Add Corner Point to Path

Is there a way to add a Corner Anchor Point to an exisiting path. The Add Anchor Point tool always creates a smooth point, which I then have to go back and convert to a corner point. Seems to me, in earlier versions, I was able to use the Pen tool, then hold ALT and click twice to achieve this. CS6 doesn't respond to that procedure.
Is there some other trick?
Thanks,
Bob

Alt-click once with Pen Tool after using Pen Tool to add a new anchor works for me - I was doing it earlier today with CS6. Are you sure the path has been selected, for example by Cmd-clicking it first with the Pen Tool before you try to add the anchor?

Similar Messages

Tools related to anchor points are not working, can't add a point to paths or convert a point.

Having a lot of issues manipulating points on paths in Illustrator CC - this is a fundamental feature of creating vector graphics and it's very annoying I'm paying for this and it's just not working. Eating up a lot of my time simply because I can't select or convert or add the anchor.

bella,
Presuming we are not just talking about more or less hidden Anchor Points as in View>Show/Hide Edges/Bounding Box, you may try to start on the following list (5) seems unlikely in this case).
You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

How do I extend (i.e. add more points to the end of) a Bezier path?

What's the easiest way of making a Bezier path longer by adding more points to the end? I can do it by moving the end point to where I want the new end to be using the Direct Select tool, then using the Add Point tool to replace the old end point and then add the new points I want between the old end point and the new end point. But it's very tedious and there must surely be a better way. I just want to continue adding points like I did when I was creating the path in the first place.
I'm using CS2, so I need some technique that works with this version.
Thanks - Rowan

Rowan,
You can just use the Pen Tool again and Click, or ClickDrag from, the end Anchor Point.
The result will depend on the combination of the ways the point was made when ending and starting again:
Click/Click > normal corner point,
Click/ClickDrag > corner point with Handle on new segment,
ClickDrag/Click > corner point with Handle on old segment,
ClickDrag/ClickDrag > smooth point with (probably different length but parallel) Handles on both segments.
You may try out the combinations quickly and see it happen, just hitting the P key to start anew.

I am getting this message: "Please use the add anchor point tool on a segment of a path" -- need help!

Hello guys,
I am new to illustrator and am trying to trace one of my scanned sketches on Illustrator CC. I have been watching tutorials on Youtube.com and have followed every step, but when it comes to using the pen tool, I receive a pop up message reading, "Please use the add anchor point tool on a segment of a path." I researched Adobe forums and came across another discussion with someone who had the same problem. After making the changes that people suggested to the other person's discussion, the problem still occurred with me. I am still getting the same message even after making sure I have deselected Snap to grid, etc. Can anyone please help me out!?

It sounds to me like you're using the Add Anchor Point tool instead of the Pen tool. If you are trying to trace a scanned sketch, you'll be creating content from scratch in which case you want to use the Pen tool. The Add Anchor Point tool can only modify an existing path, it can't create one. Switch to your Pen tool and see if that helps.

Photoshop CS4: Using pen tool to add corner anchors instead of curve anchors

Hello folks, I have searched all the resources I could think of using different phrasings, but have yet to figure out how to do this or if it can be done. I am working on a project that requires adding many corner anchors to paths. By default, using the pen tool in Photoshop CS4 adds curve anchors. Thus requiring me to add the anchor and then convert it to a corner. Is there some easy way to make PS create corners instead of curves with the pen tool? Even using the shift-cntl-alt-click combos didn't help? Would save me time and sanity!
Thanks all,
- DK

I think if you just click and don't move the mouse before you let off the mouse button you get corner anchors, no? But that's when you're creating the path. I guess you want to add corner anchors with the Add Anchor Point Tool?
-Noel

Flash Auto-Adds Anchor Points

Hey, Forum;
I'm trying to set up a basic shape tween of a sheet of paper
moving through the air. I start with a rectangular shape that has a
single curve point on each corner (curved so I can show the arcing
& bending of the sheet). After setting a new keyframe and
moving the sheet to the next position, I find that Flash has added
several acnchor points between the corners of the sheet, requiring
me to go in and delete them. What I'm asking is how to disable this
'Auto Add Anchor Points' feature.
Thanks for any and all help.
Cayce

wozza,
Are you sure you are selecting the path, not the guid?
It may be time to look at the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Illustrator cc 2014 adds anchor points to guides

What is happening with illustrator CC 2014!!! I have placed a guide to know where to add a anchor point cliked on the add anchor point tool but when i select the object i want to add the anchor point to it adds an anchor point to the guide!!!! so i locked the guide thinking that this would solve the problem it then gives me a warning sign saying please use on a segment of the path it still thinks the guide is a path!!!

wozza,
Are you sure you are selecting the path, not the guid?
It may be time to look at the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Pen Tool, add new point keeps previous point selected?

This has bugged me immensely ever since the new versions of inDesign adopted this habit, is there a work-around?
Say I want to make a customly shaped frame around a photo that's imported in the standard rectangle shape and I don't want it to be a circle, rounded rectangle, or polygon that I can simply "convert shape" to. I could try editing the path with the pencil tool but typically that will create 100+ anchor points of vector disaster.
What I used to do in CS2, CS3, CS4 is grab the handy pen tool, add a point and move it where I want with the direct selection tool by simply holding CMD (ctrl).
But now, (not sure if it started in CS5, CS5.5, or CS6) when I add a new point it keeps the previous points selected. Rubbish, now I can't move the new point where I want it without moving the previous however many I created. And there's no simple 1-click method of only selecting the point I just made (that I know of). Re-clicking with the direct selection tool does nothing and clicking other selected points does not deselect them.
So in order to move the point I just made, by itself, I have to deselect all points then reselect the point I want to move, which is really tricky if it's under other objects.
Does anyone know how to have ONLY the new point selected when I add a point? Or even have no points selected so I can easily CMD+click the ones I want to move?

It looks like what is needed is some way to deselect all the points on a selected object, while keeping the object itself selected.
Using the built-in InDesign tools, the way to do that would seem to be: switch to the direct selection white arrow tool (by pressing CMD) as you have been doing. Click anywhere on the path of the object. This clears all selected points while keeping the object selected. Now release CMD to get back to the Pen tool, and add your point.
If this is too fiddly (it can be tricky to click on the path itself, although the white arrow changes subtely to show you that you're over the path), you can alternatively use the following one line script:
try {app.selection[0].select()}catch(_){};
This does the same thing: It deselects all selected points on the current page item.
To use, copy this line to a text editor. Save with the extension .jsx and place in your InDesign scripts folder. You can then assign a keyboard shortcut to the script, so that it should be very easy to deselect all the points.

How do I switch to "Add Anchor Point Tool" and "Convert Point Tool" with shortcuts? (CS6)(Windows 7)

I would like to know if there’re shortcuts to switch to" Add Anchor Point Tool" and "Convert Point Tool" on Photoshop CS6 while using a Windows 7 PC.
Thank you for your time!!

What I usually do is use the pen tool. Clicking anywhere on the path adds points, clicking on a point removes it and holding down the alt key while over a point is the convert point tool. Ctrl key is the direct selection tool and ctrl+alt key while dragging the object duplicates it.

Add Anchor Points by Distance?

I often need to add anchor points to a shape when I bring it into Cinema 4D to extrude and warp.
The Object>Path>Add Anchor Points just adds an additional anchor between existing anchor points, effectively doubling the density every time its run.
This isn't great for shapes with very long segments and very short segments. The short segments don't need subdividing, but the long segments need more subdivisions.
Is there a script or plug-in that can add anchor points based on distance? Such as: Add an extra anchor point to a path every 10 mm?

Navarro,
You may do it in this roundabout way:
1) Select the object and Select>Object>Direction Handles;
2) Ctrl/Cmd+X to Cut;
3) Press Delete;
4) Ctrl/Cmd+F to Paste in Front;
Now you have changed the path segments into separate paths;
5) For each (path segment) path apply Object>Path>Add Anchor Points as needed or maybe (depending on version) use the more versatile free Divide script, see below;
6) Select the paths and Ctrl/Cmd+J to join them (use Direct Selection in older versions).
With the rectangle shown, it would be changed into two long horizontal paths and two short vertical ones; you can select each pair and add Anchor Points, or maybe just leave the vertical ones as they are.
You may download the Divide script here:
http://park12.wakwak.com/~shp/lc/et/en_aics_script.html

How to obtain corner points of rotated rectangle?

Am drawing a rectangle, then using an Affine Transform to rotate the angle. After rotating and drawing the rectangle, I need to obtain the 4 corner points of the rectangle. This is (psuedocode) for what I've tried:
Rectangle r = new Rectangle (x, y, width, height);
AffineTransform at = new AffineTransform();
at.rotate (angleInDegrees*Math.PI/180);
Shape s = at.createTransformedShape (r);
PathIterator pi = s.getPathIterator(at);
while (pi.isDone() == false)
fetchCornerPoint (pi);
pi.next();
g2.draw(s);
The shape is being correctly drawn on the screen, so I know the transofmr is working. But the path appears to contain the 4 corner points of the rectangle prior to rotation, not the 4 corner points after the rotation.
It's got to be a "doh moment", but I can't see it.

I notice you call getPathIterator on 's', which is already transformed. I have not verified this, but maybe you should call getPathIterator(at) on the original shape ('r')?

How do you add cue points to a MOV file that Director 12 can read?

I have just downloaded the Trial of Director 12 - and unless I can add cue points to video that it can interpret - I am not going to be able to achieve what I need to. I've spent the last day and a half looking over the scant documentation provided by Adobe, and anything else I could find online - but the only answers that came anywhere near were for old versions using discontinued xtras.
Please can anyone help? - I am using Windows 7 64 bit - CS6.
Thanks in advance. :-)

Probably too late for your project but...
You can do this by using 3 sprites in addition to the SWF. In this example, I've named them "videoPlay", "videoRewind, and "videoStop". The SWF in this case was named "video."
Apply this script to each of the 3 sprites.
property mySprite
on beginSprite me
mySprite = sprite(me.spriteNum)
end
on mouseUp me
case mySprite.name of
    "videoPlay":
      sprite("video").play()
    "videoStop":
      sprite("video").stop()
    "videoRewind":
      sprite("video").stop()
      sprite("video").rewind()
end case
end

How do i add bullet points to a pdf

How do i add bullet points to a pdf?

Hi
I am not using it for a presentation. I am creating an email flyer and just want to highlight a few key points by adding bullet points such as:
xxx
xxx
I eventually changed the font to wingdings which was very time consuming.

How do I edit the bevel presets in Illustrator CC / Add a custom bevel path. No bevels.ai in Application folder

This help link: Add a custom bevel path
is not relevant to Illustrator CC as there is no folder: Adobe Illustrator CS5\Required\Resources\en_US folder ((Mac OS)
I have searched my Mac for a Bevels.ai file, but none found…

In CS6 found this here. ON mac right click on the application and chose >> show package contents
Adobe Illustrator.app/Required/Resources/en_US/Bevels.ai
I believe the help link you found needs the file location to be updated as had to do the same for CS5.

[svn:osmf:] 16068: Update @includeExample to add symbolic "examples" relative path (that is expanded by the build process).

Revision: 16068
Revision: 16068
Author:   [email protected]
Date:     2010-05-12 11:17:11 -0700 (Wed, 12 May 2010)
Log Message:
Update @includeExample to add symbolic "examples" relative path (that is expanded by the build process).
Also added -noswf option as we are not compiling the example into a swf for the asdocs.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/media/MediaPlayerSprite.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Add Corner Point to Path

Similar Messages

Maybe you are looking for