Add Custom Field in VF01 in Screen 104

Hi,
I want to add one single character zfield(check box) in VF01 screen no: 104 (Over view of Billing Items) ,If the user tick this check box, it means the new billing invoice created is RE-BILLING invoice(the invoice is created again after cancellation).
I am not able to find any screen exit for this.Please can you help me in the solution where the change should be very limited,It would be really great if there is any soultion that i can do without any modification to SAP standard. <removed by moderator>.
Thanks in Advance
Ranjith
Edited by: Ranjith Rupireddy on Jul 5, 2011 9:56 AM
Edited by: Thomas Zloch on Jul 5, 2011 9:57 AM

Hi Eduardo
Thanks for your reply, but VF04 is "Maintaining Billing Due List" ..Which is no where related to screen 104 of VA01..
Here the requirement is when creating the Billing document with Billing type "Invoice Before GI" and press enter it takes to screen no:104 "Over View of Billing Items" Here i should add one check box and update .It will be available in display mode in VF02 and VF03.Actually there is no screen exit also for this as i mentioned earlier.I want to know is there any other good solution in which it can be done without adding this field manually in screen painter and updating the same with available enhancement.Thanks in advance
Ranjith

Similar Messages

Add Custom fields in Report Incident Screen in EHSM

Hello experts,
I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
I have added two fields.
Business Object: EHHSS_INCIDENT
Node: BASIC_INFO_ALL
Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
Now how can i link with my screen and how to fetch notification data (standard F4 help)?
and when i save data, where it will save?
Can you guide me with proper steps for it as i am new in it.
Thanks in advance.

Hi Jayvin,
To add the above fields on the screen, open the component configuration of the required screen.
Enhance the same and add the fields from the respective Node.
You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
Regards,
Sanket.

Add custom field in the selection screen for shopping cart monitor report

Hello,
refering to the notes 458591 an 672960, in order to add custom field at item level, we get the structure INCL_EEW_PD_ITEM_CSF.
But this doesnt make it appear on the "Shopping Cart Monitor Report" selection screen.
So should I try adding it in the existing interface of the badi bbp_sc_mon ?

hello Yann,
ok I will implement that. Is it possible to change the interface of the badi method to include more data if we want to check the role of the user who is executing the shopping cart monitor report and accordingly do the settings of field display ? Or calling a function module inside the method to get the attributes of sy-uname would be easier?
rita

Add customer field in IH08 selection-screen

Hi guys,
I need to add 1 customer field ZZ to the selection screen IH08 in order to search equipments by the ZZ field.
Did anybody know if it is possible?
Thanks in advance,
LMS

I use enhacemente ITOB0001 to add one field to the screen of equipments (IE01, IE02 and IE03) and that is working perfectly.
In IH08, i put an append structure on structure RIHEQUI_LIST in order to the ZZ field could be seen in the ALV list. But, my problem is to make that ZZ field searchable... I need to search equipment on IH08 by the ZZ field.
I look on SPRO, for the equipments lists customization, i made tests and tests but nothing works...
If anybody knows how to solve this, please help me.
Other chance is to develop a Z program... But i prefer use the IH08...
Best Regards
Edited by: Luís Silva on Jul 31, 2009 11:28 AM
Edited by: Luís Silva on Jul 31, 2009 11:29 AM

Custom field in Basic data screen of invoice entry screen

hello,
I want to add custom fields in basic data screen of Invoice entry in SRM 5.0.
As invoice Entry screen is divided into three parts:
1. Basic data Screen
2. Header data screen
3. Item data screen
Now according to OSS Note number 672960 we are able to add Custom fields in the header as well as item data screen of invoice entry without any difficulty.
but our requirement is to add custom fields in the basic data screen.
Is there way available to add custom fields in the basic data screen.
Thanks
Sarabjeet

hi
check this spro path
Financial Accounting (New) --> Travel Management --> Business Add-Ins and User Exits in Travel Management --> Entry --> Screen Modifications: Adjustment of "User Data" Screen

Custom Fields to Contract 'Conditions' Screen

Hi
Please share how to add custom fields to Contract 'Conditions' screen just like 'Unit Price'.
As there is no '_CI' table for conditions table, we are not able to implement the same. We also tried using BDT but to no avail.
Regards, Sekhar

Thanks for the reply Bala
The requirement is to add three more informational fields beside/below the Unit Price. Those fields should hold data, condition wise. i.e. it requires to add 3 more columns in VICNCN table to which I'm afraid there is no custom include available. Also we referred note 690900. Please help how to proceed.
Thanks, Sekhar

How can i add Custom fields into the

Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
Sajid

Hi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek

User exit or Badi to add custom fields in selection screen of tcode CATS_AP

Hi Guys,
I want to add a custom field to the selection screen of report RCATS_APPROVE_ACTIVITIES (tcode CATS_APPR_LITE).
I also want to display filtered by this custom fields. Please let me know the user-exit (prefebly) or BADI.
I will appreciate if somebody can share the steps.
Thanks,

Hi,
Yes there is, the BADI name is CATS_REPORTING.
It can be views in transaction SE17.
thanks.
JB

REPORT PAINTER - Add a field to a selection screen - custom report

Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
Julien

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

REPORT PAINTER - Add a field to a selection screen to a CUSTOM REPORT

Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
Julien

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

Add Custom field to standard screen with table control

Hello,
I need to add two custom fields to a standard screen in CAT2 transaction(not using any screen exit).I will be given SSCR key.The standard screen (screen no. 2100) only has a table control.
How can I add the custom field such that it appears as a field on the screen when CAT2 transaction is opened.
Do i need to write any code?
I'm new to ABAP so could you please give a detailed explanation.
Also, do i need to change the 'fixed columns' field in the table control?
Regards,
Monica.

hi,
1) find the screen
2) add new fields to the screen
3) program PBO and PAI
regards,
Wojciech

User Exit to add custom field in Component Screen

Hi Friends,
I searched alot but could find exit to add custom field or tab in material component detail screen for SAP 4.7. Please let me know if there is any exit or workaround possible.
Thanks,
Raj

BADI is available to create custom field in material component , but it is available as of ECC 6.0 EHP3 , not sure about 4.7

How to add new fields in message creation screen

Hi All,
My requirement is to add another 2 fields in the message creation screen.
Also I found this link is bit useful.
Add custom fields to Support Message
Can anyone share the detailed procedure to add a field in the message screen.
Thanks in Advance.
Regards
Narasingam. B

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

How to add Custom fields ( under the Custom Tab) in RMMAIN ( SOLMAN 4.0)

Hi Expert,
I am working in SOLMAN 4.0
i want to add some Custom fields in RMMAIN Transaction -Screen level..( under one custom tab)
i have tried in EEWB, it is not helpful for RMMAIN
is any Screen exit available for RMMAIN? or any other way?
I ll give Reward points
Thanks & Regaids
Ganesh, R

Hi,
go through this...
https://wiki.sdn.sap.com/wiki/display/Snippets/Displaycustomerfieldsinheaderoflogisticsinvoiceverification+transactions
Thanks,
Shailaja Ainala.

Add Customized fields in FICA document

Dear all,
We are having a requirement in which we need to add customized fields in FICA document and need to post them .Can anyone please tell me how to meet this requirement
susmita
Edited by: susmitha harini on Aug 11, 2010 12:46 PM

Hi Susmita
You can add the fields to the customer includes
CI_FKKOP
CI_FKKKO
To create/update the customer fields in automated processes you can use the standard SAP BAPI:
BAPI_CTRACDOCUMENT_CREATE
BAPI_CTRACDOCUMENT_CHANGE
Check out the import table EXTENSIONIN with structure BAPIPAREX.
To add the fields to the standard SAP transactions, have a look in IMG under
Financial Accounting
Contract Accounts Receivable and Payable
    Basic Functions
      Posting and Documents
        Document
          Screen Preparations
Yep
Jürgen
Edited by: sattlerj on Aug 12, 2010 8:45 PM
Edited by: sattlerj on Aug 12, 2010 8:49 PM - Added EXTENSIONIN

Add Custom Field in VF01 in Screen 104

Similar Messages

Maybe you are looking for