Add Cost Center Group

Hi Gurus,
I'm trying to restructure the cost center hierarchy, OKEON, I'm trying to add the cost center group M000400(already created) under M000600 is there already in the cost center hierarchy.
But the system is not allowing me add an existing group. How can I do it?
Will assign good points.
Thanks
Prashanth

Hi Sridhar,
Sorry it is M000600 i wrongly mentioned M000300 as my earlier reply.
No M000400 is not in the Standard Hierarchy, but it is a cost center group which got M000600 under M000400.
And M000300 is a part of standard hierarchy and we want M000400 to be under M0000600.
Please advice.
Thanks
Prashanth

Similar Messages

How batch append cost center group to standard hierarchy by batch

Hi Guys,
Would you please tell how me how append cost center groups to standard hierarchy by batch, every time I have to do it one by one, is there a convenient way? thanks.
Best Regards
FS

Hi,
You can create any number of cost center groups as per your requirement.
But one thing is crucial. If you crin your eate the groups using the T Code:OKEON. those will effect to the standard hierarchy.
Cost centers created wil KSH1 will not effect to standard Hierarchy.
Main point here is the main hierarchy should be maintained in OKEON. Later you can add any number of groups to that. LSMW will work, before that Hirarchy Area(Cost center group) should be maintained in the system for effective work of LSMW.
Regards,
Pavan Kumar Arvapally

Add Cost Center

How can i add a cost center in Zenworks?
I dont want to use the collection data form.
I want to add cost center to a dynamic workstation group. Seems impossible.
If i add it to a group in Edirectory. Will Zenworks read that attribute?

frigge,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Sort Cost Center Groups

How can I sort Cost Center Groups, in ascending order? It is easy to put in order the Cost Centers but I need to put in order the cost Center Group at all levels.
<b>Xavilee</b>

That's fair enough
Are you running the report on all cost centres or all cost centre groups?
When we run reports, they are automatically sorted in cost centres - alphabetically!
If you want to run the report on cost centre groups, you may need to create a variant that lists all cost centre groups, then add an explode to show the detail.

Need a drop down list for cost center group

Hello,
I need to add the cost center group selection option to my program. I have added it to the selection options of my program and I would like to have a drop down list on this field. I have looked at the t-code KS13 and I am thinking that this is what I need. I am not sure if this is a search help or something else. if this is a search help, is it possible to use the same search help in my program? can some please let me know how I would do this in my program?   possibly a code example?
thanks in advance for the help.

PARAMETER:     p_sostat(15) TYPE c AS LISTBOX VISIBLE LENGTH 16,
name = 'p_sostat'.
CLEAR sostatlist[].
value-text = text-101. "'Open'(101).
value-key = '1'.
APPEND value TO sostatlist.
value-text = text-102. "'On Hold'(102).
value-key = '2'.
APPEND value TO sostatlist.
value-text = text-103. "'Drop/Pull'(103).
value-key = '3'.
APPEND value TO sostatlist.
value-text = text-104. "'Pending'(104).
value-key = '4'.
APPEND value TO sostatlist.
value-text = text-105. "'Floor'(105).
value-key = '5'.
APPEND value TO sostatlist.
value-text = text-106. "'Kitted'(106).
value-key = '6'.
APPEND value TO sostatlist.
value-text = text-107. "'Packed'(107).
value-key = '7'.
APPEND value TO sostatlist.
value-text = text-108. "'PGI'(108).
value-key = '8'.
APPEND value TO sostatlist.
value-text = text-109. "'EDI Error'(109).
value-key = '9'.
APPEND value TO sostatlist.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = name
      values = sostatlist.

MDG-F - Replication model for Cost Center Group

Hello
We are trying to create IDOC replication model for Cost center group IDOC_COSTG for data model 0G (MDG 7.0).
When trying to assign "Outbound Parameter" = SEND_DELTA_INFO against outbound implementation 1112, we are getting error message saying : "Entry 1112 SEND_DELTA_INFO does not exist in DRFC_PARO (check table)".
While checking table DRFC_PARO via SE16, it shows all the entries for 1012 (GL mast), 1102 (cost center) but it is missing entry for 1112 (cost center group).
What are we missing? How to generate entry in this check table DRFC_PARO? which step is creating this entry?
Thanks
Luo

Hello Luo
You have to maintain this entry in following table -
Go to SM30. Give table name - DRFV_PARO and click on maintain. You will get a pop-up for outbound implementation. Give 1112 and proceed. Add the send_delta_info in the table, save it and then add it in DRF. Do add package_data so that you can send multiple cost centers in your target system.
Kiran

How to find the cost center group from cycle/ segment in CO module?

Hi All,
I need to fetch the list of cost centers in the cost center group against the cycle.
Is there any table which will store the list of cost centers against the cycle?
or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
Regards,
Mrunal

FM: RK_AL_CYCLE_READ
CHECK TABLE: T811K

Get Name for CO Cost Center Group and BGD Processing

Hi,
I use these function modules to get the cost center group nodes in the CO hierarchy.
If I pass it a value that is in two controlling areas
if prompts another screen to pick which controlling area we want to look in. My problem is when I try to run this report in the background it gets hung up on this screen waiting for input. any ideas on how to get around this.
here is the reference code.
thanks
Please note that the following logic is parts of SAP example report
RGSEX001.
Get the internal Set-ID from the external name of the set
Selection of sets can be restricted to a specific set class or
to sets matching a specific table field.
See documentation of function module G_SET_GET_ID_FROM_NAME
If the set class, subclass and setname is known, function module
G_SET_ENCRYPT_SETID should be used alternatively (see RGSEX020)
    CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
         EXPORTING
              shortname = w_set
              old_setid = w_setid
         IMPORTING
              new_setid = w_setid.
Read the complete hierarchy (set and all subsets)
    CALL FUNCTION 'G_SET_TREE_IMPORT'
         EXPORTING
              setid              = w_setid "Set-ID, not the Setname!!!
              no_table_buffering = ' '
         TABLES
              set_hierarchy      = it_hierarchy
              set_values         = it_values.

Hi!
For reading cost center hierarchy you can try K_HIERARCHY_TABLES_READ.
It returns near the same info as one you've mentioned, works well for single controlling area and I hope in case of ambiguity it will raise one of exceptions provided. Give it try.
Regards,
Maxim.

Report Painter: P&L on Cost Center Group,BA(WBS/Internal Order) wise

Dear Experts, i require to create a report in report painter.
The requirement is to display P&L account on cost center group wise; if cost center is not mentioned and WBS/internal order is mentioned it should be shown under the respective Business Area and if non of the above is mentioned it should be shown in a separate column (General). The total of each GL should match the trial balance amount.
Please Guide Me.

Hi,
Its little bit complex to accommodate in report painter to in 1page.
Coz. Cost Center information will get in different library in GRR1
1AB Cost Centers: Variance Analysis FICTM 07.02.2013 CCSS
6O2 Internal Orders SAP 24.03.2000 RWCOOM
better you can develop with ABAP report.
Regd,
Khan.

How to receive the cost center group from legacy system

Hi Experts,
i need to collect cost center group hierarchy from Legacy system.is there any standerd tcode available to get it.
Usefull answers will be rewarded.
looking forward to hear from all.
regards,
Tom

Hi,
Cost Center group can be viewed from field SETCLASS of table SETLEAF.
To Fetch the relevant cost center from a cost center group, we can use FM: 'K_HIERARCHY_TABLE_READ'.
Below thread may give you more details.
Cost Center Group
Regards,
Ranjith.

How to use LSMW using the IDOC to upload and maintain cost center group

Hi Everyone,
Is there anyone who knows how to use LSMW using the IDOC functions instead of the recording. I wanted to upload the alternative cost center group I created in the system.
reply would be greatly appreciated
Warm Regards

Hi Praveen,
There is a risk trying to migrate data directly into standard tables because this can generate database inconsistences or wrong inserted data according to what is customized in the target system. I do not recommend migrate like this.
With LSMW you use objects like direct input programs, idocs, bapis and recorded batch input. Try to create a project and use an standard object for your data. Also, check in SXDA transaction (Goto-->DX programs) if there is a standard program for your data.
Anyway, if you want to upload data directly to tables, read below thread:
["UPLOAD CSV FILE";
[how to upload .csv file into a custom table;
Regards,
Roger

Why authorization for cost center groups does not worked ?

hello all,
I would like to give authorization for a CO report (S_ALR_87013625) based on authorization values : cost center groups.
But, unfortunately, it doesn't work. I get a message : No authorization for x of x read records.
Is it only possible to give authorization on standard hierarchy and cost center ?
Please, help me
Thanks and best regards

hi,
Run the su53 transaction.See what authorization was missing

UPLOADING COST CENTER GROUPS

Hi All.,
In my project, where my client have lots of cost center groups. To assign them to the standard hierarchy it is taking too much time through Manual Uploading/assignment
So, is there any other option for it. (Automatic Procedure)
Please, guide me.
Thanks to All.
Raja

Hi,
I don't think it is possible to attach Cost Center groups to Standard Hierarchy using BDC Program. When we attach the Cost Center Groups we have to select it individually. Probably, you can try by developing a BDC program.
Thanks
Murali.

Report restricted to specific Cost Centers of a cost center group

Dear Experts,
can you tell me how to achieve the following goal:
We want to have a report writer report restricted to one cost center group that can be chosen by the user, but only showing in the first column the cost centers starting with "1049" for example that are part of this group and in the second column the cost centers starting with "1039" that are part of the group and so on.
As far as I know, if we insert a variable on cost center group, we cannot restrict the cost centers any further ... do you have an idea how to proceed?
Thank you very much!!
Thomas

Try it with two sub groups in your main cost cente group, one for the first column, and on for the second column.

Change in the cost center group

Hi,
Can we change the cost center from one cost center group to another group, when there are some postings in the cost center? If yes, how to go about it?
help me out

Yes you can!
If you are planning to change within the standard hierarchy, Goto OKEON, drag, drop and save.
Or you can go to KS02 for the cost center, in the basic data, you can give the new cost center group under the hierarchy area.
If it is just non hierarchy cost center group, then go to KSH2 enter the old group, select the cost center, delete save, then go to the new cost center group and include the cost center.
It does not matter whether it has been posted or not. It is just a grouping. But caution must be exercised. and there shall be a valid justification for doing so. Because the cost center may be used in various cycles. So better to check where and all the cost center is being used and then do the change.

Add Cost Center Group

Similar Messages

Maybe you are looking for