Add currency to 0UNIT

Hello all,
I need to add a new currency 'DI' to the master table of 0UNIT. Usually, I can go to RSD1 and select maintain and create new entries but for this order unit I don't have this option. How to I add currencies to this object?

Hi Nyrvole,
You cannot directly or manually add a currency in BW. If it is maintained in your source system then you need to pull it through RSA1 > Source systems > transfer global setting > Currencies > Update tables.
Hope this helps...

Similar Messages

How to add currency sign?

Hi,
I have a group currency key figure in my report. I want to add $ sign in front of the amount for ex. 12550 it should show as $12550.
How to add currency sign $ in front of the aount.
Pts for ans.
Regards,
Shri.

Hi,
You can enable currency in the reporting output using following steps:
Query properties> Display> select Display scaling factors for key figures.
but using this option currency($) will be displayed after the amount. it means key figure values will be displayed like 300$, 800$.
hope it helps..
regards,
raju

How do I add currency to duration in Numbers '09

Hi there!
I'm in way over my head when it comes to using formulas (other than the quick calculations) and I could do with some of your expertise if possible?
I'm a freelance graphic designer and I'm trying to produce a quoting system to calculate costs for print only, design only and both of these combined.
See example table here: http://www.losavellanos.co.uk/picture1.jpg
1) The numbers from D4 to H4 are fictional quotes supplied by printers - how do I add a percentage to these (in this example 20%) and then have the total of both below, in row 6? Is it possible to show the 20% increase as currency (as my example in D5)? e.g. on the table, D4 is £475.00, D5 should be £95.00 and D6 should be £570.00? - I could then SUM both D4 and D5 to get the total in D6.
2) The numbers in D8 to H8 are example hours for design time and I'd like to add values to these cells so that the totals appear as currency below in rows 9 and 10. The 2 values would be based on a standard hourly rate e.g. £40 per hour and reduced rate e.g. £25 per hour. (I have added these already to show you what it would say if it worked - ideally I would like this to be calculated for me when I change the numbers in row 8)?
Any help will be really appreciated (my head hurts)...

It's really simple and it would be useful to download and read *Numbers User Guide* and *iWork Formulas and Functions User Guide* available from the Help Menu !
CAUTION: as I am running French system you must edit the formula for cell W4 !
On an English system, it must be:
=AVERAGE(U4,V4)
Yvan KOENIG (VALLAURIS, France) dimanche 4 octobre 2009 18:34:52

How to add Currency Unit in InfoCube definition?

Hello Gurus,
How do I add a newly created Currency Unit (ex: ZCURR) to the Unit Dimension of my InfoCube?
I created this Unit in NotAssignedNodes InfoArea, but when I open this InfoArea to drag & drop the Unit, I see a blank InfoArea.
Pls help.
POINTS WILL DEF BE AWARDED!!
Thanks,
SD

Hi Sebastian,
I dont think we can expect a unit to be stored in UNIT fixed dimension unless it comes along with a keyfigure.
UNIT dimension is to store the unit characteristic, which is present in the cube, becasue we have used a keyfigure which has unit along with it, like Amount or quantity data type key figures.
When we define a key figure with data type as Quantity, it will ask us to mention either Unit object or a fixed unit. Here we need to mention the unit created by you.
If we have added any unit characteristic in the char tab of cube defintion, then we have ensure to place them in a custom dimension.
Hope this is clear.
Naveen.A

Cannot add Currency Unit in CUbe

Hello,
I am trying to add a currency unit (ZCURR1) which I created to my Unit Dimension in my InfoCube. This unit is created under the 0UNINOTASSIGNED InfoArea. The problem is I dont see any of the units (currency units etc) under the 0UNINOTASSIGNED InfoArea when I wish to drag & drop the same. Do I need to make any changes?
Interestingly, I see 0CURRENCY already existing in my UNIT dimension of the InfoCube. But when I go to the Transformation Screen, I do not see it. Why is it so?
POINTS WILL BE AWARDED!!
Regards,
SD

Hai Sebastian,
If you have created ZCURR1 as an attribute you cannot drag and drop in to the unit dimension.If its been created as navigational attribute you can see under the navigational attribute folder,once the master key charcterstic is dragged in to the dimension.while executing a query you can see ZCURR1 in the attributes folder,irrespective of display or navigational attribute.
You can see the 0currency in the unit because you must have got a key figure which is a type CURRENCY and which is not fixed currency.

Crystal Report can't add Currency field when connect to SAP Infosets.

Hi,
I created a simple Crystal Report which connect SAP Infosets.
Everything is fine except I add a "Currency" field into report. Three errors returned.
Fail to retrieve data from database -> Database connector error :'Syntax error in program SAPLHRPADINA1' -> Database connector Error: 'RFC_CLOSED'
Do you have any idea?

Hi,
can you run a InfoSet query based on the InfoSet ?
Can you create a QuickView on top of the InfoSet ?
ingo

How to add currency converter icon to toolbar

Does firefox 5 have an icon for currency converter? How do I add a currency converter to a toolbar?

Hi,
You can enable currency in the reporting output using following steps:
Query properties> Display> select Display scaling factors for key figures.
but using this option currency($) will be displayed after the amount. it means key figure values will be displayed like 300$, 800$.
hope it helps..
regards,
raju

How to add Currency field with dropdown on screen layout (module pool)

I need to add a field called Currency( field label ) with dropdown (like SKB1-WAERS). 
The field label and input output field should default as being hidden and
sould be visible only when other field value ( on the same screen ) should match with the value in the database table .
Could you please suggest me how to create dropdown
and give this functionality with coding ?
Thanks in advance.

Hi,
In the field attributes of the SKB1-WAERS..in the group attributes..give a group name G1..Add the same G1 for the field lable also.
Then in the PBO of the screen..
***Check the conditions..when other field value (on the same screen) matches
***with the value in the database table.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'G1'.
 SCREEN-INPUT = '0'.
 SCREEN-INVISIBLE = '1'.
 MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks,
Naren

Add currency to the company code

Hi Gurus,
We have created a company code for libya using local currency as USD but not defined group currency ( Canadian Dollar) and hard currency (Libya Dollar) while creating the company code.
Documents were posted and POs for logistics were created using USD. Now the local authorities needs to have reports in Libian currency, when we try to add group and hard curriences systems gives us a message
"The currency type for an additional local currency cannot be changed for company code, since documents were already posted in this company code".
So the other option is to create a new company code and transfer all documents and PO from old company code.
My question is if we create a new company code how can we tackle exchange rates during that period
Is there any other option instead of creating a new company code.
Thanks for your support and will assign good points.
Thanks

Hello,
Please assess the possibility to create a new Special Ledger instead of creating another company code and migrating the required data.
In the Spl. Ledger Settings specify the Group Currency and Hard Currency as required for the original libyan company code. Carryout the rest of settings such as Installation of tables, Field movements etc.,
Importantly, at the Activity level, specify that the ledger can be posted directly and even at subsequent posting (option '3') so that there is a possibility to transfer the Documents from FI to SPL at a later point of time as well. (This way the historic data can be moved to SPL)
Once the ledger is created successfully, as a start-up activity, transfer the historic data to SPL using GCU1.
Hope this info helps you.
With Regards
Vijay Gajavalli

Transaction Currency Tables which will give totals only

Transaction currency purpose bseg, bkpf, bsis, bsid contain document wise details hence will not be useful for my purpose, i need a table which will give transaction currency totals only.

Hi Anu,
I am unable to understand your exact requirement as if you need total of any transaction currency then there must be a criteria for the same like one want to add all currencies monthly/annually/weekly for reporting purpose and in this case you have to write a report and add currencies.No tables can hold such calculative recordes.
Please elaborate more so I can u'stand requirement.
Regards,
Gaurav

How to use currency format set

Hi All,
I have to use currency format set to mask the amount values to their respective currencies ,
i reviewed the Oracle XML Publisher Administration and Developer's Guide and followed all the steps mentioned there ,i m also quoting the same over here
To define a Currency Format Set:
1. Navigate to the Currencies page under the Administration tab. Select Create
Currency Format Set.
2. Enter a Name and a Code for the set. The Code is a unique identifier and cannot be
changed later. Select Apply.
3. The Currency Formats page will display for your newly created set.
To add currency formats to the Currency Format Set:
1. Select Add Currency Format to add a format to your set.
2. Select a Currency Name from the list.
Note: This list is generated from the FND currency table and
should include all ISO currencies. Additional currencies can be
added from the System Administrator responsibility.
3. Enter the Format Mask you wish to use for this currency and select Apply.
The Format Mask must be in the Oracle number format. The Oracle number format
uses the components "9", "0", "D", and "G" to compose the format, for example:
9G999D00 where
9 represents a displayed number only if present in data
G represents the group separator
D represents the decimal separator
0 represents an explicitly displayed number regardless of incoming data
See Using the Oracle Format Mask, Oracle XML Publisher Report Designer's Guide for
more information about these format mask components.
After a currency format has been created, you can update or delete it from the Currency
Formats page.
i followed all the above step ,i need to use germany currency ,i have also used the format-currency command in my RTF template,but still its not working ,i used 9G999D00 for masking .
Any hint would be very helpful ,thanks in advance .Please let me know if my question is not clear
Thanks
Pratap

hi all
Thanks ,this is resolved ,i just missed clearing cache ,after clearing the cache its working .
thanks
Pratap

Financial Plan in Multiple Currency

Hello,
In the HTML screens I want to create Budget Lines using Multiple Currencies. This means create a line in USD for a certain Task and for the same Task create also an Euro line. I've checked the Multiple Currency option at the Financial and Workplan also added each Currency to the Work - and Financial Plan. Still I'm not able to enter Budgte Lines in other than the functional currency USD. Can someone help me out on this one or send information how this functionality has to be ste up in Release 12?

First you need to do setup for the Multiple Currencies under "Plan Settings" Tab of Planning Options. Check "Plan Amounts in Multiple Currencies" check box and in the "Currency" Tab select the different currencies like EURO and give the rate.
Now go to your Budget Lines and add 1 budget line using your default USD currency. Now select that Budget Line which you have created using your Default Project Currency and also select "Add Currency: EURO" from the Drop Down List of "Select Planning Elements" and press GO button. This will create another Budget Line using EURO Currency. Now enter the Quantity & Cost and see the difference of Cost Calculation.
I hope it's clear for you.
Regards,
Khan.

Currency scaling in screen output

What causes the screen output of currency values to scale up by a factor of 100. I'm working with the condition values of the KOMV structure in SAPLV61A used with the condition values of items in sales orders and delivery notes.
Here's an example.
Just before the PBO module displays, currency values in the internal structure (KOMV-KBETR and KOMV-KWERT) might be 1200.00. As soon as it appears on the output screen it jumps to 120000.00.
I can't find a reason for this in the PBO code.
What causes it?

Hello ED,
1. Retrieve currency field ( referenced field, eg: WAERS) , while running a select query and put it in internal table.
And at the time of display add CURRENCY addition to the write statement.
LOOP AT T_TABLE INTO FS_TABLE.
WRITE:/ FS_TABLE-KEBTR,
FS_TABLE-KWERT CURRENCY FS_TABLE-WAERS(eg).
ENDLOOP.
This is a vote of information.
Try making test-cases.
Thanks,
Zahack

Currency key missing and consequences in Generic extraction!

Hi,
I am creating datasource using view .
there are some fields in the view which were referenced to some other fields of same table!
that some fields are nothing but the currency fields and are refered to currency key fields.
But currency key was not included in the list of requirements for the view and if u do not include this currency key in the definition it will not allow you to activate the view!
what should i do now?
Raj

HI,
Even though it is not there in your requriement you must have to add currency / unit reference field in the view for keyfigures. Beacuse for each and every keyfigure will follow currency / unit value. Add Ref currency / unit field then activate.
Regards
Rajesh

How to remove currency symbol in PLD

Hi All,
I would not like the currency symbol to be printed in PLD. Can anyone plz help me.
Regards,
NN

Hi Rich,
Try this,
for example: Document Total - Field ID -> F_123
->> Open your PLD.
->> Create 1 Formula Field in Page Footer and put the below formula in Formula Field.
Amount(F_123)
OR
Substring(F_123,3)
IF you add currency symbol in Doc.Total field.
Formula Field=Amount(F_123)-> Uncheck Tick Mark in Visible at General Tab on Properties Window.
and
Doc.Total = F_123 -> put the Tick Mark in Visible at General Tab on Properties Window.
Regards,
Madhan.

Add currency to 0UNIT

Similar Messages

Maybe you are looking for