Add field to screen 0311 in SAPMM06E

How do I look to find a screen exit or badi to add a field to screen 0311 in transaction ME42.
Or does anyone know offhand whether it is possible to enhance that screen at all?

use the below enhancement
MM06E005...here u can find the screen exit what u said....
how to find screen exit....
goto smod t.code.
press f4 in enhancement field...
u will get one popup there
     in that give the package name...
     and click the button all selection (which is present near settings and cancel button)
     there u will find checkbox screen exit just click that alone and press enter
here u will find the list of screen exit

Similar Messages

How can i add field to screen exit ?

ver 4.7
trans. me21n
add field in screen exit .
i implement screen exit MM06E005->SAPMM06E->0111
in the layout i try to add field by pressing
button in the toolbar ( dictionary field window ) ,
but when i press "save" in me21n ,
i get message "No data changed".
i choose in the dialog window
field from structure "ci_ekpodb" , field that i already
been add .
thanks .

Hi
You have to implement the exit to import/export the data into/from screen-exit:
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
Max

Use of enhancement to add field in screen

please explain me how to add fields in standard transaction screen by using enhancement 6 in version 6.0 ?

SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen u2013 where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen u2013 so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool u2013 including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton u2018SAP Applicationsu2019. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest u2013 for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number u2013 20 characters
Location 2 u2013 15 Characters.
Model no u2013 20 characters
Location 2 should start with u2018Lu2019.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be u2018CUSTu2019 (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with u2018Lu2019 will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module u2018EXIT_SAPLAIST_002u2019, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module u2018EXIT_SAPLAIST_003u2019, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done u2013 otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton u2018Enhancement Assignmentsu2019 in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to u2018Componentsu2019.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field u201CLocation 2u201D, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything u2013 the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page u2018Generalu2019 of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class u20181000u2019 and click on folder u2018General Assignment of Layoutu2019.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout u2018SAPu2019 cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout u2018SAPu2019 to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder u2018Tab page titlesu2019.
You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themu2026save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
I hope you read it all
Thanks and Regards
Santosh K.

Add fields in Screen standard

Hi,
Do you know if it is possible to add at transaction VL10 the possibility to have the 'Delivery Type' field?
How i can add these field to the screen in VL10. Do you know if this is possible?
Thanks in advance
Best regards

Hi!
Because the VL10 is a list of the CUSTOMER ORDERS, without delivery, you can't have a field here, which contains delivery data.
Delivery type is determined, when you create the delivery, after the run of VL10.
Regards
Tamá

CS -Depot Repair User field header screen

Hello ,
I want to include user defined field in RMA sub-tab of SM03 order type.. This user defined field is "Serial number".We are creating a service order for a serial number. Currently I can view serial number in object list .We want to include this serial number field in RMA sub-tab. Is this possible.
I think from this exit IWO10018 it is possible to include fields & screen.But it is visible as seperate tab "Enhancement" appearing on last in order tabs.Am i right.
Regards,

Go through this link. This link has explained to add field using screen painter for VA01 entry screen. Instead of program SAPMV45A, enter the program SAPLCOIH (for IW31 header screen). Check with ABAP people for further clarity.
http://www.sap-advisor.com/abap-coding/how-to-add-a-custom-field-using-the-sap-screen-painter/
http://wiki.sdn.sap.com/wiki/display/ABAP/NewfieldListdisplayatIW38orIW39whenactivatingscreenexitatIW31MaintenanceOrdercreate

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

How to Add field to Selection screen of Tx. FBL5N

Hi All,
In Tx. FBL5N, there is a field Customer number (on Customer selection screen).
In addition to the above we need to add field Customer name in Selection screen.
How do we go about it ?
PS :- We have found steps to add fields to FBL5N output. But, we dont want it on output, we want to add it on Selection screen.
Regards,
Ashish

Hi,
Only certain table fields are allowed in dynamic selection, please see this sap note for detail :
Sap Note 310886 - Line items: Dynamic selections ignored
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
So BKPF-CPUDT field is not allowed for dynamic selection.
check this thread Add new Fields to Dynamic Selection FBL5n
Or
Enhancing Selection Views in the dynamic selection of some SAP transactions like FB03, FBL3N, FBL5N
This enhancing related to SAP OSS Note: 188663 and 832997
Requirement: The business requires the Doc. Header Text be added in the dynamic selection in SAP transactions FB03
■Execute Transaction code SE36. Click F4. Enter the SAP table name wherein you think the field could be found. In this case the SAP table is BKPF and the logical database is BRF
■From the initial screen of SE36, Choose from the path EXTRAS >> Selection Views
■Copy Selection View u201CSAPu201D to u201CCUSu201D
■Change the selection views u201CCUSu201D
■In the right corner, double click your table BKPF.
■In the right corner, check whether what functional groups does your field belong. If it is 01 then input it beside your field name.
■Then Save it afterwards.
Prabhudas

Add field in listing/exclusion selection screen

Hi, expert, i have create a condition table for my listing type Z001. there is a field name ZZABCD in the condition table. In VB03, I can see the conditon table in 'Key combination'. Now i want to add the field into the selection screen when i click the button 'Condition info' in VB03. Please advice. Thanks.

Dear Rick,
go to OV06, there select the table in which you want to add field. And then select the Add Field and search and add your required field.
Also,
while assinging accesses to access seq., select the table you want to add against the access seq. and in that table, add the newly created field. And finally save.
There is no need to change other setting as you want to add only the field.
Now try the field should be displayed
regards,
Sagar

Add field group to Asset Master Data Screen Layout

Hi Gurus !!
Does anybody know how to add field group in SPRO(Define Screen Layout for Asset Master Data)?. I have created my layout by coping 1000, but then I need to add Fund Center in Time-Dependent data logical field group.
Thanks a lot,
Sasha

I don't think you can add a funds center to the Time dependent tab.
Instead you need to use Derivatuon strategy. Use tcode FMDERIVE for strategy and FMDERIVER for GL accounts to cost center and cost centers to asset numbers or number range. From here the system derives teh funds center.

How to add a search help on a screen field from screen painter

Hi,
I would like to add an existing Search Help on a screen field in Screen painter.
Of course it's possible to just click on th screen field and in the property box, I just have to set the name of teh search help.
The problem is that I need the screen field to be grey and user musn't be able to change the field value if he doens't use the search help.
I'm not allowed to modify the existing search help or to built it on my own from source code, I must use the existing one.
Do you have an idea on how to do so?
Regards,
Morgan

Dropdown Box:
In the screen painter for that field goto properties -> Dropdown ->select listbox.
Option 1:
Instead let that field be in change mode and if user enters any wrong entry which is not there in the table give a error messgae.
CHAIN.
    FIELD addr1_data-country.
    MODULE modify_screenfields1.
ENDCHAIN.
MODULE modify_screenfields1 INPUT.
CASE sy-ucomm.
    WHEN 'ENTER' OR 'EXECUTE'.
      IF NOT addr1_data-country IS INITIAL.
        SELECT SINGLE landx FROM t005t INTO lws_landx WHERE
                                      land1 = addr1_data-country
                                  AND spras = 'EN'.
        IF sy-subrc <> 0.
          MESSAGE e000(zo_spa) WITH text-022. " Invalid Country code
        ELSE.
          t005t-landx = lws_landx.
        ENDIF.
      ELSE.
        CLEAR: t005t-landx.
      ENDIF.
   ENDCASE.
ENDMODULE.                 " modify_screenfields1 INPUT
Option 2: Other than if u want the way u like, let that field be greyed out. don't attach the search help.
In the PROCESS ON VALUE-REQUEST.
FIELD addr1_data-region MODULE region_pov.
MODULE region_pov INPUT.
Using the F4IF_INT_TABLE_VALUE_REQUEST table value request show the search help.
also make that field input enabled.
ENDMODULE.                 " region_pov INPUT
I think this will solve ur problem.
Regards,
Prakash.
Message was edited by: Prakash Ramu

HOW to ADD F4 help to a field on SCREEN (MODULE POOL)

Hi,
     How to add f4 help to a field in screen ..plz help
Regards,
Saleha

Hi Saleha,
                In order to add F4 help to a field in modeule pool follow these steps:-
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname     = 'BKPF'
      fieldname   = 'BUKRS'
      dynpprog    = progname
      dynpnr      = dynnum
      dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
    FROM BKPF
    INTO CORRESPONDING FIELDS OF TABLE it_doc1
    WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'BELNR'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'TXT_BELNR'
            value_org   = 'S'
       TABLES
            value_tab   = it_doc1.
ENDMODULE.                 " VALUE_BELNR INPUT
Hope you find this information useful, let me know.
Regards,
Aditya.

Add field not showing in contacts edit screen

Trying to add nick names to the contact list in IPhone 6, but the "add field" prompt is not showing. Tips?

Well first of all PL10 has some addon-issues (I don't think they affect Screen Painter since that is only UI-API but I would not recommend it...)
Regarding the problem...
What you should try to do is go to "C:\Program Files\SAP\SAP Business One" (Perhaps "C:\Program Files\SAP Manage\SAP Business One") and delete or rename files "AddOnsInstall.sbo" and "AddOnsLocalRegistration.sbo".. These files controls installed addons on the client, and if you remove them the addon will try to reinstall the addon...
Also try to go to %temp%\SM_OBS_DLL and delete/rename this as well... Controls versions of the SDK and there might be some left-overs from older versions
If that not work try to go to the SARI table in the SBO-Common and delete the record regarding the Screen Painter
If all the fails the old trick to uninstall the SDK, DI-API and client and reinstall them again sometimes solves the problems... (I know... Lots of things can go wrong in SBo and I've seen most of them)

Enhancements to add fields to purchaseorder

hi,
how to Enhancements to add fields to purchaseorder in ME22 transaction using enhancements MM06E005. What is the MM06E005. plz explain.

Hi radha krishna ,
MM06E005 is the enhancement number in which we have fuction module exits and sceen exits where you can add customer specific fields to the PO ie Me22 in the screen exits available in the MM06E005(Customer fields in purchasing document) enhancement number.
first go to CMOD(Transaction code)>create an enhancement project>click on enhancement assignment button on application tool bar and in enhancement colum give MM06E005 enhancement number and then click on components you will get all the fuction module exits and screen exits.
fuction module exits:
EXIT_SAPMM06E_006.
EXIT_SAPMM06E_007.
EXIT_SAPMM06E_008.
EXIT_SAPMM06E_009.
EXIT_SAPMM06E_012.
EXIT_SAPMM06E_013.
EXIT_SAPMM06E_014.
EXIT_SAPMM06E_016.
EXIT_SAPMM06E_017.
EXIT_SAPMM06E_018.
screen exits TO ADD CUSTOMER FIELDS TO THE PO CREATION SCREEN.
SAPLXMO6 0101.
SAPLXMO6 0111.
SAPLXMO6 0201..
SAPLXMO6 0211..
SAPLXMO6 0301..
SAPLXMO6 0311.
select apppropriate exit to add the fields according to your requirement.
Thanks and Regards,
Pavan

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

Add field to screen 0311 in SAPMM06E

Similar Messages

Maybe you are looking for