Add Date and Time Stamp to video from AVCHD folder
New to this software and forum, so I apologize if this has been asked and answered. I am trying to insert the date and time metadata from the AVCHD folder using the .mts clips. Curently I am using VaTS to stamp the video then render the clips through Power Director. I would appreciate any help on this topic. Thank you for your time
BenB, thanks for responding to both of my posts. The footage was shot using a Sony HDR-XR500 AKA consumer video camera. Date and time is not burned into the image when captured digitally. The only way to do it would be to run the video through a video capture device that basically just records what the video outputs. This solution really ***** so i'm looking for somthing more effective.
Similar Messages
-
How do you date and time stamp pictures and videos using a EOS Rebel T3?
I am needing to utilize date and time stamping on videos and photos in my work. The pictures and videos must display time, a date, and reference number. I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function.
While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist). DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image. Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).
SO... there are programs that will just do this. You'll need to do a search (I found several but have never tried one so I can't vouch for them). I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed. They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
Tim Campbell
5D II, 5D III, 60Da -
How do you edit out the date and time stamp from a photo
How do you edit out the date and time stamp from a photo
You can blur it out with retouch
The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
Regards
Léonie -
I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?
For such to be visible, yes. Many such apps in the app store.
-
How to get the most current file based on date and time stamp using SSIS?
Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vvhi simon
i excuted this script it is giving error..
Microsoft SQL Server Integration Services Script Task
Write scripts using Microsoft Visual C# 2008.
The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
[System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
The execution engine calls this method when the task executes.
To access the object model, use the Dts property. Connections, variables, events,
and logging features are available as members of the Dts property as shown in the following examples.
To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
To post a log entry, call Dts.Log("This is my log text", 999, null);
To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
To use the connections collection use something like the following:
ConnectionManager cm = Dts.Connections.Add("OLEDB");
cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
To open Help, press F1.
public void Main()
string file = Dts.Variables["User::FolderName"].Value.ToString();
string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
System.IO.FileInfo finf;
DateTime currentDate = new DateTime();
string lastFile = string.Empty;
foreach (string f in files)
finf = new System.IO.FileInfo(f);
if (finf.CreationTime >= currentDate)
currentDate = finf.CreationTime;
lastFile = f;
Dts.Variables["User::LastFile"].Value = lastFile;
Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv -
Date and time stamp with Sony HDR CX7
Hi,
I am trying to figure our how to find date and time stamps for individual clips.
My workflow is as follows: I use disk utility to make a disk image (.dmg) of the memory stick and import the clips from this disk image. Everything works fine, but I am not able to find any date and time information on the imported clips.
I am slowly building a large archive of these disk images and I am wondering whether I need to add some some date an time info manually. I know that this information is recorded on the memory stick as the camera can display them.
Thomas
Config:
Sony HDR CX7
Final Cut Express 4
OS X 10.5
MacBook Pro 2.4GHzI'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No -
Date and Time Stamp - Data Code
I am trying to import HD video from a Sony video camera to iMovie, but require date and time stamp data code to display on the video. The computer imports the video in HD without problem, but does not display the data code information. Options allow for adjusting the date and time within the video clips, which proves the code is in there somewhere, but there are no options to display the date and time stamps.
I have previously accomplished this by running the camera in real time through a Pinnacle movie box, but this is time consuming, and hinders video quality, rendering in standard definition.
Can anyone please assist?
ThanksDate stamp data is not something read by FCP ... try iMovie,
Alternatively, check the camera's output options, it may be possible to output the data burnt-in on the s-video or some such ... if you have the requisite i/o hardware you could then digitize from that signal path -
How to provide date and time stamp to the extracted file.
I 'm downloading data from DB to Flat file using GUI_DOWLOAD. whenever it is executed it is creating with a file name.
if i rerun the program the file is overwriting with the same name.
now based on the requirement how many times i executed, that many times file should be individually created and should be added with date and time stamp.
like
if when i executed at the very first time it should saved with filename, date and time.
say "Address.txt 04/05/2007 07:55:10"
When i executed it for second time it doesn't overwrite the file.
it should create a new file.
like "Address.txt 04/05/2007 07:59:20".
Please guide me the way if possible code.
Thanks in advance.Hi Vamsi,
Use FM 'F4_PROGRAM' to take file from the user .
In this case user will enter the file name. u can append date & time to that file path.
Refer this code.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SY-REPID
DYNPRO_NUMBER = SYST-DYNNR
IMPORTING
FILE_NAME = P_P_FILE.
concatenate P_FILE '04/05/2007 07:59:20' into V_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = i_tab
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc = 0.
MESSAGE i002.
ENDIF.
Reward points if helpful.
Regards,
Hemant. -
How can i get a copy of my ipone messages with the number, date and time stamp?
How can I get a copy of my iphone messages with the number it was sent from and the date and time stamp? Needed for court purposes.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
You should probably consult your attorney to see if either of these will be acceptable. -
Retriving records with the date and time stamp
I need to get all the records that were update between 08:36:06 AM and 8:36:09 AM on the12/15/2009
I am using this query it is giving me the right numbers (I think) because this condition GURMAIL_CPLN_CODE = 'UGAP', I would like something more
precise using the date and time stamp with the dates
12/15/2009 08:36:06 AM
12/15/2009 08:36:07 AM
12/15/2009 08:36:08 AM
12/15/2009 08:36:09 AM
select * from GURMAIL
where
PERMAIL_CPLN_CODE = 'UGAP'
AND TO_CHAR(PERMAIL_ACTIVITY_DATE,'MM/DD/YYYYHH24:MI:SS AM') >= '12/15/2009 08:36%'Thank youYes, but HH24 and AM cannot be used together:
SQL> select to_date('12/15/2009 08:36:06 am', 'mm/dd/yyyy hh24:mi:ss am') from dual;
select to_date('12/15/2009 08:36:06 am', 'mm/dd/yyyy hh24:mi:ss am') from dual
ERRORE alla riga 1:
ORA-01818: 'HH24' impedisce l'uso dell'indicatore meridianoUse this:
select *
from gurmail
where permail_cpln_code = 'UGAP'
AND permail_activity_date between to_date('12/15/2009 08:36:06', 'mm/dd/yyyy hh24:mi:ss')
and to_date('12/15/2009 08:36:09', 'mm/dd/yyyy hh24:mi:ss')or this:
select *
from gurmail
where permail_cpln_code = 'UGAP'
AND permail_activity_date between to_date('12/15/2009 08:36:06 AM', 'mm/dd/yyyy hh:mi:ss am')
and to_date('12/15/2009 08:36:09 AM', 'mm/dd/yyyy hh:mi:ss am')Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2009/12/18/table-elimination-oppure-join-elimination-lottimizzatore-si-libera-della-zavorra/]
Edited by: Massimo Ruocchio on Dec 23, 2009 12:05 AM -
Date and Time Stamp not showing up on import?
I recorded with date and time stamp on my Sony Sr-11 and when I import it in iMovie 11 it's not displayed. Please help so when I import it shows up in iMovie 11.
Playing back the tape in the camcorder that originally recorded the tape with the display output activated, doesn't mean that you actually recorded the date & time as part of the video. Check the user's manual of your camcorder to find out how to record date & time as part of the image - not just to a data track. FCP doesn't access the data code info.
-DH -
Officejet Pro 8620 cannot print without page number, date and time stamps
I have just bought this printer and spent a few days trying to get to grips with it. I managed to solve one problem when I could not access the printing preferences by reinstalling the driver. I cannot remove the print page number and date and time stamps from a print. Please help!
I have managed to solve this by changing page settings. These were oddly reset when the printer was installed.
-
Can you remove a date and time stamp off a photo that has already been taken?
Can you remove a date and time stamp off a photo that has already been taken?
only with Photoshop or similar software that offer some clone/heal feature.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Get-Content and add Date and Time in a new file
Hello,
in a existing file I have data like:
1;Idle
5;chrome
1;spoolsv
Now I need to grab the content and add date and time in front of each line and save it to another file like:
07.04.2015;10:18;1;Idle
07.04.2015;10:18;5;chrome
07.04.2015;10:18;1;spoolsv
But I don't have any idea how I could solve this challange. Does anyone have a helping hand for me?
GreetingsHello,
If you need a new file with the desired output try this
get-content .\current.txt | Foreach-Object{ $dntv = (get-date) ; "$dntv" + $_} | Out-File newfile.txt
regards,
V
Venu -
How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.
BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS
Maybe you are looking for
-
I have an unsaved document open in pages but can not save it because the, "charicter boarders aren't supported and were removed" warning is open and I can not close the warning. How can i get the warning to close so I can save my document? Can I save
-
Problem With Cyan Updates!
My lumia 920 did the cyan update last night and after the update everything is faulty. It doesnt detect my sim like before, it is set to flight mode and i cant set it back now. the time and date is always off. Cant turn it on for long and i cant upda
-
SAP Server Backups from Emergency Area
One of our clients is stuck in a emergency area. It is impossible to move the server right now to some safe place. Client has very limited internet access. Database backups are impossible to send. So what options we have to take as backup? Should we
-
QuickTime X opens up previous session's videos at startup.
I've emptied "Recently Opened" but there are two videos that automatically start up with Quicktime. Help?
-
Generate dynamic flash using other flash app?
Greetings! I was wondering: Imagine having a swf or fla with a dynamic textfield. is it possible to build an application that 1) opens the swf or fla 2) fills in the dynamic textfield 3) regenerates the swf so that in the new swf, the textfield is fi