Add Device issue with Bluetooth!

Hi,
Earlier, my laptop could not detect any Bluetooth device, however; reading a post on MS community on the subject, I uninstalled all the devices under Bluetooth as shown in the Device Manager. After restart my Bluetooth could detect my devices and add the
necessary drivers.
However; I am facing this rather differing behavior on Windows 8.1 Pro. If I try using Add Device option in PCand Devices section of Services Application, it does not detect any device - however; the same devices get detected if I go to Control Panel->Devices
and Printers->Add Device OR Settings->PC and devices-> Bluetooth
Logically, I presume Bluetooth devices should also get added under Settings->PC and devices->Devices->Add Device - but it does not.
Is this some kind of driver issue? Can someone help why this is happening.
Let me also state that Under the Device manager there are 2 drivers under Others section namely MS-ABTP and MS-TCC that show a little question mark. Property for MS Enumerator under Bluetooth shows use of these drivers.
Are the above issues linked if independent how do I resolve them?
Thanks,
Sachin

Hi K Sachin,
What is your current situation?
Have you tried the solution as Nakii mentioned?
Please provide a shortcut about device manager for better analyzation.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

Add device failed with ERROR_INVALID_PASSWORD

Using SGD 4.5 and Windows 2008 R2. Getting this: Add device failed with ERROR_INVALID_PASSWORD when I run ttatdm.
I've made security changes that were suggested in the documentation for 2003 but that didn't help.
Anyone have any suggestions on what needs to be changed to allow Client Drive mapping on 2008 R2?

We don't have any issue using SGD 4.5 with CDM and 2008 R2. Most likely you do have a firewall issue between SGD and your Remote Desktop Server. Please also add ICMP access (PING).
Did you check your DNS? Forward and reverse lookups?
Regards,
Arno Staal
Divider B.V.

I just switched from iphone 4s to LG G3. I'm having issues with bluetooth in my car, iphone would sync automatically but with G3 I have to manually connect to my car's bluetooth every time I turn it on - it won't sync automatically. Any fixes?

I just switched from iphone 4s to LG G3. I'm having issues with bluetooth in my car, iphone would sync automatically but with G3 I have to manually connect to my car's bluetooth every time I turn it on - it won't sync automatically. Any fixes?

You can turn on BT tethering but it disables Wifi so if I have to do that step every time I get in my car, I just as well manually connect on BT every time.

10.4.8 Issues with bluetooth headset

Hello!
I have always used a Logitech Bluetooth Headset with the SIP client XMeeting under OS X 10.4.5 without any issues. AfterI updated to 10.4.8, the headset only works when I switched on PRIOR to booting the Mac.
If I switch it on after booting the Mac, its LED blinks blue with a strange sequence (two short blinks every 2 seconds or so - a headset state that the user's guide does not even mention).
But even if I switch it on prior to booting the Mac, it will not really connect (i.e. get out of standby mode) when I start XMeeting, instead it will connect with a delay only when I start a call with XMeeting.
Does anyone else face issues with bluetooth headsets? Or has someone found a fix for that?
Thanks,
Erik

Issue resolved with patches to 10.4.8 and follow-on versions.

Beats Wireless having Bluetooth Peripheral Device issue with Pavilion dv7

Ok I got a new pair of headsets for my Pavilion and it connects wireless with bluetooth. I got them to be able to connect just fine, but an issue comes across of not having sound in the headset. And I attempt a troubleshoot and it cannot fix the the problem. And when in tried to troubleshoot again the driver that is needed multipled... Not long ago I had the sound card crash and the motherboard was replaced. And with the Bluetooth Peripheral Device, it says that there is not a driver for it can I get or find one?

Hi Haku3509,
If you go here and enter your information, you should be able to reach your drivers. If you reply with your product number, I'll send the specific link to you.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Issue with Bluetooth

Hello,
I try to connect a speaker in bluetooth. My phone find the device, on Devices list I have only one item: "OVC3860" paired. When I click on this device, a message appears: "Only one audio device can be connected at a time". But in Devices list I got only this device, could you help me with this issue please?

Hello wokberry and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing an issue with your Bluetooth.
Delete the pairing from your BlackBerry Q10 and reboot by pulling the battery.
After your device powers on, re-pair your device to the speakers. Are you now able to connect and use the speakers?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Droid 3 voice dialing issues with bluetooth

I just received my Motorola Droid 3 on Monday. I'm having issues using voice dialing with my Samsung WEP590 bluetooth headset. No trouble activating the voice dialing on the phone but it never dials the correct name. I did the voice training on the phone but it didn't help. Yes, English is my native language. Saying "call home" made the phone ask if I wanted to "email" someone. Very frustrating since I travel for my job and voice dialing over bluetooth is essential.
I tried to do voice dialing without bluetooth and had the same issue. Is anyone else having this issue? Is there a third party app I can use?
thanks for any help.

Good Afternoon, dtownfb!
I researched bluetooth information about the device and the headset. I found no related concerns from other users. It would appear to be a hardware related issue on either the phone or headset. Have you been able to use another bluetooth with the device successfully? Have you tried the bluetooth paired with another phone and used the voice dialing feature successfully? We can eliminate the issue by asking these two questions. The problem lies in where we can duplicate the problem.
Please advise your findings. If it is deemed an issue with your Droid 3, please feel free to PM me so I can assist further with options to correct the issue.
Thank you and have a great day!

TS1569 iphone ios5.1 still having issues with Bluetooth

Iphone Ios5.1 still having issues on Bluetooth connectivity.

I lost The Bluetooth function completely two weeks ago. iPHONE IOS 5.1 .
This is not a pairing issue, or wrong usage. Suddenly it didn't work in my car any longer. Resetting didn't help. I have tested against two other iPhones, my PC, my headset and my iPAD. (all this units have had BT connections with my iPHONE earlier)
My iPhone Bluerooth is simply not working anylonger, not detectable and cannot "see" or find any other BT devices.
Is this a software bug? Or simply a hardware error requiring physical repair?
Cheers Rolf

Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

Flex Table Add Row Issue with Dynamic Entry Lists

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

Issues with Bluetooth/Wireless Mighty Mouse since Snow Leopard Install

Hi,
I am having issues with my bluetooth wireless mighty mouse. It was fine after initially having installed Snow Leopard. However, in the past week it has become progressively more and more unresponsive. It functions perfectly normal for the first while after startup, then after a short period of time it becomes slow to respond to the mouse movements that move the cursor. Eventually it gets to the point that moving the mouse results in no cursor movement whatsoever. It also becomes unresponsive to squeezing the side buttons. There are no issues with clicking or scrolling with the track ball.
I have searched the discussion forums to find issues that pertain to "bluetooth" and "wireless mighty mouse" and have tried the following suggested remedies... Repairing my Mouse with my Mac mini. Renaming my mouse. Deleting the com.apple.Bluetooth.plist file from Macintosh HD\Library\Preferences and restarting my Mac. Reset PRAM and NVRAM. Also tried to install Bluetooth Firmware update 2.0.1 but I get an indication that the update is not needed on my Mac mini. I have also checked for software updates but there are none...
I am going to attempt resetting the SMC but am doubtful that this will help...
Can anyone help... Please... ?
Thanks,
Des

I had read in another forum where someone had an understanding that the bluetooth problem had something to do with Airport/Time Capsule. I had also read about how someone was having an issue with being unable to turn off airport. (I had this same problem.)
Upon deleting a few airport related plist files (see below url) I was able to turn off/on airport AND my Mouse issue has no longer appeared... everything is working a-ok now.
http://discussions.apple.com/thread.jspa?messageID=10125976&#10125976

Am I the only one (still...) having issues with Bluetooth after upgrading to iOS 8.1...?

Hi fellas,
I guess my expectation level was way too high regarding this upgrade from iOS 8.0.2 to 8.1: my iPhone 6 still can't connect to Bluetooth peripherals, whatever they may be...
I have a MacBook Pro running Snow Leopard, and a PC with Windows 8.1 update on it, and none of them can pair with the iPhone, no matter how hard I try.
Have you guys found workaround measures or (hopefully) solutions?
I swore today was my last day going to work with the crappy Apple-issue headphones that came with the phone, and I'd pack my faithful Sony Ericsson BT to work tomorrow...

Your english is very good! For Handoff/Continuity to work you need Bluetooth turned on on both devices and they need to be in range of each other -- but you do NOT go to the Bluetooth setting on either device and pair them. I know that is unusual and can think of no other case where that is done using Bluetooth, but that is how it works for Handoff & Continuity.
The following are the other things needed from Connect your iPhone, iPad, iPod touch, and Mac using Continuity
How to get started:
Sign in to the same iCloud account on all your devices.
Turn on Bluetooth on all the devices you want to use. Make sure your devices are near each other.
Connect all your devices to the same Wi-Fi network.
Turn off Handoff
To turn off Handoff on your iPhone, iPad, or iPod touch, go to Settings > General > Handoff & Suggested Apps, and turn off the setting.
On your Mac, go to System Preferences > General and deselect the option to allow Handoff.
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.

Is anyone having "recent" issues with bluetooth connectivity on iPhone 4?

I haven't been using headset for a couple of months, but it is fully charged and paired. I started using it again recently, and as close as the phone on left hip, and headset in right ear, it gets choppy, or drops out. It even disconnects when I lay on my couch. The phone is on my chest, headset in right ear. I turn my head to the right so only my head is between the two devices. Last I checked, I didnt have a metal plate in my head!
I have iOS 5.01. ProPlantronics Headset (for phone calls). And Philips SHB6100 (for music). I have noticed cutout on the Philips headset while at the gym as well.
Just an observation: I didn't have this problem prior to iOs5.0.1

Just got off chat with Apple help desk. "Hope" told me solution is to do a complete network reset. (settings/general/reset/reset network settings) That would reset all your wifi and bluetooth passwords and pairings.
I read that turning off wifi helped the Motorola S10-HD cutout issues. I tried this and it did eliminate it. And now I have turned wifit back on (but do not currently have a wifi connection active) and the issue has not returned. I will check later when connected to wifi if the issue returns.

Update causes issue with bluetooth

I just upgraded my S4 with the "update_SCH-I545_MI1_to_MJ7" patch and now bluetooth audio will not work properly. I have several bluetooth headphones and speakers and the issue affects all of them. I can connect and play one song if I start the song from the S4 and not through bluetooth controls. However after one song it stops working. I have to disconnect and reconnect to play a second song and then it breaks after that.
Obviously there is some bugs in this latest upgrade. Is this a known issue and if so when is a fix anticipated?

schreib1620, let's get rid of these bugs. Have you downloaded 3rd party applications to your device? Some application software can affect the performance of your device soon after a software update. I recommend that you uninstall any unwanted applcation, power your device off/on to soft reset it, and test the bluetooth feature again. Keep us posted.
Lasina_VZW
Follow us on Twitter @VZWSupport

Issues with Bluetooth Firmware Update 2.0?

I just installed the Bluetooth Firmware Update 2.0 as suggested by Software Update, Mac mini early 2009. On restart and login, the Bluetooth Firmware Update started immediately, and I have a beach ball / pinwheel cursor. No other program activity. Only menu bar items are Apple menu, Bluetooth Firmware Update, File, Edit, Window, and Spotlight.
Machine has been in this state for about 10 minutes (I wrote this on my /other/ Mac).
The Bluetooth keyboard (Apple wireless) /was/ used to login.
Anyone else having issues?
Thanks,
Loyd

did install .... did restart .... now screen is gray for almost 1 hour .... really upsetting my small window for patience with the great apple gang ... have to race around to find computer to search for why and find nothing so i'll do force restart and see if that helps ....
the bluetooth update said it could take some time and to have power plugged in but they could have told how long and built in an exit ramp in case of this kinda "you're outta bizniz fellow" mess
any help out there ? thanks

Add Device issue with Bluetooth!

Similar Messages

Maybe you are looking for