Add field BLDAT in BSEG

Is it possible to add in bseg the field BLDAT and if it possible how?

No BLDAT cannot be added to BSEG. it is a header level field and this field is available at the Header table BKPF.

Similar Messages

HOW TO ADD FIELDS OF BSEG-ZFBDT & BSEG-ZBD1T

hi frnds.
currently iam working on SD MODULE I NEED the NET DUE DATE SO HOW TO DO THAT
1 problem plz:
HOW TO ADD FIELDS OF BSEG-ZFBDT & BSEG-ZBD1T
TOGETHER
one is date & other is numeric value so how?
one is date & other is numeric value so how to add this 2 fields
& finally i want to display the o/p in date format dd/mm/year
THANKS IN ADVANCE.

Hi Mahesh,
one of the nice features of ABAP is that it takes care about month/year changes when adding days/month on a date.
ADD lv_zbd1t TO lv_zfbdt.
This should work fine. If not, try to convert zbd1t into an integer first.
To get you preferred date output format try this:
DATA: lv_datestring TYPE string.
CONCATENATE lv_zfbdt+6(2) '/' lv_zfbdt+4(2) '/' lv_zfbdt(4)
INTO lv_datestring.
This isn't tested, but should give you a clue.
Regards,
ok

How to Add fields in dynamic selection LDB BRF

Hi All,
I have requirement to add a field BSEG-ZLSCH in Logical Database BRF dynamic selection.
I have tried doing the same by using below mentioned link but its not appearing in the report dynamic selection screen
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?quicklink=index&overridelayout=true
Could you please help me a Legal change delivery is pending due to this issue.
Thanks and best regards,
Niteesh Rai

Dear Niteesh,
The Logical Data Base BRF reads table BKPF and BSEG, but there is no
option to include fields from BSEG in the dynamic selection.
You can display all the tables included in BRF, but only fields from
BKPF could be included in the dynamic selection. You cannot add
entries from BSEG, BSET, KNB1, KNBK, and so on that are listed here.
You are right, there is not note that explains this behaviour, but I
inform you what is the system design. This has been confirmed by my
Development colleagues.
Regarding to note 832997, this is valid for releases 500 and 600 when
New G/L is available. The system functionality has been enhanced in
release 500 so you can add fields from FAGLFREESEL that is similar
to BSEG with New G/L.
BR, Hana

Add fields in Drilldown customer reporting open items

Hello,
I have made a copy of the standard Drill down report 0SAPDUEAN-01,but I want to add fields that are not in the pooll list (like Reference - BKPF-XBLNR) or Assignment (BSEG-ZUONR).
How can I do this?
Any help will be rewarded
Best regards,
Victor

Hi Austin
I need to do the same. I need to bring Bill of Lading number (which is Shipment number in our case). I need to bring that to the assignment field in the gl account. I know this can be done through sort key, but the field TKNUM is not avilable for sort key. I was wondering if you have found any solution of this.
Thank you
John

F-54 Add column BLDAT into Item data

Is it possible to append the field BLDAT (from Header) into Item data?
1.Enter f-54. You see screen 114 programm
2. Then fill in the obligatory fields and push button ENTER.
3.Now you see the table Down Payments - screen 1703. I need to add a new column - BLDAT into this table.
I had seen a Configuration->Administrator(button on the right up the table), field BLDAT was absent there.

Hi Anastasia,
Under normal circumstance, document date should be there. If not, do the following.
1. Enter transaction code: SHD0
2. Enter transaction code: FBA8
3. Click on Screen Variants
4. Screen Variant: Enter "STANDARD 4_1010
5. Enter Program: SAPMF05A
6. Screen: Enter 1010
7. Click on Change: Check off Document Date as required.
8. Save and carry out a test from this screen by clicking on the test tab.
Alternatively, you could use FBA8 instead of F-54 since they all use the same program.
Let me know if this helped.
Elias
Edited by: Elias Akorli on Dec 3, 2009 2:29 PM

Add fields ple give ur solutions

Hi
i have some fields in 2lis_03_bf
remaing fields i didnt find. 8 fields i diidnt find in 2lis_03_bf
i need to add 8 fields, its available in 3 tables, in 2 tables comp code is common field (bkpf and bseg) in mbew i didnt find any primary key to link this 2 tables.
ple give me ur idea how to solve this problem
field:         table
BLART     BKPF
REBZG     BSEG
BUZID     BSEG
ZPLP1     MBEW
GJAHR      BKPF
MONAT     BKPF
BPMNG     BSEG
STPRS     MBEW

Hi Suneel,
You need to search in detail whentehr you can add these tables to the data source 2LIS_03_BF as adding different tables may change the behaviour of this data source. Most of the data for IM comes from MSEG and MKPF tables. So, if you need fields form these 2 tables, you can follow adding them to this daata source. I am sure you wont be able to find the fields in the structure in LBWE. If you are not able to include these tables then I suggest you to go for a Generic data source and you can create an ODS for the same and later you can join this ODS in a MP along with the IM cube 0IC_C03.
This is just a suggestion though...
Hope it helps..

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

How to ADD field in iview ?

hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, Martin

Gopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin

How to add fields to Structure in Report Painter

Hi All,
We have a requiremnt where we need to add 2 fields ( profit center-PRCTR & description-CEPCT-LTEXT ) to structure CCSS. This structure is attached to library 1VK.
Is it possible to add fields directly to a structure or do I need to create a new structure and attach it to a new library.
If any one of this is possible, how can I do this ?

Hi ,
u can do it in both the ways , but i am not much sure abt second option.
Useful Tcodes are GR21.
Regards
Prabhu

How to add fields in a z table

hi experts !
i have to add a new fields to an already existing Z table. how can i add field? do i have to delete all other entries and create new ones so that the entry in the new field also gets created.?
akanksha

Hi,
You have two options to enter data type while creating new field in table.
1. User standard data types i.e. mandt, kunnr etc..to use it u need to press "Predefined type" button present on top of table fields.
2. User custom data elements...this data elements you creates when you want to have data field specified to your required length.
Hope this will help.
Sumit

Add fields to Existing DSO and DS in R/3

Hi Friends,
I have got to change my LO datasource which is running on production, 2lis_va_vatim, i need to add 2 fields to the exisitng DS from Comm Stru, so could anyone point me inthe right direction, Hoow to Add the fields with out disturbing the production,
and the same way i need to cgane my DSO aswell for new fields, please tell me how to meet this.
Thanks,
Kiran.

Hi Kiran,
Before applying your changes in Production do the below steps:
1)run V3 job as immediate, which picks data to delta queue and delete the acive V3 job.
2)run the IP which loads data to BW(Delta IP).
3)Apply your changes to the 2lis_va_vatim and DSO.
i)Do the changes(adding your fields to 2lis_va_vatim and DSO)in DEV and active the 2lis_va_vatim and DSO.(insert this in transports).
ii)first apply the R3 transport and then BW side.
4)from now on wards your 2 fileds will get populated in BW side.
5)Maintain the V3 job for 2lis_va_vatim in R3.
If you need any clarification how to add fields to 2lis_va_vatim and create transport req pelase check the below article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
Hope this helps.
Regards,
Venkatesh.

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

Can you add fields that are manually maintained.

I'd like to be able to add fields to my MAP Toolkit's inventory. For example, adding Asset and Warranty fields, to keep track of this information. I'd be maintaining the data manually, which is fine since it doesn't change very often. Is there a way to extend
the toolkit to include these types of fields?
So far the only solution I've been able to think of is to generate reports, convert the .XLS to .CSV, and then use PowerShell to merge the .CSV with a file containing the static information. This would be quite an undertaking as I'd need either different
scripts, of different logic paths, to deal with the multiple reports available from the toolkit.
Thanks
Jim Winner

The reports are generated using queries that are in stored procedures. I suppose it would be possible to modify the query so that extra columns would be created, but I don't know how you would get the data into MAP.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

Add field BLDAT in BSEG

Similar Messages

Maybe you are looking for