Renaud

There's a couple of BaDIs with GOS names such as GOS_SRV_REQUEST that might help. Otherwise I'd try using SE30 with lots of logging options set on to trace where you may be able to grab this info from. GOS subscriptions may be another thing to look at.
Jonathan

Attachments Activating Generic Object Services (GOS) in VA41/VA42 at item level

Hi to All,
I'm trying to manage attachments for sales document at item level.
I've already read this wonderfull post (Activating Generic Object Services Toolbar in SAP Objects) but I didn't understand how manage attachments at item level.
Please, if anyone has ideas of how to achieve it please share solutions.
Thanks & Best Regards,
Umberto

Hi again,
Thanks for the answers, they were very helpful,
but the customer isn't happy with the "Store business Documents" and it's Drag n' drop interface.
I'm to develop a new GOS menu item, that will show
a normal Open File dialog, and a following popup
where the user can change the document title shown
in the Attachment list.
ARCHIVOBJECT_CREATE_FILE and ARCHIVOBJECT_GET_TABLE
along with ARCHIV_CONNECTION_INSERT should probably
cover the functionality I need.
I know both the BOR type ID and the object ID is
available to me in the Execute() method of the GOS menu handler I'm overriding, but for the ARCHIV_CONNECTION_INSERT, I'm supposed to supply an AR_OBJECT parameter (I know that this information is stored in the TOAOM table), but I have no clue where to get this information for the current object I'm trying to add an attachment for.
Regards,
Lars Wilhelmsen

Generic Object Services (GOS) + ArchiveLink against IXOS.

Hi all,
I'm currently working on a project where I'm supposed to extend the Generic Object Services (GOS) Icon with a menu item for storing documents down to IXOS through ArchiveLink, and a functionality for retrieving them / attaching them to an email.
So far, I concluded that I need to create a class, whose superclass is CL_GOS_SERVICE, and at least override the EXECUTE() method with some functionality.
The ARCHIVOBJECT function group contains some (probably)
useful function modules - like ARCHIVOBJECT_CREATE_FILE and ARCHIVOBJECT_GET_BYTES / ARCHIVOBJECT_GET_TABLE.
My problem so far is that I don't see the "connection",
ARCHIVOBJECT_CREATE_FILE takes ARCHIV_ID, DOCUMENT_TYPE
and PATH as arguments (parameters), and returns ARCHIV_DOC_ID - an unique ID to the stored document
But how is the link between the archived document and the business object (i.e. the current object of the transaction I'm in) maintained?
Thanks in advance,
regards,
Lars Wilhelmsen

Hi again,
Thanks for the answers, they were very helpful,
but the customer isn't happy with the "Store business Documents" and it's Drag n' drop interface.
I'm to develop a new GOS menu item, that will show
a normal Open File dialog, and a following popup
where the user can change the document title shown
in the Attachment list.
ARCHIVOBJECT_CREATE_FILE and ARCHIVOBJECT_GET_TABLE
along with ARCHIV_CONNECTION_INSERT should probably
cover the functionality I need.
I know both the BOR type ID and the object ID is
available to me in the Execute() method of the GOS menu handler I'm overriding, but for the ARCHIV_CONNECTION_INSERT, I'm supposed to supply an AR_OBJECT parameter (I know that this information is stored in the TOAOM table), but I have no clue where to get this information for the current object I'm trying to add an attachment for.
Regards,
Lars Wilhelmsen

Generic Object Services with SAPGui Classic Theme

Dear Experts,
the button for Generic Object Services is available in different transactions like VA03, ME23N, etc. We are facing now the problem that if a user has in his SAPGui the "Classic Theme" choosen the button for the GOS is not visible. The services can be only accessed through the menu (System->Services for Object)
With other SAPGui Themes the GOS button is visible.
We are using SAP Logon 720 Patch-Level 4.
Thank you for your help.
Regards,
Milan

Hi again,
Thanks for the answers, they were very helpful,
but the customer isn't happy with the "Store business Documents" and it's Drag n' drop interface.
I'm to develop a new GOS menu item, that will show
a normal Open File dialog, and a following popup
where the user can change the document title shown
in the Attachment list.
ARCHIVOBJECT_CREATE_FILE and ARCHIVOBJECT_GET_TABLE
along with ARCHIV_CONNECTION_INSERT should probably
cover the functionality I need.
I know both the BOR type ID and the object ID is
available to me in the Execute() method of the GOS menu handler I'm overriding, but for the ARCHIV_CONNECTION_INSERT, I'm supposed to supply an AR_OBJECT parameter (I know that this information is stored in the TOAOM table), but I have no clue where to get this information for the current object I'm trying to add an attachment for.
Regards,
Lars Wilhelmsen

Query about generic object services

hi,
In the system that I'm using there's an generic object service added to a transaction through an SAP Note. The code added to that transaction through that service, I want to add it to another transaction. How do I do that.

if you want to do it for your custom transaction, just call the following FM in PBO
call function 'SWU_OBJECT_PUBLISH'
       exporting
            objtype           = '<obj type>'
            objkey            = ''
       exceptions
            objtype_not_found = 1
            others            = 2.
read the FM documentation from SE37.
if you still have doubt , get back with your questions.
Regards
Raja

How to create a Generic Object Services for a standard tcode.

Hi,
We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this audit train we have been asked to use "Generic Object Services" in transaction code ABAA.
Unfortunately, Generic object services are not available in this transaction code. Can you please suggest me how to create "Generic Object Services" for a particular standard transaction code. Also, we have show the details of custom workflow that follows the approval process in order to depreciate the asset. how to show this workflow details using Generic Services. This is a very critical issue, any help will be very help ful.
Please let me know should you require more information on this topic.
Thanks,
Ashish

Instead of copyg the std fm to z, do the following,
1. Go to se37 open FM VIEW_KURGV in display mode.
2. Click on the spiral icon on the top.
3. Then in menu go edit->enhancment options -> show implicit enhancement
4. """""""""""""""""""""" kind of lines will appear in the cde, just rt click on the line at the place u want to insert the code and select
enhancement implementation create.
5. Give apropriate name for thi , it will inset a n place to write your code.
This is an std sap methodology and is supported in upgradde also.

Create Attachments to Generic Object Services from Webdynpro appliccation

Hi,
I have requirement to Create Attachments to Generic Object Services(GOS) in equipment master (IE03) from webdynpro when a user clicks on upload button and also allow the user to delete the attachments .
Can anyone advice me of any Function Modules or logic to use from Web GUI.
I used below logic from R/3 to create attachments, but from webdynpro this method doesn't work.
DATA lo_attachment TYPE REF TO cl_gos_document_service.
CREATE OBJECT lo_attachment.
CALL METHOD   lo_attachment->create_attachment
       EXPORTING is_object = ls_object
       IMPORTING ep_attachment = lp_attachment
Your inputs are appreciated.
Thanks
Rajesh Yalda

Hi,
try using the Class CL_GOS_SRV_ATTACHMENT_CREATE with Method EXECUTE_ITS.
best regards,
Michael

How to use Generic Object Services(GOS) for each table control record.

Dear Expert,
I am using generic object services for document attachment but i am facing a problem while attaching document to a table control row. my requirement is to attach separate document for each and every row of table control but i am unable to attach document row wise of the table control.for each row GOS should display corresponding attached document not all the attached document.
Thanks in Advanced
Bhuwan Tiwari
Edited by: BHUWAN TIWARI on Feb 8, 2011 4:16 PM
Edited by: BHUWAN TIWARI on Feb 8, 2011 4:16 PM

You haven't explained what object and object key you're using, nor have you provided any indication of how you implemented the GOS attachment functionality. You need to provide more information to resolve an issue like this.

Attach Documents to Custom Program Using Generic Object Services

Hi There,
         I created Object type ZGOS and used in the custom program, when i try to attach documents it allows and then shows in attachment list.
        But When I use that program next time that document attached is not available.
Is there any separate save Class or FM available for saving the document to the specified custom program.
I am using following code in the program,
CLEAR obj.
SET OBJECT TYPE TO 'ZGOS'
obj-objtype = objtype.
SET OBJECT KEY = REPORT NAME
SELECT SINGLE name
FROM trdir
INTO obj-objkey
WHERE name = sy-repid.
CALL GOS MANAGER WITHOUT CONTAINER (WILL BE DISPLAYED IN THE TOOLBAR)
CREATE OBJECT manager
    EXPORTING
      is_object = obj
    EXCEPTIONS
      OTHERS    = 1.
Thanks in advance.

Check the Naimesh Patel Blog he explain very well
http://help-abap.blogspot.com/2009/02/generic-object-services-gos-toolbar.html

Display and Manage Attachments of Generic Object Services in Webdynpro

Hi All,
I need to have a button in the webdynpro that when a user clicks it will pop up a table that display a list of files already attached to a Generic Object Services(GOS) and also allow the user to delete the attachments and upload new attachments.
Can anyone advice me of any Function Modules or Methods that i can use to achieve those functions (retrive and display attachments in the GOS, delete existing attachment from GOS, upload new attachment to GOS).
Thanks and Regards,
weilong

Hi
You need to pass parameters as per the code below
****Data Types
CONSTANTS:lc_dokob        TYPE dokob VALUE 'KNA1',
              lc_dokar      TYPE dokar VALUE 'LEG',
              lc_dappl      TYPE dappl VALUE 'BVO',
              lc_sign       TYPE c VALUE 'I',
              lc_option(2) TYPE c VALUE 'EQ',
              lc_docpart(3) TYPE c VALUE '000',
              lc_docversion TYPE dokvr VALUE '00',
              lc_status     TYPE dokst VALUE 'AL',
              ls_attc-doknr    TYPE doknr,
              ls_return TYPE bapiret2,
*****Function Module
CALL FUNCTION 'BAPI_DOCUMENT_DELETE_DIRECT'
        EXPORTING
          documenttype    = lc_dokar
          documentnumber = ls_attc-doknr
          documentpart    = lc_docpart
          documentversion = lc_docversion
        IMPORTING
          return          = ls_return.
Thanks
Vishal

Generic Object Services for a standard transaction code

Hi,
We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this audit trail we have been asked to use "Generic Object Services" in transaction code ABAA.
Unfortunately, Generic object services are not available in this transaction code. Can you please suggest me how to create "Generic Object Services" for a particular standard transaction code. Also, we have show the details of custom workflow that handles the approval process in order to depreciate the asset. How to show this workflow details using Generic Object Services. This is a very critical issue, any help will be very help ful.
Please let me know should you require more information on this topic.
Thanks,
Ashish

Hello Ashish,
i dont think activating of GOS will solve ur probs..... GOS wont create a WF item ...... try to get some kind of GOS before u do anything in SAP systems.
u can do like this ......
1 create custom screen where u can enter asset details and store in custom tables....and generate one custom doc.number to track.
2. trigger WF when user submits it for approvals.
3.Upon final approvals.--->run BDC to do postings......
4.Give a Option to attach documents to the parking documents. ( that GOS ).
regards
Prabhu

Generic Object Services - Relationships

Hello Everyone,
In 4.6c when i go to VA02 Transaction, i see in the top left corner GENERIC OBJECT SERVICES BUTTON.
This button has options like Create Attachment, Private Notes, Send Object with Note, Relationships, etc.
Using one of the button in this Generic Object services, that is, RELATIONSHIPS i need to see all the Outbound IDocs and all the Inbound IDocs pertaining to that sales order through which we have logged into VA02 transaction.
Right now, the Relationship button is disabled, I need to know how do i enable it and when clicked what do i need to do inorder for the IDocs to be displayed.
This is in 4.6c and not in ECC.
Your help is appreciated.
Thanks

Dear Bob Schmidt
After your post, I too tried the Additional links and the end result was same as you got :-((.
Tried to get some links but not sure, whether these links will be of helpful to you.
[Enable Links in the Tool Area|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/501f3154-b66c-2910-0988-bd9b2440d018]
[Navigation Between Views|http://help.sap.com/saphelp_nw70/helpdata/en/42/bb8c6cc7131d67e10000000a1553f6/content.htm]
In the second link, at the bottom some information is given on Additional link but not sure, whether it is related to sale order Additional link )
thanks
G. Lakshmipathi

Add BUS2009 to generic object services

Similar Messages

Maybe you are looking for