Add dynamic parameters for Year, From Week and To Week.

hi all,
my requirement is Add dynamic parameters for Year, From Week and To Week.
can any one help how to do this one plz....
in Answers..
advanced Thanks..

hi kansal,
These requirement for the BI Publisher reports,
1)Add dynamic parameter for year, From week and To week.
2) Year to default to Current Year.
that's what i have dude..
may be we need to assign the dynamic variables for year ..
Edited by: 932326 on Sep 4, 2012 7:16 AM

Similar Messages

Hi, I´m from Brazil and next week I´ll be in Usa, NY , where I bought my Iphone 4. I want to know if i could go to apple store in Ny and upgrade for iphone 4s unlocked? I know i have to pay more, but IS THERE that possibility?

Hi I´m from Brazil and next week I´ll be In NY , where i Bought my iphone 4. I want to know if I could go to apple store to exchange to iphone 4s W
I know I have to pay more for that , but is there that possibility?

You can buy an iphone 4s.
There is no trade in.

Add dynamic buttons to each report row and bind the row data to buttons specific to that row

I have a page with a form at the top and a report at the bottom which is tied to a table. I need to add a pair of buttons for each row of the table and add dynamic actions for these buttons. I need to submit the data corresponding to the row to a REST service and refresh the table/row. I know it is possible to add ajax call and refresh the table after the response is received. But I am not sure how I can dynamically include a pair of buttons on each row and have the access the data corresponding to the record when a particular button is clicked. I was not able to find such a feature using the help page. Can you please let me know if this is possible. Thanks in advance.
Below is the representation of how I need the page to look like.
Col 1
Col 2
Col 3
data 1
data 21
data 31
Button 1
Button 2
data 2
data 22
data 32
Button 1
Button 2
data 3
data 23
data 33
Button 1
Button 2
data 4
data 24
data 34
Button 1
Button 2
I should be able to access data 1, data21, data 31 from button 11 and button21 etc.

select data1,
          data2,
          data3,
          null button1,
          null button2,
          rowid r_id
from .....
If you edit the column for button1 and navigate to the Column Formatting region you can create your button here, several different ways. You will need to play around with how you prefer. See below:
<input class="button1" type="button" id="#R_ID#" value="label for the button" /> or <button id="#R_ID#">label for button</button> or you could use <a> and apply css of your theme.
You also create both buttons in a single column. From here you can reference any of the columns from your select by using the #COLUNMNAME# format (as I did with R_ID).
You will next need to something similar for all columns you want to be able to grab when you click the buttons. See below:
--- This would be for data1 column
<span id="D1-#R_ID#">#DATA1#</span>
You would do these for each column that you want access to when button clicked as mentioned above. You could bypass this step and use jquery to traverse the DOM using .closest() and .find() and give each column a distinct class. Is is your preference.
You would then create a dynamic action triggered when .button1 is clicked. Now that you have that object you can get the id of the triggering object which would be your r_id and from there you can access all your individual data points(all this done in a javascript in the dynamic action) and assign to hidden items on your page. The next step of that dynamic action you could execute pl/sql and pass those in page items.
Hope that all makes sense.
David
Message was edited by: DLittle
Just as a bit of clarification: the r_id column does not have to be rowid, but it does need to be unique for each row return. You could use your primary key or rownum. Whatever works for your scenario.

I've purchased 9 songs from iTunes and a week later I decided to factory reset my iMac. How do I get the songs back?

I've purchased 9 songs from iTunes and a week later I decided to factory reset my iMac. How do I get the songs back?

If for some reason you have failed to maintain a backup copy, not good, then you can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Support - Apple

How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

HT5787 i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?

i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?

It's not stolen ,that iphone came from canada to Egypt and me activeted it last night i got the acc from the owner
Thanks for Replay Mr

Heey, Im from Brazil and this week I'll go to the USA and I wanna know if the ipads 2 from apple store are unlocked??

Heey, Im from Brazil and this week I'll go to the USA and I wanna know if the ipads 2 from apple store are unlocked??

As long as you purchase the GSM (AT&T) version, not the Verizon version, it will not be carrier-locked.
Regards.

Correct MP3 parameters for minimize lossy-ness and file size

Hi folks,
Correct MP3 parameters for minimize lossy-ness so as to miminize file size.
I am given a voice recording file in 32k sample rate and bit depth = 16. On spectral frequency display I see that there is not much useful data beyond 3200Hz, which I can ignore.
If I change the sample rate to 11025, frequency range is about 5000Hz which adequately holds the valid range. Now my question is do I lose anything by downsampling the data? Does the downsampling alters some data in the 0-4000Hz range?
My second question is the default option while saving in .mp3 for a file with 11025 sample rate would be 32 Kbps, 11025 Hz. do I gain any quality by encoding to a higher say in 40Kbps or more? What is a best MP3 encoding option for voice only recordings.
Is MP3 more lossy than ACM/ADPCM?
Another off topic question-- Can I find a particular sound? Suppose I see a particular noise and selects that and take corrective measures now I would like to find out any other occurances of that type of noise in the whole file. I understand that exact match is not possible but can I search to find out somewhat similar sounds?
best wishes to you all,
Deeptish

If I change the sample rate to 11025, frequency range is about 5000Hz which adequately holds the valid range. Now my question is do I lose anything by downsampling the data? Does the downsampling alters some data in the 0-4000Hz range?
In theory, no. If you use a lousy resampling method you will achieve some intermodulation distortion, however Auditions sample rate conversion process is pretty on the dot.
Is MP3 more lossy than ACM/ADPCM?
Yes/No. MP3 and ADPCM (adaptive differential pulse-code modulation) are two vastly different technologies (incidently, the ACM simply stands for Audio Compression Manager, and simply means it's an ADPCM codec for Windows). ADPCM is based off PCM and works in the time-domain. It uses dynamic compression to reduce the dynamic range so the audio is able to be mapped to an 8-bit resolution without excessive quantization noise. Upon playback/decoding, the signal is expanded. The process is far from lossless, however, A-law and μ-law have been telecom stanards of ADPCM for carrying voice traffic for years.
My second question is the default option while saving in .mp3 for a file with 11025 sample rate would be 32 Kbps, 11025 Hz. do I gain any quality by encoding to a higher say in 40Kbps or more? What is a best MP3 encoding option for voice only recordings.
MP3 is an entirely different game. Unlike ADPCM which works on the signal in the time-domain...MP3 processes an stores it's audio in the frequency domain and using physcoacoustic models, removes information from the frequency domain to reduce the number of bits needed to store the audio. The frequency response of an MP3 is determined more by the bitrate than the samplerate. A MP3 that's about 55kbps VBR sampled at 22khz only has a frequency response of 7.5khz, however, that doesn't mean the audio less than 7.5 khz hasn't been modified. Physcoacoustics work over the entire signal, the higher frequencies are the first to go since physcoacoustics figure we'll miss them less...but it does remove audio from the signal in many other bands as well. Sample rate does play a role...some bitrates are not available for specific sampling rates; since a 64kbps file might have 8khz of bandwidth, it's deemeed "too much" for 11khz and is not a valid rate. A 128kbps mp3 using 44.1 and a 128kbps mp3 using 32khz will generally have about the same range of spectral response....save for newer encoders that can squeeze a couple of muddy khz in there. A 32kbps mp3, in practice, is acceptable for voice, there should be about 4khz of available bandwith, higher bitrates will naturally give you better quality.
Basically, either MP3 or ADPCM are lossy formats, they're just radically different implmentations of audio compression with thier own sets of advantages and disadvantages.

UWL - WF TASKS TS20000189 Change Trip - Dynamic parameters for WD ABAP Appl

Hi
I am struggeling to manage to solve a WF task in the UWL
The task is TS20000189 for changing a trip which has been returned for corrections from a manager.
When previewing th iView for "My trips" I am able to get the overview of all my trips, and when selecting a trip i can see which parameters I need to get in the UWL, but I am no able to do so
I need to have the following parameteres dynamically presented
SAP_FITV_ACTION=CHG
SAP_FITV_PERSNO=00010089
SAP_FITV_TRIPCMP=R
SAP_FITV_TRIPNO=0000000328
My entries in the UWL is as follows:
<ItemType name="uwl.task.webflow.TS20000189" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchIView" executionMode="default">
      <ItemTypeCriteria externalType="TS20000189" connector="WebFlowConnector"/>
<Properties>
            <Property name="iview" value="pcd:portal_content/erv/standard_roller/ansatt_selvbetjening/no.edb.erv.str.hr.ESS_USER/ansatt_selvbetjening/Reiseregninger_12/com.sap.pct.erp.ess.12.expenses"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
<Property name="WebDynproApplication" value="FITV_TRIP_FORM"/>
<Property name="WebDynproNamespace" value="sap"/>
<Property name="DynamicParameter" value="SAP_FITV_ACTION=CHG"/>
<Property name="SAP_FITV_TRIPCMP" value="R"/>
<Property name="SAP_FITV_TRIPNO" value="${item.TripNumber}"/>
<Property name="SAP_FITV_PERSNO" value="${item.EmployeeNumber}"/>-->
<Property name="display_order_priority" value="5"/>
</Properties>
          <Descriptions default=""/>
        </Action>
</Actions>
    </ItemType>
Any Ideas will be rewarded
Regards
Kay-Arne

Hi,
Have you found any solution for this?

How to use different parameters for two tables(chart and Table) in one report in SSRS?

Hi,
Here is my requirement, i have 7 parameters in my report(Site,Account,LOB,year,Month,WeekDay and Date_Filter),
and in my report i have one table and one Chart,
my requirement is the table in the report has to show the data for 6 parameters only i.e(Site,Account,LOB,year,Month and WeekDay).so the table has to consider only 6 parameters, and it has ignore the 7th parameter, table should not consider Date_Filter parameter.
And Chart has to consider all 7 parameters.
so, when we preview the report table has to show the data for only 6 parameters and chart has to show the data for all 7 parameters.
if there is a way to get this Please reply me ASAP, it is an urgent requirement.
Thanks in Advance,
Naveen

Hi Naveen,
Refer below link to create multiple datasets as suggested by Gnanadurai
http://technet.microsoft.com/en-us/library/ff714047(v=sql.105).aspx
Thanks
Swapna

Dynamic filename for stdout from cron

OL 5.6 x86-64
I'm looking for a way to dynamicly specify a filename for stdout from a cron job.
From a command line, this works fine:
/home/estevens/bin/x1 > /tmp/estevens_x1_log.`date +%F_%H%M%S`Producing the desired output:
estevens:dwdev$ ls -ltr /tmp/est*
-rw-rw-r-- 1 estevens estevens 96 Aug 13 10:23 /tmp/estevens_x1_log.2012-08-13_102356But when I put that in my crontab:
12 * * * 1 /home/estevens/bin/x1 > /tmp/estevens_x1_log.`date +%F_%H%M%S`I get this result
/bin/sh: -c: line 0: unexpected EOF while looking for matching ``'
/bin/sh: -c: line 1: syntax error: unexpected end of file(Result comes to me in an auto-generated email)

The % sign has a special meaning in cron. A % is used to denote a new line in a crontab entry. You will simply have to escape the % signs and it should work, for instance:
<pre>
12 * * * 1 /home/estevens/bin/x1 > /tmp/estevens_x1_log.`date +\%F_\%H\%M\%S`
</pre>

How to create Dynamic Parameters for between dates

Hi,
I have a requirement to create a crystal report with between dates using dynamic parameters.
I am getting data from 'BEx Query' where already filters were defined on Date field. So While I am creating a crystal report these filters are displaying under 'Parameter Fields' automatically as Static. When I execute the report I am getting these Date's as Dropdown box. But as per the 'help' in crystal reports, static values won't get updated if any changes were taken place in backend system.
I have created a Dynamic parameter 'StartDate', but the values are not getting populated in Dropdown box.
Please let me know how to achieve this requirement.
Thanks in advance.
cheers
dev

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly

How to Add error message for component from the baking bean

I am in the situation, I need to add the h:message message component for each component at the time I am looking for an easy process something like I have to add the error message at the bean side, here I am using component binding approach but I am not able to add child for input Text components at the bean side, actually my final target is to add the message for each component when ever they get error and I have to change the style also.....
So please anybody help me......

Thanks for the response but one more thing right now I can't add message tag for each component so that I can add message from the baking bean as per ur solution I tried like this
FacesMessage msg = new FacesMessage("Testing is going");
msg.setSeverity(FacesMessage.SEVERITY_ERROR);
FacesContext.getCurrentInstance().addMessage(tf_ADD1.getId(), msg);
it is working but it is showing on the top of the for even no problem but I need to change the component color based on the message but I am not able to achieve that so how can I do that from backing bean now I can't add tags for each component.
So please show me a way.

Dynamic Parameters in MS Analysis Services and BPC

Hello Experts !
I need to execute a BPC Package, but in Microsoft Analysis Services I'm not able to have dynamic parameters, so I have to do it manually every time, because of the following problem when I try to execute it in Source Editor on Analysis Services.
"Parameter cannot be extracted from the SQL Command. The provider might not help to parse parameter information from the commnand"
The source is Sybase OLEDB
Best Regards,
Rodrigo

Hi Rodrigo,
I'm not sure I understood your question.
I'm refering to this: "but in Microsoft Analysis Services I'm not able to have dynamic parameters"
What do you mean?
Are we speaking about tasks to process cube or partitions of SSAS(SQL Server Analysis Services)?
Are you speakinga about tasks from SSIS (Sql Server integration services?)
Into SSIS you can build tasks to accept parameters.
You can have also tasks into SSIS which can perform actions into SSAS.
MODIFYSCRIPT variable is used to send parameters to tasks.
If you will clarify your questions then I hope I will be able to provide more details.
Kind Regards
Sorin Radulescu

Dynamic parameters for robotic arm

I have designed a 4 axis robotic arm , I have already defined kinetic parameters for arm by specifying DH parameter but I am not able to specify dynamic parameters(motor inertia, cog,friction,inertia matrix). So plz help me with this.
regards
Ayush

What is wrong with dynamic <cfhttpparam...> tags. That
is why they exist.
<cfset foo = structNew()>
<cfset foo.joe = "aValue">
<cfset foo.bob = "bValue">
<cfhttp ...>
<cfloop collection="#foo#" item="bar">
<cfhttpparam name="#bar#" value="#foo[bar]#">
</cfloop>
</cfhttp>

Add dynamic parameters for Year, From Week and To Week.

Similar Messages

Maybe you are looking for