Add Flash movie file to Image Library

I have a photo series of 6 shots I took of my friend being attacked by a large bird (Arizona Red-tailed Hawk) when he inadvertently came too close to it's nest. I took the shots using a fast action mode (Canon sport mode).
I noticed while in LR web preview when using the fade transition they look almost like a movie!
I would like to take my shots into Flash 8 and combine them into a single SWF file to better control the timing of the transitions and make them run as a single image in my gallery. I researched both the LR Help and this Forum but cannot find if I can include this movie in my web gallery. Can this be done?
BTW... the bird is fine. :)

Only by hacking the output files at this time. We have a web guru and a good hacker on hand. You may get further input on this.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Similar Messages

Cannot import a .mov file into the library

I am trying to import a .mov file into my library so I can
create a .fla file. Every time I try to import it into the library
using the import wizard, it starts the importing process and always
quits not quite two minutes into the process. It then returns me to
the front page of the import wizard. I have done this before with
absolutely no problems.
The one thing that I am wondering about is the size of this
particular .mov file. It is 377MB. Do you think this may be part of
my problem? Thank you in advance for anyone's input or
suggestions!

Jeremy Williams wrote:
> I am trying to import a .mov file into my library so I
can create a .fla file.
> Every time I try to import it into the library using the
import wizard, it
> starts the importing process and always quits not quite
two minutes into the
> process. It then returns me to the front page of the
import wizard. I have
> done this before with absolutely no problems.
>
> The one thing that I am wondering about is the size of
this particular .mov
> file. It is 377MB. Do you think this may be part of my
problem? Thank you in
> advance for anyone's input or suggestions!
I would consider 10mb to be too big for a flash file. Even if
it was CD
I would load it dynamically to avoid performance problem.
377mb is out of the question way beyond flash ability to
maintain stable
performance, not just the final output but the IDE itself.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Export a Flash Movie File

Can you Export Flash Movie files to other formats?? Don see
an Export to other File options.
Would like to Export a Flash Movie or SWF file to a Quicktime
or IPOD MPEG File.
Anyone know where to do this? Do not see an Export to File
option to that Format on Flash Pro CS.
Thanks

Without seeing your movie, its difficult to tell where the
problem may be. My first guess is that the data rate is to high.
You will probably need to choke that back in some way: lower the
data rate for the compressor, reduce the frame rate, reduce the
image size, reduce the color depth, etc.
When you select to export to QT, for example, a new window
opens to let you select some basic settings. At the lower right of
that window is a button titled "Quicktime Settings...". Click that
button and a new window will open that will allow you to set the
compressor, frame rate, quality, etc.

My itunes can not import or add AVI movie files created by Canon PS SD450.

How can I play my movie shot by Canon PS SD450 on my new iPOD? My itunes (7.0216) can not import or add the AVI movie file to its library. Please advice.
Laptop Fujitsu S2110 Windows XP Pro Canon PowerShot SD450 movie file (AVI)

I am having the same issue so if anyone knows how to fix it that would be great.

Why I cant add some video files to itunes library?

I have got new ipad 32gb model. I thought I will play some song videos or movies on it from my PC. I added video files to the itunes library. But I see only few files that are added to the itunes library. I cant add some video files to itunes library no matter what I do. Due to that I cand all movies to my Ipad. Please help!

Hi like to explain my experience,
I am using Windows 8 PC and Windows 7 Lap top.
I convert my video to ipad format and add to library in the itunes.
But it was not accepting and these steps worked for me.
1.Convert your video using videoconverters. For freemake video converter works well. You can also use Quicktime pro or Miro video converters. There are many softwares freely avilable.
2.Connect your i pad to your PC/ Laptop.
3.Open your itunes, it should show your ipad and Library.
4.Open the folder of your converted video and try to opening it using itunes by right click.
5.Your converted movies will open in itunes and add to home sharing videos in Library movie option after you login with your apple id.
6.Slect sync movie option and syncronising it.
7.It will come in ipad

How to add a .mov file to i tunes

how to add a .mov file to i tunes

Export to master file. Use H.264 and in the When Done selection pick iTunes library or whatever.

My itunes stops working when i try to add a music file to the library. how do i fix this?

when I open iTunes and try to add a music file to my library from my computer, I slecet the song and click open and then it just comes up with the error message saying that iTunes has stopped woking and closes the program... ive tried everything- uninstalling and reinstalling the program and even disabling my antivirus software. I have no other ideas about how to fix this?

If you are still having this problem, the fix below takes care of it. It was posted in another conversation by Sony Singh. I did it, rebooted, and all works!!
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
Hope this helps or you've already done the fix, especially since you posted in October.

How do I move files from Event Library to Project Library?

How do I move Files from Event Library to Project Library? I tried drop and drag, that didn't work. I am new to Apple. I have always had a windows box b4 this. If anyone can help, please do. Thanks
Alain

welcome argardner to the  boards..
you're missing the concept of iM .. you don't move 'files' from Event to Project Library.. Events is the big box of all your imported clips; now, from that box of bricks, you drag the clips into all kind of projects.. you can 're-use' the same clip again'n again in many projects.. you can use all clips of all Events in one Project.. or all clips of one Event in two projects.. or..
spend some time here:
http://www.apple.com/ilife/tutorials/#imovie
http://manuals.info.apple.com/en/iMovie08_GettingStarted.pdf
the concept of Events & Projects, Clips and Libraries is at first glance very different to 'normal' editing apps, but you'll get convenient to it within minutes..

SharePoint 2010 Allow User to Add Comments to Files in a Library and to the Header of the Web-Page

(1) I need to allow an end-user to be able to add comments to files either when they are added to a library or after they are added. I didn't see a Column available for adding to a Document Library for "Comments".
(2) I need the same user to be able to add text/comments to the Header of the web-page that contains the library (above the library at the top of the screen).
When I (the SP Admin) add the "Content Editor Web-Part" to the top of the web-page that contains the Document Library, the Toolbar disappears. The Content Editor Web-Part would be ideal to allow the end-user to add comments to the Header, but I
really need the Toolbar available.
Is there another Web-Part that I could use for allowing comments to be added to the Header of a web-page without disabling the Toolbar, or is there a known-fix for allowing the Toolbar to be available and functional after adding a Content Editor Web-Part?
JCashon

Hi,
According to your post, my understanding is that you want to add Comments to Files in a Library and to the Header of the Web-Page.
(1)If you use the document content type in the library, it will contain the “Comments” field automatically. When you add the document, you can enter the conments. You can also edit the “Comments” field after the document added.
(2)If you add the add the "Content Editor Web-Part" to the AllItem.aspx Page, you can add the text to the web part as the Header.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Export for flash-movie file conversion.

I want to prepare files for the highest quality possible for conversion to flash-movie files. I recorded in HDV- edited in HDV- send to Color in HDV- and now my question is if I should send it to FCP from Color in 10 bit-uncompressed to keep the highest quality?
Also at the end exporting from FCP- should I change my sequence settings? Again I need the very highest quality for later conversion to a flash-movie file, and was told that uncompressed is the way to go??
Any thoughts on this?
Thanks- Adam.

"Keeping" the quality isn't really the issue-- if you're working in HDV, there's nothing to gain by going to Uncompressed, because you weren't working in Uncompressed in the first place. The exception to this is color grading and graphics: ideally, you would be working in a higher quality sequence such as ProRes (Uncompressed is probably overkill) in both FCP and Color.
Of course, I can't honestly say that any of this will make a difference in a Flash movie-- Flash is for web delivery, and to bring it down to a bitrate suitable for the web, you'll likely lose anything you might have gained from this process.

I can not add a wmv file to the library. It is not protected

Can not add a video file to Itunes library and even when I try to open the video using "open with Itunes", Itunes start but instead of the video I see the music library

iTunes cannot play nor convert WMV files. You'll need to use a third-party application to convert the video to a format iTunes can accept.
http://support.apple.com/kb/HT2729
Regards.

Playback of sounds from flash movie files in authorware

Ive imported a flash movie file into authorware but the sound
is not playing back. In flash, I created a movie that includes
graphics and sounds. The movie plays perfectly when I open the
flash player but it doesnt play when imported into Authorware. Ive
tried publishing the flash file as quicktime but had a problem with
the handler on my computer. Does anyone have any
suggestions?

If you click the 'Options' button on the Property panel for
the Flash
movie, is the 'Playback > Sound' checkbox actually checked
in the
resulting dialog box?
When published as QT, what does 'had a problem with the
handler on my
computer' mean? Do you have QT installed on the playback
machine? Are
you using Insert > Media > Quicktime?
Erik
dcastil4 wrote:
> Ive imported a flash movie file into authorware but the
sound is not playing
> back. In flash, I created a movie that includes graphics
and sounds. The movie
> plays perfectly when I open the flash player but it
doesnt play when imported
> into Authorware. Ive tried publishing the flash file as
quicktime but had a
> problem with the handler on my computer. Does anyone
have any suggestions?
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

Possible to add non-movie files in Encore?

I am interested in making a menus dvd, but which besides
normal movies files, contains an ebook probably in pdf. Ideally a menu icon in the dvd would open the pdf, but simply having the file present on the disc is better than nothing. Can this be done in Encore, and if so, how?
I've run some searches but maybe am not using good search terms and come up empty. Proper search term suggestions would also be welcome. Thanks

Actually opening non-movie files in a DVD player is not part of the DVD specification... a DVD player is not a computer... so this does not work
As mentioned, you may add a folder to the ROM content... and then make an entry in your video (such as a menu that is only a title) telling the user to take the disc to a computer to access the files
Web or Internet functions on a DVD
Macromedia Director http://www.adobe.com/products/director/ for mixed content
-or some functions via Flash http://forums.adobe.com/thread/871391?tstart=0
-or ROM Content and a note http://forums.adobe.com/thread/883630?tstart=0

Move file from one library to another library via SharePoint 2010 Designer Workflow

Can SharePoint 2010 designer be able to move a file from one library to another using workflow? I tried to use the copy list item but it won't show my destination library. I prefer not to use the 3rd part workflow like
http://www.codeplex.com/SPDActivities
Please advise.
Brian
Brian

Hi Brain,
From your narration, I undersatnd that you want to move document to another library across site or site collection. However,
the copy list item action is used for coping list item to another library or list in the same site, so you can’t achieve it through ootb workflow action. So to move document to another library across site under the same site collection, then you can use site
content and structure. If across site collection, then I suggest you use that the 3<sup>rd</sup> part workflow action.
For more information about site content and structure,
http://office.microsoft.com/en-us/sharepoint-server-help/work-with-site-content-and-structure-HA010131723.aspx
Best Regards.
Kelly Chen
TechNet Community Support

How To Add Flash Movie In Java Application

Hello Every One
I am facing a problem.
I want to add a flash movie
Plz Help Me

Flash Player Java Edition is available - but only for old Flash V.2 :(

Add Flash movie file to Image Library

Similar Messages

Maybe you are looking for