Add db components to existing db
Hi,
I have 11g r2 installed db and need to add partitioning option to this db.
Can that be done ?
can someone please advise. Thanks
Once you license partitioning, pl see these MOS Docs
How to determine enabled/disabled components in an 11.2 software-only installation (Doc ID 1069015.1)
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=1069015.1&h=Y
11gR2 Install (Non-RAC): Understanding New Changes With All New 11.2 Installer (Doc ID 884232.1)
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=884232.1&h=Y
HTH
Srini
Similar Messages
-
Add WebDynpro views to existing J2EE app
I am having a hard time understanding how i can add webdynpro views to my existing war file. I use Spring, and not EJB's.
I would prefer to have the deployment coupled such that the WebDynpro is within the same classloader as my existing servlets(struts, velocity). I need this because the application uses Toplink for it's O-R, and I would like to share the cache between the Dynpro views, and my struts views.
How would I set up such a project within developer studio?
thanks,
CraigOk, my previous email has skipped too many steps, as I am unable to get things wired as I would have hoped.
Here is the problem in more detail. I have a jar file pago.jar. It has all the domain modeling. We have use AspectJ in creating our domain model (pago.jar) so I understand that I cannot compile that within the SAP DevStudio. I continue to build that within eclipse.
I have a web-application which contains jsp's, velocity files, etc which reference the pago.jar.
I would like to add Dynpro components to access the pago.jar. Ideally I need pago.jar to be loaded within the same classloader as the existing web-application which can be deployed on the SAP j2ee server. However, I am quite happy just getting a WebDynpro hitting my domain model as a first step.
I thought I could create a DC for the pago.jar. But then i quickly get stuck. How do i create a DC which simply wraps this pago.jar? Which type of DC do I create? How do I add the pago.jar to it?
Then with this DC, do I just add a reference to it from my Dynpro DC?
Thanks alot in advance!
craig -
Cannot add new components in Object Browser
Hi,
We have a complex file with about 80 components. The problem is that when I try to add new components, they're not visible in Object Browser. It's possible to drag components into canvas, but not only they don't appear in object browser but also vanish after saving and re-opening the file.
No error messages or hang-ups. It's just as if adding become disabled or something.
I'll appreciate nay help on thisIs the new component hidden in the grouped objects, can you see it in the Objects browser?
You can drag a component out of a grouped object from within the object browser. Select the component and drag it up onto the grouped component name, it should then be outside of the grouping.
What version of Xcelsius are you using?
Regards
[Charles|http://www.reportex.co.uk/xc_waterfallchart.html] -
I was using the maps app in yosemite to look up an address, once I was able to verify the address, I wanted to add that address to an existing contact record in the contacts app. When I clicked on the option to add address to contacts, it unfortunately creates a new record with the address in it, however, the rest of the contact is blank.
My question is: is there a way to prompt the user (me), to select whether they want to create a new contact or add it to an existing contact?
Thanks in advance for your help!
Regards,
PeterI was using the maps app in yosemite to look up an address, once I was able to verify the address, I wanted to add that address to an existing contact record in the contacts app. When I clicked on the option to add address to contacts, it unfortunately creates a new record with the address in it, however, the rest of the contact is blank.
My question is: is there a way to prompt the user (me), to select whether they want to create a new contact or add it to an existing contact?
Thanks in advance for your help!
Regards,
Peter -
How to add blank page to existing Document In Adobe Dc
how to add blank page to existing Document In Adobe Dc Pro
Hi thashrifs16749461,
You can add a blank page using Adobe Acrobat DC by following the below instructions :-
1) Open your existing pdf document in Acrobat DC.
2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
*Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
In case if you experience any issue or have any query please let us know. We will be happy to help you.
Regards,
Aadesh -
Error while Installing the Java Add-In for an Existing ABAP System
Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran ChebroluHi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag -
Add value field to existing/ productive operating concern
Dear All,
I need to create a new value field and add it to an existing operating concern, which is already in use (there is already transaction data in the live system).
In my opinion I have to do the following steps:
1. Create new value field (KEA6).
2. Add value field to operating concern (KEA0).
3. Activate operating concern (KEA0).
4. Transport operating concern (KE3I).
Is that strategy ok?
Is it ok, to transport an operating concern, when the system is already "live" and there is transaction data in the system?
Thanks for your answers,
Regards,
MichaelHi,
first create new value field in KEA6. then take those new Value field in your operating concern Data Structure in t-code KEA0. Then generate the operating Concern.
Regards,
Sreekanth -
Installing Java Add-In for an existing ABAP System -Error SQL compatibility
Hello gurus,
We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ERP 6.0 SR3" (ABAP+JAVA). So, I want to install the JAVA instance which is the Java Add-In for an existing ABAP system!
So what I did was followed that instructions on that section in guide!
As you certainly know this process has three sequential phases:
1) Central Services Instance (SCS) Java Add-In
2) Database Instance Java Add-In
3) Central Instance Java Add-In
The first phase - Central Services Instance (SCS) Java Add-In - it already finished with success, but I´m faccing with a weird error in second phase Database Instance Java Add-In when I entered all required input parameters, SAPinst shows an error that says:
The database PRD has the wrong compatibility level. The database used for the installation of an SAP system must have compatibility level: 80 for MS SQL Server 2000 90 for MS SQL Server 2005 SOLUTION: See the MS SQL Server documentation on how to set the compatibility level for a database.
I don´t know what´s happen, in fact my database is an SQL Server 2008 (100), but I already change it at management studio, the compatibility level to MS SQL Server 2005, but still the error remains!!! I also tried to ran again the sapinst process, I restarted it but it still show me this error!!
Can you tell me why and how can I solve this problem?
Best regards,
João Dimas - PortugalHello Sunny,
I still have this error... I don´t know what do to more for this situation!
I found one not which report this error of compatibility - Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2) - in chapter "VII TROUBLESHOOTING" which said to follow the instructions in chapter III - "Installing SAP systems based on SAP NetWeaver 7.0 SR3".
When I read this last chapter (III) it tell us to do:
If you want to install an SAP system based on SAP NetWeaver 7.0 SR3 on SQL Server 2008, you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace. Instead, you have to do the following:
Patch your runtime libraries by applying the procedure that is described in note 684106 for your release and machine architecture.
Use a modified Installation Master DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Installation Master DVD".
Use a modified Kernel DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Kernel DVD".
I did everything that is said in the note (except the "Creating a modified Kernel DVD") because I can not access to the note 1480785 (it say: "The requested SAP Note is either in reworking or is released internally only")
Can you help me... can you guide me... please!?
Best regards,
João Dimas - Portugal -
Installing the Java Add-In for an existing abap system
Hi, Currently we are Installing the Java Add-In for an existing abap system.
Following the steps (Installation guide):
1) We sucessfully installed the Central Services Instance (SCS)
2) We sucessfully Installed the Database Instamce Java Add-In
Our problem comes in the third step
3) Central Instance Java Add-In
When the system prompts me the SAP System Identification (Select the central instance of your local host).
I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
(The same value)
I chose anyone, and click next.
The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
Any help is appreciated, and I will reward points if helpful.
RegardsI followed an advice made for a sap consultant, and delete some profile files.
I had the following files
DEFAULT.1.PFL
DEFAULT.2.PFL
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_DVEMGS00_bsomtymx005.BAK
DEV_SCS01_bsomtymx005
START_DVEBMGS00_BSOMTYMX0
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
after to delete the files, I have the following files
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_SCS01_bsomtymx005
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
Then, I restarted the installation, and the sapinst allow me to continue with the installation.
I really do not know if the installation will be sucessful, but this issue is solved.
Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution. -
How to add one column in existing search help.
Hi Folks,
My quesion is
How to add one column in existing search help and also Now search help on that field is not an explicit search help. It should be implement using check table.
ShivamHi,
If you want to add a field in Elementary search help, get the search help name for the and go to change mode and add the field in it.
If you want to add a field in collective search help, go to included search helps tab and a new search help name and add the fields to it.
I think this should help you to certain extent.
Regards,
Kranthi
Edited by: Kranthi on Jan 14, 2010 11:15 AM -
Can't add web page to existing document
I am new to Acrobat 9 Pro (running on Win7). I love the feature where you can convert a web page to pdf and then add a wab page to an existing document. My probelm is that I saved one page as a pdf then went to a different link on that website that appears very similar and tried to add that page to the first one. As many times as I tried, my second page will not appear.
I did try going to an entirely different website and adding a page to the very same document and I was successful.
Is it possible that the program won't add the similar page because it is recognizing the page to be the same? Is there a setting to override this? I need to be able to save multiple web pages that appear the same way to one document quickly and easily.Thank you for your response. It is possible to do this but I need the 'Add web page to existing doc' feature to work for me. I will be converting a large number of similar pages to pdf and this feature would be perfect if it worked as it is intended. Going back later to insert pages is counter-productive for me.
-
Add Lync 2010 To Existing Office 2010 ProPlus Deployments?
Office 2010 ProPlus was deployed with Word, Excel PowerPoint and Outlook 2 years ago. We are now going to deploy Lync 2010 and need an easy way to add Lync to the existing Office installations. On new installations we will add Lync as part of
the build image.
We do not have SCCM. Is there a user-friendly way to deploy the msp update file to existing Office installations that lack Lync that does not require SCCM? I have thought of making some kind of startup script, but I don't think it will be a good
idea for that installation script to run at every reboot. We only want it to run until Lync is installed and not again.
Also, some users have already installed a stand alone version of Lync 2010 on their systems that is not part of the Office Suite. Will we need to remove that version before the version in the Office suite can be added or does the stand alone Lync installer
actually use and install the same files from the Office suite?From memory, Lync2010, although it is an included benefit/entitlement within OFF2010ProPlus, doesn't install as part of the main suite setup.exe, there's a separate setup.exe/installer for Lync2010 ?
So, it shouldn't just be an MSPfile applied to modify ProPlus, you'll need to run the installer for Lync anyway?
You might want to create an MSPfile for the Lync installation, to get the desired installation experience+customisation.
Regardless, you should probably have a "wrapper" script, and in the script, do some kind of detection for Lync=present (maybe check the uninstall regkeys or check for presence of the exe under programfiles).
if found, then skip the installation step.
if absent, perform the installation step.
similar to this:
http://technet.microsoft.com/en-us/library/ff602181(v=office.14).aspx
There is also a separate Lync installer, for customers who don't have OfficeProPlus, and you may need to detect for that, and decide accordingly.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
LDAP: Recommended way to add new objectclass to existing entries?
Can anyone help me with the preferred way to add a new objectclass (with attrributes) to existing entries within a directory (via the javax.naming API)?
I have an application that uses a directory of users. Each user has objectclasses "top", "person", and "inetOrgPerson" with usual attributes.
The application needs to change to add a custom objectclass, say "ourAppClass" (and its attributes), to each existing entry within the directory. I have already successfully defined the schema for the objectclass within the directory.
I cannot find examples showing how to add an objectclass to existing entries. Creating brand new entries with custom objectclassess is straightforward.
When using DirContext.modifyAttributes must I define all the objectclasses again, or is there a way to send only the new objectclass and its attributes only?
Attributes attrs = new BasicAttributes();
Attribute classes = new BasicAttribute("objectclass");
classes.add("top"); // do I need these?
classes.add("person"); // do I need these?
classes.add("inetOrgPerson"); // do I need these?
classes.add("ourAppClass"); // in-house class
attrs.put(classes);
attrs.put("ourCustAtribute", "value1"); //
DirContext.modifyAttributes(dn, LdapContext.REPLACE_ATTRIBUTE, attrs);Does someone have a good example to follow?I think I have answered my own question. I think I need to use a ModificationItem to add an attribute to the objectclass.
final ModificationItem[] classModification= new ModificationItem[1];
classModification[0] = new ModificationItem(DirContext.ADD_ATTRIBUTE,
new BasicAttribute("objectclass", "ourAppClass"));
dirContext.modifyAttributes(dn, classModification); -
HT204088 can you use a pay pal account to add credit to an existing iTunes account
can you use a pay pal account to add credit to an existing iTunes account?
Yes, I've done it myself.
See the I do not have an iTunes Store account section of the How to redeem an iTunes Gift Card on a computer section of the following document:
iTunes Store: How to redeem a code -
How does one add tables to an existing universe using COM designer SDK.
Morning All
How does one add tables to an existing universe using COM designer SDK. I have tried:
objUniverse.Tables.Add (strTable_Name)
but get "Cannot create Table" error.
Any ideas?
Thanks in advance.
AnitaHi Anita,
-Use the Add method to add classes and objects to an existing universe using a VB 6 application.
Adding a Class
Definition: Function Add(Name As String) As Class
Syntax: NameOfClassesVariable.Add
Adding an Object Instance
Definition: Function Add(Name As String, [ClassName As String]) As Object
Syntax: NameOfObjectsVariable.Add(name, [class])
- name is the name of the object.
- class is the name of the class containing the object. This parameter should be used in cases where more than one objects exist with the same name.
Sample Visual Basic 6 Code
Dim DesApp As Designer.Application
'MODIFY AND EXPORT CLASSES AND OBJECTS OF AN EXISTING UNIVERSE
Sub modify_and_export_universe()
Dim DesUnv As Designer.Universe
Dim DesCls As Designer.Class
Dim DesObj As Designer.Object
Dim DesDBCol As Designer.DBColumn
Dim DBColName As String
Set DesApp = New Designer.Application
'Login to designer
Call DesApp.LogonDialog
'Make sure to log on with your administrator profile
'e.g : "hostname","username", "password","Enterprise"
'Make Designer application visible
DesApp.Visible = True
'This line disable warning messages from Designer
DesApp.Interactive = False
'to Open locally the universe you want to modify
'Set DesUnv = DesApp.Universes.Open("club_uni")
'Use OpenFromEnterprise method (Universes Class) to import a universe from the repository and opens it
Set DesUnv = DesApp.Universes.OpenFromEnterprise("Universes", "club_uni", False)
'Add a valid connection which already exists
DesUnv.Connection = "club"
'open the universe
'Call DesApp.Universes.Open("club_universe")
'Add the table Account and refresh the view in the main window
Set DesTab = DesUnv.DBTables.Item("Customer").Insert
DesUnv.ArrangeTables
'Add a class
Set DesCls = DesUnv.Classes.Add("Class MyCustomer")
'Looping through all the fields of the DB Table Account
For Each DesDBCol In DesUnv.DBTables.Item("Customer").DBColumns
'Store name of the column
DBColName = DesDBCol.Name
'Add an object to the class
Set DesObj = DesCls.Objects.Add("Obj " & DBColName)
'Affect a field to the object
DesObj.Select = "Customer" & "." & DBColName
Next
'Save the existing universe with the same name club_uni or you can change
DesUnv.SaveAs "club_uni"
MsgBox "Universe created and saved Class MyCustomer has been added!!"
'Close the universe
UnvFullName = DesUnv.FullName
MsgBox "The UniverseFilePath is " & UnvFullName
'Close the universe
DesUnv.Close
'This line disable warning messages from Designer
DesApp.Interactive = False
'Export the universe to the CMS DB (to the last universe folder)
'Make sure you save the universe before exporting it
Call DesApp.Universes.Export("Universes", UnvFullName)
MsgBox "This document has been exported successfully !!"
'Close designer
DesApp.Quit
Set DesApp = Nothing
End Sub
Hope this helps.
Regards,
Deepti Bajpai
Maybe you are looking for
-
Hi Frinds.. I am Creating Program Sales Order Uplaod Progrm using BAPI BAPI_SALESORDER_CREATEFROMDAT2. All header and Po data uploaded Properly . But Item Leal data not updated.. Please let me know any Conditions need to pass to update item data. CAL
-
Hi Gurus, I am getting a short dump when i am trying to load the data from datasources: 2lis_02_scl and 2lis_02_itm. It is giving the error message : " "MESSAGE_TYPE_X" C "SAPLRSC2" or "LRSC2U01" "RSC2_QOUT_READ_DATA" and even the repeat of
-
Setting up router for port forwarding - WRT54G
Hi all. I'm trying to set up my WRT54G wireless router so.i can port forward the relevant ports for my programs. I understand that you have to set up a static ip address before you can do a port forward which makes sense as you do not want to keep ch
-
I have tried SEVERAL times to customize the "Navigation Tool Bar" by adding the print ICON. Every time I do this it works until I close the browser then I have to re-add the ICON the next time I open the browser. How do I make the ICON stay from sess
-
hi how to retrieve datetime with result; if i use rs.getDate("CREATE_DATE") i am getting numberformat exception?i am using oracle database? i want in this format 12-Jul-2003 14:20 format??? can anybody give me code SELECT TO_CHAR(CREATE_DATE, 'DD-MON