Add field to dynpro
Hi all,
I have added a new field to the table LAGP,
now I want to add this field to the screens at TC LS01N, LS02N and LS03N.
I know these are the same Dynpro (nr. 400) in the programm SAPML01S in the package LVS.
But how do I add the new field to the Dynpro?
Greetings Fred.
You should either find a extension for the Dynpro or modify the standard...which i just don't recomend...Maybe, someone else can give a better answer -:)
Greetings,
Blag.
Similar Messages
-
Hi all,
I have added a new field to the table LAGP, now I want to add this field to the screens at TC LS01N, LS02N and LS03N. We are on Ecc6.
I found no BADIs for this tcode. closest i got was enhancement MWMRF400, but this looks more of a RF stuff.
But how do I add the new field to the Dynpro?hI,
here's a blog intro to RFID.
/people/steve.winkler/blog/2006/05/03/an-introduction-to-rfid
Please check the links for details
http://service.sap.com/instguides -> SAP Components -> RFID-Enabled Supply Chain Execution -> Using SAP Auto-ID Infrastructure 4.0
Business Scenario Descriptions and Configuration Guides
http://service.sap.com/scm -> RFID -> Detailed Information
http://www.smartcardalliance.org/pages/publications-rf-enabled-applications-and-technology
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c444f8e8-0d01-0010-4d9b-c6ff68e64519
Refer below therd u can find the material
https://forums.sdn.sap.com/click.jspa?searchID=4324148&messageID=1826923
Regards -
Add new fields in F-36 ( Add customer item dynpro ) .
Hi all.
I want to add new fields in "Add Customer item" Dynpro of transaction F-36. It's possible ???. How I can do this ??
In the "More Data" dynpro is possible to add new fields ????
Thanks a lot
IsmaelHi
Sorry...I wanted to say I want to add a customer fields of table BSEG.
Only I want to know if it's possible to add some fields in a f-36 trx.
My users want to fill a new fields when they create new bill of exchange ( in dynpro "add customer item").
thanks -
Add field to MSS General Information
Hi experts,
I'm trying to customize the iviews in MSS > General Information to add fields to the iViews. Thus, I need to identify what are the function modules they are calling. However, when I open sap.com/mss~eepro/ Web Dynpro component in NDWI, I could not see any model! Can anyone explain to me how does this application work then if it has no model to store function modules?
THanks,
ZmHi,
if you have access to ECC System go to transaction ST05 and run the trace with the user who is having access to run the iView. after it is on go to portal and run the General Information iView. after executing that go back to ECC system and switch off the analysis and see the RFC trace.
it will show all the Function Modules that are called when executing the iView.
and it is better if we don't make any changes to the standard FM and instead use the custom FM to add the fields, since we did the same sought of development using custom fm.
creating a model and making changes to the application.
Hope this helps.
Cheers-
Pramod
reward points if helpful. -
Add field to the transaction variant OT43
Hello,
I found the following Note: 2596 but I can't create a field in Dynpro: SAPMF40K /8000/220 and I don't found other options as badi, user exit, enhancement , bte, etc.
I need to create the following field: FEBMKA-VGEXT_EL on the screens above.
The transaction OT43 by your program uses T021Q table but I can't modify the table or add an entry T021Q, because internally the program that manages the view of fields for transaction FF67, it executes statements as "DYNPRO IMPORT".
Another consideration that the transaction OT43 only "shows possible fields" and I can add other fields to select and add to the view.
In other words I can select only possible fields proposed Sap to the view, it works this way ?
Please could you recommend a Note Sap? or perhaps more likely, a copy of the transaction ff67 and modify the new copy of the screen.
What happens to the transaction OT43, if done the copy of the ff67 as zff67?
Waiting for response and very grateful for the suggestions.
The best regards,
GustavoHi,
Yes, it is possible to add button for the transaction SM30.
This is possible through Menu exit.
Procedure for Menuexit:-
Go to SM30 ->System -> Status
Repository data -> Transaction -> Double click on it
Copy package name
Go to SMOD
Press F4 then a popup will open
Click on information system
Enter package name and press Enter
Then we will get Exit
Put cursor on that exit and press Enter
Go to change mode and save it.
Go to CMOD or alternatively we can use the path tools -> ABAP/4 Workbench -> Utilities -> Enhancements ->Project Management
Specify Project name in the enhancement text box
Click on Create icon on the application toolbar.
Enter description for the project and save it
Click on Enhancement Assignment button on the application toolbar
Give Exit and save it
Go to Components on the application toolbar
Double Click on MENUS001
Write function text which we want to add to menu item and save it with an request number
Double Click on Exit and write code there to display menu item in the screen
Activate the include program and finally activate the project.
Please reward points if helpful. -
How to add fields to already loaded cube or dso and how to fill records in
how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?
This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382 -
How to ADD field in iview ?
hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, MartinGopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin -
How to add fields to Structure in Report Painter
Hi All,
We have a requiremnt where we need to add 2 fields ( profit center-PRCTR & description-CEPCT-LTEXT ) to structure CCSS. This structure is attached to library 1VK.
Is it possible to add fields directly to a structure or do I need to create a new structure and attach it to a new library.
If any one of this is possible, how can I do this ?Hi ,
u can do it in both the ways , but i am not much sure abt second option.
Useful Tcodes are GR21.
Regards
Prabhu -
How to add fields in a z table
hi experts !
i have to add a new fields to an already existing Z table. how can i add field? do i have to delete all other entries and create new ones so that the entry in the new field also gets created.?
akankshaHi,
You have two options to enter data type while creating new field in table.
1. User standard data types i.e. mandt, kunnr etc..to use it u need to press "Predefined type" button present on top of table fields.
2. User custom data elements...this data elements you creates when you want to have data field specified to your required length.
Hope this will help.
Sumit -
Add fields to Existing DSO and DS in R/3
Hi Friends,
I have got to change my LO datasource which is running on production, 2lis_va_vatim, i need to add 2 fields to the exisitng DS from Comm Stru, so could anyone point me inthe right direction, Hoow to Add the fields with out disturbing the production,
and the same way i need to cgane my DSO aswell for new fields, please tell me how to meet this.
Thanks,
Kiran.Hi Kiran,
Before applying your changes in Production do the below steps:
1)run V3 job as immediate, which picks data to delta queue and delete the acive V3 job.
2)run the IP which loads data to BW(Delta IP).
3)Apply your changes to the 2lis_va_vatim and DSO.
i)Do the changes(adding your fields to 2lis_va_vatim and DSO)in DEV and active the 2lis_va_vatim and DSO.(insert this in transports).
ii)first apply the R3 transport and then BW side.
4)from now on wards your 2 fileds will get populated in BW side.
5)Maintain the V3 job for 2lis_va_vatim in R3.
If you need any clarification how to add fields to 2lis_va_vatim and create transport req pelase check the below article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
Hope this helps.
Regards,
Venkatesh. -
Add fields in KOB2 & KSB2 report in selection screen as well as output
Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
RonakHi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you! -
How to add field to the header for FBL5N ALV report
Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
SwapnaYes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna -
Can you add fields that are manually maintained.
I'd like to be able to add fields to my MAP Toolkit's inventory. For example, adding Asset and Warranty fields, to keep track of this information. I'd be maintaining the data manually, which is fine since it doesn't change very often. Is there a way to extend
the toolkit to include these types of fields?
So far the only solution I've been able to think of is to generate reports, convert the .XLS to .CSV, and then use PowerShell to merge the .CSV with a file containing the static information. This would be quite an undertaking as I'd need either different
scripts, of different logic paths, to deal with the multiple reports available from the toolkit.
Thanks
Jim WinnerThe reports are generated using queries that are in stored procedures. I suppose it would be possible to modify the query so that extra columns would be created, but I don't know how you would get the data into MAP.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread. -
How to add fields in custom infotype and update its screens
Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fieldsGo to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype -
How can i add field to screen exit ?
ver 4.7
trans. me21n
add field in screen exit .
i implement screen exit MM06E005->SAPMM06E->0111
in the layout i try to add field by pressing
button in the toolbar ( dictionary field window ) ,
but when i press "save" in me21n ,
i get message "No data changed".
i choose in the dialog window
field from structure "ci_ekpodb" , field that i already
been add .
thanks .Hi
You have to implement the exit to import/export the data into/from screen-exit:
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
Max
Maybe you are looking for
-
I went I to my phone and I tried to unlock my passcode but it did not let me in, how can I reset my lock passcode without plugging it onto the computer on iTunes, or restoring it or deleting any data ?
-
Is the wireless keyboard compatible with windows?
I have recently used one of the stunning keyboards on a mac system and i desperately want one. Just before I buy one I wanted to make sure that it is compatible with windows. Plus do I need to buy a bluetooth receiver thing or is there one included i
-
Is java interpreted or a compiled language.
Im confused all languages aare compiled arent they? C++ is compiled into binary, then its ready to execute. Java compiled into bytecode and then interpreted bt the JVM, then passed into binary and run? Is this right anyone got a definitive answer? Ch
-
Which study guides are good for 10g oca?
is there a link where they are compared? last time I used ucertify, but I was disappointed, as in ucertify I was scoring around 95% whereas in the real exam I just about passed.
-
DW5 keeps crashing after update to 11.02 build 4916 Windows 7
DW5 was working fine on my Windows 7 64bit machine until I let it update to version 11.02 build 4916. It has started crashing every time I open it. Any help would be appreciated. Thanks, Ed Problem signature: Problem Event Name: APPCRASH Applicatio