Add Field into ICCMP_BP_DETAIL/BuPaCreate
Hi All
I have a requirement to add the Identificantion Type Field and IdentificationNUmber Field to the BP Creation Process in IC, but this two fiels are not in the Fields option of the component.
Some one can tell how i can add those fileds if i have to add the Contextnode for the BuilIdentification BOL o by other option.
Also can works for me if when i click on create the a call the Account Creation stnadar view (full view).
Thanks for any help.
Best Regards
Thanks Naresh
This solution works in the Modification Process perfect but during Creation the Value is deleted and not saved.
Do you know is a should do something else and where, no exactly for this field, for example if i wan't to capture the Clasification value during the creation of a BP in the IC WEB.
Best Regards
Similar Messages
-
Can I add fields into ACS 5.4 Certificate Dictionary?
Hi,
I need to check values in field that is not available in the ACS 5.4 certificate dictionary...
Can I add fields to it, or is it static?
Thanks,
Naor.Hello Naor-
You can edit some of the built-in attributes but you can also add your own/custom attributes. Go to > System Administration > Configuration > Dictionaries > Protocol
Thank you for rating helpful posts! -
Add fields into a new tab page
Hi!
I am in cProject 4.0 and there is a functionality to add new tab pages with fields in cProject components. The IMG activity is Collaboration Projects -> Global Enhancements to Project Elements -> Show Additional Tab Page in cProjects.
The help for this activity specified that I only need customized it to works as well. It does not specified if I have to develop some extra BSP or webdynpro to work. I tried to put a new field in a new tab page in Project Definition, but only the new tab was showed. The new tab is empty.
I know that in cProject 3.0 it was necessary a BSP development. Is it necessary develop a BSP in 4.0 too?
Regards,
Rafael SoaresHi Vivek, how are you ?
I hope that you can clarify my doubts !
I created my own Web Dynpro Aplication and assigned it in the customizing from cProjects.
My aplication use fields the others tables (Z) and fields from table DPR_PROJECT (enhance CI_DPR_PROJECT). So, the logic to read and write my Z tables is working, but my problem is How Can I update the fields from CI_DPR_PROJECT structure ?
I imagine that I need to read the container from UI standard, but until the moment I can't resgate these values. In customizing is that if I use the fields from CI_DPR_PROJECT the update will be automatically.
Thank you very much,
Milena -
BP Role is not be able to add field into a account( corporate account) in CRM UI
BP role is not replicated in the personalize of account management......for example: corporate accounts, Individual accounts,......
In the component workbench, i added the field Bp role to the accounts( individual account, corporate account ),....This field is not replicated to CRM WEBUI ......I don't understand your doubt either, but I will assume you are talking about the BP role (partner function).
By default the customers from ERP are created in CRM with the sold-to party role, this is the standard behaviour, if you want to replace that logic to use a specific role or even add another role you must add a custom FM to the middleware event table for BPs, you will find lot of information about this if you search a little.
Cheers!
Luis -
Add display field into form after updating database
I have a form generated, then add fields into database. Other than re-create the form, are there any other way to add the addition field into the form ?
K,
You'll find answers to most of the basic questions in the user guide, http://download-west.oracle.com/docs/cd/B13789_01/appdev.101/b10992/toc.htm. Let us know if you have specific questions that aren't addressed in there.
Scott -
How to add a function field into the existing matrix report
Hi,
I have a matrix report , now i wanted to add one moe field into the matrix which is getting the value from a function , this function is a part of the ref cursor query(group) , i'm able to get the value from the function but it cannot display on the existing matrix report. i wanted to add this in the repeating frame which is printing down. how could i do this , looking for your help. thanks . bcjHere the scenario like,
Data from Table_1
NAME UNITS DAYS RATE
AAA 10 1 1.2
BBB 12 2 3.1
AAA 20 2 4.1
CCC 23 1 5.2
Here, In the matrix report the NAME and UNITS are row fields and 'DAYS' is column field , RATE would be the cell field, and
Data from Table_2 ,
NAME BASIC
AAA 2
AAA 2
BBB 2
CCC 3
In the report i have to display the 'BASIC' along with the NAME in row level ( repeating frame printing down),
To get the multiple 'Basic' for each 'Name' using a ref cursor .
and, using a function to do further calculation based on the basic value
begin
select basic into v_basic where name =:name;
return(caluculated_value);
end;
and return the calculated value to the report. But at that time cannot accommodate the value in the matrix report with other groups frequency.
looking for your valuable help. Thanks Bcj -
Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
IceDear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas. -
Add EEWB Fields Into BP Contacts Screen In Web Ui
Hi Gurus,
I added 2 fields through EEWB for the BP relations screen it is working perefectly in the SAP GUI , i need to add these fields Into BP Contacts web ui screen , the problem is if fields data is already present it is working fine , if want to create new one for the contacts it is not setting the field value in web ui what is the problem help me resolve this problem.
Regards,
Naveen Kumar M SHi Masood,
In BP_DATA and BP_CONT SET Methods We Have the same Code
entity ?= current.
coll = entity->get_related_entities(
iv_relation_name = 'ZZ2RCEEWCONTACTRel' ). "#EC NOTEXT
current = coll->get_current( ).
if current is not bound.
return.
endif.
But while Debugging we found a difference
In BP_DATA
current is bound
whereas in BP_CONT current is not bound
while going inside
current = coll->get_current( ).
method IF_BOL_BO_COL~GET_CURRENT .
data: LV_ENTRY type CRMT_BOL_COL_ENTRY.
if ME->TABIX > 0.
read table ME->ENTITY_LIST index ME->TABIX into LV_ENTRY.
RV_RESULT = LV_ENTRY-BO.
endif.
endmethod.
ME->ENTITY_LIST was populated for BP_DATA and not populated for BP_CONT
Any Suggestions...
Regards,
Naveen. -
How can i add Custom fields into the
Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
SajidHi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek -
Can we add Resource custom fields into ASSIGNMENT TIMEPHASED CUBE
Hi,<o:p></o:p>
<o:p> </o:p>
We want to add Resource custom fields into
ASSIGNMENT TIMEPHASED CUBE in project server 2010.<o:p></o:p>
Is it possible?<o:p></o:p>
<o:p> </o:p>
Please help me in this.<o:p></o:p>
<o:p> </o:p>
Thanks,<o:p></o:p>
Sarath<o:p></o:p>Once column is for assignment and another one is for Resource.
Assignment means when you crate a task then assign that task to resource then task become assignment.
when you will create report in for Resource_skill_resource you will be able to group by or filter resource as per their skill.
As far as Resource_Skill_R_Assignment is concerned you can group by or filter assignment for resource as per their skill
Resource CUBE: The
Resource Non Timephased and Resource Timephased OLAP cubes contain resource data. These two OLAP cubes do not contain any Total fields in common, but do contain several Dimensions in common (such as Booking Type and Resource List).
Assignment: The
Assignment Non Timephased, Assignment Timephased, MSP
Portfolio Analyzer, and MSP
Project Timesheet OLAP cubes contain assignment data. Each of these OLAP cubes includes many
of the same Total Fields (such as Actual Cost, Actual Overtime Cost, Actual Work, and Actual Overtime Work) and many of the same Dimensions (such as Assignment Owner and Project List)
kirtesh -
How to add new field into dynamic internal table
Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
here i want to add one more field into <TAB> at LAST position and my
Field name = field_stype and
Field type = 'LVC_T_STYL'
could you please helpme out .Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
<fs_dyntable>, u201C Field symbol to create work area
<fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
index = sy-index.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
Set up fieldvalue
CONCATENATE 'VALUE' index INTO
fieldvalue.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
CLEAR wa_cat.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
wa_cat-fieldname = wa_flname.
wa_cat-seltext_s = wa_flname.
wa_cat-outputlen = '10'.
APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
TABLES
t_outtab = <t_dyntable>. -
How to add dynamic jquery fields into DB
I am using the script from: http://www.coldfusionjedi.com/index.cfm/2009/2/19/Using-jQuery-to-add-form-fields to dynamically add fields to a form. I am having trouble actually inserting the fields into a DB. It seems that the field name is the same each time so they just get combined into one variable. For instance, if field 1 is "John" and they add another person and his name is "Frank" field1 becomes, "John, Frank".
I have a few more fields then that, so I am unsure how to proceed. Anyone have any ideas or code samples that have worked for them? Essentially I am trying to loop through the form and insert each additional field seperately.
Any ideas?
Thanks a tonThanks for the help! I am still stuck as to exactly how this will be done. My form is as follows:
Type:
Price:
Unite:
Name:
and users can add another product etc so there will be more fields for each additional product (which all seem to get truncated as a comma seperated list in the form value)
Here is what I have so far, after the form is submitted:
<cfloop item="key" collection="#form#">
<cfquery name="insertnote">
INSERT INTO Deals (type, price, unit, name) VALUES ('#form.type#', #form.price#, '#form.unit#', '#form.name#' )
</cfquery>
</cfloop>
I honestly don't use loops like this very often so I apologize for having a lack of understanding. I know you mentioned making them nested loops but I dont' know how to do it and have it successfully insert the appropriate data. Everytime I try it doesnt come out right. -
How to add the fields into combo ?
Hi,
I want to add the table fields into combo box. Now I am able to getting the columns from table but I don�t know how to add that columns in combo box.
My jsp getting the columns from table.
function metadata(){
try {
Connection con = null;
Class.forName("oracle.jdbc.driver.OracleDriver") ;
con = DriverManager.getConnection("jdbc:oracle:thin:@10.60.4.25:1521:clopaydb","scott","tiger");
String query = "SELECT * FROM emp";
DatabaseMetaData dma = con.getMetaData ();
Statement stmt = con.createStatement ();
ResultSet rs = stmt.executeQuery (query);
ResultSetMetaData rsmd = rs.getMetaData ();
int i;
int numCols = rsmd.getColumnCount ();
for (i=1; i<=numCols; i++) {
if (i > 1) System.out.print(",");
System.out.print("\nThe Table Column list "+rsmd.getColumnLabel(i));
rs.close();
stmt.close();
con.close();
catch (Exception ex) {
ex.printStackTrace ();
}Please give me a sample code for add these items into combo. (I need JSP sample code )
Thanks & Regards,
Merlin Roshinafunction metadata(){
try {??
Are you sure on this ? Dont mix javascript function with a java method.
Make a java bean and your method may return an ArrayList.
In your JSP ..
<select name="yourComboBox">
<%
// Make a For Loop for the arraylist
String columnLabel = (String ) arrayList.get(i);
<option value="<%=columnLabel%>"><%=columnLabel%></option>
<%
} // end bracing of for loop
%>
</select>
Post your code based on the directions above then we can help you more on this if reqd.
Probably you should look up into sample JSP ..JDBC sample codes on google.
-Rohit -
Adding fields into DSO in the Key Fields
Hello Experts,
I am using a Cube which loads data from DSO. Now, for some requirement I have to add one field into DSO in the key fields Part. But DSO already has 16 fields which I cannot remove.
So how can I add one more field into DSO in this case?
The cube I am using is 0FIGL_C10 and the DSO is 0FIGL_O10.
Regards,
Nirav ShahYou can create an Infoobject - acts as a custom key to concatenate multiple fields into one and make it a keyfield.
15 fields + custom key ( concatenate 2 fields ) = 16 Keyfields
Procedure - > Example
16th Key - > RVERS-Version-CHAR-3-0VERSION
17th Key - > RMVCT-TransactnType- CHAR-3-0MOVE_TYPE
1. Create one infoobject - ZKEY - Length = 6 ( add lenghts of the two objects)
2. Make ZKEY as a keyfield for the DSO.
3. Make 16th Key and 17th Key datafields.
Create a routine for ZKEY in the transformation or transfer rules to concatenate values coming from source into one.
TRFN Routine
Concatenate SOURCE_FIELDS-RVERS SOURCE_FIELDS-RMVCT into RESULT.
Or
Transfer Rules Routine
Concatenate COMM_STRUCTURE-RVERS COMM_STRUCTURE-RMVCT into RESULT.
This way nodata will be lost/overwritten due to less number of keyfields in the DSO.
We have as many as 21 Keyfields for GL Totals DSO. -
Add fields in KOB2 & KSB2 report in selection screen as well as output
Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
RonakHi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!
Maybe you are looking for
-
Microsoft Office Home and Student 2010 Product Key doesnt work
My Microsoft home and student 2010 key isn't working. I am entering the key that was printed off the internet from Microsoft when I purchased it off the Microsoft website. I also had to restart my computer, when I went to the Microsoft website to dow
-
No. range not found for maintenance plan
Hi Team, I have maintained no. range for maintenance plan in SPRO. However I am getting this error while creating maintenace plan. Thanks
-
Video and audio latency from 6 seconds to 4 seconds
Hello, I have developed a video transmission and viewing application . I am facing a problem of one way video latency of about 6 seconds. Adobe says that the latency can be reduced to about 3 seconds one way. I have set up the buffertime for transmit
-
The sitemap Muse keeps creating everytime I publish through FTP is not acceptable. It's just creating and publishing a list of links and dates (pasting a portion of it below). Any idea why this is happening? My site is at lawtechpartners.com - I've m
-
Attempting to dowload trial of Lightroom 5 and it never "opened". I can find the file on my computer but when I try to open nothing happens?