Add effects the last occurrence of a sound

Hello,
is there a way to add an effect the last occurrence of a sound? That is to say if I have lead synth playing and then at the point I want the sounds to finish I want echo effect. I can I add that some how the end of the lead or do I need to have a separate track just for that effect?
Thanks!

Have you worked through the "Exploring Logic Pro" manual? It introduces these things and gives you a tour through the basic functions so you know how to do the core stuff.
Each channel strip has sends (underneath the insert slots and above the I/O slots). If you send to Bus 1, and turn up the send knob next to the send you've just added, then place your delay plugin on the new aux channel strip that is created (which will have Bus 1 as it's input), now your audio is being send to the delay.
Then you automate the send knob just like you automate any other parameter in Logic. If you don't know what automation is, or how to do it, again, work through the small introductory Exploring Logic Pro manual to get the basic concepts.

Similar Messages

  • OBIEE - Find position of the last occurrence of a charcter within a string.

    Hi,
    I have a requirement in 11.1.1.6.9 to be locate the position of the last occurrence of a character within a string.
    i.e. Given the following, I would want to locate the last "/":
    This/is/an/exampleI would like to return a value of 11. Now, there could be any number of "/" so I can't always locate the nth one - it must be the last one.
    Anyone any ideas?
    Thanks,
    John

    Your requirement is not complete. just in case you want to extract the last part 'example' just use substring and replace to trim up to required part.
    You may have to go for the same for multiple times.
    ETL is the best to handle this than BI.
    BTW: Check this How to use locate function if multiple occurences of same character
    Edited by: Srini VEERAVALLI on May 10, 2013 10:25 AM
    Good that given link is helped you to solve it ;)
    Edited by: Srini VEERAVALLI on May 13, 2013 7:47 AM

  • How can I get the last occurrence of a repeated item in Numbers

    Hi everyone, I'm hoping this question has a straightforward answer.
    I have a simple 2-column table (Table 1). Column A is a list of names. Column B is a list of dates where those names have had appointments. (Most names in Column A are repeated because they have had multiple appointments).
    I'd like to create an automated table based Table 1 that lists each name from Column A only once, with the last appointment that each person has had.
    Any ideas, I'd be grateful.
    Thanks!

    Hi Paul,
    Late to the party, as I was called to dinner shortly after starting on a solution and wasn't able to get back to it for a few hours.
    This was worked out in Numbers '09 (v2.3), but the formulas should work as well in Numbers 3. The solution requires the data on the Data table to be entered (or sorted) in ascending order of dates. Dulicate dates, though not included in the example, should not create an issue.
    The added column (Name index—column C) may be hidden. It is needed to mark the first occurrence of each name, and required only if you want the name list in column A of the summary table (Most recent appointment) filled automatically.
    Formulas:
    Data::C2, and filled down to the end of column C: =IF(COUNTIF($A$2:A2,A)=1,MAX($C$1:C1)+1,"")
    COUNTIF($A$2:A2,A) counts the number of occurences of the name in the same row as the formula from row 2 of column A to the row containing the formula. IF that count is 1, the number of the row is placed in the cell, otherwise the cell receives a null string ( "" ).
    Most recent appointment table:
    A2, and filled down to end of column A:
    =IF(ROW()-1>MAX(Data :: C),"",OFFSET(Data :: $A$1,MATCH(ROW()-1,Data :: $C,0)-1,0))
    If the row number minus 1 is greater than the number of distinct names in the index column, a null string is placed in the cell. Otherwise, the OFFSET function uses MATCH to determine the row in which to find the next name (in order of first appearance) and places that name in its cell.
    B2 and filled down: =IF(LEN(A)>0,LOOKUP(A,Data :: $A,Data :: $B),"")
    IF here uses LEN() to determine if there is data (a name) in column A. If so, then LOOKUP looks up the name in column A of the Data table and returns the date from the same row of column B. If there's no data (name) in column A, IF places a null string in the cell.
    This formula takes advantage of the fact that LOOKUP searches from the bottom of the column, and returns the result from the first match it finds.
    Regards,
    Barry

  • Add to the last row, even if I add a row?

    I have a spreadsheet for my business with 3 rows: Credit, Debit, and Total.  I want the Total column of each row to take the total from the row above, subtract the debit and add the credit and give me the new number.  I currently do this with J7−H8+I8, but if I add a row in between what it becomes is J7-H9+I9 instead of changing to J8-H9+I9.  Is there another formula that will make this work or a mode I need to set?

    Hi Bret,
    I agree. Add Row Above or Add Row Below gives a blank row with no formula.
    Try this: a table with two Header Rows. Header Row 2 is there to hold the Start Total (Opening Balance which I set to zero as an example).
    Now every Body Row contains the same formula:
    Insert a new row and it is blank (no formula) as you found:
    Select D3 and Copy.
    Double click on the D label to select all Body Cells in D.
    Paste to fill the formula into all Body Cells of Column D.
    Enter your Credit and Debit into the new Row 5
    Please call back if that does not work for you.
    Regards,
    Ian.

  • Why have the headphones that come with the iPhone within the last year lost their sound quality?

    Doesn anybody know why all the replacement headphones and headphones that come standard with the iPhone and iPod lost their quality?  I broke my headphones I got with my iPhone two years ago and I went in to get a replacement pair.  All the ones (standard iPhone headphones) I tried have no bass anymore.  I let the store person hear the difference and he agreed.  A friend of mine bought an iTouch recently and I listened to the ones that came with his iTouch and they are just as bad (he doesn't know the difference because he never heard the older pairs).  Why has the quality dropped on the new issuing headphones? I am so disappointed because I was happy with the quality of sound coming from the original pair, but they are no longer making them...WHAT HAPPENED???  New manufacturer?  Or is this a way to get people to have to buy after-market products?

    Why would Apple care if you bought after-market headphones? They don't make them. Unless maybe the manufacturers of those headphones bribe Apple...

  • How to get the last different occurrence in a SCD table

    hey,
    i have a slowly changing dimension and i want to get the last different occurrence for each row.
    Sample Data
    the field LAST_VALUE is the one i'm looking for.
    ID     START_DATE     END_DATE     VALUE     LAST_VALUE
    1     01/01/2000     01/02/2000     X     null
    1     01/02/2000     01/03/2000     X     null
    1     01/03/2000     01/04/2000     Y     X
    1     01/04/2000     01/05/2000     Y     X
    1     01/05/2000     01/06/2000     X     Y
    1     01/06/2000     01/07/2000     X     Y
    1     01/07/2000     01/08/2000     Z     X
    1     01/08/2000     01/09/2000     Q     Z i want to try and do that without three sub selects.
    i've tried analytic functions but lag brings me the last occurrence which is not necessarily different.
    thanks.

    Something like this :
    SQL> with sample_data as (
      2    select 1 ID, to_date('01/01/2000','DD/MM/YYYY') START_DATE, to_date('01/02/2000','DD/MM/YYYY') END_DATE, 'X' VALUE from dual union all
      3    select 1, to_date('01/02/2000','DD/MM/YYYY'), to_date('01/03/2000','DD/MM/YYYY'), 'X' from dual union all
      4    select 1, to_date('01/03/2000','DD/MM/YYYY'), to_date('01/04/2000','DD/MM/YYYY'), 'Y' from dual union all
      5    select 1, to_date('01/04/2000','DD/MM/YYYY'), to_date('01/05/2000','DD/MM/YYYY'), 'Y' from dual union all
      6    select 1, to_date('01/05/2000','DD/MM/YYYY'), to_date('01/06/2000','DD/MM/YYYY'), 'X' from dual union all
      7    select 1, to_date('01/06/2000','DD/MM/YYYY'), to_date('01/07/2000','DD/MM/YYYY'), 'X' from dual union all
      8    select 1, to_date('01/07/2000','DD/MM/YYYY'), to_date('01/08/2000','DD/MM/YYYY'), 'Z' from dual union all
      9    select 1, to_date('01/08/2000','DD/MM/YYYY'), to_date('01/09/2000','DD/MM/YYYY'), 'Q' from dual
    10  )
    11  select v.id
    12       , v.start_date
    13       , v.end_date
    14       , v.value
    15       , last_value(case when value != prev_value then prev_value end ignore nulls)
    16               over(partition by id order by start_date) as "LAST_VALUE"
    17  from (
    18    select t.*
    19         , lag(value) over(partition by id order by start_date) as prev_value
    20    from sample_data t
    21  ) v
    22  ;
            ID START_DATE  END_DATE    VALUE LAST_VALUE
             1 01/01/2000  01/02/2000  X    
             1 01/02/2000  01/03/2000  X    
             1 01/03/2000  01/04/2000  Y     X
             1 01/04/2000  01/05/2000  Y     X
             1 01/05/2000  01/06/2000  X     Y
             1 01/06/2000  01/07/2000  X     Y
             1 01/07/2000  01/08/2000  Z     X
             1 01/08/2000  01/09/2000  Q     Z
    8 rows selected

  • When I add a title in iMovie, the last title disappears

    Using iMovie 10.0.5 on a Retina 15" running 10.9.5, I have added a series of titles (lyrics) over a music video. Now, suddenly, when I add the next one, the previous one I added disappears. It does allow me to add the new one, which is the sixth or seventh one in the video, each with only a few words. Then, when I add another, the last one disappears again. I am ripping out the last of my hair.
    All I have to do is drag the transition over the tracks area and the new one is gone. If I move on past the tracks area, dragging the new transition over the border, as it were, the previous one reappears.
    Is there a maximum number of titles that can be added over a video?
    Thanks.

    It just displays with a black background in the viewer unless you change it from the default.

  • Replace last occurrence of a word in string

    Hi,
    I need to replace a last occurrence of a word in string. Form example:
    'I like fruits and also like vegetables'  need to replace last occurrence of "like" which is just before vegetables and not the "like" before the fruits.

    One of the solution to use the last occurrence dynamically
    applicable to prior version of 11g
    SELECT REGEXP_REPLACE (str, 'like', 'hate', INSTR (str, 'like', -1))
      FROM (SELECT 'I like fruits and also like vegetables also like mango' str FROM DUAL)
    applicable to 11g
    SELECT REGEXP_REPLACE (str, 'like', 'hate', 1, REGEXP_COUNT (str, 'like'), 'i') data_col
      FROM (SELECT 'I like fruits and also like vegetables also like mango' str FROM DUAL)

  • I loose both sound tracks of the last chapter when burning a movie to a disc in iDVD

    I loose both sound tracks in the last chapter when I burn a project to a disc in iDVD. The sound tracks are there if I play the movie in iDVD before burning to disc, but as soon as I try turn burn to disc the original sound track & the sound track imported from iTunes disappears in the majority of the last chapter.
    I'am using the latest version of iMovie & IDVD.  The project in iDVD is listed as 96 minutes & 3.9GB & I'am using an LG single sided DVD 120 Min 4.7GB
    Any help will be appreciated.
    Mike          (Australia)

    Hi
    May be something here.
    No audio on DVD disc.
    Most common origin.
    1. Imported audio from iTunes.
    • In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
    • Use this in Your movie project
    2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
    Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
    (iM’08 & 09)
    3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
    large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
    Minuscular - - 176x144
    Mobile - - - - - 480x360
    Medium - - - - 640x480
    Large - - - - - - 720x540    960x540
    HD - - - - - - - - 1280x720
    4. Strange audio formats like .mp3, .avi etc.
    • Change them to .aiff. Use an audio editor like Audacity (free)
    5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
    Cheque Audio-Out resp. Audio-In
    6. Ed Hanna
    Had the same problem; some Googling around gave me a kludgy, but effective fix
    Downgrade Perian from recent versions back to version 1.0.
    That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
    7. GarageBand fix.
    In this set audio to 44.1 kHz (Klaus1 suggestion)
    (if this don’t work try 48 kHz - me guessing)
    Before burning the DVD.
    • Do a DiskImage (File menu and down)
    • Double click on the .img file
    • Test it with Apple DVD-player
    If it’s OK then make Your DVD.
    Burn at x1 speed.... (or x4)
    • In iDVD 08 - or - 09
    • Burn from DiskImage with Apple’s Disk Utilities application
    • OR burn with Roxio Toast™ if You got it
    Yours Bengt W

  • Can't update After Effect 13.0.0.214 to the last version (13.1)

    Hi,
    I can't update After Effect 13.0.0.214 to the last version (13.1)
    The Creative Cloud app notify AE as up to date :
    When I try Help / Updates inside AE : 
    If I look at the Help / Updates / preferences Help / Updates inside AE , I can see only these apps  :
    I can't add After Effect to this list...
    Any ideas ??
    Thanks,

    Rnmt have you removed and reinstalled the After Effects CC 2014?  Available updates are automatically applied during the installation process.  You can find more details regarding the uninstall and reinstall process at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Imac  have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back.  i tried everything that was suggested including puting in the start up disk.  The disk would not eject.  Some one

    Imac  have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back.  i tried everything that was suggested including puting in the start up disk.  The disk would not eject.  Some one suggested how to remove it and that did work.  Computer going to Apple hospital Tues. July 3,  thank you for all the suggestions.
    Phyllis33

    There is nothing wrong with the OS update.
    Delete ALL your email accounts.
    Restart Playbook
    Put the accounts back and ensure they are all set with PUSH ON.  Manual (push off) will burn battery.
    Similarly delete your wifi connections and add back when required. 
    Turn off wifi is not connected to wifi. 
    Any "hunting for connection" in email or wifi will burn up battery.

  • I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab.  How do i get these things to show up on my program?

    I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab.  How do i get these things to show up on my program?

    In GarageBand 10.0.2 you can no longer add all kinds of effects freely; this GarageBand '11 feature has been discontinued. Pick one of the predefined patches that already has the effects you want.
    However, you can add effects from the predefined audio units.
    You'll see the predefined effects on the track, when you open the Smart Controls. To add audio units, click the button and enlarge the the smart controls pane by dragging the dividing line to the Track Area upwards.

  • I have a G5 which I intend to keep.  Now that I have updated my iphone 4s to iOS 7.0.  I cannot add music to my iphone or upload photos to iphoto.  I have the last itunes 10.6.3. which was supported by apple.  itunes will not interact with my iphone on an

    I have a G5 which I intend to keep.
    Now that I have updated my iphone 4s to iOS 7.0.
    I cannot add music to my iphone or upload photos to iphoto.
    I have the last itunes 10.6.3. which was supported by apple.
    itunes will not interact with my iphone on any level.
    Apple made all the equipment I use.
    Bentley and Ferrari etc do not stop making parts for their cars?
    The least Apple could is.
    A. Update itunes to run on a G5
    Regarding iOS 7.0 you have totally lost the plot.
    We buy apple why?
    Quality.
    Intuitive interface.
    Stable software.
    Design.
    All that Steve Jobs consider sacrosanct.
    Quality is about ongoing support longevity of product.
    Its not about trying to sell to every person on the planet, others are way ahead of you.
    So try respective the customers you have, it wont be long before theirs a better operating system and your lead in hardware is marginal. 
    Regards
    Glyn Evans
    My post on facebook this morning.
    If you have an iPhone or iPad do not update to ISO 7 unless you want an operating system that looks like windows 8. The graphics looks like it was designed by a artistically challenged mongoose and the operating system is not intuitive something apple users expect. Overly complicated ugly and generally change for the sake of apples paranoia since the death of Steve Jobs.

    You need to update iTunes to 11.1 on your PC

  • So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

    So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
    I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
    I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
    Please help!

    You migh give resetting your NVRAM a try:
    http://support.apple.com/kb/ht1379

  • If I add a row to my spreadsheet, how do I get the footer cell to show the last amount in the table automatically?

    Balance Forward
    $0.00
    Date
    Code
    Check Number
    Transaction/Description
    Deposit
    Withdrawl
    Ending Balance
    I am able to set up the Ending Balance to show the value of the cell right above it as long as I dont need anymore rows. If I add a row the value of the ending balance is stuck on the row or rows above the newly addd ones. All of my other formulas contiune on when a row is added, Is there a formula that can be added so that when a row is added the ending balance value moves to the last cell in the row?

    Cobb425 wrote:
    Thank you badunit for your responses and help. Jerrolds formula worked for me a little bit better for what I was looking to do. Thank you again for your help
    Whatever works best for you. Jerry's formula assumed your table might not be totally full, that there might be empty rows at the bottom.  Mine assumed there were no empty rows; it gave the value of the cell directly above it, as you asked. With Jerry's formula, be sure you enter your data in order by date or keep it sorted that way to ensure you get the correct "Ending Balance".  If your last row does not have the most recent date, the formula will return the balance from a different row.
    I don't see the advantage in Jerry's "Balance Forward" formula over the simpler one I provided.

Maybe you are looking for