Add Emc storage error

Hi,
I am using SCVMM 2012 SP1 and want to add EMC VMAX storage to SCVMM . I have installed and configured SMI-S provider on my one of the two hyper-v host according to the link;
http://www.youtube.com/watch?v=hIRhmwAITFw
when i try to add the storage from SCVMM console it gives me the below error. i am using SMI-S CIMXML protocol to discover the storage.
An internal error has occurred trying to contact the RYHB5-VW-PRCVMM.prcld.com server: :w:InternalError: :HRESULT 0x81051003:.
WinRM: URL: [http://ryhb5-vw-prcvmm.prcld.com:5985], Verb: [INVOKE], Method: [Discover], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/windows/storage/MSFT_StorageProvider?ObjectId=interop:hRYHB5-PW-PRCLD2.PRCLD.COM:5988;ECOM_RegisteredProfile.InstanceID=%'Array+1.6.0%']
Check that WS-Management service is installed and running on server RYHB5-VW-PRCVMM.prcld.com. For more information use the command "winrm helpmsg hresult". If RYHB5-VW-PRCVMM.prcld.com is a host/library/update server or a PXE server role then ensure
that VMM agent is installed and running.
ID: 2912
Details: Unknown error (0x81051003)
Anyone please help me to resolve the issue?
thanks in advance

Hello,
Anyone please help me on this? I have installed EMC SMI-S provider enabler on my hyper-v host. My SAN Storage Administrator provisioned 3 LUNS to the my hyper-v servers (i have two hyper-v hosts on which one of them I have installed EMC SMI-S provider).
these 3 LUNS are visible on two servers. Do I need to required anything more like setup of iSCSI Initiator? I did not enable iSCSI Initiator on my Hyper-v server on which EMC SMI-S is installed.
please any one guide me on this.
thanks

Similar Messages

PSE8 not enough storage error

I keep getting the same error over an over again. Everytime I try to add Texture to document I get the "not enough storage error". If I close out PSE and reopen it then it will work again for a little while. Then it errors again. I have plenty of storage capacity so I am not sure what is causing the error. Any ideas as to how to fix this?

In PSE8 editor under Edit->Preferences: check Performance settings:
*taking the cursor/mouse on each option words will display the description of that option:
Modify the default settings as per your needs:
1) Set the total % PSE can use of available RAM.
2) reduce the number of history states (Undo states)
3) Under scratch disks area in case you have more than 1 drive do check so it can use memory from more than 1 drives of your machine.
After making this changes close PSE and launch again.
I am sure memory performance should improve. Let me know if you have any comments.
-garry

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

How do I add more storage on my iPad?

How do I add storage on my iPad? I can't update several apps because my storage is not sufficient.

You can't add additional storage to your iPad. You can see how much space apps are using via Settings > General > Usage, and how much free space that you have available via Settings > General > About > Available. You generally need approximately twice an app's size to be able to download and install it.
There are also wifi-enable drives that allow you to allow you to stream content to an iPad, so films, TV shows and music don't need to be stored on it e.g. Seagate GoFlex Satellite

Add-on Conflict error while installing add-on LOCIN release 100

Hi experts,
I want to install the add-on for India Localization for IS-Utilities i.e., LOCIN release 100. I have downloaded the add-on and also the CRT(SAPK-10001INLOCINISU) required for the add-on.
we got an error while installing the add-on it is
"OCS package SAPK-10001INLOCINISU does not match the current software component vector"
if we remove the CRT from the queue and start the installation then it will give add-0n conflict error.
Conflicts Between Add-On LOCINISU 100 and Support Packages
Component    Release      Support Package        Information on
                                                  Conflict Resolution
FI-CA        600          SAPK-60004INFICA       Include CRT
                           SAPK-60005INFICA       Include CRT
                           SAPK-60006INFICA       Include CRT
                           SAPK-60007INFICA       Include CRT
                           SAPK-60008INFICA       Include CRT
                           SAPK-60009INFICA       Include CRT
                           SAPK-60010INFICA       Include CRT
Plz tell the solution for this.

Hi,
I had somthng like this recently with SCMEWM....
1. Clear out your EPS/in directory
2. Download the latest version of the add-on and all the patches ===> the latest CRT's will be in the patches.
3. Unpack them and try import again.
Also if you have not seen or read:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=950513
Mark

Some Journaled Calendar Requests get stuck in Submission queue - 550 5.6.0 - storage error in content conversion

I am having an issue on hub transport servers running Exchange 2010 SP3 RU6.
Where some journaled meeting request related messages (acceptances, etc.) get stuck in the Submission queue.
The error is:
400 4.4.7 The server responded with: 550 5.6.0 M2MCVT.StorageError; storage error in content conversion. The failure was replaced by a retry response because the message was marked for retry if rejected.
I raised the issue with our mail archiving vendor and they indicated this was an Exchange Server problem which should have been fixed in Exchange 2010 SP3 RU3, however we are running SP3 RU6 and the issue continues to occur.
I realize that we could just delete the stuck messages from queue but has anyone run in to this before and know how to prevent it from happening?
Thank You.

Hi Mike,
If you temporary disable\bypass third party Archiving , then what happens in the Queue.
Thanks , Prakash
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

How do I correct the silverlight application storage error to watch netflix movies?

I get a Silverlight application storage error when attempting to watch an instant netflix movie. Following instructions of error message does not correct. Instant movies play properly with Explorer - but not Firefox.

o resolve this error, you will need to update Silverlight application storage:
1. From within the Silverlight player, right click.
2. Click Silverlight.
3. In the window that appears, click the Application Storage tab.
4. In the next window, click the "'Enable application storage" checkbox.
5. Click the "Delete all' button.
6. Click Yes.
7. Click OK.
8. Click your browser's Refresh or Reload button to continue.

Is there any way I can add extra storage to hold my Newsstand magazines?

Is there any way I can add extra storage to hold my Newsstand magazines?

Thanks for that. It is what I expected.
There are lots of WIFI and flash drives that you can plug in but, as far as I can see, they are only useful for holding stuff pre-loaded from a PC/MAC, and can only be used via a special app.
Let bus look forward to the day that Apple give us a memory extension socket.

Imac G5 (pre isight). Mass Storage Error

I have an imac G5 (pre-isight). Using Tiger. Recently it has been playing up. Two main problems: starting up and waking after sleep mode.
*Starting up issues*
There doesnt seem to be a consistent problem here. Sometimes it hangs on the grey apple screen, sometimes grey probitory sign screen. Sometimes it hangs on a black screen with white writing. On about the 10th to 20th time of rebooting, it seems to startup and work fine.
*Sleep issues*
If I leave the computer to go into sleep mode, it tends to freeze in whatever application is open. Especially Safari.
I have tried numerous fixes. I've reset PRAM, done the SMU thing. Repaired and verified disk many times. Repaired and verified permissions. I've archived and installed and archived and erased. There's barely any software on here apart from the operating software and MS Office (legal). I'm using an apple keyboard (wired) and a wired mouse. There's no important info on here so am happy to wipe everything.
Finally i did a hardware test and received a "mass storage error" (only appeared for the extended test)...
2STF/8/3: S-ATA Bus 0 –Master
Having looked up several forums i replaced the hard drive. (Made sure it was compatible, similar size and same specs as original). Reinstalled software and got all the latest updates. Seemed to be working quite well for a day or so, although there was a few 'permissions' error which seemed easily fixed.
Today i awoke the imac and it had frozen. Back to it's old tricks. Tried restarting and got grey screens, black screens etc. Repaired permissions. Ran another hardware test and getting the same error message about mass storage!
So if it's not the hard drive, what's wrong for my imac? Is it time to just dispose it?
Thanks in advance for any ideas you may have.

The recall ended many moons ago, and it's a capacitor problem, they all need replacing, those in the power supply as well, probably.
If you are handy with a soldering gun, have steady hands and are good at repairing electronics, you can do it yourself. Look at [welovemacs.com] or [synaptech.com] for parts and advice.

10g R2 RAC on Solaris 10 with EMC Storage

We are in the process of setting up 3/4 node RAC with the following components:
Oracle 10g R2 RAC
Oracle Clusterware / Sun Cluster / Veritas Cluster
Sun Solaris 10
EMC storage
ASM/Cluster FS
I would appreciate if some one can through some light on:
* ) Veritas cluster / Sun Cluster is must component or Can I use Oracle clusterware ? what are the advantages and disadvantages of using Oracl clusterware compare with varitas cluster or sun cluster
* ) Is cluster filesystem a compulsory component or Can I use ASM instead of Cluster File system.
* ) If I don't use cluster filesystem where to put CRS repository and voting disk ?
* ) What is best option for Oracle_Home, is it shared oracle home or sepereate oracle_home on each node ?
* ) Are there any known risks invovled in using ASM. How is the I/O performance with ASM on EMC with Solaris ? Are there any best practices
* ) Is GigE okay for interconnect or do I need to go for Infiniband ?
* ) Is there any notes on Best practices for the above components
*) Do I need to consider fail over option for NIC's (interconnect and public), if yes, how to do that ?
*) Are there any other risks do I need to consider ?
Thanks
G

Hi,
I see lot of good input. I have done few RAC installs on sun/solaris/emc ...
Here are few things to consider.
* ) Veritas cluster / Sun Cluster is must component or Can I use Oracle clusterware ? what are the advantages and disadvantages of using Oracl clusterware compare with varitas cluster or sun cluster
Just stay with Oracle Clusterware. If there are any issues then you only have to deal with one vendor and there will be no finger pointing. In any case Oracle Clusterware is needed even if you install Veritas/Sun.
* ) Is cluster filesystem a compulsory component or Can I use ASM instead of Cluster File system.
For the database you can use ASM. The only time I have considered a cluster filesystem is if external tables were in use.
When you use ASM you need to partition the disk with 1 meg offset or start at cyclinder 1.
* ) If I don't use cluster filesystem where to put CRS repository and voting disk ?
OCR and Voting Disk go on raw devices.
* ) What is best option for Oracle_Home, is it shared oracle home or sepereate oracle_home on each node ?
Install ORACLE_HOME, ASM_HOME and CRS_HOME locally on each server.
* ) Are there any known risks invovled in using ASM. How is the I/O performance with ASM on EMC with Solaris ? Are there any best practices
http://www.oracle.com/technology/products/database/asm/pdf/asm-on-emc-5_3.pdf
We have always installed 2 HBAs and used powerpath.
* ) Is GigE okay for interconnect or do I need to go for Infiniband ?
For a majority of cases gigE is sufficient.
* ) Is there any notes on Best practices for the above components
Have redundancy at each level.
*) Do I need to consider fail over option for NIC's (interconnect and public), if yes, how to do that ?
You can use IPMP. Use large send/receive buffers. Enable Jumbo Frames.
We had to apply some patches.
5128575 - RAC install of 10.2.0.2 does not update libknlopt.a on all nodes
4769197 - WHILE ONE NODE OF RAC IS DOWN, CONNECTIONS FROM CLIENT HANG
patch 5749953
Thanks
G

Netflix application storage error N8011

Greetings,
I have been searching for information on an issue my daughter is experiencing with Netflix on her MacBook Pro c2009. I have read many things in this issue, but have not found a true fix. Perhaps you can help.
When she starts a movie, instead of the movie playing she receives the following error: Application Storage Error N8011. It tells her that Private Browsing is enabled and instructs her to turn it off or call Netflix. However, Private Browsing in not enabled. I have played around with Private Browsing and am fairly sure this is not the issue.
The few things I have found in discussions on the net (suggestions that Netflix is not compatible with Safari 5, instructions to reinstall Silverlight, and making a new user account) have not provided a solution.
The suggestion that Netflix is not compatible with Safari 5 might have been relevant some time ago, but it clearly is not "the" issue because I am able to use Netflix on the same computer using a different account.
I have removed Silverlight and reinstalled it without any noticeable effect. Again, Netflix works with my account on the same computer. And Silverlight is a shared plugin, it does not need to be installed by each user.
The "fix" that I found repeated a few times is to create a new user account (named "test"). This does work, but it is a work around. It is NOT a "fix".
I believe the issue is related to an account permission or perhaps a Safari user configuration, but I have not been able to uncover anything in this light.
The new account I created as a work around does not have Admin privileges, but Netflix does work with that account. This reduces the range of possible causes.
If you have had a similar experience and have found the solution, please share it.
Thanks!

Thanks for your reply Klaus1.
The link you sent does not work: Error 404 - Not Found
I think the url you meant was:
http://www.engadget.com/2010/06/07/how-to-re-enable-netflix-in-safari-5/
I had seen this page and tried it, but reverting to version 4 did not help the affected user account. Besides, Netflix is working with version 5 on a different user account on the same computer. For these reasons I'm pretty sure the version 5 thing has been resolved.
By the way, the info in the above link is really cool. I had no idea there was a way to revert Safari to prior versions. Apparently this is a feature for developers to test their web pages in different versions of several browsers - Cool!
Back the to point, I'm curious how many people have experienced this N8011 issue with Netflix. By the dearth of info on the web addressing this problem, I'm guessing it is not very common. But it is real, no the less.
Any help would be appreciated.

MSExchangeTransport critical storage error and recovery

Hi All,
Yesterday, I received the following error on one of my Hub Transport servers and I'm not sure if there is any action I need to take from this point:
"MSExchangeTransport has detected a critical storage error and has taken an automated recovery action.
This recovery action will not be repeated until the target folders are renamed or deleted. Directory path:D:\Transport Queue is moved to directory path:D:\Transport Queue\Queue.old, and directory path:E:\Tranport Queue Logs is moved to directory path:E:\Tranport
Queue Logs\Queue.log.old."
At this time, I also received a few alerts that Forefront had timed out while scanning some messages and that resources on the machine were limited.
Did I lose any data when this automated recovery occured? What does the message mean by: "This recovery action will not be repeated until the target folders are renamed or deleted"
What is considered the Target folder? The "old" location or the new location? I am currently running Exchange 2010 SP1 RU2.
Thanks for your thoughts!

Hi
I just find this eventid – 17102 relevant to this.
If the Queue.old directory already exists and a recovery is attempted then the following error is reported in the Windows Application log:
EventID: 17102
Description: MSExchangeTransport has detected a critical storage error and has taken an automated recovery action.
This recovery action will not be repeated until the target folders are renamed or deleted. %2 Where %1 is the database instance name, %2 is a list of the path changes
To resolve this issue simply delete or rename the contents of the Queue.old directory and restart the MSExchangeTransport service. Please finish recovery process. I can’t say whether you lose data.
Please check it by yourself. But I don’t know why you meet this kind of error.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SP01 PL03: Click on Grid Link button, add-on disconnected error occured

Hi Frank,
I upgrade my add-on to SP01, there is an error when click Link button which in a UDT bound grid, the error shows 'System Message' with three option buttons, [Restart Add-on],[Log off the current company] and [Continue working without this Add-on], this error does not occur on SAP 2005 PL7,PL8, PL9 & PL10, but occurred on SP01 and SP01 PL03.
The grid Link button link to master like BP, G/L Accout and Item.
Hope there is a workaround way.
Thanks.

What version / PL was your Add-On compiled with before?
Was it done with 2005A SP00 PL?? ?
Anyway, I am happy to hear that it works now...
regards,
Frank

"mass storage" error

Suddenly began to have problems with my powerbook 2 days ago. Strange fluctuations in screen brightness with corresponding audible surges from the speakers. I reset the power management unit and the problem seemed to have been solved. Now, the system locked up giving me all kinds of odd errors: for example, while using iWeb I could not publish because the disk was full despite there being plenty of free space on my hard drive and on iDisk; trying to save in pages or iWeb gives an error with a strange number that I failed to note.
My worst fear being the loss of data, I quickly decided to hook up the powerbook in Target Disk mode to my girlfriend's iMac to transfer critical data for safe keeping. However, the iMac won't recognize the disk though in system profile it's listed under the "firewire" tab. I then ran the Apple Hardware Test and got the following error for "mass Storage"
"Error*Code... 2STF/8/3:ATA-100ata-6-MASTER"
Can anyone tell me what the heck is going on here?
One thing to note, believe it or not my dog (got to love her) ate through my DVD collection which included my Tiger install DVD. So, booting from that DVD is not an option. Any ideas, thoughts, hints, spectulations, or intuitions would be much appreciated.

If you ever see an error with the Apple Hardware Test, you will have to take your Mac in for service to repair it. That appears to indicate a physical/hardware problem with your hard drive. It will probably need to be replaced. It could be an issue with your logic board and the ATA bus itself, but that's a little less likely.
If you send the PowerBook in for hard drive service, it may come back with a new hard drive and the same version of Mac OS X installed that came with your PowerBook when you bought it. AppleCare support will send you a new set of install disks, but they may charge you around $60 to replace them. If your PowerBook came with Mac OS X 10.4, you may not be able to use a retail copy of Tiger to re-install.
-Doug

PGS & ORA-06500:PL-SQL : storage error

How do I tune PGA when I get an ORA-06500:PL-SQL : storage error. Works in 8i but not 9i. 9i is auto, 8i is not. Is this it?
Tx.

Different servers? Unix? If so, check OS (ulimit -a) first and then post the results. If separate machines then it might not be PGA at all.
I would strongly suggest checking that and then posting a new, more detailed problem statement to the Database: General forum rather than posting to the Oracle Text forum (since it isn't related). Toss in info about the server type(s), memory settings that you've checked, the full error, what you're doing when you get it, etc.
Thanks,
Ron

Add Emc storage error

Similar Messages

Maybe you are looking for