Add clip using previous clip video settings (transform/crop/distort)

Hi everyone!
I made a slideshow of five images for a certain car wax called "Glacier". I am now going to use the same slideshow but replace the images for another car wax called "Concorso". Therefor I need to replace the images of this Lambourgini with images of a Mercedes. How do I replace images/clips and reusing the video settings? When I trying to replace, it resets the video settings accordingly to the new image (of the Mercedes) which is a 1920x1080 px image. I would be very grateful for some help, this is my first post in the community. A question I asking me is; should I make the slideshow in Motion 5?

Tom Wolsky wrote:
CCopy the image you're going to replace. Use the shortcut to do the replace edit and then use Shift-Cmd-C to paste attributes to the replaced clip.
Maybe it is obvious, but I think you meant to write Shift-Cmd-V :-)

Similar Messages

  • Hi, I'm using imovie 11, I want to delete a clip video at the end of the project, but keep the audio, everytime  I delete the video, the audio is also deleted, please help!

    Hi, Excuse my English, I'm using imovie 11, I want to delete a clip video at the end of the project, but keep the audio over the fade to black, everytime  I delete the video, the audio is also deleted, please help!

    I assume you are trying to end the clip/project with a fade to black, or something that just doesn't cut so instant.
    One thing i'm thinking you can try is to Add a "Transition Clip" to the end, and try your first method. (with Detached Audio + Delete Selection. (Yellow highlight was deleted selection) Do you need something to end like this?
    If you can, put screenshot up (Shift+Comm+4), if i'm not on the right idea. It seems like an easy fix, with a few ways of doing it. You can also add a blank image to end project, sub titles or Add,Cutaway fade +Opacity adjust.

  • Using You Tube video clips question:

    After importing several clips from You Tube (of varying quality) to incorporate into an editing project, the clips look okay and play  full screen, in the "source" window, but when I put them in the timeline and play them in the "program" window, they are thumbnail size.  Why does this happen? I tried converting...but still no luck.

    JSS1138 wrote:
    Re: Using You Tube video clips question:
    The short answer here is, don't.  (Assuming that if it was yours in the first place, you'd have the original and not have to use the upload.)
    And Bill, you should know better than to help someone violate copyright law.
    yeah, i beg to differ on this. i have 100s of videos on youtube i did back when it first started before i saved my finished projects... (from 2005-2008 i would just record, edit, post, delete, because it was just random junk of me hanging out with friends, or just v-logging about stuff i needed to blow steam about) so one of these days i'll have to go through and download them and burn them for archives. Never say never

  • Anyone success. used ADS Tech DVDXPress box on a PC to add clips to iMovie?

    I have an ADSTech DVXPress box (PC Only) that I am using to pull video off a VCR... has anyone here been able to successfully pull video from a PC with this box and import it into IMovie HD (6?)on a Mac?
    I am using a Dell 2.89 Ghz with the DVDXPress box and a MacBook Pro 2.0 with Quicktime Pro and MPEG 2 import.
    I can view the files I create on the Mac, but they just don't import into iMovie. It says 'Importing Clip...' then the box closes and nothing happens.

    I still don't understand this communication system very well, but I solved the problem with the Sansa Clip by myself, no thanks to Applecare, Sansa Clip Support, or my local Apple re-seller. the Clip must be set to MSC, not MTP format. Then the clip icon appears on the desktop. Down load the selected MP3 book from the public library using OverDrive Media Console. Open Itunes  and the book should appear in the ITunes Music folder. Highlight all parts of the book and drag into the Sansa Clip player icon on the desktop. I did two books but had a hard time hitting the Audiobooks folder and the books are in different folders but I listened to a bit of each one and they work fine! It only took about 10 frustrating hours. THanks to RKaufmann87 for using the word "format" which served as a clue to me.

  • I created my first movie using one long video (all photos) clip created in Keynote and imported to Imovie.  I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original but retain the audio. Can I?

    I created my first movie using one long video (a montage of photos) clip created in Keynote and imported to Imovie.  I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original video, but retain the audio. Can I?  And if so, how.  I cant seem to
    find the info anywhere in help.

    I would suggest that you go to iMovie/Preferences and make sure that Advanced Tools are enabled.
    Then, you can drag your new video clip on top of your old clip and a popup menu should appear. Choose REPLACE.

  • How can I permanently clip video without changing filmstrip order?

    I have just recently upgraded from LR1.4 to 4.2 (Windows 7 OS) and one of the features I am most excited about is being able to work with video in LR. I started clipping videos but I know LR is non-destructive. This is great for my photography but with videos I am trying to actually make the files smaller by saving only the footage that I want. So I exported to the original folder and figured I could then just delete the original unclipped file and be all set. Only problem is the exported file now appears at the end of my filmstrip since it is dated today. If I stack it it goes with the original file, but since I was planning on deleting the original file that wont help me. This is different from the way photos behave (though I'm not exporting generally there, I'm editing a copy in photoshop, and that keeps the capture time metadata and thus stays in its appropriate spot in the filmstrip). I tried copying metadata from the original file or even manually changing capture time but nothing seems to be effective. Please help!

    I use a much, much older iMovie so I don't know exactly how the new one works, but until somebody else replies...  It may be re-encoding the whole .mp4 since some formats cannot be edited without doing that, and you would need to check something like format and quality settings to prevent it from saving to a much higher quality which won't actually make the quality any better than the original anyway.

  • What Video Settings to use in Premiere before adding to Presenter

    I am editing several videos in Adobe Premiere and will then add them to a presentation with Adobe Presenter.  What video settings do you suggest (frame size, codec, container, frame rate, etc.) for use with Presenter. 
    thanks!

    good call, turns out it's not exporting at 500x375 like I tell it to. Instead, it exports to 640x480. The .fla document size is 500x375... yet when I go to quicktime export settings, it says 550x400. And when it finishes export, it's 640x480. huh??
    well, I guess I can make my premiere project 640x480, not going to matter much when the final product is 320x240. I just can't figure out why it insists on exporting to 640x480

  • Problem to import clips video with "Lightning to SD Card Camera Reader", my mini ipad and my camcorder?

    I need import immediatly my clips video from my camcorder in my mini ipad with my SD card.
    Solution: I have to use "Lightning to SD Card Camera Reader"
    Problem: When i insert my Sd card in the "Lightning to SD Card Camera Reader", my mini ipad don't recognize the sd card... And i'm sure the format of clips video is accepted by ipad (specs).
    I know why my mini ipad don't recognize the sd card... Because the directory where my camcorder put the clips video on the SD card is not accepted by  "Lightning to SD Card Camera Reader". After some research, this device accept only the video in "DCIM" directory.
    So my question: WHO KNOW WHICH CAMCORDER CAN BE ACCEPTED BY  "Lightning to SD Card Camera Reader" WITH CORRECT VIDEO FORMAT (SPECS) AND CORRECT WRITING DIRECTORY "DCIM"?
    Thanx for your help!!!!!

    Since the ipad is not a computer it cannot be expected to behave as such. The resources are limited  and so are the capabilities. Some things will work just fine but others will not. You have to be  willing to make some compromises and accept some of the limitations, otherwise you will end up being frustrated. Maybe another device will better suite your needs.

  • I would like to freely add clip art in Full Edit Mode in PSE 5.0

    Hello,
    I am new to Photoshop Elements. I have PSE 5.0 on a windows XP platform with service pack 3 installed. I want to be able to create flyers with PSE and would like to freely be able to add various types of clip art into my canvas. I know you can do this when you're creating slides, but I want to be able to do this in PSE full edit mode, not by creating a slide show via the organizer.
    There are tons of clip art online and they have various file types too. I am also wondering if I can use any of the file types as well. The ones that PSE has for the slide shows are .png. But online I have seen .wmf, .mpf, .jpg as well. How can I incorporate all this clip art for use in creating flyers and/or logos by just starting with a blank 8.5 x 11 canvas in full edit mode?
    Any expert help here would be greatly appreciated. I was able to do this using Word, but Word of course lacks the graphic quality and optionality of PSE greatly.
    Sincerely,
    Lee

    Thanks for your reply here Bob. I have read what you mentioned above and am not quite sure how to do it that way. What I have been doing so far is to find a clip art item somewhere, copy it to the clipboard, then bring it into PSE with the File-New-from clipboard command.
    This will bring it into it's own space and Layer as a separate file on it's own. Then I select it, copy the selection to the clipboard once again, move over to my blank canvas which only has one background layer now, and paste it onto this canvas.
    This seems to be working, but I loose the Vector graphic aspect of the clip art image because it converts it to a raster type of image now. So I have to be very careful in resizing it to not loose resolution and such.
    I noticed when I go to create a slide show in PSE, I have access to the graphics palette where you can double click a piece of clip art and it goes right onto your slide and stays as a vector image. I can get to these images while in full-edit mode, but I have to use the file-open command and navigate to the right folder and then open one up into full-edit mode as it's own layer. But then once again, I loose the vector aspect and I have to go through the process of selecting it, copying it to the clipboard and then pasting onto my blank canvas.
    I know that MS Word is no match for this product, but at least there I could easily add clip art to any flyer I am making without loosing the vector aspect. But I know that the quality is so much better here in PSE and that I just need to learn how to utilize more of its functionality and power. Hence why I am writing this post I suppose.
    Isn't there an easier way to get clip art into your blank canvas in full edit mode without having to go through all this and/or without having to create a slide show to get access to this clip art pallete? And having to loose the vector aspect of the clip art is not so wonderful either. Did I buy the wrong Adobe application - Ha!
    Should I be using Illustrator since I want to create flyers using clip art, type and effects?
    My apologies for this long post, but I would really like to be able to utilize, if at all possible, PSE 5.0's full power to create great quality flyers using all these things.
    Thanks again,
    Lee

  • Can I clip videos without compression in Lightroom?

    I have a bunch of high definition *.mov files from my DSLR. Each is a few minutes long and each has one or two short (about 15 second) clips that I would like to keep. My ideal workflow would be to create a virtual copy of the video for every clip I want and then export each of these without losing any video quality. I know I can export to *.mp4 at maximum quality, but I find there is still a loss of quality. In particular the color is dull in the exported clip. I would simply like to clip the video without changing the format, but the only other option in Lightroom seems to be to export the entire video, which is of course not what I want. Given that my camera can clip videos in this manner, I figure LR should be able to also.
    If I can't do this in LR, can I do it with some other Adobe product?

    I think that if you are satisfied with the final quality of your DVD image there is no reason to change the settings. You can adjust to higher bitrates in the settings, but most probably you'll get playback problems in your distributed DVDs.
    If your image is good now, no reason to change it just to take more space !

  • Clips videos on panoramic view (instead of new coverflow) ?

    Hy Guys,
    (Sorry for my bad english).
    I used to play lot of musical clip videos on iPhone 4S ios 6.1.3, and i played them in panoramic mode. Since i install ios 7 it just possible to play in very small view with buttons. When i turn the iPhone i've got the coverflow with all albums instead.
    Is it the same for every one? Could we retrieve this function?

    Well thank you for asking Julien !
    I have the same trouble since updating to ios7 and I was wondering if I was the only one troubled about that. Now we are two !!
    How can Apple sell musical videos on Itunes and not enable watching them full screen on the iPhone ?
    Plus, when you are listening to music with the iPhone in the horizontal position (ie : in the car, using GPS), you don"t have the music control anymore which is REALLY annoying.

  • MPEG Stream Clip Export Settings

    Happy New Year!
    I've been working on a WWII documentary.
    You guys turned me onto a really nifty piece of software which I use occasionally; MPEG Stream Clip
    It's great - just wanna make sure I'm using the right export settings for re-importing a piece of film back into FCP.
    I assumed it was best to export as a Quick Time File rather than a DV. Why? Because it seems the DV export puts compression on the clip. In 'Options' I also choose Apple DVCPRO-NTSC
    Take a look;
    http://www.locationstudio.net/Export-QT.jpg
    http://www.locationstudio.net/100-Per-Cent.jpg
    http://www.locationstudio.net/DV-DVCPRO-NTSC.jpg
    http://www.locationstudio.net/DV.jpg
    Thanx
    Mike

    *just wanna make sure I'm using the right export settings for re-importing a piece of film back into FCP.*
    If you're working in a DV NTSC timeline then you are doing it right. the Streamclip option for dv creates a dv stream which is not the same thing as a DV NTSC Quicktime Movie.
    rh

  • Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.

    Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.
    What can I do to get it to work again as more than an overpriced paperweight?

    Hello,
    Safe Boot from the HD, (holding Shift key down at bootup), see if you can set a good resolution.

  • "The Clip/ Video /Audio adjustment menu doesn't open any more. Was it something I did?"

    "The Clip/ Video /Audio adjustment menu doesn't open any more. Was it something I did?"

    thnx, that was it! Time was OK that why I didn't see it, but date was set to 1/6/2014.

  • Best free app to clip videos

    I tried in imovie but the video file I wanted to clip is an episode so 40 mins long... it started lagging so I was wondering if there was a free program to clip video files for imovie.

    There are several apps allowing to edit (is that was you mean by 'clip'?) video.
    The QuicktimeX player app for example allows to trim clips....
    open your file, hit cmd-T and select the portion of the clip you like to keep.

Maybe you are looking for