Add effects to video does not work
I have a motorola ROKR E6 I am able to use it as a webcam in ichat on my mac mini. But when I try to add effects to it iChat says connection problem. I tried this on photo booth as soon as I launch Photo Booth while ROKR is connected Photo Booth crashes. But if the ROKR in not connected it does not crash. Is this problem with my iChat or is the problem with ROKR E6?
Message was edited by: ameyasb
IS the Logitech camera in either of these two tables
http://www.ecamm.com/mac/iusbcam/configs.html
If so on the right does it say it needs a Mac Driver (macam or ioxperts or possibly branded from Logitech)
Or does it says it will work with the Mac OS after 10.4.9 ?
IF it needs a driver have you installed it ?
This will allow at least iMovie to see the camera.
This is because iMovie can see many formats of Video signal.
iChat can only see DV imput (or converted imput from certain USB cameras)
When the camera is a USB one it will fall into two categories.
1) the Newer UVC (USB Video Class ) Compliant cameras that the Mac OS 10.4.9 and above can use in all apps
2) those that are not USB Video Class compliant that need a driver.
The for iChat to see the second group you also need the iUSBCam utility as well as the Mac Driver.
Are you talking about the Logitech or the Mobil phone camera ?
4:47 PM Saturday; May 31, 2008
Similar Messages
-
Video does not work in iOS 8.3
I have the iPhone 6 128GB. I did update to iOS 8.3.
I have some problems after the update... video does not work, it wont play, i can click on the play button but nothing happens.
The problem ocurs in safari when i visit news sites and try to play video in articles.
When i get snapchat with video... it wont play, it is only black screen with the seconds counting down... and some times it just craches the snap app...
I cant watch videos in instagram or facebook...
I live in Norway and I think it is stupid that Apple still has not fixed the keyboard... the "123" key and the "globe" key swithc place with each other in portrait and landscape mode... why...!?! ( this is when i use Norwegian keyboard )
Yes i have rebooted the phone holding in both buttons until apple logo is visible 2 times
Yes i have rebooted the phone even more
Yes i have quitted the apps that was open and the only way i get the black screen away in snapchat is by killing the App...
Apple... i am not impressed.Here is the strangest thing, what works for you does not necessarily help other. I rebooted my phone several times, and yes, youtube finally worked, but only for some hours then it did not work. I did quit all Apps and rebooted with home and power button pressed inn until apple logo appeared and disappeared again, i had to press power to start the phone. I repeated this step. Now the videos where playing in all apps. The next morning i did get a snap on my iPhone, i tried to see it, but it was only black screen with text and a clock counted down to 0, but it stopped on 1... and the app froze.
I dubble clicked the home button, and there where 25 active apps, apps that i had not used for days and note... i manually quitted all apps the day before... how did this apps appear again ? The Apps that where terminated do appear again after reboot... i don't know why, i have still trouble to see video. I hope for a fix from Apple, because i have so much i don't want to loose in my phone. -
Video does not Work in iTunes Store please help! annoying problem!
The video does not work in the itunes store. I get no picture, only sound when i want to preview a music video or a movie trailer. No video at all. However, i can watch my movies and music videos that i already own. Please, is there any smart guy who knows a solution?
I'm having this same issue. I tried some things but still couldn't get it to work the way it used too.
It will not play the video portion in iTunes only the audio if I click on the song. If I switch the settings from Music Video to TV show in the info tab, the file plays fine. If I open it in Quicktime, the file plays fine.
I've tried changing the preferences so that the video will play in the iTunes window, in a separate window, etc. and all it plays is the audio and will show the artwork instead of playing the video. -
Zen Micro 5gb - Playlist on the fly with "add to selected" often does not work (AD HOC 'playlis
I've found ad-hoc playlist made from ADD TO SELECTED often does not work. Here are other issues:?. Does not add? at all OR only adds after first song selected played2. Cannot swith from ARTISTS to SONGS w/o killing list. This will kill the ongoing list.3. If I make mistake and hit the PLAY button, it wipes out the entire list I'd already made. Any of these issues resolved in Zen Vision M?
try reloading the firmware and if that doesnt work try opening the case and cleaning it if there is anything in there. the button may be stuck. and if that doesnt work i dont know what else to sugjest. it seemed to work for me.
-
I downloaded ios 7 today 09.19.2013 on my iphone 4 and ipad retina 3hrd generation 64g . The switch from photo to video on the camera app does not work neither on iphone nor on ipad. Is it a "youth"bug ?
Did you try swipe up and down to change?
-
Own two iphone 5s with ios 7.0.2 loaded. Both phones do not allow camera video to start. Anyone else with this issue? Any suggestions how to correct?
Hello markittwo,
Thank you for details about the issue you are experiencing with recording video after upgrading to iOS 7.
The first thing I recommend is quitting and relaunching the applications on your iPhones:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/HT5137
If you are still seeing the same issue after quitting and relaunching the Camera app, I recommend restarting your phones and then resetting if recording video still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhones:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Mini-dvi to video does not work
I have the 13-inch white macbook purchased in 2008. I just bought a mini-dvi to video cord and tried hooking it up to my TV using RCA and S-video and neither work. When I plug the cord into my computer, the resolution on my computer changes and then when I plug it into my TV it does not appear on the TV. When I change the display resolution on my computer to the lowest option, I can see the display from the computer on the TV rapidly moving across the screen and it is extremely distorted and doesn't appear to have any color. I chose detect displays and this did not do anything. Am I doing something wrong? Why won't my computer image display on the TV?
I also have the same issue. SVideo / RCA adapter purchased from Fry's Electronics. Apple Brand. Worked the week I bought it, and after a couple of updates, stopped being reliable.
Now, after some trial and error, I can get it to work, its just painfully convoluted.
The trick for my system is to keep trying it, (re-seating the adapter at the mini-dvi connection) and eventually it works.
Iv found that It only works when it "latches" to the video adapter instantly.
Sometimes its 3 times. Sometimes its 15. Quite random.
Seeing as how I don't like watching movies on a 13" screen. I just have to be patient.
I have been searching/waiting for some kind of apple firmware, or video adapter update that adresses this, as I dont believe its anything more than a software bug.
Any useful info would be much appreciated. -
FaceTime does not connect, iChat video does not work, Skype video does not work (LION)
Hi everyone,
I am using OS X 10.7.3 2011 Macbook Pro 2.2 Ghz Intel Core I7 8GG 1333MHz DDR3 RAM 500GB HD.
What happens when I try to call someone in FaceTime: Webcam light is on and I see myself on my screen. It rings and after a while it says "X is not available for FaceTime (or similar).
In iChat I can text chat, but video calls do not work. In Skype, I can do audio talking, but when I try to use my video, it fails to connect.
This seems to indicate to me that there is a system-wide, rather than user or program-specific problem, in which my system cannot connect to others when using my webcam.
Can anyone offer any guidance on this matter? I am pretty tech savvy. On my home network I have tried port forwarding/opening and all that, without luck. I am worried that maybe I could have made a mistake in terminal or something some time ago, but I don't go in there very often and it is usually for very specific things.
Any help would be greatly appreciated. I am moving away for four months, and I really need this to work so that I can chat with my lovely girlfriend. Please see the notes below prior to commenting.
Cheers
Notes:
Internet is working fine. I use three different network, one of which is wired and works fine.
I have tried to create new users, still no luck
Webcam works fine in PhotoBooth
I am logged into FaceTime properly (this is simple, right?)
Reinstalling OS X to fix this problem is not an option
I have tried FaceTime with several people with several devices (e.g., iPad, iMac, iPhone)
FaceTime on my iPhone works with other people on same networkPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I would like to know How to fix this problem with my mini Ipad, camera works well when I take photos but if I try to use for video the screen does not respond. it only response to photo, so I can I fix this ?
All iPads (except the first gen which doesn't have a camera) are capable of taking videos. What version of iOS do you have on your iPad ? With iOS 7 you slide the Video / Photo / Square options up/down so that the one that you want lines up with the yellow dot to their left - is that how you are trying to select Video ?
-
I've been trying to connect my macbook to an Insignia TV. The macbook recognizes the TV is connected and changes the display ratio accordingly, but it does so in a jittery way before landing on 1080i after some time.
The audio works fine on the TV from the mac, but it's not picking up any video. When I go to System Preferences>Displays, I get two windows: one for the built-in display, one for the TV. I think this is why I'm not getting any video, but I don't know how to make it just so that the display is for the TV. The displays are mirrored, but I'm still not getting anything. Please help!Go into System Preferences, then Displays. There should be an option to click on the tv mirroring. Click it and see if it connects to the TV.
-
Volume adjustment for videos DOES NOT WORK.
When you right-click->Get Info->Options on a VIDEO and change the Volume Adjustment slider, it has no effect. Works for music files, but not videos.
Is this a known bug/issue?The problem is that I want certain videos to play louder on my iPod. I can always turn my computer speakers up louder, but the volume on iPod only goes up so high...
-
I am running Final Cut pro 5. I am trying to send my time line to a mindv deck using print to video. I have a monitor hooked up to the deck to watch what is being recorded. I set my in and out points in the time line and and select print to video from the menu. I do not have any of the boxes checked, because i have black and color bars already in my time line. I select in/out and hit ok. The screen goes black and my video shows up in the middle playing, but nothing shows up on my monitor and when i watch the tape that i am recording to, there is nothing on there as well. The device control is working, because I can capture footage off of the deck, but it seems to not be getting a signal when I am trying to print to tape. I have also tried edit to tape, and I press record on the deck after setting up the sequence and then I play the sequence, and nothing is still recorded onto the tape. For both edit to tape and print to tape, everything is working, but nothing is being recorded onto the tape. I have also tried hooking up my sony camera to be used to record, but that doesn't work either. Any help would be great thanks!
G5 Mac OS X (10.3.9)Make sure the deck has it's input selection set to firewire for starters...
I'm not clear if this is part of the problem, but FCP 5.0.4 will run better in Tiger.
But if you can see external video, you should also be able to print to video or edit to tape... if you can't then keep troubleshooting your Firewire connection... got a different cable to try? Can you capture video OK?
Jerry -
Adobe After Effects Multiple instances does not working parallel using Scripting
Hi all,
i am uploading after effects template to my site, user came and upload his desired contents.
i update the template using scripting with user's contents and then render video so user get video with his uploaded text/images etc.
its working perfectly when i update a single template at a time but when multiple users come at the same time then they need multiple instances of after effects
so i open multiple instances of after effects by using "-m" with after effects shortcut
after looking at windows task manager there are both instances but the problem is
only once instance continue and the second one stop, after completion of first instance the second one still in pause status
i need 2,3 4 or whatever instances to work parallel without pause/stop
i am using windows server 2008 R2 with XAMP installedHi Lal XaDa,
Would you please post your script to help us to troubleshoot?
In addition, if you can use Windows Powershell, please try these ways:
If a script needs some speed-up, you might find background jobs helpful, you can use the cmdlet "start-job", for more detailed information, please go through this article:
Parallel Processing in PowerShell
You can also use the cmdlet ForEach -Parallel in powershell workflow to handle script in parallel.
For more detailed information, please check this article:
about_Foreach-Parallel
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang -
Mini (2009) and Mini-DVI to video (s-video) does not work?
Before I return the mini and adapter I just need to confirm what I've read in other threads.
The Mini-DVI to Video adapter is useless with the latest Mac mini's. And there is really no simple way to get s-video or composite video from the newest minis.
Is this correct?You need a converter, and not an adapter with 2009 Minis.
But I don't see why the solution in this thread is overly complicated:
http://discussions.apple.com/thread.jspa?messageID=10901575� -
Inserting flash video does not work completelty
Hello guys , i don't know how to give up with hard things but
this matter drived me mad and i have read and tried many things
without any result , locally and on the site when i publish it
> I am embedding a flv video into dreamweaver but nothing
it works i have
> tried
> manythings and i am tried pls help
> here is the codes
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
> <title>Untitled Document</title>
> <script type="text/javascript">
> function MM_CheckFlashVersion(reqVerStr,msg){
> with(navigator){
> var isIE = (appVersion.indexOf("MSIE") != -1 &&
> userAgent.indexOf("Opera") == -1);
> var isWin = (appVersion.toLowerCase().indexOf("win") !=
-1);
> if (!isIE || !isWin){
> var flashVer = -1;
> if (plugins && plugins.length > 0){
> var desc = plugins["Shockwave Flash"] ?
plugins["Shockwave
> Flash"].description : "";
> desc = plugins["Shockwave Flash 2.0"] ?
plugins["Shockwave Flash
> 2.0"].description : desc;
> if (desc == "") flashVer = -1;
> else{
> var descArr = desc.split(" ");
> var tempArrMajor = descArr[2].split(".");
> var verMajor = tempArrMajor[0];
> var tempArrMinor = (descArr[3] != "") ?
descArr[3].split("r") :
> descArr[4].split("r");
> var verMinor = (tempArrMinor[1] > 0) ?
tempArrMinor[1] : 0;
> flashVer = parseFloat(verMajor + "." + verMinor);
> }
> }
> // WebTV has Flash Player 4 or lower -- too low for
video
> else if (userAgent.toLowerCase().indexOf("webtv") != -1)
flashVer =
> 4.0;
>
> var verArr = reqVerStr.split(",");
> var reqVer = parseFloat(verArr[0] + "." + verArr[2]);
>
> if (flashVer < reqVer){
> if (confirm(msg))
> window.location =
> "
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveF
> lash";
> }
> }
> }
> }
> </script>
> <script src="../Scripts/AC_RunActiveContent.js"
> type="text/javascript"></script>
> </head>
>
> <body onload="MM_CheckFlashVersion('8,0,0,0','Content
on this page
> requires a
> newer version of Adobe Flash Player. Do you want to
download it now?');">
> <script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=8,0,0,0','width','338','height','377','id','FLVPlayer','src','FLVPlayer_
>
Progressive','flashvars','&MM_ComponentVersion=1&skinName=Halo_Skin_3&streamName
>
=/lovestory1&autoPlay=true&autoRewind=false','quality','high','scale','noscale',
> 'name','FLVPlayer','salign','lt','pluginspage','
http://www.adobe.com/shockwave/d
>
ownload/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','FLVPlayer_Progress
> ive' ); //end AC code
> </script>
> <noscript>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=8,0,0,0" width="338" height="377"
id="FLVPlayer">
> <param name="movie" value="FLVPlayer_Progressive.swf"
/>
> <param name="salign" value="lt" />
> <param name="quality" value="high" />
> <param name="scale" value="noscale" />
> <param name="FlashVars"
>
value="&MM_ComponentVersion=1&skinName=Halo_Skin_3&streamName=/lovestory1&autoPl
> ay=true&autoRewind=false" />
> <embed src="FLVPlayer_Progressive.swf"
>
flashvars="&MM_ComponentVersion=1&skinName=Halo_Skin_3&streamName=/lovestory1&au
> toPlay=true&autoRewind=false" quality="high"
scale="noscale" width="338"
> height="377" name="FLVPlayer" salign="LT"
> type="application/x-shockwave-flash"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" />
> </object>
> </noscript>
> </body>
> </html>
>
>
>
I am copying and pasting the codes so ignor the left ">"
Any help ? pls and thanksYou should know by now that the only real way to get help
with such things
is to post a link to the page. Can you please do that?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Design for best" <[email protected]> wrote
in message
news:[email protected]...
> Hello guys , i don't know how to give up with hard
things but this matter
> drived me mad and i have read and tried many things
without any result ,
> locally and on the site when i publish it
> > I am embedding a flv video into dreamweaver but
nothing it works i have
> > tried
> > manythings and i am tried pls help
> > here is the codes
> > <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> > "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> > <html xmlns="
http://www.w3.org/1999/xhtml">
> > <head>
> > <meta http-equiv="Content-Type"
content="text/html; charset=utf-8" />
> > <title>Untitled Document</title>
> > <script type="text/javascript">
> > function MM_CheckFlashVersion(reqVerStr,msg){
> > with(navigator){
> > var isIE = (appVersion.indexOf("MSIE") != -1
> > userAgent.indexOf("Opera") == -1);
> > var isWin =
(appVersion.toLowerCase().indexOf("win") != -1);
> > if (!isIE || !isWin){
> > var flashVer = -1;
> > if (plugins && plugins.length > 0){
> > var desc = plugins["Shockwave Flash"] ?
plugins["Shockwave
> > Flash"].description : "";
> > desc = plugins["Shockwave Flash 2.0"] ?
plugins["Shockwave Flash
> > 2.0"].description : desc;
> > if (desc == "") flashVer = -1;
> > else{
> > var descArr = desc.split(" ");
> > var tempArrMajor = descArr[2].split(".");
> > var verMajor = tempArrMajor[0];
> > var tempArrMinor = (descArr[3] != "") ?
descArr[3].split("r") :
> > descArr[4].split("r");
> > var verMinor = (tempArrMinor[1] > 0) ?
tempArrMinor[1] : 0;
> > flashVer = parseFloat(verMajor + "." + verMinor);
> > }
> > }
> > // WebTV has Flash Player 4 or lower -- too low for
video
> > else if (userAgent.toLowerCase().indexOf("webtv")
!= -1) flashVer =
> > 4.0;
> >
> > var verArr = reqVerStr.split(",");
> > var reqVer = parseFloat(verArr[0] + "." +
verArr[2]);
> >
> > if (flashVer < reqVer){
> > if (confirm(msg))
> > window.location =
> >
> "
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveF
> > lash";
> > }
> > }
> > }
> > }
> > </script>
> > <script src="../Scripts/AC_RunActiveContent.js"
> > type="text/javascript"></script>
> > </head>
> >
> > <body
onload="MM_CheckFlashVersion('8,0,0,0','Content on this page
> > requires a
> > newer version of Adobe Flash Player. Do you want to
download it
> > now?');">
> > <script type="text/javascript">
> > AC_FL_RunContent(
> >
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
> >
>
version=8,0,0,0','width','338','height','377','id','FLVPlayer','src','FLVPlayer_
> >
>
Progressive','flashvars','&MM_ComponentVersion=1&skinName=Halo_Skin_3&streamName
> >
>
=/lovestory1&autoPlay=true&autoRewind=false','quality','high','scale','noscale',
> >
> 'name','FLVPlayer','salign','lt','pluginspage','
http://www.adobe.com/shockwave/d
> >
>
ownload/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','FLVPlayer_Progress
> > ive' ); //end AC code
> > </script>
> > <noscript>
> > <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> >
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> > rsion=8,0,0,0" width="338" height="377"
id="FLVPlayer">
> > <param name="movie"
value="FLVPlayer_Progressive.swf" />
> > <param name="salign" value="lt" />
> > <param name="quality" value="high" />
> > <param name="scale" value="noscale" />
> > <param name="FlashVars"
> >
>
value="&MM_ComponentVersion=1&skinName=Halo_Skin_3&streamName=/lovestory1&autoPl
> > ay=true&autoRewind=false" />
> > <embed src="FLVPlayer_Progressive.swf"
> >
>
flashvars="&MM_ComponentVersion=1&skinName=Halo_Skin_3&streamName=/lovestory1&au
> > toPlay=true&autoRewind=false" quality="high"
scale="noscale" width="338"
> > height="377" name="FLVPlayer" salign="LT"
> > type="application/x-shockwave-flash"
> >
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> > n=ShockwaveFlash" />
> > </object>
> > </noscript>
> > </body>
> > </html>
> >
> >
> >
>
> I am copying and pasting the codes so ignor the left
">"
>
> Any help ? pls and thanks
>
>
Maybe you are looking for
-
Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here... I have an iphone 4S and I did the last update. Now I am in trouble. 1. When I move the "sound on/off" button, I get it buzzing 10 ti
-
Display Text Elements in BI 7.0
Hi, We are now working on BI 7.0. We need to display the text elements for a specific query i.e the values entered by the user in the variables have to be displayed. I am aware of the Design mode option after executing the query. I did select the Tex
-
Adding file in SharePoint document Library using sandbox solution
Why I am Missing Uploaded File name In Post back & am unable to add debugger give me solution thanks in advance Below is my sample code protected void btnsubmit_Click1(object sender, EventArgs e) try //upload Imag
-
Nokia 2760 security code forgotten
Hello I put a security code on my Nokia 2760 and I have not used it some time (4 months) because I do not have money to put credit on my SIM card . And now I am trying to use the phone and I can not use it, it ask me for security code and I do not
-
Why do I get a too many http redirect message when accessing top charts in App Store?
When trying to access Top Charts in the App Store I get a message stating "too many http redirects". I don't get the message with featured apps, updates, etc., just top charts. How can I fix this?