Add field in Traxn FPP1 transaction

Hi,
I have to add a new field on the Concession card tab of transaction FPP1. can you please send step by step procedure to add the field on the screen..
Regards,
Mukesh Kumar

You can acheive by EEWB or BDT.
Go with EEWB.
EEWB Business Object :: BUPA
Extension Type :: ADD_NEW_FIELDS
Run the wizard.
After that go to BUPT area menu tcode.
Business Partner->Control->Screen Layout Add into required sections.
Reward Points if helpful
Regards,
Shiva Kumar

Similar Messages

Add Fields in S_ALR_87013570

Hi All,
I want to add fields in ALV in transaction S_ALR_87013570.
The way i find is to copy the program but it seems very complicated because of 2 things:
First one, there are a lot of programs to copy and if a update comes, the copy will not be updated...
Second one, the program seems to be "mandant (system)" dependent...
Sorry, i've checked now and the program is not System dependent... There was an "If sy-mandt <> XXX".
I copy the first part and when i activate it, if i try tu use it in my "test mandant", an error appears and say "Program could only be used in mandant (system) XXX".
Could somme one tell me how to use this program in other mandant (system) (i try to transfer it with scc1 but don't work)?
And is there any other way to add fields in report S_ALR_87013570?
Thanks
Luis.
PS: Please, apologize me for my english i'm a spanish boy who live in french country :o)
Message was edited by: me :o)
Luis Loredo

Hi,
I follow this good topic, but I have two questions :
- I created me own Z* from standard 6PP2-001 and I would like add just one column but I can't ... only new section or horizontale page are available. Can you explain, a little more, the differentes steps to create column ?
- In a second time, I'm looking for fill this new column with my own selection. User Exit with structure append on CCSS, I think is the good solution but ... I don't find place for abap customer ... any ideas ?
By advance, Thank you.
Ps: sorry for my english ...
Edited by: AlexDoy on Jul 13, 2011 8:36 AM

How to add a search help to a field Bank Type in Transaction FK02

Dear All,
     How to add a search help to a field Bank Type in Transaction FK02.
     Is there any possibilty of using exit or searc help or domain to solve this problem.
        Thanks in Advance..
Thanks,
Lakhsmi.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

Add custom fields in EL09/EL35 transaction

Hi,
I need to add custom fileds in these transactions in order to specify particular client information I have to extract in the output of meter reading order.
How can I accomplish this need?
Do I need to define a custom transaction or do I have to implement some customizing-badi,... I didn't find anything useful in my researches.
Can you help me please?
Thanks,
Gabriele

Hi Gabriele,
When we are generating meter reading orders, entries are made in tables EABL & EABLG. You can add custom fields in these tables using enhancement EDMMR001.
Based on your rules / logic, you can update these custom fields from user exit - EXIT_SAPLEL01_010.
Now, when you are downloading meter reading orders, you can access these values.
Alternatively, if you can derive these additional values in run time, you can place your logic in Meter Read Order Download Print Workbench program.
Hope this helps.
Regards,
Avinash

Add new fields to coding block-transaction code-OXK3

Hi Friends
I need below clarification in addition of new fields to Coding block from transaction code- OXK3.
1) Which approach is adivsable either EXPERT MODE or BASIC MODE.
2) In Expert mode access key will be required to add field manually into BSEG table.
In Basic mode approach do we need access key?
I found below statement from SAP HELP during BASIC MODE, correction number is TR number does repair number say as access key for table BSEG.
SAP HELP STATEMENT- In the production run, you are asked to enter a correction number and a repair number for table BSEG. Both specifications must be contained in the same transport request in order to import the enhancement correctly into the EDI subsystem.
Thanks & Regards
Lavanya

i got solution

Enhancements to add fields to PO in ME22 transaction using MM06E005

HI,
     any one can help me, how Enhancements to add fields to Purchase order in ME22 transaction using Enhancements MM06E005.What is ME22 transaction and Enhancements MM06E005. Plz explain

HI,
FOLLOW THIS STEP
     GO TCODE CMOD
    ENTER PROJECT NAME
    CLICK CREATE
    CLICK ENHANCEMENT
   ENTER MM06E005.
   PRESS ENTER
   CLICK COMPONENT
IT WILL DISPLAY THE ALL ENHANCEMENT IN MM06E005
   DOUBLE CLICK FIRST SCREEN EXIT
IN ATTRIBUTE CLICK SUBSCREEN
GOTO LAYOUT
CREATE FIELD WHICH YOU WANT
IT IS SUBSCREEN .SO SELECT LINE 0 AND COLOUM 0 IN SCREEN ATTRIBUTES.( WHEN YOU DOUBLE CLICK ON FIELD IT WILL DISPLAY)
SAVE AND ACTIVATE
GOTO FLOWLOGIC
ACTIVATE
GO BACK
ACTIVATE PROJECT
GOTO TCOD ME22
ENTER PO
PRESS ENTER
GOTO MENU HEADER -> DETAIL
IN THE BOTTOM YOU CAN SEE THE YOUR ENHANCEMENT
REGARDS
ASHOK KUMAR

Add field GKONT in Transactions FBL1N, FBL3N, FBL5N

Hi folks,
is it possible in SAP Standard to add the field GKONT in the transactions (mentioned above).
I did not find a way to add it. In Customizing there is a path in customer and vendor accounting to add additional fields, but the field GKONT can not be found.
The customer says it would have been possible at SAP in the company he worked before, but I guess it must have been an adaptation.
Any ideas or opinions?

Hi Heiko,
I woulsd post this message in FI-section of sdn forum.
I think there are experts, who are more fanliliar with this kind of stuff.
Good luck and a nice week end
Joe

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

Urgent: Add field in generic data source

Hi,
Could anyone please help me out in resolving the issue to add field from different table in generic datasource.
How can I add it in R/3 data source when a function module was created in ABAP to generate fields from PLPO table?
Whatz the changes has to be done at BW side to map the added field?
<u>Requirement</u>
1) Need one more field in the extractor. Field name is PLAS-LOEKZ. Initially client wanted me to add PLPO-LOEKZ which I added, now he needs the same fields from both the table (PLAS and PLPO).
2)The name of the extractor/structure is ZBW_ROUTINGS_OPERATION
3)Now, we need to add this field (LOEKZ from PLAS) in the function module as well. FM name is: Z_BW_ROUTE_OPERATION_EXTRACTOR. This will be in a SELECT query. We need to add this field in the SELECT statement.
Testing will be done in following steps
1)     Go to Transaction RSA3.
2)     Enter the data source Z_BW_OPERATION_ATTR(not sure about the name though, but it should end with OPERATION_ATTR)
3)     Enter the following details:
EXTTY I
PLNNR 50000032
PLNTY N
4)     Now execute (F8) the transaction.
5)     Click on Display List
6)     In the output, we should be able to see these 2 columns(PLAS-LOEKZ) and (PLPO-LOEKZ)
Please send your valuable suggestions to resolve the issue ASAP as its damn urgent.

Hi,
Here is an overview of the solution -
Use T.Code SE11> ZBW_ROUTINGS_OPERATION. Add your new field (PLAS-LOEKZ) to this table, check, save, activate. Edit your function module, SE37> Z_BW_ROUTE_OPERATION_EXTRACTOR and add your code to look up the correct value of this field LOEKZ from the table PLAS, check, save, activate. (Note that SAP provides a sample function module you can use as a template and customize for your requirements. This sample function module is RSAX_BIW_GET_DATA_SIMPLE.)
Your Generic DataSource Z_BW_OPERATION_ATTR is already created, you dont have to change any settings here. Just regenerate it in RSO2. Now test the extraction for the DataSource in RSA3.
Hope this helps
Sandeep

Adding field in standard SAP transaction output results.

Hi,
I have to add a new field in standard SAP transaction output results.
Can any one tell me what are the ways (brief explanation) that I can do this?
If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
Thanks for your time.
Thanks.
Chris.

Hi,
There are so many ways to find out the user exits.
Hi,
To see SAP Exits -> Use Tcode SMOD
To See create a project for Customer Exits -> Use Tcode CMOD
There are projects to which Exits are assigned. Selects the relevant projects.
What is User Exit:
http://www.sap-img.com/abap/what-is-user-exits.htm
How to find then:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
All Exits List:
http://www.easymarketplace.de/userexit.php
Do a search on SAP Exits, Customer Exits, enhancements, etc
Step 1 :- Execute transaction
step 2 :- Click on Status Menu
step 3 :- Double click on the program (screen) __?????___
Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
You can now double click on each of them to go to its position in the source code. This also
allows for the insertion of breakpoints so that you can test if the exits are called in the
appropriate place.
Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
access the actual function module it executes. This is done using the following steps:
Step 6.1 :-
Step 1
Locate desired 'Call Customer-function' statement within source code.
Step 2
If code is not within main program (module pool) e.g. SAP* then you will need to find this
out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
Step 3
The actual function module name can now be calculated based on the information retrieved,
it is defined by the following format:
EXIT_<Program name>_<Exit number>
eg :- 'EXIT_SAPLMR1M_004'.
Step 7.1:-
Once you have found the Exit function module
Step 1
Execute transaction CMOD
Step 2
Select 'SAP Enhancements' from the 'Utilities' menu.
Step 3
Select 'All selections' from the 'Edit' menu.
Step 4
Now populate the Component name field with the exit function module and press
the execute button.
Step 5
A list of all Exits(Enhancements) containing that function module should now be displayed.
Step 5
You can now double click on the desired exit to display a detailed description of its uses and a list of all
components contained in it.
Implementing Function Exit
This is required in-order to activate Function exit:
Step 1
The first step is to enter source code into function module in the usual way i.e. via SE37.
There will already be an include declaration within the code with the following
format: Include zx*.
Double click on this to create it, source code can then be entered within here.
Although it is good practice to create another include with this to store your
code, this allows separation of difference enhancements allowing them to be easlity
removed without de-activating the enhancement.
Step 2
Execute transaction CMOD and create new Enhancement. Enter name and press the create
Button.
Step 3
The following screen should be displayed, enter short text then click on the 'Enhancement
Step 4
Now enter the Exit name (enhancement) which contains the desired Function Exit.
Step 5
Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
Please Mark The Helfull Answers & close the thread.
regards
dj
reward for all useful answers.

Add field from structure maintanace option for datasource in LBWE (BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field not by structure maintanace option in LBWE but form append structure option from that structure MC02M_0ITM ( that field is not in that maintanace option in LBWE) than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Add Fields from table ADRC (Fields Name 1 to 4) for Open Item Processing

Hi SAP Expert:
Our client requires vendor/customer name to be displayed in the open item processing line layout for transaction code f-58, so they can double check if the vendor name is complete as intended.
We intend to add fields from table ADRC instead of REGUH since the characters in maintaining vendor/customer name is 40 characters and REGUH - ZNME1s are only 35 characters.
We have managed to add fields from ADRC and change the SAPDF05X program and were able to display the names in open item layout, except that the program seems to "automatically" create a generic table which only carries 30 characters of the vendor/customer name. The source table should be RFOPS_DK but the program automatically looks up from table RFOPS_GEN for the particular fields - Name 1 to 4. Is there a way to "instruct" the program to use RFOPS_DK instead of RFOPS_GEN?
Hope this will merit somebody's attention... Thanks !!!

Thanks, i have assigned the layout via o7v3, it is the program that i have a problem with, actually another program that we change is the program MF05BFPO where it generates data to be displayed in the FBZ4 screen, though we add a field with 40 characters (ADRC Name 1 to 4) what the program dispalys is a 30 character Name1 to 4 from structure RFOPS_GEN.
My question is can i extend/change the structure RFOP_GEN to 40 characters, is there any SAP standard program that will aftected if i do so? thank very much...
Lorena

Need to Add field EKET-EINDT and EKET-SLFDT to ME2M Report output in ALV

Hi All,
I need to add fields EKET-EINDT and EKET-SLFDT to the output of program ME2M Transaction.
I have appended the structure MEREP_OUTTAB_PURCHDOC with these fields. and it is coming in the ALV output field catalog.
I need these fields output only for ALV display only.
Please let me know which enhancement i need to write code to enhance the output with these filed values added to the ALV internal table
Thanks in Advance
Arun

Hi All,
I am able to get the field EINDT and SLFDT into the structure using Append structure and is also getting displayed in the output in ALV.
But i need to know how to add code for filling these fields and passing into ALV. I need to know the Enhancement spot.
Please let me know how to achieve this scenario
Thanks
Arun

FM for CUSTOM FIELDS added in BP transaction

Hi all,
We have added few custom fields in the BP transaction.
Now the thing is we need to update those using Function module.
Could any one please help me like in which Function Module can i found those
fields once i add in the BP transaction?
Thanks and Regards,
Gopinath A

Hi Gopi,
Have you used EEW to add these fields?
There should be a function module(s) generated for this new fields which you can use to update this fields? Probably something like
'BUPA_CENTRAL_CI_CHANGE'
Hope this helps.
Surendar

Text Field is Blank in Transaction F-28

Hi Experts,
There is a requirement to add to the current layout the text field in F-28 transaction code. However, when I add them as an administrator, The text field is blank. We already maintained the text field in both Accounting Document Line item and in the Invoice but still the text field is blank. Where can we find the value of text field in the documents shown in F-28. Are there any configuration to do this?

Ok. Currently they had this problem on tagging which Invoices to be considered for payment clearance in tcode F-28. Their current process is every Ship-To-Party, they also equate it as one project code with the location of the project information,etc. They are using this ever since the first implementation. So in their process, they go to FBL5N to check those invoices created before going to F-28. In FBL5N, I incorporated the text field there (filled by user-exit display) which also came from the accounting document. But it's not correct since they are using the ship-to-party value in F-28.
So we tested by manual input directly the Ship-To-Party Code to Acc Doc Line Item Text Field. It went to FBL5N, as showing the value there but in F-28 it is not showing.
Do you have any solution for this? Since during payment in F-28, I think these entries are already Acc Doc Entries and Ship-To-Party is not reflected here but Payer only (coming from the invoice).

Add field in Traxn FPP1 transaction

Similar Messages

Maybe you are looking for