Add field KTOSL for Transaction FAGLL03

Hello dear all,
I have added special field KTOSL in OBVU (BSEG table and field KTOSL), to be displayed in FAGLL03.
In development system everything is Okay.
But after transport to quality and production, this field exist in BSEG but does not exist for FAGLL03.
Why ?
Thanks for help
Tarek
Edited by: Tarek AYACHI on Jan 6, 2010 9:07 AM

hello Balu, hello Mamta,
Thank you for your answers.
I solved the problem by removing the customizing already made on development system and I have remake it.
Then I transported and everything is Okay now.
Anyway, i assign you points since you tried to help me on this subject.
Thank you for your time and consideration
Tarek

Similar Messages

  • Add new field in dynamic selections for transaction FAGLL03

    Hello experts,
    I'm trying to add field CPUDT (Entry Date) from table BKPF in the dynamic selections of logical database SDF.
    In fact, and referring to some hints posted in the forum, I copied the standard selection view 'SAP' to 'CUS' and then added a new functional group and then assign the field CPUDT (table BKPF) to this functional group.
    Even after saving, I couldn't see the new group I created neither the field CPUDT.
    Could you please advice?
    Thanks in advance.

    Hello
    I think you can do it by adding the field into the view (SM30): V_T021S and transport the request.
    Best regards,
    Philippe

  • Add field to the transaction variant OT43

    Hello,
    I found the following Note: 2596 but  I can't create a field in Dynpro:  SAPMF40K /8000/220 and I don't  found other options as badi, user exit, enhancement , bte, etc.
    I need to create the following field: FEBMKA-VGEXT_EL on the screens above.
    The transaction OT43 by your program uses T021Q table but  I can't modify the table or add an entry T021Q, because internally the  program   that manages the view of fields for transaction FF67, it executes statements as "DYNPRO IMPORT".
    Another consideration that the transaction OT43 only "shows possible fields"  and I can add other fields to select and add to the view.
    In other words I can select only possible fields proposed Sap to the view,  it works this way ?
    Please could you recommend a Note Sap? or perhaps more likely, a copy of the transaction ff67 and modify the new copy of the screen.
    What happens to the transaction OT43, if done the copy of the ff67 as zff67?
    Waiting for response and very grateful for the suggestions.
    The best regards,
    Gustavo

    Hi,
    Yes, it is possible to add button for the transaction SM30.
    This is possible through Menu exit.
    Procedure for Menuexit:-
    Go to SM30 ->System -> Status
    Repository data -> Transaction -> Double click on it
    Copy package name
    Go to SMOD
    Press F4 then a popup will open
    Click on information system
    Enter package name and press Enter
    Then we will get Exit
    Put cursor on that exit and press Enter
    Go to change mode and save it.
    Go to CMOD or alternatively we can use the path tools -> ABAP/4 Workbench -> Utilities -> Enhancements ->Project Management
    Specify Project name in the enhancement text box
    Click on Create icon on the application toolbar.
    Enter description for the project and save it
    Click on Enhancement Assignment button on the application toolbar
    Give Exit  and save it
    Go to Components on the application toolbar
    Double Click on MENUS001
    Write function text which we want to add to menu item and save it with an request      number
    Double Click on Exit and write code there to display menu item in the screen
    Activate the include program and finally activate the project.
    Please reward points if helpful.

  • Table and field names for transaction VB13

    Dear experts,
    Which are table-fields where the field values in table control(Mat entered, Name, Material, Description, ...) for transaction VB13 stored?
    Thanks and Regards,
    Sumit Nene.

    Thanks all!!
    I found the fields as--
    mat entered--KOTD001     MATWA
    Name     MAKT     MAKTX
    Substitute Material     KONDD     SMATN
    Short text for sales order item     MAKT     MAKTX
    Substitute unit of measure     KONDD     MEINS
    Reason for material substitution     KONDD     SUGRD
    I just didnt get the tab-field for last check box for alternative materials.
    Regards,
    Sumit Nene
    Edited by: Sumit Nene on Aug 17, 2009 1:07 PM

  • Add field GKONT in Transactions FBL1N, FBL3N, FBL5N

    Hi folks,
    is it possible in SAP Standard to add the field GKONT in the transactions (mentioned above).
    I did not find a way to add it. In Customizing there is a path in customer and vendor accounting to add additional fields, but the field GKONT can not be found.
    The customer says it would have been possible at SAP in the company he worked before, but I guess it must have been an adaptation.
    Any ideas or opinions?

    Hi Heiko,
    I woulsd post this message in FI-section of sdn forum.
    I think there are experts, who are more fanliliar with this kind of stuff.
    Good luck and a nice week end
    Joe

  • Add fields to FPCD transaction (FPB0 in 4.6)

    Hello Experts,
    In the current system (4.6) according to customer request 2 fields had been added to transaction FPB0:
    ZCREDIT - Payment type of credit card
    ANZARATE - Number of payments in credit card.
    Those fields are been updated in tables: DFKKOPKC , DFKKZP.
    The customer upgrade the system to ECC6 and  need those fields in his new system.
    Is this implementation already exist in the ECC6?
    thanks,
    Larissa

    Hi!
    Did u expand theese tables using CI_FKKOPKC and CI_FKKZP structures? If u did, they must still the same in the updated system.

  • Add field number of bill of lading for mvt. 311

    Dear guru ,
    for transaction MIGO i need to add field FRBNR (number of bill of lading)
    when I run a transfer posting within plant (mvt. 311).
    I have tried in view field selection (Enjoy) of OMJJ to add field FRBNR for mvt. 311 ,
    but in the search field lists the field FRBNR isnu2019t allowed for mvt. 311.
    Does exist a chance to add this field in field selection for mvt. 311 ?
    Thanks in advance.

    not answered

  • Use of enhancement to add field in screen

    please explain me how to add fields in standard transaction screen by using enhancement 6 in version 6.0 ?

    SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
    To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
    To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
    An append structure in the database table with the new fields.
    A subscreen area into the standard screen u2013 where the programmer can attach his subscreen of his own program with the new fields.
    A function group under which the new subscreen has to be created with the new fields.
    Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen u2013 so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
    Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
    Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
    Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
    Pre-Requisites
    The developer to work on screen exit should have essential knowledge on the following:
    DDIC concepts, including the knowledge of append structure.
    Concept of SAP Enhancements and implementing them using Projects.
    Concept of function exits.
    Knowledge on Module Pool u2013 including subscreens, Tabstrip controls etc.
    Steps
    Guidelines
    So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
    Find out the Required Enhancements
    Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton u2018SAP Applicationsu2019. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest u2013 for e.g., Purchasing, Asset Accounting, etc.
    Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
    Utilize the Enhancement in a Project
    After you have found one, do as directed in the documentation. Generally, the steps are as follows:
    Create a project using CMOD including your enhancement.
    Create the append structure with new fields.
    Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
    Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
    Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
    Activate the project.
    Test to ensure that required functionality are met.
    Case Study 1
    Add three new custom fields for Asset master and maintain information for them
    Requirement
    Three fields in the legacy system have to be maintained in Asset master. These fields are:
    Original Asset number u2013 20 characters
    Location 2 u2013 15 Characters.
    Model no u2013 20 characters
    Location 2 should start with u2018Lu2019.
    Pre-Analysis
    Finding out the Enhancement
    As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
    Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
    Studying the Function Exits
    The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
    EXIT_SAPLAIST_002
    Function module Level Documentation
    This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
    Import Parameters
    Understanding
    This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
    EXIT_SAPLAIST_003
    Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
    Understanding
    This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
    Studying the Documentation of the Enhancement
    The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
    Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
    Deciding the Final course of Action
    After making all the investigations, the final course of action was determined.
    SrlNo Step Justification
    A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
    Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
    A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be u2018CUSTu2019 (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
    In the PAI of the subscreen, validation for Location to start with u2018Lu2019 will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
    In the custom include of the function exit module u2018EXIT_SAPLAIST_002u2019, the following code will be written:-
    ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
    In the custom include of the function exit module u2018EXIT_SAPLAIST_003u2019, the following code will be written:-
    E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
    Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done u2013 otherwise, the new custom subscreen will not be displayed in the Asset master screens.
    Development
    Creating a Project to include the enhancement
    Go to transaction CMOD and create a project.
    Enter a description for the project. Then, click on the pushbutton u2018Enhancement Assignmentsu2019 in the Application Toolbar.
    Enter the name of the enhancement and Save.
    Go to u2018Componentsu2019.
    Creating Custom Include for ANLU
    The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
    Create the include structure with three new fields, as required. Then, save and activate it.
    Develop the subscreen and the program
    Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
    Create it as subscreen.
    Then, go to the Layout of the screen and create three new fields from Database table ANLU.
    Drag the fields in the screen body and place them.
    Then, save and activate the screen and come back to screen flow editor.
    Create the PAI module to add validation for field u201CLocation 2u201D, as required .
    Activate the whole function group and come out.
    Write code in the Function Exits to synchronize the programs
    Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
    Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
    Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
    Then, activate everything u2013 the whole project and come out.
    Complete the configuration to link the subscreen
    The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
    Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
    Here, the requirement is to create these three custom fields in the tab page u2018Generalu2019 of asset master screen ( AS01/AS02/AS03/AS91).
    Determine the Layout
    To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class u20181000u2019 and click on folder u2018General Assignment of Layoutu2019.
    Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout u2018SAPu2019 cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
    Create new tab layout
    Go to transaction AOLA. Copy the tab layout u2018SAPu2019 to create another layout, say, YSUB.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder u2018Tab page titlesu2019.
    You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you.
    Then, save and come out.
    Assign the new Layout to Asset Class
    Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
    Save and come out.
    Test the Exit
    Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themu2026save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
    I hope you read it all
    Thanks and Regards
    Santosh K.

  • Field Exit for IFCU

    Hi experts,
    I´m looking for a field exit for transaction IFCU for the first screen.
    Does anyone know one?
    Best regards,
    Fernando Montenegro

    Hi Pete,
    The first screen for transaction IFCU, shows two fields: The equipment we are trying to record a consumption for and a GasStation field.
    The Gas Stations we have configured have this mask: XNN, in which X: is a letter which stands for the company, for example "A" and a number NN for the GasStation belonging to the company in which we will consume fuel, for example 22.
    So the GasStation´s name is "A22".
    We wish to develop a field in which the user will only have to input the number (for example: "22"), and the system, depending on the company code of the equipment input in the first field, will concatenate the first letter of the company with the number input by the user.
    Example:
    1.User inputs Equipment that belongs to company "A". <<Enter>>
    (System reads Equipment company code, in this case "A")
    2.User only inputs "22".
    (System concatenates A+22 internally for the GasStation entry)
    3.User goes into the next screen to fuel an equipment with the A22 GasStation.
    We are trying to find a field/user exit that will do this concatenation internally in the first screen.
    I hope I gave you a good idea of what we ´re trying to do.
    Thanks a lot and best regards,
    Fernando

  • Add field WBS in OKB9

    Hi guru!
    I have a requirement to add field WBS in transaction code OKB9. How  I  can add field. thank you

    Hi,
    This is not possible to add the field WBS element in the OKB9 screen. Even if you go in the Cost Element, system will allow you to maintain Cost Center / Order as a Default Cost Assignment.
    Regards,
    Amit

  • IW31- How to add Search help for User specific fields in IW31 transaction.

    Hi Experts,
    I have to add Search help for standard fields USR00 to USR10 fields in IW31 transaction.
    Is there any user exit for this requirement.
    Please reply, it will be very helpful for me.
    Regards,
    B. V. Rao

    Bala,
    See the following user-exits:
    IWO10015: F4 Help for user fields on operation
    IWO10016: Customer enhancement to check operation user fields
    PeteA
    [www.pjas.com]

  • How to add a new field in migo transaction (header level)

    hi guru's
    can you please tell me how to add a field in migo transaction?
    i want to add a field in header data and that too under "general" tab. i dont have data regarding that field.
    and when we enter a value for that field in migo, it has to take .
    thank you.

    Hi, My problem is allmost like the one you are discussing here....
    I have appended MKPF for my Z-fields and created a sub-screen (Design the screen). I am calling this screen in PBO_HEADER. Now i can see my newly created tab along with fields.
    Now the problem is:-
    1. How I can transfer that data entered in screen fields back to my BADI.
    2. How to update my z-fields in MKPF table along with standard fields. I have tried using FM - 'J_1IEXGM_BADI_POST_DOCUMENT' in Method - POST_DOCUMENT, but its not updating table record in MKPF for Z-Fields.
    Please advice.....
    Thanks

  • Add field from structure maintanace option for datasource in LBWE (BI 7)

    Hi,
    while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
    but when we try to add extra field not by structure maintanace option in LBWE but form append structure option from that structure MC02M_0ITM ( that field is not in that maintanace option in LBWE) than it comes in that structure MC02M_0ITM and also can see in RSA2.
    Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
    Best regards,
    dushyant.

    It solved automaticaly,
    yes later i got that error entry still exit whic solved by deleting setup table and than try,
    thanks.
    one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
    Best Regards,
    dushyant.

  • Add Fields from table ADRC (Fields Name 1 to 4) for Open Item Processing

    Hi SAP Expert:
    Our client requires vendor/customer name to be displayed in the open item processing line layout for transaction code f-58, so they can double check if the vendor name is complete as intended. 
    We intend to add fields from table ADRC instead of REGUH since the characters in maintaining vendor/customer name is 40 characters and REGUH - ZNME1s are only 35 characters. 
    We have managed to add fields from ADRC and change the SAPDF05X program and were able to display the names in open item layout, except that the program seems to "automatically" create a generic table which only carries 30 characters of the vendor/customer name.  The source table should be RFOPS_DK but the program automatically looks up from table RFOPS_GEN for the particular fields - Name 1 to 4.  Is there a way to "instruct" the program to use RFOPS_DK instead of RFOPS_GEN?
    Hope this will merit somebody's attention... Thanks !!!

    Thanks,  i have assigned the layout via o7v3,  it is the program that i have a problem with,  actually another program that we change is the program MF05BFPO where it generates data to be displayed in the FBZ4 screen,  though we add a field with 40 characters (ADRC Name 1 to 4)  what the program dispalys is a 30 character Name1 to 4 from structure RFOPS_GEN. 
    My question is can i extend/change the structure RFOP_GEN to 40 characters,  is there any SAP standard program that will aftected if i do so?  thank very much...
    Lorena

  • How to add a field in FV60 transaction ALV

    Hi,
    I want to add a new field in FV60 transaction, I know that it can be done adding a new screen variant is this right? and how do i do this? What I exactly want is to add a field in the Table Control Named "Distance" and it should be type character with 12 positions, how can I do this?
    Thanks!!

    u have to search for a screen exit to implement the field in the screen of LT31. then u have to write ur code to upload to the zcode in the same exit..

Maybe you are looking for