Add custom area menu to S000 menu

HI , i create an area menu in se54n, i want this area menu into Material Management Module folder in s000 menu?
I try to modify the s000 menu and add my folder ( insert as subnode), but i can´t see the folder in the s000 menu
Thanks

Hi,
Please check my previous reply for other thread on how to add custom area menu to S000 step by step.
Re: Adding ZTcodes in Main menu
Regards,
Ferry Lianto

Similar Messages

Attaching Customer area menu ( ZMENU ) to SAP menu

Hi all,
I have a Z area menu which has some Z transactions attached to it. This Z area menu must appear under HR in SAP menu. what is the procedure do this ?
Thanks

if u want to add only this menu in sap menu then
goto su01
for u r user id, in defaults tab give u r area menu in start menu.
regards.
santhosh reddy

Interactive Report - Add a 'custom' Action Menu Item

Hi,
I'm wondering if it is possible to add 'custom' Action menu items to an interactive report?
I have a situation where I want to use all the richness that an interactive report gives with it's out of the box functionality, then if a download is selected I need to be able to set a 'lock' on the currently selected records set before the records are downloaded.
I've had a good look around the forum and various other sites and I can't seem to find anything in this area. The nearest I can find is on the OBD tutorials the ability to add a 'Reset' button.
I know how to create custom download functionality, to which I could add the required record locking functionality and in turn link to a button, but what I don't know how to do is pull out the selection variables from the Interactive Report in order to construct my select query.
Maybe I'm barking up the wrong tree and there's a better way if so any suggestions would be most welcome.
Many thanks in advance Peter..
Edited by: Pete on Jun 30, 2011 4:16 PM
Edited by: Pete on Jun 30, 2011 4:24 PM
Edited by: Pete on Jun 30, 2011 4:31 PM

Hi,
For your issue, in SharePoint Designer, Click Custom Action->View Ribbon->Create Custom Action.
Then the extra form will show up in the Ribbon.
Refer to the following link:
http://www.abelsolutions.com/totm/creating-a-custom-action-in-2-steps-with-sharepoint-designer/
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Area Menu

Hi all,
I have a requirement wherein I need to create an area menu for few reports.
But when we double click on the report the report should open up in the same screen (selection screen and report o/p) and not in the new screen.
I have checked the standard report u2018SAPTLIST_TREE_CONTROL_DEMOu2019 but was of no help.
Can someone help me on this?
Regards,
Sachin M M

Area menu? Have you tried SE43N. this can be a simple config type functionality.
If you need to write a program. Yes, you can but lots of coding required for this type of requirement.
Define the tree structure and add programs to nodes with (execute symbol) and hotspot. When user clicks on this, get the field and execute the transaction that is associated with the node. This will execute in the same screen.
check out the following programs:
SALV_DEMO_TREE_DATA_UPDATE
SALV_DEMO_TREE_EVENTS
SALV_DEMO_TREE_FUNCTIONS
SALV_DEMO_TREE_METADATA
SALV_DEMO_TREE_SELECTIONS
SALV_DEMO_TREE_SETTINGS
SALV_DEMO_TREE_SIMPLE
From SE43N - You can then add this area menu to users from SU01 (talk to basis)

Table for area menu

Hi All
I have created custamized area menu and added transaction codes in this menu.
I want to know which table these transactions are stored.
Regards
Kumar

TADIR table will have entry for the customized area menu.
R3TR SHI3 ZMENU(your menu)
TMENU01R table will have the transaction codes created in menu.
give REF_TYPE as TCOD , REF_OBJECT as ztcode(your tcode) and execute.

IPhone iOS 7 "Add Custom Labels" order changed...No Longer Alphabetized!

Help! I updated my iPhone4 to ios 7 with the recent update. I love everything about it, but when trying to find a custom label in "Contacts > John Doe > Edit > Mobile" and then scrolling down under the "Add Custom Label" menu, I found out that all of my custom labels which had previously been in alphabetized order were ordered according to what I can only guess was their date of creation. With a massive list of clients and contacts from various walks of life and organizations, I created a reusable Custom Lable system since I came across that need in my line of work. After ios 7, that suddenly got rearranged. It never occurred in any other software or hardware update and I've been with iPhone since first gen. How can take my Custom Labels and return to the alphabetized order with which they were previously arranged without losing ios 7? Thanks for your help in advance.

Hi Konsultix!
Yeah, the customizable phone labels have been a real blessing up until recently. If they ever figure this out, you should give it a try. As for the lack of responsiveness which robodr mentioned, I'm not surprised. We've pretty much been an all-Apple campus at my work with computers, portable devices, & even iPhones due to Apple's history with the philosophy of user-friendly simplicity. Unfortunately, that philosophy seems to be changing towards lazy unforeseen complexity. The Mavericks switch (though free), the iWork updates, the rough iMovie launch, glitches with copier drivers resetting, the ios7 glitches, even this inexcusable lag in customer service here, all of it has my board and me rethinking our company-wide devotion to Apple including our iPhones. If we're constantly troubleshooting, then Apple's nullified their advantage in the business sector and we might as well go for the cheaper Windows product since we're still constantly wasting our time & $$ on IT. IT savings was the whole reason we convinced the board to switch in the first place. Without it, Apple might as well kiss our money goodbye. When Steve Jobs was alive, every detail was so well-thought out and customer service was at the top of its game. Now, it's been a month since I posted a problem on Apple's website and no reply. I'm glad to have this poor experience because, honestly, the timing couldn't be better. My organization's AT&T phone contracts are expiring and we might begin switching more than our provider on this campus.

To Add Custom Tcode in SAP Menu

Hi ,
I want to edit the standard SAP menu in sap easy access screen and need to add one custom transaction.
Under the sap menu:
Logistics --> Sales and Distribution --> Shipping and Transportation > Post Goods Issue> Custom Tcode
Anyone please let me know,how to get this done.
Thanks in advance,
Savitha

Hi,
Creating your own SAP Customized Main Menu
You can add additional menu transaction in the SAP main menu without affecting the original SAP default area menu S000.
For example, you have created a transaction code called ( z123 - ABC Own Report ) and you want to insert it under Logistics. The specific user will be able to access ABC Own Report by clicking Logistics -> ABC Own Report.
Steps :-
Goto Transaction SE43 - Area Menu
Click the copy button. Copy from S000 to ZXXX
After copying, click Change (area menu ZXXX)
Double click on Logistics and add in your transaction code in the AreaMenu.
Remembers to Activate it.
Next Goto Transaction SU01 - Maintain users
Type in the user name and click the Defaults button
Type in the area menu (ZXXX) in the Start Menu field.
Click Save
The user will be able to see the additional transaction on the next logon.
Regards,
Nagaraj

How to create a new transaction and add it to Area Menu

Hi.
I have to create a report and run the report using the Tcode and Tcode has to be added in the Area Menu at the initial screen.
Please tell me how can i do that.
Thank you in advance

You can add additional menu transaction in the SAP main menu without affecting the original SAP default area menu S000.
For example, you have created a transaction code called ( z123 - ABC Own Report ) and you want to insert it under Logistics. The specific user will be able to access ABC Own Report by clicking Logistics -> ABC Own Report.
Steps :-
Goto Transaction SE43 - Area Menu
Click the copy button. Copy from S000 to ZXXX
After copying, click Change (area menu ZXXX)
Double click on Logistics and add in your transaction code in the AreaMenu.
Remembers to Activate it.
Next Goto Transaction SU01 - Maintain users
Type in the user name and click the Defaults button
Type in the area menu (ZXXX) in the Start Menu field.
Click Save
The user will be able to see the additional transaction on the next logon.
The CUA area menus are converted to tree navigation in Release 4.6A. The menu contents are automatically copied into a new data structure in Upgrade to Release 4.6A or higher. You can edit Area Menus with a new maintenance interface (Area Menu maintenance transaction: SE43 ).
Reporting Tree Integration - Only transactions could previously be put in Area Menus. From Release 4.6A you can also put all the types of reports which are in reporting trees, in Area Menus. The system automatically assigns a transaction code to call the report from the menu. If you have already put the report in another Area Menu, no new transaction code is generated, the unique transaction code already assigned is used.
You can create Area Menus from complete reporting trees with the migration transaction RTTREE_MIGRATION . The report transaction codes are generated automatically.
Reporting trees can only be displayed. They cannot be maintained. To modify the contents of reporting trees, you must convert them with the migration transaction. You can then modify the contents with the Area Menu maintenance.

Add custom command in the context KM menu

Hello All,
Wanna know if its possible to add custom command in the KM context menu?
If yes, please guide as to how can I do this....
Example: Print option in the context menu
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Hi Ritu,
   Yes, you can do that.
   First of all, you should identify the layout set that you are using. If you do not know it you can enable debugging setting option.
   Then, you must know where you need to appear this command. I mean, in a folder, link or document.
   If you are using a standard layout you should not modify it, you must duplicate it (you ca use advance copy).
The command must be added in a group command, you can use an exist command or create a new one. (System Administration-System Configuration-KM-CM-User Interface-Command Groups). Before that you can create your command.
These groups are referenced from collection and resource renderer. A layout set is a set of collection and resource rendeders.
You should read this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/98/dd48a9b4a197489a54187c99372bce/frameset.htm
Once you added your comamnd a group and assign this group in your collection or resource renderer. You have to assign this layout to your km navigation iview or directly the folder.
Don't forget to enable presentation service in your repository in order to change the layout.
Patricio.

Error when Copying and Changing Area Menu S000

Hi Guys,
I have copied the area menu S000 to Z000 and I have been able to add my own menus there. However, there are some unnecesary menus on that area menu and I am trying to remove them. I have been able to remove the children of these menus, but am not able to remove the roots. Whenever I try to remove them, it gives the error:
"Delete only nodes with enhancement ID '' (node ID:'CAMPUS')", for example.
The menu items are:
Student Lifecycle Management,Hospital, Clinical System, Insurance, Telecommunications, and Utilities Industry.
Also, the added menus are put at the top of the area menu, is there a way of putting them at the bottom?
Regards

HI - I too have the same / similar problem. I have copied S000 to Z000 ... but now if I set Z000 as default menu then it shows Hospital and Campus Management etc. But these dont show when using S000.
I either need to prevent them showing (in the same way as they dont show in S000) or delete them from Z000 but deleting them is also a problem for me becuase of the error message described above "Delete only nodes with enhancement ID"
Any ideas appreciated
Thx

Some add-ons are missing in the tools menu and / or modules and navigation bar

I am running Firefox 20 FRENCH (this is maybe important as all of this below does not appear with the EN version...) on MacOSX 10.6.8.
Symptoms :
- Web Developer toolbar not displayed anymore.
- Xmarks add-ons not displayed in the module bar.
- Icons of other add-ons displayed in the navigation bar ONLY after the first firefox opening i.e. just after system restart. If firefox is closed and re-opened, all the add-ons icons are lost.
> All the add-ons are installed in tha add-on menu.
> This behavior only appear with the FRENCH versions of firefox (tried 19.0.2 and 20).
> Installed the 19.0.2 ENGLISH version and all is OK !!!
Fixes attempts (tried almost everything...) :
- Reset firefox profile and restart with a new one : no effect (after I have reinstalled all the add-ons one by one...)
- Uninstall Firefox (with profiles folder, cache folders, etc...) then reinstall : no effect
- The only thing that is working is using the ENGLISH version...
This is really annoying because as a web developer I really need the Web Developer extension.
Does anyone has an idea of how to fix this ?
Thank you very much for your help !
Regards,

Does it have any effect if you change the general.useragent.locale pref to en-US ?

Add a URL link to an area menu (SE43)

Does anybody know an possibility to add a URL link to an area menu in SE43?
Best Regards
A.B.

Hi.,
As far I know it is not possible to create URL link in Area Menu., instead, Create a Report and call Function 'CALL_BROWSER' and pass the url to the function module.
Now create a Transaction for this report let say ZURL,
Now Assign this transaction to Area Menu So., When you click that transaction in Area menu it will open Url in browser.
hope this helps u.,
Thanks & Regards,
Kiran

S000 screen area menu

Hello All
I can see tht area menu in my new server in a package, but its not coming on the intital screen
pls let me knw what can b done to make it available on initial s000 screen.
Thanks,
Vibha

Hi,
You can transport an Area Menu manually if a transport error occurred or you want to transport it into another system than in the transport request.
Prerequisites
You are in the Area Menu maintenance initial screen.
Procedure
Enter the menu name in the Area Menu input line. You can choose from the possible entries help or your favorites.
Choose Area Menu ® Transport.
Create a transport request or choose an existing one.
Choose Continue.
Result
The Area Menu is transported into the specified target system.
Regards
Sudheer

How to add z transaction to area menu fo sap initial screen

Hi,
we have created 'z transaction'. how to attach it in area menu of sap initial screen.
we need to attach it to logistics>financial accounting> clients.
could you please help me .

Hi,
There is no need of creating any t-code for a area menu. The area menu name given by is the t-code to acces the area menu.
SO create the area enu with the name which you want to create the t-code.
To create a t-code to a standard area menu just go to se43 and copy the standard area menu to your z area menu (z area menu name should be the t-code you want to create.)
If you know the transaction code of that clients then goto se43 and give that transaction code and then copy to z_transaction code.
If you dont kow the transaction code of that clients then open clients throuch the path logictics->fiancial accounting->clients then look at the status to find the t-code.
Thanks
Kiran.
Edited by: kiran Pasala on Feb 28, 2008 8:39 AM

How to download list of transaction from SAP area menu in SAP1 transaction

Hello All,
My requirement is I want to download the list of transaction under the SAP area menu in SAP1 transaction.
I tried with SE43, entered area menu as S000, but it doesn't give me of the same hierarchy and some transaction were missing, for example IH08 is available in SAP1 transaction and not available in SE43.
Could you please let me know is there any way to download the list.
Regards,
Thanga

If you open SE43N, type SAP1 and Display (F7), Tree is shown with collapsed nodes. Print option in Menu shows the same tree as a list. The nodes do not get expanded by default.
So in order to get expanded tree in list ( so that transaction codes can be seen), you need to expand the tree before choosing Area Menu > Print.
This works for average area menu which is less number of transactions.
Since you are looking for SAP1, it has lot of transactions, and on expanding it, information message is shown as:
The tree could only be partially expanded for performance reasons
Diagnosis: The hierarchy could not be completely expanded for performance reasons; it has too many subnodes.
Procedure:
Restrict the number of nodes to be expanded by expanding a lower-level node
or
Expand this node repeatedly until this message no longer appears. The hierarchy is then completely expanded.
As a result, IH08 transaction which is under Quality Management node can't be seen in list view as overflow occurred before this node was reached.
On debugging, it can be seen that the tree is expanded recursively by standard until an overflow flag is set.
In order to get around this overflow protection, you can write a custom code.
Below snippet is for demonstration purpose.
1. Run FM BMENU_DISPLAY_RSTREE in SE37 with tree_id as QM01
2. Run my snippet that calls same FM in the end
Compare 2 outputs and see the difference.
I am going 1 level deep and IH08 transaction can be seen in output.
Similarly, you can write a code that recursively expands every sub-tree found so that entire list can be seen.
DATA: ls_nodes TYPE hier_iface,
      lt_nodes TYPE STANDARD TABLE OF hier_iface,
      lt_nodes1 TYPE STANDARD TABLE OF hier_iface,
      lt_nodes2 TYPE STANDARD TABLE OF hier_iface,
      lt_refs1 TYPE STANDARD TABLE OF hier_ref,
      lt_refs2 TYPE STANDARD TABLE OF hier_ref,
      lt_text1 TYPE STANDARD TABLE OF hier_texts,
      lt_text2 TYPE STANDARD TABLE OF hier_texts,
      lv_tree_id TYPE hier_guid VALUE 'QM01'.
* read top level node
CALL FUNCTION 'STREE_HIERARCHY_READ'
EXPORTING
    structure_id       = lv_tree_id
    read_also_texts    = abap_true
TABLES
    list_of_nodes      = lt_nodes
    list_of_references = lt_refs2
    list_of_texts      = lt_text2.
* read hierarchies of sub-trees
lt_nodes2 = lt_nodes.
LOOP AT lt_nodes INTO ls_nodes WHERE node_type EQ 'AMRF'.
CLEAR: lt_nodes1, lt_refs1, lt_text1.
CALL FUNCTION 'STREE_HIERARCHY_READ'
    EXPORTING
      structure_id       = ls_nodes-reftree_id
      read_also_texts    = abap_true
    TABLES
      list_of_nodes      = lt_nodes1
      list_of_references = lt_refs1
      list_of_texts      = lt_text1.
* add sub-tree details to main tree
APPEND LINES OF lt_nodes1 TO lt_nodes2.
APPEND LINES OF lt_refs1 TO lt_refs2.
APPEND LINES OF lt_text1 TO lt_text2.
ENDLOOP.
CALL FUNCTION 'BMENU_DISPLAY_RSTREE'
EXPORTING
    tree_id       = lv_tree_id    " Unique ID - 32 Characters
TABLES
    list_of_nodes = lt_nodes2    " Hierarchy Maintenance Tool Node Passing Interface
    list_of_refs = lt_refs2     " List of References to Structure Items
    list_of_texts = lt_text2.    " General Structure Repository Node Text

Add custom area menu to S000 menu

Similar Messages

Maybe you are looking for