Add default value to the Header Text of the Quotation
Hi All,
I want to add the default value to the header text of the Quotation.
I've created the Text Type and Access Sequence usign the VOTXN,
but I want some default text shown on the header text when user click on the Text type.
for e.g.
"The reason", "Qty"....
I've check the routine of data transfer and also the User Exit MV45AFZB Userexit_MOVE_FIELD_TO_TVCOM_H...still no solution.
Please help.
Terry
Please check below link.
http://www.sapfans.com/forums/viewtopic.php?f=5&t=324385
Similar Messages
-
How to add texts to the Header Text in the PO header
Hi
In our system, some already added remarks are appearing in the PO header text field when i open a PO. I wanted to edit the remarks appearing in the PO header as a default. I wanted to know where these predefined texts are filled in. Appriciate if you can help me findout the same.
Thanks
Venkat.Hi
In the above said configuraiton path, they have mentioned "Purchase order" in the source object and the "Header Text" in the source text.
But i wanted to konw where the below mentioned genereic Notes/Remarks will be entered. For all the purchase orders, this text is autmatically get copied into the header text. i wanted to know from where it is originating and where we are maintaining.
"Notes / Remarks :
Vendor's signature on the attached PO terms and conditions is an integral part of this PO
All documents should have a PO number
Invoices should be submitted to the attention of the Finance department
Please attach a PO copy with all claims to avoid delay in receiving payment.?" -
Header Text Of The PR to PO creation: Header Copy Rule
Hi Friends,
Is there any workaround to set copy rule at header note of PR . As standard sap, there is no header text rule available; may be multiple PRs can be converted into single PO. But I still needed this functionality as there would be only PR has to be converted into single PO.
Which bapi / exit can be used for this functionality . I need to reflect the header text of the PR into PO Header auto.
Regards,
LalithI,
There is no user exist available to get header text in the PO as per my knowledge.I had similiar kind of requirement ,at that time I dird the research for the same.
Regards,
Nitin Amritkar -
How to read header texts in the on save user exit of VA01
Hi Experts,
I have a requirement to read the header texts in the on save user exit.
I have to check whether departmental code in header text is not initial or not.
Can any one please pour in some points of how it can be done......
Thanks in Advance.
PremHi
U can use fm READ_TEXT:
DATA: THEAD LIKE THEAD,
TLINES LIKE STANDARD TABLE OF TLINE WITH HEADER LINE.
THEAD-TDID = <text id>.
THEAD-TDSPRAD = <language>.
THEAD-TDOBJECT = 'VBBK'.
THEAD-TDNAME = VBAK-VBELN.
CALL FUNCTION 'READ_TEXT'
EXPORTING
ID = THEAD-TDID
LANGUAGE = THEAD-TDSPRAD
NAME = THEAD-TDNAME
OBJECT = THEAD-TDOBJECT
TABLES
LINES = TLINES
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
U can use it in all situations ( inserting and updating) because that fm returns the buffered text.
Max -
Update the z table from the header text of VF01 on save
Hi All,
I have a Z table 'ZEXIM_LICDETAILS'. Whenever a billing doc. of type 'ZEXP' is created with tcode VF01, the Z table fields should also be updated. I have learned that we cannot include tabs in Billing Doc, so the licence number is put in the header text of the VF01.
Is there any way that I can update my Z table from header text, when we save the VF01.
Waiting for your repy in anticipation.
Thanks a lot in advance,
AnuWrite code in USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
Reddy -
The header text in sales order are coming on DE (and has to be PT)
Hi SDN Team members,
I have a strange issue. In the sale s order header the text by default it is coming as DE(German language) but it should be PT portugal language. This situation is in production system. The SAP log on language is PT.
I have replicated the same scenario in Relica of Production as well as test system where i am getting by default language is Portugal. Even i have tried to log on in to PT language where i am not getting the above problem where sales order shows the header text as default PT.
I have checked the sold to party - where the language is maintained as PT, Also in Sales organization and in company code level where the language is maintained in PT.
I have checked the OSS Notes also 442976 and Note 451147 and also the report - RVTEXTE..
This problem comes for almost all the sales users of the portugal.
Can you please help me to resolve this problem.
Looking forward for your favorable reply.
Thanks and Regards,
JanaHi SDN team,
I have solved this request. By running the Program - RVTEXTE and inputing the selection parameters as per out business requirement and the problem has been resolved.
Team - Thanks for all your valuable inputs.
Regards,
Jana -
Table in which if I put the delivery number ..I should get the HEADER TEXT
Dear Members,
I am checking for a table in which if I put the delivery number ..I should get the HEADER TEXT. Does such table exists or a Z report shoudl be created for this kind of setup.
Regards,Hi,
There are two Tables in which the texts will be stored
One is STXH -
TEXT HEADER
other STXL------- TEXT ITEM
If you want to get the Header text then input the values in the table
In STXH
TEXT OBJECT is VBBK
TEXT NAME is DELIVERY NUMBER
TEXT ID is ZS01 ( this is the standard ID for the Header note 1 )
Now goto SE37 and give the Function Module READ_TEXT and maintain all the above details and get the TDLINE Which contains the TEXT of the Delivery
regards,
santosh -
Reagarding the header text table
Hello Experts,
I am using BAPI_PR_CREATE bapi for creating a PR my problem is as follows i am getting the header text in a string format and i need to build the table from string for the paramater PRHEADERTEXT LIKE BAPIMEREQHEADTEXT for bapi
can i get a function module for this and
another Question is that i want to add a long text at header level just like we add at line itemi am getting the header text in a string format and i need to build the table from string
I have a soln for this prob..
DATA: BEGIN OF TABLE OCCURS 10 ,
STR(100),
END OF TABLE.
DATA WA LIKE LINE OF TABLE.
CALL FUNCTION 'IQAPI_WORD_WRAP'
EXPORTING
TEXTLINE = 'sumit12sddadsadasd3456789'
* DELIMITER = ' '
OUTPUTLEN = 5 " this is the length of each peice
* IMPORTING
* OUT_LINE1 =
* OUT_LINE2 =
* OUT_LINE3 =
TABLES
OUT_LINES = TABLE
* EXCEPTIONS
* OUTPUTLEN_TOO_LARGE = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Sumit Nene -
Viewing the Header Text Verbiage in Multiple OA's
Hello,
I would like to run a "report" that gives me the verbiage in the Header Text of our OA's. At the present time I am reviewing them one-by-one. I've been told that I am looking for a structure rather than a transaction or table.
As this is a new concept for me, I apologize if I am not posing my inquiry to the incorrect forum.
Thank you.
Regards,
JudiI think you are a developer? then
My understanding is you need to check for spell check of your header text in various documents.
For that you need to write a custom program with selection input as document number ,then get the header text using fm READ_TEXT and then pass the value coming out fm into fm 'TERM_CHECK_SPELLING'
aRs -
How to get the header text of a PO
Hi,
Do you guys know which table stores the header text of a PO? i'm only getting RM06E which is a structure.
Thanks!Hi,
You need to use the Function Module 'READ_TEXT' for retrieving any text in the header texts.
For this FM, the mandatory export parameters will be
a) client b) ID c) language d) name e) object
here the parameter name will be your P.O.No and the object will be your P.O. table - 'EKKO'.
So on executing this FM, all the required texts are retrieved in the tables parameters. From this tables paramater, you can read the table and pass on the values to your required internal table for display purpose.
lakshminarayanan
Please mark all helpful answers for points. -
How to Print Sales header text at the end of last page of Main Window
Dear All,
I have a requirement to print Sales order header text at the end of Main of last page. I don't have footer window.When i use Bottom-End bottom.Only one line is printing.The header has 5 lines.
Request you to provide <b>code</b>to handle this situation. Your response is highly appreciated
Best Regards
PraveenHi,
If u r using standard layout set RVORDER01.
U can print that sales order header text in the following text element.
/E SUPPLEMENT_TEXT.
U can include ur text objects here.
Then it gets printed.
Regards,
Veda Kumar -
Error giving a default value to a date column in the attribute settings.
When im giving a default value to a date column in the attribute settings i get this error when im running my jsp page (bc4j web application):
Error Message: JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value: 31-dic-2099
How can i fix that?
Thank uThe default date format for oracle.sql.DATE which oracle.jbo.domain.Date extends is "YYYY-MM-DD"
-
To change the header text of Purchase order using BAPI
Hi,
I am using BAPI_PO_CHANGE to change the header text of PO. But it s not reflecting. Can anyone help me by providing solution for this.
<i><b>Points will be rewarded for the useful answers.</b></i>Hi,
I need to change the text using this BAPI alone. I am using this because i need to change many parameters of PO.
Can u please say me solution using BAPI_PO_CHANGE. I need to know what are all the parameters need to be passed to BAPI to change the text.
Thank you for replying. -
User exit/BADi to change the header text in MIRO transaction
Hi all,
I am searching user exit or badi to change the header text in MIRO transaction.
My requirement is, before post the invoice I need to populate the vendor name in Header text field(MIRO -> Details tab -> header text field ). I have tried all the user exits and BADi's related to MIRO. Doesn't work. If anybody knows please share.
Thanks,
PranavTry BADI INVOICE_UPDATE.
If you are in system version is ECC 6.0, you can find out a Enhancement SPOT (ES_SAPLMRMC) under Function module MRM_FINAL_CHECK, which can be used to perform this requirement
Hope this helps.
Thanks,
Balaji
Edited by: Balaji Ganapathiraman on Mar 14, 2008 4:43 PM -
User exit/BADi to populate the header text in MIRO transaction
Hi all,
I am searching user exit or badi to populate the header text in MIRO transaction.
My requirement is, before post the invoice I need to populate the some text in Header text field (MIRO -> Details tab -> header text field). I need to populate this field in the MM document as well as FI document (Accounting Document). I have tried all the user exits and BADi's related to MIRO/MRRL. Doesn't work. If anybody knows please share.
Thanks,
Santosh
Edited by: Santosh Ghonasgi on May 13, 2010 4:48 PMHello santosh,
I am not sure whether a suitable exit / BADI exists to update the header text in MIRO directly.
there is one related forum:
User exit/BADi to change the header text in MIRO transaction
Hope, it may helpful for you to proceed with some other parallel solution.
Regards,
Selva K.
Edited by: Selvakumar Krishnan on May 13, 2010 5:29 PM
Maybe you are looking for
-
How to print from a remote printer.
I have a HP computer in my office running windows XP connected by a cable to a Linksys router, also in the office is an HP all-in-one printer connected wirelessly to the router. In the living room 50 feet away, I have another HP computer, connected
-
IBook G4 - Upgrade or Buy New System
I need help making a decision: is it reasonable to upgrade my iBook G4 (RAM, operating system) (+bigger hard drive?); or do I need to abandon it and buy a newer system? My considerations are: 1) DC-inboard is probably flaky. Even with a new power sup
-
Issues with ITunes on Lion Mac OS X 10.7
I succesfully upgraded to Lion and everything seemed to be fine until I started trying each of the programs. I had previously upgraded to Ilife '11 (unless I did something wrong) but I can't get IPhoto to open, though my photos can be seen if I set
-
Conversion error in checkboxgroup component.....
hi i have a checkboxgroup component. first time when i go this particular page no validation error occurs. but when i go to a different page and return back conversion error occurs in that component. getSubmittedValue() method for that component retu
-
5.0.2 some continuing issues
Greetings, I have the most current updates installed in Master Collection. Premiere Pro is a fresh install after previous update issues trashed my install. So it's clean OS as well. 1-I calculated renders, and when I closed the project and came back: