Add component in task list

Hello All,
I have an issue with adding component in task list (for example task list number EIMN-68) via transaction IA05.
When I try to add component to operation, I get the message *
Standard BOM PAEIMN-68 4 already exists
Message no. 29771
Diagnosis
You want to create a standard BOM for standard object PAEIMN-68 with usage .
A BOM already exists for this standard object and usage. You cannot extend a standard a standard BOM.
Procedure
Check whether the standard BOM is suitable for standard object PAEIMN-68 and usage . If it is not, you need to create the BOM for another standard object.
Is there any special way to create material master for such components.Whats the solution.
Please help
Cheers
Sunny

Hi Pithan, how are you..
I want to add components.
Just now I was able to add components. I explain how:
When i added component number in operation, and press enter, system gave me the error that standard bom already exist. In the same screen I changed the BOM usage to 3 as universal usage. After this usage only, system allowed me to add components. No other bom usage allowed me to do so.
Also, why system took me to BOM screen if I just want to add components.
I wait for your reply.
thanks and regards
Sunny

Similar Messages

Mass change of component in Task list

Hi Experts
I have thousands of material and there are changes done for them to use them in maintenance order task list as stock or nonstock.
The task is to change the item category (from L to N or from N to L) of those materials used as components in task list and also find out those materials in BOM , Equipment TL and FL TL and change the item category.
1.can this be done using a BDC (checking all task list / BOM for that material and change the item category)
2. table to check component assigned to which operation in task list.
Any help for this requirement
Thanks
Jey

There is no standard transaction for the changing of components in the task lists this would have to be a bespoke program.
If you are looking to change the components allowcated to the Bills of Material you can use transaction CS20 where you can replace the exisitng component category N with the new component category L.
There is transactions for changing the PRT and Work Center if you get your ABAP consultant to have a look at the PRT transaction/program (transaction CA77) he may be able to copy and ammend this to make things a little easyer.
Jim

Mass component substitution in Task List

Hi Gurus,
I'have so many Task Lists, and total have hundreds of line operations.
But, now there material substitution. Let say, previously in Taks List using Material/Component "A", and now material "A" substituted become material/compenent "B".
How could we do change (mass change) to all Component in Task List that previously using "A" and than replaced by "B" and how about if there are unit of measure differences .
How do we do it ? Any T-Code to do this ?
Regards,
Tri W

Tri W,
The material will be replaced, with the follow up material, once there isnt sufficient quantity available to satisfy the demand from the reference date entered on the MRP screen.
However, it looks like this replacement of the follow up material only works if you manually enter the orginal material in the components tab or if you import the material from a BOM.This doesnt seem to work if the material is directly associated to the Task list(Even though this is also assigned a BOM number of Type "standard") . When you import the task list into the order, the Original material is not replaced with the Follow up material if there isnt sufficient stock available.This looks like a bug to me, you may want to consider raising a OSS note to see where that leads you, otherwise my apologize for misleading you. We had used the BOM and this worked perfectly for us,hence i was pretty sure this would work for materials assigend directly to task list(Since this also had a BOM number and type assigned to it).
Best Regards
Narasimhan

PM:Task list Component addition

Hello Guys,
We are facing below issue.
1. In task list component screen, if we add a component via Direct entry, system create Standard BOM.
2. If we add the component via component selection from BOM, it creates the material BOM.
The second method is preferable as changes in BOM is reflected in task list as the link is maintained. This is not an issue if we are creating task list manually as we can select the component manually. But however, if we create task list via LSMW or load program, the issue arises.
When contacted SAP on OSS, SAP advised to use BADI IMRM_COMP_PROCESSING, method SET_COMP_PROCESSING with
E_CORRECTION_ACTIVE = ' '. This seems to resolve the issue. But I am not sure of the side effects.
Has any one implemented this BADI earlier and can share the experience?
Thanks
Ashish Barsagade

hi,
U can assign material BOM in Tasklist header... there is a Assembly field... just enter the name of Material BOM. and Material BOM would be attatched to task list.
it will solve ur problem
Regards,
Amit kushwaha
Edited by: amit kushwaha on Feb 25, 2008 10:45 AM

Add JavaScript file to ALL existing Task List pages and to newly created list pages

We have several OOTB task lists that are in use on several subsites. We want to add JavaScript to the NewForm.aspx and EditForm.aspx for these task lists. These lists have not been customized, they are based on the standard Task Content Type.
Since there are several lists already created and in use, it would be far too much work to manually add a Content Editor web part to each page.
We put the JavaScript file in the top-level site style library.
Is there a way to programmatically attach a script reference to each existing page in all the subsites AND have the script reference placed on any NEW list pages created from the OOTB Task content type? Or, add a CEWP to all existing list pages using a feature?
I could not find any examples of this.

Hi,
A solution would be like this: Add your script into a Content Editor Web Part in a page, then add this Content Editor Web Part into the NewForm page of these Task lists using
SharePoint Object Model.
More information:
Use
SPList.Forms property to retrieve the URLs of the specific form of these Task lists:
http://sharepointcore.blogspot.com/2011/08/sharepoint-listitem-new-edit-and.html
With
SPLimitedWebPartManager object, we can retrieve the web parts of a page, choose one and add into another
page:
SPLimitedWebPartManager.WebParts
property
SPLimitedWebPartManager.AddWebPart
Another two links about this for your reference:
http://www.stefangordon.com/add-web-part-to-page-programmatically/
http://sharepoint.stackexchange.com/questions/9442/how-to-programmatically-add-a-webpart-to-a-page
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they
help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]
Patrick Liang
TechNet Community Support

General task list with component : creating standard BOM

Hello,
When adding a component to a general task list , i get a "create standard BOM" screen , see below for example :
Standard object PA00000212
Plant
BOM Usage       4
Change Number
Valid From           07.09.2009
Can someone explain to me the relation between standard BOM and component within a general task list ?
Thanks,
P.

Hi,
Pls find some of the points below for your referece
Standard BOM:
Can used for assigning the material from the BOM to Task list operation
That is, BOM components for the object (Equipment, Functional Location , Assembly) can be retrived and assigned to maintenance Task list of the operation
Condition: BOM corresponds exactly to the content of the structure list
Free Material Assignment:
Assigning Stock Material (Material number) those are not listed in the BOM of maintenance object directly to the maintenance task list
Condition: Setting to be done as BOM usage for Plant Maintenance (4)
Path: Maintenance plans, work centers, Tasl Lists and PRTs>>>>>Tasl Lists>>>>>Control Data>>>>Define Presetting for Free Assignment of Material-----BOM Usage as 4
Pls note that, while making free assignment, system creates an internal BOM and this can not be processed from application.
Hope this may useful
Thanks
Siva

DB table holding the component materials in task list

Hi all,
I'd like to find out the relationship of the component materials inside a task list (IA07).
I've found DB table PLKO and PLPO holding the data for task and operations respectively. Inside an operation, there are components. I just can't find the DB table holding the components by F1 and where-used list ...
Any advice?
Thanks a lot.
Message was edited by:
Macy Lo

PLMZ-PLNTY = PLKO-PLNTY
PLMZ-PLNNR = PLKO-PLNNR
PLMZ-PLNAL = PLKO-PLNAL
PLMZ-ZAEHL = PLKO-ZAEHL
PLMZ-PLNTY = PLPO-PLNTY
PLMZ-PLNNR = PLPO-PLNNR
PLMZ-ZUONR = PLPO-PLNKN
PLMZ-ZAEHL = PLPO-ZAEHL
if helpful, reward
Sathish. R

Can We Add a Target System Once Task List is Open and Active?

Has anyone been able to add a system to an existing project (i.e., task list)? We have a pre-existing project that we created when we recently upgraded to ECC 5.0. At the time of the upgrade, we didn't upgrade one system (MNT) in the event we had to look back at how the old version operated or looked. We've since upgraded the MNT system and want to add it as a target system for the pre-existing project.
Is anyone aware of a method to add this system as a target without creating a new project?

Hello Bob,
I've find your question. It's been a while since you've asked it, but did you already found a solution to adding a system to an existing maintenance project?
I've got that problem now.
And I would appreciate it if you could forward me the solution.
(you can also mail it to [email protected])
kind regards,
David De Boel

General task list: component selection from BOM - possible in batch input?

Hi experts,
for the assignment of non-stock material to general task lists I have followed the advice from message[6115684|Re: General Task List Components;.
So what I have done is:
- Include non-stock material in BOM
- Assign BOM to general task list header
When clicking on the "Component selection" button in the task list components, I can select a component.
When entering the material number of the component directly though, I get an error: "Material type X and line item type L not compatible" (CO135).
I would like to upload the general task lists with a batch input recording, but I can't figure out how to select components.
Any thoughts?
Kind regards,
Andreas

Hello,
We have the same requirement to load tasklists (change & create). We are using the function modules EAM_TASKLIST_CREATE and EAM_TASKLIST_CHANGE. However, i cannot get a non-stock BOM item to process. Has anyone got this working?
Thanks,
Clay.
EDIT: Found the answer - simply fill in the fields for BOM on the component (STLTY, STLNR, STLKN, and STLAL).
Message was edited by: Clayton Mergen

Component allocation to Euipment Task list

Hello frinds,
I have a query related to Plant Maintenence.
We have a euipment task list with different counters . In each counter we have operations and components assigned to those operations.
When order is created some of the operations are not getting copied and hence few components as well.
Please tell me tables where i can find the allocation of compoenents to operations.
Thanks
Rohit

Thanks Mahee,
The table i was looking for is PLMZ (allocation of components to operations)
I found that deletion indicator is set for certain operations in PLMZ and those components are not picked which are assigned to operations with deleltion indicator (LOKEZ-PLMZ).
Can any one tell me how this deletion indicator is set for component allocation to operations and how do i remove this ?
Thanks for help.
Rohit

Routing-LSMW-Component Allocation to task list

Hi Gurus,
I'm creating LSMW to Routing using Standard-Batch Input method, have mapped the required structures.
But I was unable to map the Component allocation to task list.
Is it possible in the standard one else I need to go for some sort customisation.
Can anybody throw some lite on this issue ?
regards
Ram Kumar

Hi,
You will find BIPMZ Batch input structure for component allocation to task list in the standard structure relations (no customizing required). Use the same for your need.
Hope it clarifies your query.
Regards,
Vivek

BAPI_ALM_ORDER_MAINTAIN - add task list

Hi Experts,
I wanted to execute the bapi BAPI_ALM_ORDER_MAINTAIN, to add a task list to PM order.
Any idea is... a good idea.
Francesco

Hi,
Populate methods table first.
1) Populate header
      t_methods_tab-refnumber = '000001'.
      t_methods_tab-objecttype = 'HEADER'.
      t_methods_tab-method = 'CHANGE'.
      t_methods_tab-objectkey = "Order number".
      APPEND t_methods_tab.
      CLEAR t_methods_tab.
2)
      t_methods_tab-objecttype = ' '.
      t_methods_tab-method = 'SAVE'.
      APPEND t_methods_tab.
      CLEAR t_methods_tab.
3) If operation already present in PM order,
t_methods_tab-refnumber = "opeartion number".
t_methods_tab-objecttype = 'OPERATION'.
t_methods_tab-method = 'CHANGE'.
t_methods_tab-objectkey = "Order number".
APPEND t_methods_tab.
CLEAR t_methods_tab.
4) If operation not present in PM order,
t_methods_tab-refnumber = "opeartion number".
t_methods_tab-objecttype = 'OPERATION'.
t_methods_tab-method = 'CREATE'.
t_methods_tab-objectkey = "Order number".
APPEND t_methods_tab.
CLEAR t_methods_tab.
5) Populate header and operation table as per input.
6) Call BAPI
      CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
        TABLES
          it_methods      = t_methods_tab
          it_header        = t_header_tab
          it_header_up   = t_header_up_tab
          it_operation    = t_operation_tab
          it_operation_up = t_operation_up_tab
          return          = t_return.
      READ TABLE t_return WITH KEY type = 'E'.
      IF sy-subrc <> 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      ELSE.
         CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      ENDIF.
Hope u will find it useful....
Regards,
Aparna Gaikwad

Add search filter to ipm task list

I am using Oracle 10G. Is there a way to add a search filter to refine the rows displayed within the IPM task list web tool?

Hi
I was able to solve the problem by adding entries in sap\modification\generic-serachbackend-config.xml.
Regards
Satish

How to add one task in manager task list in CRM

Hello,
I have one scenario like when the user status is changed in service request then manager should get one email notification and that one task should be added in the manager task list.
To send the email I have configure the Action profile and its working fine, but thing is that I not able to create the task so that manager can see this in his/her 'My Open Task' area. For this do I need to configure any workflow or some thing else.
Any idea will be help full.
Thanks
Subhankar

Solved by my self

Task list component...

Client wants to see task lists that have components on them and what the components are. Could any on please help me to get the Task list. Any pointer from any side will help me a lot. Thanks in Advance.
Thanks
Azizur

Hi,
Pls check Tcode IA17 (Task List Printing List) with Output volume parameter selection as Material, Long Text Material etc.,
Regards
Siva

Add component in task list

Similar Messages

Maybe you are looking for