Add firmware update to increase resolution to 4K

I would like to see a new firmware update that would increase my WDTV Live HUB's HDMI resolution to 4K and update codecs by adding new H.265 codec for HD and 4K/UHD resolutions.

Won't happen. HEVC support can not be added by way of a firmware upgrade.

Similar Messages

MEGA STICK 520 Firmware update?

Hi, well I´been searching and reading this forum for quite some time and I haven´t found answers to this questions and I though that maybe someone did, so here it is:
I own a MEGA STICK 520 and I found a firmware update MS5520v0.2.0_FW.zip (2005-8-17) but I want to know exactly what does it changes, so if someone did the update, what does it do? And did you have any problems installing it? because I´ve read too many threads about players dying or allmost.
Is it the first firmware update? cause aparently for what i´ve read a lot of firmware with problems were solved with new versions.
Thanks in advance,
Bherno
Ps: sorry for my english, i´m from argentina. and please don´t answer me "just do it man!", because it cost me a lot of money and i can´t afford to kill it. I have two good reasons for doing the update, it´s really annoying that the player starts reproducing an album in the middle when it is prefectly organiced (in fact if you go manually to the first track it will play perfectly fine), and that the volume increases exponentialy.

The latest firmware feature is more little bug, thus please update the latest F/W (v0.2.0)!!
Update items is as follows:
1. Fixed bug: When manage “playlist” and power off, after power on “playlist” will be disorder.
2. Fixed bug: The file name will be cut under “playlist” mode.
3. Fixed bug: When didn’t use a long time, the screen wasn’t display.
Please do according to firmware update procedure of the following:
Mega stick firmware update process:
1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=605)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5520)
3. Please press sustained “play key” first (While mega stick can't be recognized by PC please add this procedure), then plug your mega stick 520 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5520" update now!!!
5. As you update firmware that you can select "format data area" and after update success, you can release of your finger. (While mega stick can't be recognized by PC please add this procedure)
Please note: While mega player can't be recognized by PC, please don’t put battery with update firmware.
Hope to solve your doubt!!

Does anyone know how to solve: "Firmware update failure. Disk write error"?

Hi all,
Here is the list of all what went wrong and where I am now:
1. My Ipod worked well
2. I wanted to update it, you know, the normal thing with Itunes
3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
4. I took my external drive (where my music is) at work and tried again: same result.
5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
Thank a lot for your answer

Hi Cyrille,
Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

WAP4410N wireless traffic locks up even when running latest firmware update

I maintain multiple buildings, and each building has anywhere between 1 and 4 Cisco/Linksys WAP4410N access points. The problem is that at random intervals, the access points just stop sending and receiving wireless traffic. Every day or two, I have to log into every single access point (either via HTTPS or SSH) and reboot them in order for them to start working again.
In short, here are the config details:
They are all version 2 hardware (either WAP4410N-A V02 or WAP4410N-E V02).
They are running IPv4 (IPv6 is disabled) and get static IP addresses via DHCP.
When there are WAPs with overlapping signals, each WAP is on a different non-overlapping channel (1, 6, or 11).
Each WAP has two SSIDs (with spaces in their names). One is secured with WPA2. The other is unsecured.
There are two VLANs on the Ethernet interface. Each of the two SSIDs are assigned to a separate VLAN.
There is a DHCP server on the network, so the WAPs do not actually assign IP addresses to clients.
All of the WAPs are running on PoE switches. However, some are gigabit and some are 10/100 switches. Brands vary (Dell and Linksys) and models vary.
Cisco finally recognized this issue as:
CSCtx62203—In certain environments and traffic model, the WAP4410N may lockup after some undetermined time. Workaround: Reboot the device.
As such, the workaround didn’t really offer anything new. Rebooting every WAP ends up being a very time consuming process. It’s awful. And since you have no control over when this issue surfaces and can’t put any safeguards in place, I get calls about it at various points of the day almost every day.
Supposedly the most recent firmware update (2.0.6.1) claimed to fix the issue, but it only seemed to make it worse. So now instead of a WAP locking up every day or two, it locks up anywhere between every 15 minutes to 4 hours when in use.
The firmware was updated and the following issue was fixed in firmware version 2.0.6.1: CSCtx62203—In certain environments and traffic model, the WAP4410N may lockup after some undetermined time. (A protection mechanism was added to guard against sporadic problems with client association that could occur after six to 24 hours.)
As for troubleshooting, there are no error packets. On access points running firmware 2.0.6.1, these messages appear:
Feb 7 13:42:27 Syslogd start up
Feb 7 13:51:59 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 13:52:01 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 13:52:05 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 14:47:01 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:47:02 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:47:05 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:22:53 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:22:56 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:15:19 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 16:15:33 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 12:27:25 Syslogd start up
Feb 7 14:06:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:06:23 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 14:44:28 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:44:31 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:09:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:09:24 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:42:23 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:42:25 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:52:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 16:52:24 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:53:05 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:20:05 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:20:08 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 17:23:34 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:23:39 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 21:21:28 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 21:21:30 syslog: Found beacon stuck, down and up the VAP interface.
Feb 8 09:55:23 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 8 09:55:29 syslog: Found beacon stuck, down and up the VAP interface.
These log messages appear on both WAP4410N-A V02 and WAP4410N-E V02 devices.
I noticed that when the “beacon stuck” message appears, wireless traffic locked up 10-15 minutes prior to the message’s appearance in the log, and the SSID drops for 4-6 minutes after the message appears.
Is there anything that can be done to address the issue?

1) LAN port speed doesn't appear to have any effect
2) Forcing a connection type doesn't seem to have any effect. This is also rather impractical.
3) I don't have that option (though there is a TKIP/AES mixed option). Either way, I'd rather not have to resort to using a weaker encryption method.
4) No effect.
I did manage to find some information about the error message (older versions of firmware didn't even offer that clue).
http://www.dd-wrt.com/wiki/index.php/Advanced_wireless_settings#Beacon_Interval
I ended up increasing the beacon interval from 100ms to 500ms under Wireless > Advanced Settings.
The wifi analyzer app on android seems to keep dropping the SSID when the beacon interval is set that high, so I might have to adjust it to find a good balance.
However, while it was set to 500ms, none of the access points went down for two days.
[edit]: I reduced the beacon interval incrementally down to 300ms. It started locking up at 250ms.

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Latest firmware update killed my network, HELP!

so.. I updated the firmware about a month ago when it was first available.. My device is completely stock and i'm not really ready to root nor factory reset it. I reset it before due to an error on the backup assistant screwing with my external sd card (the real issue was the copy and paste error some devices were faced with). I've been through about 4, 32gb externals and the latest sandisk just sent me.. is bad too. :/
But, that's not the issue i'm getting at. Since the lastest firmware update with caller ID, etc.. I've had little to no signal, dropped messages in my house, completely dropped 4G LTE while using GPS.. horrible due to some areas I was in.. slow or lagged device to the point where i've had to restart my device 3-4 times each day in the last week...
Can someone either tell me if there is a quick solution to this or what the next step should be in this process. because this whole "we've retracted the update but are looking into a fix" ** isn't very settling. Since, on Verizon's time.. I'm afraid the next update won't come for a few months..

I am having the same issues described by everyone else (dropped 4G, worse signal, etc.) after the update to MD3.
My wife's phone is identical but without the update and it works fine (like mine did before the update)
WHAT is the resolution to this issue, Verizon? I really don't believe I should have to go down the root-my-phone route and find third party sources to fix this issue. Why can't you just push the old firmware back to my phone?
I am quite disappointed that what was my best smartphone experience to date has been ruined.

Firmware Updates in North America (NAM devices) - ...

After reading the UK campaign for equality post - I thought I'd start one for us North American folks.
As a loyal (but now beginning to waver) owner of Nokia devices since 1998.. it's always been a sad state of affairs in terms of upgrades, and getting new devices, especially compared to the rest of the world, PERIOD.
While I realize that our phones may require a slightly different chipset because of the odd ball frequencies that our areas use - there is no sane or logical reason why we get shafted on model firmware updates otherwise. While I do not have a hardware engineering degree - I cannot see why the primary functions of firmware updates cannot be easily ported over to the NAM versons of Nokia phones.
While a lot of you out there have valid complaints (like the UK) in release time - and do eventually get them. We in the NAM market have been consistently.. well, screwed, is the only way that I can think of it. I have consistently made it a point to buy Unlocked and unbranded devices DIRECTLY from Nokia USA so that I can have flexibility and know that I will eventyally, hopefully,get some sort of update.
With all the new N and E series devices that I have owned - N95-3, N85-3, E75-2, E65, N79 come to mind - we have been consistently, and systematically been delayed as candidates for firmware releases. Example: N95-3 - The was launched as a FLAGSHIP device. All OTHER versions of the N95 got and received a v30 upgrade - the n95-3 didn't even get it as a possibility until almost 7 months later!!! E75 - a lot of you got the v200 upgrade and things work perfectly - I should know - I have a friend who has a E75-1 handset, and we compare notes and see how sad and slow my device is! We're still on v110! N85 - the same way, MONTHS later. It goes on and on.
I mean, if you're NOT going to support a device - that's fine - just TELL us upfront. Don't tease us with versions of firmware for other practically identical devices - and then have your North American support counter parts completely clueless as to any news whatsoever. If you're not going to support the product with firmware updates - just tell me, and I'll make my decisions to purchase, or not, accordingly.At least with other mobile manufacturers - I know there is a set steady time frame of support and so on.
What's even worse than the tease with the other versions of firmware, is the NokiaUSA site itself. You go there, and you see that OH - hey! There's apparently a new version of firmware available for my device on the 'pretty' pages that allow you to select your device. *BUT* whenever you type in a NAM device code on the actual check page - it's never available at the same time as the rest of the family of devices. Heck, we're lucky if we are only 1 revision behind for most, if not all, devices! If you're not going to give us the updates - then make sure your localized website doesn't even mention it! This false hope is the worst wound of all!
And yes, I do realize that Nokia does not have the market share in the NAM market as it would like - but helping us 1st adopters to have wonderful working devices is probably your best form of advertising to people who've never even seen the devices before! I don't know how many of my friends and colleagues have bought Nokia devices because they see how well they CAN work as compared to what they are used to! You want market share? well, help us, to help you!
North American users please chime in and add kudos to this if you feel the same way!

Nokia Senior Managers,
I want to help you. So do all the other customers on this site. The 5800 is the best phone on the market, but it needs the updated firmware (v.4) in NAM as soon as poosible.
Other suggestions (places you are doing well and need help).
Doing well - maps (on-device with GPS is much much better solution than wireless network based only - MARKET this fact, where is the advertising??) and push e-mail. You should make the push e-mail free for life on your smartphones, like you did with maps (then market along with free mapping). This would eliminate Android and Blackberry given the technology and price point.
Need more work - ease of set-up, user interface, music, and apps. All of these need to be improved to take on Apple. It took two full days to set up my phone (before installing music). That is way too long. Everything is convoluted, like it was developed on Mars. This could be one CD that comes with the phone and make everthing easy, or just pre-loaded so you can turn-on and go. The touch screen user interface is ok, but could be much better (more homescreen choices, etc.) Regarding music, don't try to sell, just make a simple pass-through that works well, leave selling (or sharing) music to others. (maybe buy MediaMonkey and incorporate to have a good universal music management program) Regarding apps, this is moving in the right direction, but you need to do more. More apps, make them free, and partner like crazy with media companies, U.S. universities (who are developing for all other smartphones except Nokia through Blackboard, etc.), and any other company/organization that has a cool app. This is the sizzle, which in the U.S. sells more than the steak.
Good luck and let us know if we can be of assistance.
Loyal Nokia 5800 User

Just did a Firmware Update and can't receive or send mail

I just did a firmware update as recommended by Apple:
2008-04-13 18:30:24 -0400: Installed "Aluminum Keyboard Firmware Update" (1.0)
2008-04-13 18:30:32 -0400: Installed "iMac EFI Firmware Update" (1.3)
I had restarted my iMac and noticed that my Mail 3.2 will no longer connect to my mail servers and send or receive mail.
My internet connection is fine when using my browser. I closed and restarted "Mail" and this didn't help and even restarted my computer but that didn't help either.
Anyone else that just did this update have a similar issue? Anyone know of a fix? I don't think I can undo the Firmware update now, so what do I do?
Thanks

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Delete and re-add the email accounts.

Airport extreme firmware update screwed up my IP sharing and internet

I am having all the same problems -
1) I upgraded to the 7.1 firmware
2) I got the 'double NAT' error, but no problems connecting to the internet
3) When I turned the bridge mode to off, I lost my internet, so I
4) Tried to turn the bridge mode back to Share an IP address, but got an error about IP addresses.
5) I went into Setup - the network port mapping tab - and unchecked and then re-checked the Airport button, so now I have internet access, but only at one computer, and if my computer is functional, my VOIP modem is not (or vice versa)!
6) when I tried going back into "Share an IP address", I got the same error about the beginning and end DHCP conflicting with my WAN.
(If it helps to know, I have two AEBS - one is set up as the Main WDS station, and the other Participates in that WDS)
Now I'm afraid to touch anything!!

kayek wrote:
I have installed the new AirPort Extreme firmware update (7.4.1) and with airport disk utility i want to connect automatically my hard drive related to the airport (wifi mode) , the connexion was working well before that update and now i have an error message (unknown user or wrong password error -36 ...) when the disk tries to connect automatically.
I would like to rollback to the 7.3.2 firmware version but there is no way to find it on internet (or on apple download) even if i change rollback airport utility to version 5.4.1: the binary firmware 7.3.2 disapeared from my mac and i can only choose 7.4.1 binary file ...
Do anyone have the same problem ?I you found how to fix it please answer my post (thanks)
Ok, here's how you actually do the downgrade - here's what Apple says, not exactly right - I would add that you HAVE to go to the MENU, choose BASE STATION, then hold down the Option key while pressing UPLOAD FIRMWARE, this will get you to a window that has the dropdown with older versions....the other versions were not available to me any other way.
{quote}If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?
1. Open AirPort Utility.
2. From the AirPort Utility menu, hold the Option key (Control key in Windows XP and Vista) and choose Check for Updates....
3. Select the specific firmware version you require.
4. Click Download.
5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.
6. Choose Base Station > Upload Firmware.
7. Select a firmware version and click OK.{/quote}

LaserJet M1217nfw won't do wireless printing from iMac 10.7.5 after HP firmware update

My LaserJet M1217 worked perfectly until I did the recent firmware update. Now it's a brick. I called tech support, was on hold for nearly an hour, got offshore folks who kept me on even longer with marketing hoo-hah, and finally told me that the mfp was no longer under warranty and they wouldn't help unless I paid. I explained that the problem was caused by HP's own firmware update, but no dice. Tried a tweet to HP - also no luck. Tried again, had a nearly two-hour hold, couldn't understand the guy. Wasn't about to pay when the help was incomprehensible. So now I have a brick. And clients waiting. And a grudge.
I tried the fix suggested earlier in the forum - holding down the x and the right arrow while powering up. The printer showed ready...and made copies, but when I tried to print I still got printer errors saying the printer isn't connected to the computer.
So I went to system preferences and deleted the HP M1217, then went online and downloaded the HP driver again. Opened it up, but now during setup it wants the network address or network name for the desired printer. And I have no idea. I tried going on Safari and entering localhost:631/printers, but since the HP still isn't in the system, it doesn't show up. And maybe this wasn't even the right thing to try, but I'm getting no help from HP, and I'm not very technical. Argh.
Any thoughts? Or should I just chuck what was a wonderful device and never buy anything from HP again.
Thank you!!!

Hello SC_W,
The IP address can be fixed by going to Setup > Network Config > TCP/IP Config from the printer front panel.
Then select Manual and set the IP as manual.. I would using an higher value to avoid IP conflicts (e.g. if the current IP is 10.0.0.1, change only the last part to 10.0.0.20 so the address will remain and won't be used by other devices when the printer is powered off.)
Although I personally doubt it will help assigning a fixed IP as Mac OS X uses Bonjour hostname to communicate with the printer (which is fixed) and not athe IP address as Windows uses.
Additionally, as Apple products uses Bonjour, I could see some discussions on this matter for the Home Hub 3.0.
Below is an example:
https://community.bt.com/t5/Other-BB-Queries/HomeHub-3-Apple-Bonjour-not-working-for-AirPlay-AirPrin...
If setting a fixed IP does not help, try the folowing to isolate the problem and ensure if Multicast packets transfer may cause the issue:
From your Mac go to System Preferences > Print & Scan, click the Plus sign and then click the IP tab.
Select the HP Jetdirect Socket protocol and type the IP as the address value.
Add the printer, you will see an additional print queue listed as the IP address.
Keep using this queue for printing and let me know if you may se any difference for this print queue..
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Macbook air is stuck in a reboot loop after running Software Update. It looks like a firmware update is failing.

I have a first generation Macbook Air running Lion, and just ran software update to get the latest version of iTunes. It appears I may have gotten a firmware update mixed in the bunch, and now it keeps trying to run the update at boot, failing, and shutting down.
I can start the restore partition, and the system appears to function, but I cannot figure out how to abort this failing update so I can use my system, and determine which update is breaking it and why. I've tried resetting the firmware, but that didn't change anything.
There's nothing, not even a the CD drive plugged into the Air, so it's not a peripheral problem.
I could restore from backups, but that seems like a very brute force way to get rid of a firmware update loader.
Does anyone know how to disable these little beasts?

Restart the Air while holding down the shift key, this is safe mode. Once in to the login screen, login then hold the shift key again. It will disable login items, which can be the cause of startup problems. Remove all your login items from your user accout and try a restart (Note the login items if you need to re-add essential ones later). If it all works well, then keep an eye on third party startup items, they will cause you grief!

TS3499 2007MBP, L-shaped adapter, and a firmware update that didn't work.

My replacement L-shaped adapter worked for a day on my 2007 MacBook Pro, then stopped abruptly. I've tried the SMC reset as well as the firmware update. When I tried the latter, I received an alert that my computer does not need the update.
Please help me! This is driving me crazy. The only answer I can get online is to install the firmware update, but it refuses to install. I'm assuming that means I already have the update. What's the next step for someone in my situation?
I appreciate any help you can give me.

Were you ever able to get a resolution to this? I have an 2007 MBP 17" and bought a new adapter that stopped working after 2 weeks. I bought a brand new one today, it charged the battery to about 90% and then went dead. Now the LEDs won't turn on and it will not charge or power the computer. I think the issue is with the laptop but have no idea what it could be. Has anyone heard of this before or have any ideas on how to troubleshoot/fix this? I've checked the SMC firmware to make sure it is up to date, i've reset the SMC. i've left the adapters unplugged for a few hours....nothing has worked. Please help...

PRS-T1 Firmware update request

Good afternoon.
I recently (about a month ago) bougth two PRS-T1 readers (one as a gift) and I was very happy. I wanted a reader since I first knew of them and a T1 since it came out. I got a job as an intern engineer for the summer and saved to finally buy my gadget of dreams. I actually wanted to wait a little to see if a promotion came up because I lost the "free Harry Potter book combo", but I wanted to use the Reader for my school books and when the "almost free cover" promotion came up I inmediately ordered it.
Fast-forward a few weeks and I'm more than satisfied with my reader. Tablets are very common now, but everyone that sees the e-Ink screen working is thrown back in amazement. I carry it with me at all times (I hold it under my arm because I know keeping it in a bag has the risk of braking the screen) and my reading rate has improved vastly.
I've had the chance to find some areas of improvement on the Reader in the few weeks that I've had it with me and some of those were: being able to post in Facebook my reading status and maybe cite a phrase; and a native Evernote app, because while using the mobile site with the browser to view notes is actually neat, navigation and finding notes isn't, and neither is creating new notes. I supposed these were just remote dreams, knowing that just because you hope for, it doesn't mean a company will implement those features.
Well, imagine my surprise. New reader (it looks very similar to the T2 so no regrets there) with specifically the two functions I spent a month thinking would be great to have. Maybe they were so obvious it was inevitable, but still. Additionally, it seems too soon to drop support of the T1 after less than a year into its lifecycle.
So this is my request to Sony from a true fanboy: Please release a firmware update for the PRS-T1 to add the Facebook and Evernote features. I'd also suggest to remove the Google Books button and change it for one of the above or even a Wikipedia dedicated button, since I discovered that using the Reader is the best device for hours-long Wiki reading sessions.
Please consider my humble request. Maybe it turns out to be very easy to get done. Maybe not. Either way I'll keep enjoying the best e-reading experience with the best e-reader in the market and for that I'm very thankful.

Hello Rarsiii,
Welcome to the Users Discussion Forum. We will forward this to our Reader team and thank you very much for sharing your thoughts.

Home hub 5 firmware Update

Hi all got a firmware update this morning on Christmas Day (good timing bt ) it's now on
3. Firmware version: Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated 24/12/13
Looked through the online manager cannot really see any changes maybe just bug fixes. ?

Jaseb41 wrote:
I've had the hhb 5 since October and got to say I've had no problems with it at all I gave 2.4ghz and 5ghz. Separate ssids, turned smart wireless off and using the least congested channel on 2.ghz which is channel 6, turned off bt wifi and when using my iPhone 5 & iPad on 5ghz getting nearly full download speed of 60 meg +, it took a bit of getting used to coming from a hhb3b and openreach eci modem but good just to have one box and using less power, and my connection speed actually increased with the hhb 5 , I'm sure in time with more firmware updates it will become a better and more stable all in one solution for. Infinity
Did all that made no diffrerence whatsoever on the 2 HH5s i have tried. My Nexus 4 refuses to even connect to the 5GHz side of the HH5 and the difference using my Nexus 5 is pretty clear that the HH5 underperforms (similar results are seens with my PC). Once i can move the Christmas tree i am putting the OR modem on it as well because no matter what BT tell me my line can get it isnt managing a patch on my HH4 (which like a male genital i have sold) and the HH3 before that which was a rock solid 75/18 for 2 years. The HH5 barly managed 50/9 and thas with a maxuminum potential sync of over 110Mbit down 31Mbit up and i would like to rule the modem out before i smash it to little bits and buy another HH4.

Add firmware update to increase resolution to 4K

Similar Messages

Maybe you are looking for