Add custom command in the context KM menu

Hello All,
Wanna know if its possible to add custom command in the KM context menu?
If yes, please guide as to how can I do this....
Example: Print option in the context menu
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Hi Ritu,
   Yes, you can do that.
   First of all, you should identify the layout set that you are using. If you do not know it you can enable debugging setting option.
   Then, you must know where you need to appear this command. I mean, in a folder, link or document.
   If you are using a standard layout you should not modify it, you must duplicate it (you ca use advance copy).
The command must be added in a group command, you can use an exist command or create a new one. (System Administration-System Configuration-KM-CM-User Interface-Command Groups). Before that you can create your command.
These groups are referenced from collection and resource renderer. A layout set is a set of collection and resource rendeders.
You should read this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/98/dd48a9b4a197489a54187c99372bce/frameset.htm
Once you added your comamnd a group and assign this group in your collection or resource renderer. You have to assign this layout to your km navigation iview or directly the folder.
Don't forget to enable presentation service in your repository in order to change the layout.
Patricio.

Similar Messages

"Could not complete the custom command because the ICC profile is invalid"

I got the above message when I attempted to soft-proof an image in Photoshop CC on Windows 7 64-bit.
I had downloaded the ICC profile from drycreekphoto.com, specifically:
http://www.drycreekphoto.com/icc/Profiles/IccFiles/Arizona/Costco-AZ-Tucson-NW-Lus.icc
and installed it by right-clicking on the downloaded file and selecting "Install profile"
Windows installed the profile in the following directory:
C:\Windows\System32\spool\drivers\color
Then in Photoshop CC, I did
View -> Proof setup -> Custom
But when I selected the above profile from the dropdown list, I got error message
"Could not complete the custom command because the ICC profile is invalid"
Does this mean that the profile is really invalid, or am I doing something wrong?
FYI I am new to color management. This was my first attempt to soft proof an image.

I can't quite figure out how it got that way - it has part of an ICC profile structure, but quite a bit wrong. Even debugging tools can't read it as an ICC profile.
It's probably the one file - let drycreek/costco know so they can replace it.

I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.

I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

How can i add Custom fields into the

Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
Sajid

Hi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek

Add custom field in the F4 help for selecting source field in tcode FMDER

HI,
I an working in FUND MANAGEMENT, i want to add custom field in the F4 help for selecting source field in t-code FMDERIVE.
How this possible.
Regards,
Pankaj

OK

Transaction to add custom message to the message class

Hello
Can somebody tell me transaction name to add custom message to the message class (ZBW)
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_CLASS = 'ZBW'
thanks

Hi,
The tcode is SE91. Give this message class and add the message to it.

Is it possible to add an item to the context menu when you control-click...

an application? More specifically, when someone ctrl-clicks my application, I want an item to appear in the pop-up menu and if selected, to run an apple script. I was looking at folder automation and all and it seems like the area where I would look to do something like that. I have been looking for a while and can't seem to find it.
I found something about making an action specific to just your app such as: MyApp.app/Contents/Library/Automator/MyAction.action. Maybe I am barking up the wrong tree. Can this be done? If so, how? So far I do not see how to add something to that menu.

Ok, I found out that thing I am looking for is a CMM (Contextual menu modules), but so far I can only find references to ones made, not how to make one.

Gnome: Add custom command to Removable Media application

I'm trying to setup cvlc to run a DVD when inserted into the drive. I created a cvlc.desktop so it is seen when I go to to the Removable Media menu but it doesn't work because a custom command is required. How do I configure it so that one can be run? The cvlc command to run a DVD is:
cvlc dvd://
Any ideas?

Try modify /etc/PolicyKit/PolicyKit.conf as root:
<match user="$USER">
<match action="org.freedesktop.hal.storage.*">
<return result="yes"/>
</match>
<match action="hal-storage-mount-fixed-extra-options">
<return result="yes" />
</match>
<match action="hal-storage-mount-removable-extra-options">
<return result="yes" />
</match>
</match>
Change $USER for your username... then /etc/rc.d/hal restart as root

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

The Firefox spell checker has the option for me to add custom words to the dicionary. Please tell me how to delete a word from this file of custom words because a mispelled word got in there by mistake.

I want to know how to delete words from the custom dictionary in the spell checker that I put there by mistake.

In your profile directory, the file is '''persdict.dat''' and you should know how to get to your profile. One way is to enter '''about:support''' in the location bar then click on "Open Containing Folder". Or go through the Help menu > Troubleshooting Information > ...
You can edit with wordpad, or notepad++, but not with notepad,
because there is one word per line and you will not see that in notepad after Firefox has updated it.  Update after closing Firefox.
I will have to change my Spell Check documentation to not suggest notepad
:http://dmcritchie.mvps.org/firefox/tab_capacity/001_with_underscore.htm#spellcheck

How to add custom columns to the list view in Finder

Hi,
I'm looking for a way to view additional file details in the list view in Finder, for example audio bit rate, so I don't have to do "Get Info" for each file separately. I couldn't find a way to add columns other than the ones listed on the view options dialog.
Can anyone help me find a way to do it?
Thanks,
Tal

Have you checked the Help menu for what you want to do? I found this in Apple support - List View Options
Check the AppleScript Forums. There is probably a script that you can use.

How to add Custom Attributes in the SOAP header for OWSM

Hi,
I like to know how to add the Custom Attributes in the SOAP header for OSWM username token authentication.
Currently we are getting the header element like
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
here we need to add the attribute "soap:mustUnderstand="1" , so the element will look like
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
Any info on this will be helpful.
Thanks,
ArunM

Hi Jay, you can make it in more than 1 way.
I suggest you the following:
- create an URL iview that points to any URL you want.
- define a Resource that points to the iview (with a window name, to open in new window)
- define an Area that points to the resource
- add your new Area to the your current Area Group
Regards!

Add custom field in the selection screen for shopping cart monitor report

Hello,
refering to the notes 458591 an 672960, in order to add custom field at item level, we get the structure INCL_EEW_PD_ITEM_CSF.
But this doesnt make it appear on the "Shopping Cart Monitor Report" selection screen.
So should I try adding it in the existing interface of the badi bbp_sc_mon ?

hello Yann,
ok I will implement that. Is it possible to change the interface of the badi method to include more data if we want to check the role of the user who is executing the shopping cart monitor report and accordingly do the settings of field display ? Or calling a function module inside the method to get the attributes of sy-uname would be easier?
rita

How to add custom buttons in the tool bar of the crystal reports viewer

Hi,
I'm using Crystal report viewer (Crystal 2008) in my report and I want to add custom buttons and handle them in the tool bar of the viewer. Is there anyway to achieve this?
Please help me in this regard.
Thanks in advance.
Siva.

I did this by adding a picturebox to the toolbar, the same size as the buttons, and loading in an image, and putting code into the Click event of the picturebox.
I also put code into the MouseHover event to change the picture's background color and into the MouseLeave event to change it back.
I have a couple of these buttons. They work very nicely and really look like part of the toolbar.

MR51 : add custom field in the alv list

Dear.
I need to add a custom field in the alv layout of MR51.
Do you know any exit in order to obtain this ?
Thanks.

Hi,
try this
I think there is no exits for same
copy program of MR51 and make z one and add filed what filed you want to add
Regards
kailas Ugale

Add custom command in the context KM menu

Similar Messages

Maybe you are looking for